Used Recooler for sale (48)

Condition: used, Cooling unit, cooling water recooler, water chiller, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity: approx. 8 kW Rated power of cooling unit: 3 kW Iajdpjpu R Ncsfx Amyet Refrigerant: R422D Water tank volume: approx. 35 liters Circulation pump flow rate: 40 liters/min Pump output: 0.63 kW Water connections: 1/2 inch Power supply: 380 Volt, 50 Hz - Temperature setting via rotary potentiometer Space requirement (L x W x H): 1100 x 750 x 140 mm Weight: 285 kg

Condition: used, Cooling unit cooling water cooler ARO type VWK 31/1-S Factory number year of manufacture 2007 Cooling capacity 3500 watts Ambient temperature max. 32°C Refrigerant R407C Refrigerant filling quantity 0.98 kg Operating pressure of cooling compressor max. 29.5 bar Water tank capacity approx. 8 liters Discharge volume of circulation pump 27 liters/min. (1620 liters/h) Water connections quick release coupling Rectus type 26 Power connection 230 volts, 50 Hz, 2.2 kW - Temperature setting via DANFOSS thermostat controller - Built-in circulation pump (250 watts) Iodpfx Asvw A T Njmyjat Space requirement L x W x H 700 x 550 x 520 mm Weight 75 kg Good condition

Condition: used, Year of construction: 2010, functionality: fully functional, cooling capacity: 172.5 kW (234.53 HP), type of input current: three-phase, overall weight: 481 kg, input voltage: 400 V, Equipment: type plate available, Güntner table-top recooler with two fans. Description as per the attached data sheet. Multiple units available! Iajdpfx Amsy Dipcjyjt

Condition: ready for operation (used), Year of construction: 1987, Recooling capacity at water flow temperature of 15/10°C: 2.3/2.1 kW Iasder Ezdrjpfx Amyst Volume flow: 0.5 m³/h electrical Connection: 380 V, 1 kW Space requirement: 900 x 600 x 1020 mm Weight: 160kg Water connections reduced to 1/2".

Condition: ready for operation (used), Year of construction: 2021, Aermec ANL 202 Q Chilled Water Recooler Iasdpfx Amjywtpmeyet Approximate dimensions: 1750mm x 750mm x 1450mm (W x D x H) Weight: approx. 450 kg Cooling capacity: 43.00 kW Year of manufacture: 2021 You are welcome to arrange a viewing appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided you have a valid VAT ID. Subject to prior sale. Visit our shop to see our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Please note that technical specifications may vary and errors in the item description cannot be ruled out and are subject to change.

Year of construction: 2011, condition: ready for operation (used), A compact ammonia refrigeration system GEA with evaporative condenser and pump-operated plate evaporator is available. Design: split design, refrigeration capacity: 247kW, compressor speed: 1450rpm, evaporation temperature: 0.7°C, condenser capacity: 300kW, wet-bulb temperature: 21°C, max. condensing temperature: 35°C, refrigerant: NH3, max. operating pressure high pressure/low pressure: 23bar/16bar. Secondary refrigerant: electrolysis water, secondary refrigerant temperature inlet/outlet: 6°C/2°C, secondary refrigerant volume flow: 54m³/h, secondary refrigerant pressure drop: 53kPa, refrigerant charge: 50kg, oil charge: 20l, compressor: Grasso 410. Machine dimensions X/Y/Z: approx. 4300mm/2000mm/2800mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Isdpfx Aox Sywaomysat

