Used Recooler for sale (36)

Condition: ready for operation (used), A complete Boge compressor system with a capacity for 16 compressors with a central control system is available. 1) Boge SLF 271 screw compressor, capacity: 30.5m³/min, cooling air volume flow: 5000m³/h, drive motor: 200kW, weight: approx. 4700kg. 2) Boge S 271 screw compressor, capacity: 30.5m³/min, cooling air volume flow: 5000m³/h, drive motor: 200kW, weight: approx. 4500kg. 3) Boge S 180 screw compressor, capacity: 20.8m³/min, cooling air volume flow: 5000m³/h, drive motor: 132kW, weight: approx. 3200kg. 4) Microfilter Boge FFP 250. 5) Refrigeration compressed air dryer Boge DS 460, capacity: 46m³/min, max. operating pressure: 14bar, weight: approx. 500kg. 6) Refrigeration compressed air dryer Boge DS 260, capacity: 20.8m³/min, max. operating pressure: 14bar, weight: approx. 240kg. 7) Boge tank, volume: 5000l, max. tank pressure: 11bar, weight: 1200kg. 8) Condensate cleaning unit Boge CC35, tank capacity: approx. 86l, tank filling volume: 43l. 9) airtelligence Provis control unit with capacity measurement and OPS interface. 10) Cooling water recooling station, cooling capacity: 600kW, volume flow: 37.2m³/h, weight: approx. 1000kg. The entire system is operated with a central control system. Complete documentation available. On-site inspection is possible. Iedpfx Asuanrdeabotn

Condition: used, Year of construction: 2004, turning diameter 250 mm turning length 100 mm control SIEMENS 840 D total power requirement 35 kW weight of the machine ca. 7500 kg dimensions of the machine ca. m Ijdpfx Aaot Hxa Tsbstn E M A G (Germany) Vertical CNC Controlled Hard Turning and Grinding machine with tool turret and workpiece handling System Model VSC 250 DS Year 2004 # M7 28.69324 _____ Turning Ø, max. 250 mm Turning length internal / external 100 mm Workpiece length min./max. 29 – 100 mm 6-positon tool turret Ø / swing-Ø 480/790 mm Workpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mm Feed rate / Quick feed X/Z 45/30 m/min. Feed force X/Z 5,5/11 kN Spindle speed 4.300 / 6.000 rpm Spindle drive 28 kW Total electrical load, approx. 35 kW - 400 V - 50 Hz Weight, approx. 7,500 kg Accessories / Special Features: * CNC – Continuous Path Control SIEMENS Model 840 D, with colour monitor, graphics, menu-supervised dialogue programming, and all the usual options, cycles and subprograms, etc. * Hexagon Tool turret head with 6 tool positions (Ø 40 mm) without motorized tools posts, two positions T 3 u. T 6 equipped with grinding spindles with 42.000 rpm and with 18.000 rpm, using CBN discs resp. regular grinding tools * Workpiece handling device with WP transportation frames and circulation system and pick-up and unloading of finished parts directly through the motor spindle which is equipped with a hydraulic 3 jaws chuck make SMW Autobloc with membrane clamping and clamping control system. * MARPOSS MIDA Measuring Probe for measuring blank parts a. the finished parts * NORGREN air measuring system, hydraulic weight compensation of spindle, * Main elements of machine are temperature stabilized by a coolant system made by HYFRA * Recooler for the grinding coolant sitting on a large Coolant device consisting of SEITZ Paper Band filter and a mobile Chipconveyor, Magnetic separator, Centrallubrication, etc. Vertical CNC lathes offer a thermo-resistant construction (chips do not fall onto the machine bed),fast workpiece change times (pick-up system through the main spindle) and a ridged tool arrangement,which also allows unrelated machining work, like hard turning or grinding process on the same machine. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, overall weight: 390 kg, cooling capacity: 9.5 kW (12.92 HP), Coolling water recooler cooling capacity: 11,5 kW Itodpfewdvfqox Aabon weight: 390 Kg.

