Used Radial Riveter for sale (979)

Condition: new, Year of construction: 2023, total length: 44,000 mm, total width: 1,000 mm, Empty weight: 37.000 kg Kfedex D A S Ujpfx Aanoa Productivity: 1000 tph 1000x44400mm radial telescobic conveyor General Tech Spec of 150 Feet Radial Belt Conveyor Drive System Direct Accoupled Drive Drum 323* 12 mm rubber coated Reducer Yılmaz KR Series-VOLT 50hz-380V Bed Type SNH Series Felt Cast Iron Bed with Over Lubrication Platform Single Sided Walkway on main belt Band Tape TS 542 Norm 4 Layers, 4/2,10mm Width Direction Roll 12 units Nominal Capacity 800-1000 tph Drive 2.5” Standard Kingpin Paint Acrylic Raised stockpile height 15 meters Lowered stockpile height 4,3 meters Belt widths: 1200mm(26 meters)-1000mm(22 meters) Stinger width 1000* 19000mm Radial Drive Eletrical Motor/Gearbox connected to wheels by chain Radial Move 5 degrees Belt Rear Mounted on static pivot Stockpile capacity at 270 degrees15m height 140900 metric tons Drum 323mm dia, anti material sticking Main Belt 2x22 kw Motor Gearbox Stinger Belt Conveyor 2x22 kw Motor Gearbox Radial Tires 8 pcs- 315*65*22,5 Chained to Motors Radial Drives 2 pcs 3 kw Motor Gearbox Total Power 95 kw Transport Weight 35 tons Transport Dimensions 4400x29300x3500mm Control Full Automatic remote controlled Automation component Siemens Radial Tyres Hydraulic Swing for erection Erection Hydraulic Jacks for elevation Scraper Available at main belt and receiving hopper Cleaning Both belts have cleaning scraper under drive drum Receiving Chute included Discharge Chute to stinger belt Included Impact rolls Included at receiving chute section Control panel LCD screen and piano panel for back-up With Polypole automatic piling software and Siemens PLS option Fast delivery, high,quality, economical

Condition: excellent (used), Year of construction: 2019, Motor power 1.5 kW Saw blade speed 2800 rpm Saw blade DM 250 mm Saw blade bore 30 mm Cutting length 400 mm (with 20 mm workpiece thickness) Cutting length at 45 degrees 230 mm Cutting depth 65 mm Swivel locking of the arm +/- 45 degrees Weight 140 kg Motor protection switch Brake motor Emergency stop switch CE including dust collection hood for extraction connection DM 120 mm Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. Kfodsulzchepfx Aanoa - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: good (used), Year of construction: 1965, functionality: fully functional, throat depth: 930 mm, For sale is a Donau brand DR30 high-speed radial drilling machine. The machine is in good and fully functional condition. Technical specifications: Year of manufacture: 1965 Drilling capacity in steel (diameter): approx. 30 mm Tapping capacity in steel: approx. M36 in cast iron Spindle mount: MK 3 Spindle speeds: Continuously variable approx. 45 - 2240 rpm Quill stroke: approx. 170 mm Thrust: approx. 930 mm Boom swivel range: 360° Table size: 1200 x 500 mm Spindle motor power: 4.0 kW Weight: approx. 1.8 t Dimensions (L x W x H): approx. 1.3 x 2.1 x 2.45 m Tapping device with shut-off and reversing. Motorized boom height adjustment. Left-hand drilling control, hand and foot. Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Machine Purchase/Sale Kodswal Hpjpfx Aanjfa PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website.

Condition: used, Year of construction: 1969, arm length 1600 mm taper MK 5 Würfel Kfodpfsx H Txtsx Aanoa

Condition: new, RHP Bearings Radial - ball bearing MJ4.1/2JC3, unused, in original box, 100% functional Kfodpfx Aasi Ec Dbsnja

Condition: ready for operation (used), functionality: fully functional, Radial drill, Csepel RFM 51, used machine Manufacturer: Csepel Model: RFM 51 X-axis length: 4000 mm Arm travel: 3100 mm Radius: 2460 mm Distance from base to spindle: 1660 mm Ksdpowcqlcofx Aanofa Drilling capacity in steel: 100 mm Drilling capacity in cast iron: 120 mm