Condition: good (used), Autotherm ATK 2000 cooling system 20.5 kW recooling system in 20-foot container Technical data Rated voltage: 3/PE AC 50Hz 400V (DIN IEC 38) Nominal output: 20.5 (31.5) kW Rated current: 50 (71) A Supply line fuse protection: 80A Mechanical data Dimensions: (W x L x H) 2430 x 6800 x 4350 mm Weight: 4800 kg Flow: Flange SDIN2633 DIN100 PN16 Return flow: Flange SDIN2633 DIN100 PN16 Overflow / drain: 2” female thread Inlet well water: 2” female thread Well water drain: 2” female thread Adiabatic inlet: 3/4” female thread Filling: manual 3/4” female thread Water circuit Heat transfer medium: Water/glycol ( 90% / 10% ) Flow pressure: max. 10.6 bar Tank volume: 4000 liters Free cooler circuit Pump type: Grundfos CR 45-1-1 A-F-A-E-EUUE Delivery pressure: ... 2.15 bar Flow rate: 58 m³/h Consumer circuit Pump type: (pressure booster system) Grundfos Hydro 2000 ME 2 CRE 32-6 A-F-A-E-EUUE Delivery pressure: max. 10.6 bar Flow rate: max. 40 m³/h Container 20-foot AIS-DSC-22-28 External dimensions mm (LxWxH) 6,058 x 2,438 x 2,591 Internal dimensions mm (LxWxH) 5,898 x 2,352 x 2,390 Internal floor area m2: 13.88 Control 2000 ME compact control unit Compact microprocessor control unit for infinitely variable control and cascade control of pumps with MGE motor with integrated frequency converter for demand-dependent, energy-optimized operation of multi-pump systems. With automatic activation and deactivation of the individual speed-controlled pumps by a digital controller adapted to centrifugal pumps. Grundfos R100 infrared manual control and diagnostic device for commissioning, data monitoring, reading out fault messages and configuring Grundfos pumps. Financing through our bank is also possible. komplett-konzept.leasingo.de Iaodouzhcuspfx Amyot Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Water cooler with refrigeration compressor Make DALEX TYPE ES 1 Iasdeva Eawspfx Amyst cooling capacity 870 W with connection cable and mains plug for 230 V 50 Hz connection suitable for resistance welders up to 40 kVA rated power

Condition: excellent (used), Year of construction: 2007, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Travel: X axis: 600 mm Y axis (changeover position): 600 (975) mm Z axis: 500 mm Control: Siemens 840D control, side-mounted Feed/Rapid traverse speeds: X, Y, Z: 1 – 45,000 mm/min Max. feed force X, Y, Z: 15,000 N Average acceleration: X, Y, Z: 2.5 m/s² Measuring system: Direct measuring system X, Y, Z Spindles: Spindle speed (infinitely variable): 20–10,000 rpm Torque: 2 x 363 Nm (S6/40% duty cycle) Power: 2 x 38 kW (S6/40% duty cycle) HSK-A 100, horizontal tandem arrangement Spindle distance: 600 mm Spindle bearing diameter: 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing carrier with spur gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec 2 NC rotary tables, hydraulically clamped, max. workpiece weight 700 kg, table speed 25 rpm Partition between machining and loading area Tool magazine: 2 x 50 tools HSK-A 100 chain-type magazine Tool change time (chip-to-chip): 4.48 sec Max. tool diameter: 100 mm 250 mm with adjacent slot free Iedsy Swq Ropfx Amysat Max. tool length: 420 mm Max. tool weight: 20 kg Equipment: Central lubrication Oil minimum quantity lubrication (spindle lubrication) Chip conveyor (hinged belt conveyor) Coolant purification with compact band filter Hydraulic unit Maintenance unit Water recooler Full enclosure, crane loading possible Dimensions: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Year of manufacture: 2007 Other features: Very good condition Setup parallel to main time Available from December 2023/January 2024

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 400 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 550 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840 D SL, overall weight: 21,000 kg, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 80, number of axes: 5, This 5-axis SCHMID SE 368 horizontal machining centre was manufactured in 2019. It features a Siemens Sinumerik 840 D SL control, rapid traverse rates of 75/40/90 m/min in X/Y/Z, and a shuttle table. Equipped with dual NC rotary swivelling units, a 30-fold tool changer, and HSK-A63 tool holder. Max speed is 10,000 rpm. Includes a chip conveyor and recooling system. A great opportunity to buy this SCHMID SE 368 horizontal machining centre. Contact us for further details regarding this horizontal machining centre. Additional equipment • Double spindle • Shuttle table • 2x 2 NC rotary swivelling units • Switch cabinet system • Chip conveyor Knoll 600K-1 2019 • Hydraulic unit • Filter system • Recooling system Lahntechnik KOF1803-100 2020 Iodpfx Amjyyuwweysat • Number of tool magazine positions: 2x 30 • Rotary table (NC / hydraulic clamping) : n x 360o, vertical axis, Machine Benefits Technical Machine Benefits • Ibag three-phase main drive : s1-100% 40 kw / s6-40% 52 kw • Key performance data working spindle kw s1 : 3 12 29 40 40 • Spindle speeds approx. 1/min : 1,000 5,000 10,000 20,000 24,000 • Torque approx. Nm : 27 27 27 19 17 • Tool diameter with free neighbouring positions : 125 mm • Swivelling table (nc / hydraulic indexing) : vertical axis, 0° - 180°, max. Rotation angle in connection with 5th axis : +/- 150° • Rotary table diameter : 400 mm, rotary table (horizontal axes u1-u2/ v1-v2), rotary table (nc / hydraulic clamping) : n x 360o, vertical axis, rotary table diameter : 330 mm • Pallet clamping : 2 zero point clamping modules/ table • Position measuring systems : absolute position measuring systems • Position tolerance x - y - z : 0. 008 mm (vdi/dgq 3441) Extra Information Machine still under power