Condition: new, Year of construction: 2020, functionality: fully functional, total width: 7 mm, total length: 21 mm, workpiece weight (max.): 100 kg, Equipment: cooling unit, documentation/manual, Complete zinc drum system, two-row, footprint 21 x 7 m, assembled and in working condition. All components are new and unused (only a test run with water). 11 zinc bath stations, approx. 0.8 m³ each / wet converter / 19 stations. Rinsing, pre- and post-treatment / loading and unloading Manufacturer: Fey Galvanotechnik, Solingen / Built in 2020 (some individual components built in 2019) The system essentially consists of: ATB S7 controller in 12 Rittal cabinets, Simatic HMI Touch Tank park: 1 stainless steel tank (double electrolytic bath), 15 PP tanks (triple, double, and single tanks) Drain ball valves, level probes, temperature sensors Immersion bath heater: 20 double electrolytic baths, 16 single electrolytic baths, 12 zinc baths, 2 zinc electrolyte preparations, 9 (3 each) thick film, blue, yellow; Rotkappe T-QS 630/1.25-230Ws, 1250W Oil separator (degreasing): Friess W20 stainless steel 31x drum units: filling volumes up to 100 kg per drum, Progalvano, PE 1000, slotted perforation 25x two-piece lids (blue), 6 of which have finer perforations (gray); 6x fan-type drums (green) 32x drum rotator motors mounted on the tank wall: SEW-Eurodrive K49 DR2S80MS8/4, 0.22kW 4x stainless steel trolleys: Fey TWR, lifting capacity 300kg, 1x stainless steel wet transfer unit (4x drum rotator motors: KF49 DR2S80MS8/4, 0.22kW; 5x travel (frequency-controlled): SEW-Eurodrive K37 DRN90L4/BE2/TF, 1.5kW; 4x lift (frequency-controlled): SEW-Eurodrive KF47 DRN90L4/BE2/TF, 1.5kW) 4x positioning lasers: TR electronic GmbH, 2200-00102, max. 125m; stainless steel trolley guide rail; Steel portal 12x Rectifiers: Munk D400 G15/1200 WR-POX, oil-cooled, 15V 1200A Used Rectifier (Double E-Del): Driesch, 12V 1200A 3x Floor-standing centrifuges: Fey 243-B383-1, 150kg, 300 rpm, drum diameter 700mm, 2x 6kW heating elements, pneumatic. Lid opening; 3x additional drums; Centrifuge crane system: Demag 250kg Centrifuge basket cleaning system including crane Stier 250kg, 500W; Boom: Power Plus POWX910, 300 kg, 115 cm Isdov Ii Axepfx Aabotn 4x spray registers on the sink edge, on both sides, along the length; 4x pumps: Mefiag MSP0600-PP-CRS-VITON-PVDF, 750 W, max. flow rate 8 m³/h, max. height 10 m 3x stainless steel preparation and dosing tanks (zinc electrolyte, 2x E-Def), round, 1.75 m³ each, connected to the suction system; 3x pumps: Mefiag MSP0600-CRS-EPDM, 750 W, max. flow rate 8 m³/h, max. height 10 m 2x agitators 12x dosing pumps: Ecolab EcoAdd-ES-000510X, 11x ceramic inserts, 1x PTFE, 5.0 l/h Chamber filter press with piston diaphragm pump (zinc electrolyte cleaning): RuW Filtertechnik RW470/15 25x plate size 470 x 470 x 55 mm, external dimensions 230 x 100 x 110 cm, filter area 7 m², V-chamber 90 l, filtration pressure 15 bar, test pressure 700 bar, manual operation Recooling system RKP 300: Cooling tower: Lister KD 12-28-3 (water) 48 m³/h; Exhaustor: Walter 30kW, 3x Pump: Calpeda ESCC2900, 4kW, Q max. 78 m³/h, H max. 24 m 2x plate heat exchangers (Ti plates): Funke FP16-29-2-EH-0-10bar V: 4.9 l; 2x pump: Mefiag MSP 30- CRS-Tl, 3kW, Q max. 34 m³/h, H max. 25 m Exhaust: Scheidt BM3-800 NW 900, 32,000 m³/h; Scrubber: PP Scheidt WHZ-900, 32,000 m³/h, 99% filtration efficiency Loading device: Schwarz NH-2000 floor space, load capacity 2,000 kg 2x post-treatment tanks made of PE, round, 2.3 m³ each; storage rack for drum units, 12 spaces; walkways; approx. 150 m² black PE floor pan, 50 mm thick; PE pump sump, wastewater and inlet piping; 60x10 mm, 2 m long (2 boil-off stations were subsequ