Condition: new, Year of construction: 2024, Field of application: Mining 1400x60000mm radial telescobic conveyor General Tech Spec of 180 Feet Radial Belt Conveyor Drive System Direct Accoupled Drive Drum 323* 12 mm rubber coated Reducer Yılmaz KR Series-VOLT 50hz-380V Bed Type SNH Series Felt Cast Iron Bed with Over Lubrication Platform Single Sided Walkway on main belt Band Tape TS 542 Norm 4 Layers, 4/2,10mm Width Direction Roll 12 units Nominal Capacity 1200-2500 tph Drive 2.5” Standard Kingpin Kjdpfx Aasx D A R Ronjfa Paint Acrylic Raised stockpile height 22 meters Lowered stockpile height 4,3 meters Belt widths: 1400mmx58000 meters Radial Drive Eletrical Motor/Gearbox connected to wheels by chain Radial Move 5 degrees Belt Rear Mounted on static pivot Stockpile capacity at 270 degrees22m height 240900 metric tons Drum 323mm dia, anti material sticking Main Belt 2x45 kw Motor Gearbox S Radial Tires 8 pcs- 315*65*22,5 Chained to Motors Radial Drives 2 pcs 3 kw Motor Gearbox Total Power 145 kw Transport Weight 35 tons Transport Dimensions 4400x42300x3500mm Control Full Automatic remote controlled Automation component Siemens Radial Tyres Hydraulic Swing for erection Erection Hydraulic Jacks for elevation Scraper Available at main belt and receiving hopper Cleaning Both belts have cleaning scraper under drive drum Receiving Chute included Discharge Chute to stinger belt Included Impact rolls Included at receiving chute section Control panel LCD screen and piano panel for back-up With Polypole automatic piling software and Siemens PLS option Fast delivery, high,quality, economical

Condition: good (used), 1 used rapid radial drilling machine Manufacturer: Donau Model: DR 40 Z No. 1117-5 Technical Data: - Drilling capacity in solid steel ST 60: 40 mm - Drilling capacity GG 25: 50 mm - Thread cutting in ST 60: M 33 - Thread cutting in GG 25: M 45 - Drill spindle mounting: MK - Spindle diameter: 55 mm - Quill stroke: 200 mm - 18 spindle speeds: 35–1800 rpm - Drilling feeds: 0.075–0.60 mm/rev - Drill column height adjustment: 450 mm - Drilling radius min/max: 305 / 1005 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space required: approx. W 1900 x H 2800 x D 2300 mm Kfjdpsx Hpxpjfx Aansa - Weight: approx. 1800 kg Technical data subject to change/errors excepted.

Condition: used, Year of construction: 2008, bore capacity in steel (diameter) 40 mm throat max. 370 - 940 mm workpiece height max. 700 mm spindle taper MT 4 spindle turning speed - stepless 50 - 2.000 U/min quill stroke 200 mm feed range - boring 0,08 - 0,50 mm/U Table dimensions 1.220 x 520 mm thread cutting attachment M 30 voltage 400 V total power requirement 4,1 kW weight of the machine ca. 2,6 t dimensions of the machine ca. 1,35 x 2,40 x 2,40 m - Serial-No.: D05080 / 148263 - Automatic vertical feed 0.08/0.12/0.17/0.24/0.35/0.50 mm/rev - Thread cutting device - Digital drilling depth display - Digital speed display - Stepless speed - 2 gear stages - Cube table 600 x 300 x 450 mm Kfjdpfx Asx Hpz Roanja side-mounted - Quick-action drill chuck Ø 3 - 16 mm - Coolant device

Condition: used, Year of construction: 1960, arm length 1600 mm tool adaptor ja fabric-no. 9787 weight 4,6 t with drill cube Kfodpfjx Ik Unex Aanja

Condition: used, Year of construction: 2006, Radial Drilling Machine Manufacturer: Valmer Model: TR 80/2500 SP Year of manufacture: 2006 Kedpfx Ajw Dbgyjanofa Table dimensions: 1,000 x 800 x 560 mm Max. drilling diameter: 80 mm Max. tapping diameter: 42 mm Max. distance spindle axis/column: 2,500 mm Min. distance spindle axis/column: 500 mm Horizontal head travel: 2,000 mm Max. distance spindle nose to working surface: 2,000 mm Min. distance spindle nose to working surface: 550 mm Spindle stroke: 450 mm Morse taper: MT 6 Power: 7.5 kW Machine dimensions: 3,730 x 1,400 x 3,825 mm Weight: 11,000 kg 161225ä

Condition: used, Year of construction: 1968, Donau high-speed radial drill type DR 32 Speed: 60 - 1800 rpm Kjdpjx Hgkvjfx Aanjfa Arm reach: 600 mm Base plate: 100 x 1400 x 110 mm Thread cutting device Coolant system Machine lamp Quick-change holder with inserts Machine vice