Condition: used, Spraying the full product with cold water to cool it down to approx. 40 °C. Allows clean labelling and creates a vacuum in the bottle. With cooling tower for recooling the spray water from the tunnel cooler with recirculation. Additional title: full product cooler, with splash water recooling Capacity of filling line: 5000 bo/h Iaodpfx Amjw Tmpdoyot Features: Cooling tower for spray water recooling with circulation (Richter Cooling Systems, 2015)

Condition: used, Make: WMZ / PITTLER, Model: PVSL N1 2/2, Year of manufacture: 2009, Machine no.: ZN022, Control: Siemens Sinumerik 840D sl Powerline including handwheel, 2 spindles, 2 workspaces, 2 cross slides, max. turning diameter: 140 mm, max. workpiece height: 80 mm, max. spindle speed: 6,300 rpm, 2x 8-position turrets, driven tool stations, chip conveyor by Knoll, extraction unit by ILT, recooling unit by Hydac, workpiece automation with raw part and finished part storage +++ Note: Machine is part of an online open sale! +++ Iaodpfx Amex Ahfwsyst

Condition: used, Make: BUDERUS, Model: CNC235, Year of manufacture: 2007, Machine no.: 9030, Control system: Siemens brand, Type: Sinumerik 840D sl Powerline, 2 workspaces, 2 cross slides, X/Z traverse path, 2 spindles, Speed, C-axis workpiece spindle: 3,000 [rpm], High-frequency internal grinding spindle: (51,000 [rpm]) (for grinding arbor), Max. feeds Z 30 m/min, X 90 m/min, Max. workpiece diameter: 100 mm, Max. workpiece length: 50 mm, 2x 8-position tool turret, Tool holder: Capto C5, Workpiece automation with drag conveyor system and gripper, Coolant system, Paper band filter, Oil separator, Manufacturer: Mahle, Type: LGA601, Oil mist extraction, Recooling unit, Manufacturer: Hydac, Chip conveyor, Manufacturer: Astos Iodpfx Amsx Ahivjysat +++ Note: This machine is part of an online surplus sale! +++

Condition: excellent (used), CTS Climate Test Chamber C-70/1000-S Device Data Manufacturer: CTS GmbH Model: C-70/1000-S Year of manufacture: 08/2011 Serial number: 113054 Type: Climate test chamber / Environmental simulation chamber Cooling: Water-cooled Description Used CTS climate test chamber for precise temperature and climate testing. Suitable for material, component, and reliability testing. Applications in industry, research, development, and quality assurance. Temperature and Climate Data Temperature range: -70 °C to +180 °C Temperature change rate: approx. 2.5 K/min heating Temperature change rate: approx. 2.5 K/min cooling Humidity range: 10% to 98% RH Dew point range I: +7 °C to +94 °C Dew point range II: -10 °C to +7 °C Electrical Data 400 V / 3/N / 50 Hz Power: 9.7 kW Current: 17.9 A Protection class: IP 22 Cooling System Refrigerants: R404A / R23 Pre-cooling stage: R404A, 2.3 kg Cooling stage: R23, 0.86 kg / 15 bar Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Isdpfx Aoy Iam Hemyoat Features CTS control unit with LCD display Programmable operation Digital setpoint/actual value display Viewing window in door Stainless steel test chamber Test specimen protection / temperature limiter Interior lighting Cable ports on the sides Feedthroughs approx. 50 mm and approx. 125 mm RS232 interface as per documentation Digital outputs for test specimen control Mobile design on castors Dimensions Test chamber volume: approx. 1000 liters External (W x D x H): approx. 2245 x 1270 x 1950 mm Installation size (W x D x H): approx. 2350 x 1290 x 2000 mm Weight Test chamber: approx. 1000 kg Recooler: approx. 120 kg Documentation Declaration of conformity Test certificates Operating manual Error messages and digital channels Site plan Quick guide Humidity diagram Scope of Delivery CTS Climate Test Chamber C-70/1000-S Documentation as available Scope of delivery as shown Optional Pre-delivery Service Function test Refrigerant service Leak test Test run with protocol Condition Used. Condition as per photos. Note Used equipment, sold without warranty. Inspection possible by appointment. Loading and transport can be organized on request. Subject to prior sale and technical changes. If you have any questions, please feel free to contact us.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 36,604 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, overall weight: 9,500 kg, number of axes: 4, This 4-axis AXA DBZ vertical machining centre was manufactured in 2010. It features an impressive X-axis travel of 2 x 750 mm for pendulum processing, Y-axis travel of 500 mm, and Z-axis travel of 600 mm. The machine includes a NC rotary table with hydraulic counter bearing and a plate-type tool changer. If you are looking to get high-quality machining capabilities, consider the AXA DBZ vertical machining centre we have for sale. Contact us for further details. • Spindle hours: 36,604 h (verified via image) • Machine ON hours: 81,189 h • Overall dimensions: 4500 × 2250 × 2700 mm • Voltage: 400 V • Frequency: 50 Hz • Total power requirement: 45 kVA • Full load current: 65 A • External fuse: 80 A • Tool changer: Plate-type tool changer • Design/configuration: Traveling column; Left/Right work areas (pendulum machining) Iodpfx Asy Edv Hsmyjat • Safety/enclosure: Maintenance door Additional equipment • NC rotary table RTA 200 with hydraulic counter bearing (4th axis) • Clamping system: Hydraulics for right/left work areas, incl. rotary union for 4th axis • Internal coolant supply (IKZ) • Chip conveyor • Emulsion (coolant) system • Recooling unit (chiller)

Condition: used, Year of construction: 2020, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2020 Control : Siemens 840 Dsl Turning diam. : 140 mm Turning length : 700 mm In General: Max. workpiece diameter:140 mm Chuck diameter:250 mm Max. turning length:700 mm Iodpfxsy A U I Ie Amyoat Track I: Tool carrier I:Tool turret (X/Z) Tool drive:9,600 rpm, 44 Nm Tool holder:BMT Number of stations:11 + 1 Part gripper X-axis:310 mm Z-axis:1,115 mm Position sensors (X/Z):Direct scales Track II: Main spindle (OP10):Travelling direct drive spindle Speed:5,000 rpm Power:33.9 kW Torque:231 Nm Chuck:Collet chuck Clamping cylinder:Hydraulic clamping cylinder Support control:Pneumatic W-axis:772 mm C-axis:0.01° Position sensor (W):Direct scale : Sub-spindle (OP20):Direct drive spindle Speed:5,000 rpm Power:33.9 kW Torque:231 Nm Chuck:2+2-jaw power chuck Clamping cylinder:Hydraulic clamping cylinder C-axis:0.01° Track III: Tool Carrier II:Tool turret (X/Y/Z) Tool drive:9,600 rpm, 44 Nm Tool holder:BMT Number of stations:11 + 1 Part gripper X-axis:310 mm Y-axis:50 mm mm) Z-axis:1,115 mm Position sensors (X/Z):Direct scales Track IV: Main spindle (OP30):Travelling motor spindle Speed:5,000 rpm Power:33.9 kW Torque:231 Nm Chuck:Collet chuck Clamping cylinder:Hydraulic clamping cylinder Support control:Pneumatic W-axis:988 mm C-axis:0.01° Position sensor (W):Direct scale : Tailstock:Fixed arrangement Quill:Hydraulic with position control Track V: Tool Carrier III:Milling/turning turret (X/Z) Tool drive:1,000 rpm, 240 Nm Tool holder:HSK-63 Number of stations:5 + 1 Part gripper X-axis:310 mm Z-axis:1,115 mm Position sensors (X/Z):Direct scales Automation: Feed conveyor:O-type, 18 base carriers Discharge conveyor:O-type, 18 base carriers Part transfer:3 grippers on tool turret Max. workpiece diameter:140 mm Max. workpiece height:630 mm Workpiece weight:max. 20 kg Equipment: Position measurement systems:Direct (glass scales) Chip removal:Chip conveyor Workpiece measurement:Renishaw OMP Coolant supply:Internal coolant with filter, 17 bar Coolant temperature control:Immersion recooler Emulsion mist separator:Mechanical Software option I:Turning/milling operation Software option II:Automatic retraction Software option II:Sister tool management