Condition: as good as new (ex-display), The ZR 60 S VT is a state-of-the-art radial drilling machine that belongs to the renowned category of Radial Drilling Machines by KNUTH. Designed for precision and versatility, this machine simplifies the drilling, countersinking, and tapping processes, making it ideal for one-off and small batch production in fields like maintenance, toolmaking, and steel construction. The ZR 60 S VT features a robust design with a base, column, boom, and gear head crafted from high-quality cast materials. Its user-friendly control interface includes a large touchscreen for easy operation, while an electronically controlled servo motor provides efficient quill feed adjustment. With a maximum drilling capacity of 60 mm and an extensive throat range, operators can expect smooth functionality and enhanced reliability during everyday tasks. The advanced coolant system and convenient maintenance features add to its appeal. Request a quote today to enhance your production capabilities with this reliable Radial Drilling Machine from KNUTH. Ksdpev D Uqmofx Aanjfa

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Kfjdpfx Aslhwr Reanoa Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Year of construction: 1996, condition: ready for operation (used), This Emmegi Radial Star TU/6 was manufactured in 1996. A used double miter saw, it features a roller conveyor, clamping device, and upgraded PC control. Its design is precise, stable, and robust, ideal for detailed metal sawing tasks. Consider the opportunity to buy this Emmegi Radial Star TU/6. Contact us for more information. Kfsdsx D D Auepfx Aanea Application Types Sawing

Condition: good (used), Radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, fan, ventilation blower -Manufacturer: Fischbach, Radial fan extraction blower type SD5-640/ E 351-4 -Motor power: 0.95 kW -Volume flow rate: 0- 3210 m³/h -Air duct connection: 290 x 145 mm -Number: 4x blowers available -Price: per piece -Dimensions: 420/340/H365 mm -Weight: 16.6 kg Ksdpfxjqmt Ars Aanefa

Condition: used, Year of construction: 1972, bore capacity in steel (diameter) 50,0 mm arm length 1.350 mm workpiece height max. 1630 mm Kfodpewiikdofx Aansa turning speeds 19 - 1320 U/min bore spindles - Morse Taper 5 MK engine output 5,5 kW weight 5 t range L-W-H 2,4 x 1,0 x 3,55 mm feed movement 475 mm floor plate size: 1650x1000 mm feeds 0,07-2,9 mm/U

Condition: ready for operation (used), Technical data without guarantee Working range Drilling capacity: 60 mm Drilling capacity, cast iron: 70 mm Tapping capacity, cast iron: M 50 Tapping capacity, steel: M 45 Max. drilling depth: 315 mm Swing: 350 mm - 1600 mm Distance spindle nose - table surface: 350 mm - 1250 mm Drill head travel (horizontal): 1250 mm Main spindle Kfedjw Ilrmspfx Aansa Speed range: 38 rpm - 2000 rpm Spindle taper: 5 MT Feed Feeds: 0 mm/min - 300 mm/min Drive power Main drive motor power: 4 kW Lifting motor: 1.5 kW Dimensions and weight Dimensions (L x W x H): 2.49 m x 1.05 m x 2.78 m Weight: 3800 kg

Condition: new, The R 32 Basic is a robust radial drilling machine ideal for those entering the world of Radial Drilling Machines, offering an exceptional drilling capacity of 32 mm (1.26 in) and a throat depth ranging from 320 to 820 mm. This model, part of the renowned R Basic series, features manually switched gears and manual clamps, ensuring ease of use while maintaining a stable and reliable performance suitable for various applications, including workshops and steel construction. Built from high-quality fine-grain cast iron with heavy ribbing, the machine minimizes vibrations, enhancing operational precision with its precision-ground gears. It includes a standard cube table for handling smaller workpieces, making the R 32 Basic a powerful addition to your workshop. Equipped with features such as motorized arm height adjustment and mechanical clamping for important components, this radial drilling machine is designed for your operational needs. Buy now to experience the efficiency of the R 32 Basic, a standout in the Radial Drilling Machines product group. Kfedpfsu E Hzkex Aanoa

Condition: used, Year of construction: 1980, total width: 700 mm, total length: 900 mm, total height: 1,700 mm, - Year: 1980 - Documentation available: No - CE certificate present: No - Main motor power [kW]: 2.2 Kfjdpfxsx Eydmo Aanoa - Max. saw blade diameter [mm]: 300 - Voltage [V]: 380 - Current consumption [A]: 5.5 - Power [kW]: 2.2 - Transport dimensions: 900mm x 700mm x 1700mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1962, arm length 1250 mm taper MK 5 Kjdpfx Asx Edwzsanjfa Bohrwürfel