Condition: used, Year of construction: 2000, grinding diameter 300 mm grinding length 1200 mm workpiece turning speeds 6000 U/min max. workpiece weight 70 kg control FANUC peripheral speed 140 m/sec grinding wheel size CBN 400 x 5 mm Spindle power 24 kW weight of the machine ca. 11 t Quickpoint 5002/10 CNC external cylindrical grinding machine, built in 2000 - Regular maintenance carried out - Documentation available Special accessories: - Junker novotecnic cooling lubricant system - 2x LTA II R/H extraction systems - Hyfra recooler - 4 grinding wheel blanks Iaodpoy Dibxsfx Amyjt - Oil pan with grating *Disclaimer: All information is non-binding and may be incomplete or inaccurate. Subject to change without notice. No liability is accepted for the accuracy or completeness of the information provided. The disclosure or transfer of the data provided by us is not permitted without our express written consent. Translated with (free version)

Year of construction: 2020, condition: ready for operation (used), A complete Reisner refrigeration system including water tank, dry cooler and condenser is available. Version: split version, refrigerant: R513A, tank volume: approx. 3m³, cooling capacity: 170kW, medium: water, medium temperature inlet/outlet: 14°C/10°C, condenser recooling capacity: 230kW, dry cooler recooling capacity: approx. 170kW. Condenser dimensions X/Y/Z: approx. 4450mm/2250mm/1500mm, dry cooler dimensions X/Y/Z: approx. 7050mm/1600mm/1950mm. Documentation available. An on-site inspection is possible. Iajdpfxey Hvqls Amyet

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,936 h, travel distance X-axis: 715 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840 D SL, overall weight: 10,000 kg, spindle speed (max.): 10,000 rpm, tool weight: 8,000 g, number of axes: 5, This 5-axis SCHMID SE 371 horizontal machining centre was manufactured in 2019. It features a Siemens Sinumerik 840 D SL control system, a shuttle table, and a 30-position tool changer with HSK-A63 tool holders. Additional highlights include a chip conveyor by Knoll and a recooling system by Lahntechnik. A great opportunity to buy this SCHMID SE 371 horizontal machining centre. Contact us for further details regarding this horizontal machining centre. Additional equipment • Shuttle table • 2x NC rotary swivelling unit • Chip conveyor Knoll 600K-1/II 2019 • Filter system • Recooling system Lahntechnik KOF1803-100 2020 • Hydraulic unit • Switch and control cabinets • Rotary table rotation axes NC/hydr. clamping : 360 x n° degrees • Rotary table diameter : 284 mm, Machine Benefits Qualitative Machine Benefits • Digital inverter system • Space requirement incl. Operation : approx. 3. 5 x 5 m2 • The machine ran dry / without coolant. The machine has a profibus interface. Special schmid chucks are currently installed. Part-specific, hydraulic. Technical Machine Benefits • Swivelling range: -22/+95° • Traverse range x - y - z : 715 - 400 - 500 mm • Three-phase main drive : kw at s1 100% / s6 40% ed • Key performance data working spindle kw / s1 / s6 : 0. 5 • Spindle speeds approx. 1/min : 50 1,000 1,850 10,000 • Torque approx. Nm s1/s6 : 100/135 100/135 100/135 24/31 • Acceleration x - y - z : 4-6-9 m/sec2 • Tool change time : approx. 2. 5 sec. • Horizontal swivelling range nc/hydr. Clamping : - 22° / + 95° degrees • Centre distance of the rotary axes / chuck : 430 mm Extra Information Isdpjyyuv Hofx Amyjat Machine still under power

Condition: good (used), Year of construction: 2018, weight 582 kg operating pressure 16,0 bar capacity 36,0 l/min Iasdjx Urpgepfx Amyot viscosity VG10 voltage 400/50 V/50 control voltage 24 VDC Continuous flow recooling unit - Cooling capacity 9.0 kW at 40° ambient temperature - Permissible ambient temperature: +10°C to +40°C - Pressure loss: 0.5 bar - Refrigerant type: R134a - Refrigerant charge weight: 2.1 kg - Permissible operating pressure: 24 bar - Total electrical connection: 3.19/11.81 kW/A - Continuous sound pressure level: 75 dB

Condition: ready for operation (used), Year of construction: 2005, A 3-axis milling machine is offered. Travels X/Y/Z: 1016mm/610mm/760mm, tool changer: 24 positions, spindle: prepared for external cooling unit. Accessories: recooling unit Rehsler TAE evo M, Renishaw measuring system, inspection by appointment possible. Iaedpfey A Sl Rjx Amyot

Condition: used, Year of construction: 2017, functionality: fully functional, We are offering this used GÜNTNER Hermeticool-Hybrid HC-H 100 S-GFHE 080.5/A-N(S)-G4/2P air-cooled water recooler, year of manufacture 2017. Project number: 101048869 Device designation: S-GFHE 080.5/A-N(S)-G4/2P Device serial number: 404549442/19.02129 Year of manufacture: 2017 Ambient temperature min.: -30.0 °C Iaedpfsy Akgysx Amyjt Ambient temperature max.: +50.0 °C Volume: 116.2 l Permissible temperature (TS) min.: -50.0 °C Permissible temperature (TS) max.: +100.0 °C Test pressure: 11 bar Fan speed: 2,609 rpm Fan current: 22.4 A If you have any questions or require further information, please feel free to send us a message or give us a call.

Year of construction: 2020, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: 840D, overall weight: 15,000 kg, This PROFILATOR DV370-HL-05 was manufactured in 2020. A robust and reliable unit, it is ideal for those looking to enhance their machining operations. Consider the opportunity to buy this PROFILATOR DV370-HL-05. Contact us for more information. Additional equipment • Toothed Spindle 1: Tool clamping interface: HSK-C63/ Tool speed max: 4500 1/min /Screw tightening torque, expansion chuck: 20 Nm • Toothed Spindle 2: Tool clamping interface: UTS 50 /Tool speed max: 7000 1/min/ Screw tightening torque UTS clamp: 40 Nm Machine Benefits Technical Machine Benefits • Nc workpiece spindle 1: traverse path x1: 1760mm, z1: 385mm/ travel resolution on the cnc: 0. 001mm/ input speed of the axes max: 60 m/min • Nc workpiece spindle 2: traverse path x2: 2011mm, z2: 390mm /travel resolution on the cnc: 0. 001mm/input speed of axes max: 60 m/min • Nc workpiece counterholder: traverse path x3: 104mm, z3: 107mm /travel resolution on the cnc: 0. 001mm /input speed of the axes max: 60 m/min • Gear tower 1: traverse path y11: 195mm /travel resolution at the cnc: 0. 001mm /swivelling angle b1 max: 10° • Loading gantry: travel u5 axis: 1907mm /traverse path v5 axis: 271mm • Input speed (all applicable axes): max 60 m/min Iaodpfjynhu Djx Amyot • Rotation diameter max: 210mm/machining diameter max: 200mm/workpiece length max: 300mm/interface, workpiece clamping: kk6/workpiece speed max: 1100 1/min • Factory back spindle 1/2: speed max: 1000 1/min/gear spindle 1 and 2, shift slide y11, nc workpiece counterholder, slide x1/x2, slide z1/z2, a11 axle (charging unit), u5 & v5 axes (loading gantry):/speed max: 3000 1/min, 9000 1/min for gear spindle 2 • Loading gantry: 500kg/magnetic chip conveyor: 100kg/water recooler: 150kg

Condition: used, HYFRA VWK 270-EN cooling water recooler Ijdpfx Aoyn Sbnemyeat

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), type of input current: three-phase, type of cooling: air, overall weight: 6,400 kg, input voltage: 400 V, Equipment: compressor, type plate available, For sale are two high-performance industrial refrigeration units from GEA Grasso (ammonia / NH3). Video of the units in operation is available. These systems come from a professional application and are in excellent, well-maintained condition. Ideal for industrial refrigeration, food processing, logistics centers, or large-scale cooling requirements. Technical specifications: Manufacturer: GEA Refrigeration Germany GmbH Model: Grasso FX LP 800 Year of manufacture: 2012 Refrigerant: NH3 / R717 2 units available Including control cabinet Including heat exchanger Including oil cooler Including recooler Operational video available Permissible operating pressure: HP 28 bar / LP 16 bar Net weight: 6,400 kg per unit Features: ✔ Complete control cabinet ✔ Heat exchanger ✔ Oil cooler ✔ Recooler / outdoor units ✔ Multiple compressors (compound system) ✔ Industrial-grade design ✔ Nameplates attached Iodpjyxvwvofx Amyjat Condition: Units are currently still installed Very well-maintained condition Dismantling will take place within the next 3 months Availability: 2 identical units available Sale of individual units or both as a package possible “Loading can be arranged”