Condition: used, Year of construction: 1960, Technical details: Kfsdpex Afn Nsfx Aanja workpiece height max.: 600 mm Arm length: ca. 700 mm bore capacity in steel (diameter): 25 mm Table dimensions: 1100 x 400 mm

Condition: used, Year of construction: 2018, bore capacity in steel (diameter) 50 mm arm length 1600 mm spindle taper: MT 5 distance spindle/base plate 350 - 1220 mm Column diameter 350 mm spindle turning speed range 25-2000 U/min feed range - spindle 0,04-3,2 mm/U number of feeds 16 horiz. adjustment of drilling head 1250 mm bore cube 500 x 500 x 620 mm total power requirement 4,0 kW weight of the machine ca. 3,5 t dimensions of the machine ca. LBH 2,5 x1,25 x 2,9 (2,7) m Very lightly used radial drilling machine Kjdpfx Aox A H Udoanefa Includes 1.0 x 1.0 x 0.5 m drilling cube Includes 0.5 x 0.63 x 0.5 m drilling cube Includes vise Includes tool cabinet Includes quick-change chuck system Includes drill bits and other accessories Includes work light Includes coolant system Includes central lubrication The robust cast iron construction guarantees maximum stability and a long service life. The modern design ensures quiet operation and ergonomic handling. The controls are clearly arranged, enabling intuitive operation. The hydraulic transmission offers pre-selection for speed and feed rate, as well as hydraulic clamps for the boom, column, and drill head. The motorized height adjustment allows for precise and comfortable drilling processes. For maximum durability, the gears and guideways are hardened and ground. Additional features such as a tapping attachment, a drilling depth limiter, and a feed overload clutch expand the machine's application possibilities.

Condition: repair required (used), Year of construction: 2013, operating hours: 50,000 h, functionality: limited functionality, overall weight: 19,200 kg, fuel type: electric, color: blue, V2002A VAPOUR RADİAL FAN Production: PİLLER Year of manufacture: 2013 Power: 560kW, 560A, 690 VOLT VFD ACS 800,ABB electric motor RPM: 3806 Dıscharge pressure saturated :1825 mbar Mass flow vapour: approx. 26130 kg/hour Suction side:DN400 Pressing side: DN400 Impeller diameter: 1410 mm, Impeller material: Duplex 1.4462 Overall dimensions: Height 2250 x width:1250 x length:3450mm Kodpfx Asxwyaijanofa Net weight with engine: approx. 6.5 t SKF Block bearing : 1036019-09 (squeeze oil damper) V2002B VAPOUR RADİAL FAN Production: PİLLER Year of manufacture: 2013 Power: 630kW, 630A, 690 VOLT VFD ACS 800, ABB electric motor RPM: 3806 Dıscharge pressure saturated:2371 mbar Mass flow vapour: approx. 26710 kg/hour Suction side:DN400 Pressing side: DN400 Impeller diameter: 1410 mm, Impeller material: Duplex 1.4462 Overall dimensions: Height 2250 x width:1250 x length:3615mm Net weight with engine: approx. 7.2 t SKF Block bearing : 1036019-09 (squeeze oil damper) V2002C VAPOUR RADİAL FAN Production: PİLLER Year of manufacture: 2013 Power: 500kW, 500A, 690 VOLT VFD ACS 800, ABB electric motor RPM: 3806 Dıscharge pressure saturated:2900 mbar Mass flow vapour : approx. 27278 kg/hour Suction side:DN400 Pressing side: DN400 Impeller diameter: 1260 mm, Impeller material: Duplex 1.4462 Overall dimensions: Height 2250 x width:1250 x length:3491mm Net weight with engine: approx. 5.5 t SKF Block bearing : 1036019-09 (squeeze oil damper) Microcracks on casings and on impeller B. Air cooling of M3BP 355LKB2 IMB3/IM1003 ( 560 kW ) motor is improved with a higher capacity cooler. Old one is also available.

Condition: new, The KNUTH R 60 V is a powerful and versatile radial drilling machine designed for exceptional drilling, reaming, and countersinking in steel or cast iron, making it a preferred choice among professionals in production and construction companies. This robust machine features a premium construction with a large column and a highly torsion-resistant boom, ensuring maximum rigidity and minimal clamping offset. With its motorized boom height adjustment and oil-bath lifting gears, operators experience smooth handling, even with large and heavy workpieces. Additional highlights include infinitely variable spindle speeds with a digital display and an integrated coolant system, ensuring reliability and cost-effectiveness. The R 60 V, part of the renowned Radial Drilling Machines group, stands out for its modern design and user-friendly operation. Contact us to request a quote and elevate your drilling capabilities with KNUTH’s exceptional machinery. Kjdpfxjuyic He Aanefa