Condition: good (used), Autotherm ATK 2000 cooling system 20.5 kW recooling system in 20-foot container Technical data Rated voltage: 3/PE AC 50Hz 400V (DIN IEC 38) Nominal output: 20.5 (31.5) kW Rated current: 50 (71) A Supply line fuse protection: 80A Mechanical data Dimensions: (W x L x H) 2430 x 6800 x 4350 mm Weight: 4800 kg Flow: Flange SDIN2633 DIN100 PN16 Return flow: Flange SDIN2633 DIN100 PN16 Overflow / drain: 2” female thread Inlet well water: 2” female thread Well water drain: 2” female thread Adiabatic inlet: 3/4” female thread Filling: manual 3/4” female thread Water circuit Heat transfer medium: Water/glycol ( 90% / 10% ) Flow pressure: max. 10.6 bar Tank volume: 4000 liters Free cooler circuit Pump type: Grundfos CR 45-1-1 A-F-A-E-EUUE Delivery pressure: ... 2.15 bar Flow rate: 58 m³/h Consumer circuit Pump type: (pressure booster system) Grundfos Hydro 2000 ME 2 CRE 32-6 A-F-A-E-EUUE Delivery pressure: max. 10.6 bar Flow rate: max. 40 m³/h Container 20-foot AIS-DSC-22-28 External dimensions mm (LxWxH) 6,058 x 2,438 x 2,591 Internal dimensions mm (LxWxH) 5,898 x 2,352 x 2,390 Internal floor area m2: 13.88 Control 2000 ME compact control unit Compact microprocessor control unit for infinitely variable control and cascade control of pumps with MGE motor with integrated frequency converter for demand-dependent, energy-optimized operation of multi-pump systems. With automatic activation and deactivation of the individual speed-controlled pumps by a digital controller adapted to centrifugal pumps. Grundfos R100 infrared manual control and diagnostic device for commissioning, data monitoring, reading out fault messages and configuring Grundfos pumps. Iodpfx Aaeuzhcusbjtn Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: used, Year of construction: 1998, Technical details: x-travel: 760 mm y-travel: 550 mm z-travel: 300 mm control: Röders RMS 6 Vers. 2.70 spindle taper ISO: HSK E40 Itsdpju Ndbpsfx Aabjn turning speed range: 42.000 stufenlos U/min spindle head swivable left - right: -52 ° / +5° (B-Achse) ° feed:: 0 - 30.000 mm/min Tool changer: 18-fach Werkzeuge + 2 places for Werkzeugvermessung Table dimensions: 860 x 550 mm table load capacity: 800 kp Number of working hours: siehe Foto h compressed air: 6,5 bar total power requirement: 20 kW weight approx.: 7000 kg dimension machine xH: 3,1 x 2,4 x 2,6 m dimension coolant device: ca. 0,6 x 0,8 x 0,7 m other features: Highspeed direct spindle digital axis drives AC servo motors ball screw spray cooling (microjet cooling jet and lubrication unit) working spindle Fischer MFW - 1230/42 up to 42.000 rpm tool measuring laser and probe system PS 25.00 Manual control unit Climatic cabinet Cooling water recooler Hyfra The machine can be demonstrated under power. *

Condition: used, Year of construction: 2012, An OPS-Ingersoll die-sinking EDM machine is available. Travel X/Y/Z: 525mm/400mm/450mm, C-axis: 360°, table dimensions X/Y: 750mm/650mm, max. workpiece weight: 1000kg, container dimensions X/Y/Z: 770mm/670mm/440mm, generator power (Eagle Powertec): 60A, electrode changer: 20-fold, high-speed jump: 18m/min, fine finishing generator: PT60, weight: approx. 5000kg, control: Eagle Powertec PC/NC 3060. 5000kg, control: Eagle Powertec PC/NC 3060, including compressor recooling unit, CO2 fire extinguishing system and pressure rinsing. Documentation available. On-site inspection is possible. Iedpswtrc Defx Aabjtn

Condition: ready for operation (used), Year of construction: 2023, Usable working area: 2000x3000mm, z-axis: 50mm, repeatability on the entire surface: ±0.05mm, X/Y/Z-addressable resolution: 0.001mm, max. acceleration: 15m/s², max. working speed in XY-axis: 2000mm/s, drives: X/Y-system with linear motors, Z-axis with servo motor. Laser protection class: Class 1, with cover, base body: stable, welded steel frame structure, axis system: X/ Y/ Z movement axes, drive: linear motor drive, contactless and low-wear, removal system: 2000mm extension, conveyor: Aluminum slats with servo motor drive, Pressure roller: for material, Laser source: CO2 laser 300W, closed and maintenance-free, Cooling: Closed cooling circuit with water recooler for laser, Cutting head: 5 inch, lens, cutting nozzle, cutting gas supply, Extraction: Extraction tray for small parts and dust, Software: CAM control software ICARO. Motorized brush width: 2000mm, SEI PC console: without computer, to be provided by the customer, Extraction unit: 2x extraction fans 5.5kW each, Scanner: Manual barcode scanner, Unwinding device: for material rolls with unwinding bar, Unwinding system: Connection available. The system was only installed and approved, series operation did not take place. On-site inspection is possible, documentation available. Itjdpfx Aswbuzfjabjn

Year of construction: 2005, condition: ready for operation (used), A Hyfra water recooler is available. Cooling capacity: 5.15kW, max. ambient temperature: 37°C, max. operating overpressure: 29.5bar, refrigerant: R 407c, refrigerant capacity: 2kg, machine dimensions X/Y/Z: approx. 900mm/800mm/1400mm, empty weight: approx. 180kg. Documentation available. On-site inspection is possible. Itedpowhfm Eofx Aabsn

Year of construction: 2008, condition: ready for operation (used), A refrigeration system including free cooler, drip tray with substructure, piping, connection lines and control system is available. 1) Eurocooler refrigeration system: Refrigerant: R407C, cooling capacity: 235kW, water circulation rate: 38m³/h, glycol content: 35%, compressor capacity: 80kW, fan capacity: 33280m³/h, condenser surface area: 10.89m². Machine dimensions X/Y/Z: approx. 2200mm/4600mm/2100mm, empty weight: approx. 3150kg. 2) Dry cooler (free cooler) GQ2590.BX, recooling capacity: 233kW, volume flow: 34.9m³/h, air volume: 129000m³/h, surface area: 1844m². Machine dimensions X/Y/Z: approx. 9300mm/2400mm/1600mm, empty weight: approx. 1750kg, working hours: over 70000h. The changeover valve of the compressor of the free cooler is defective. Documentation available. On-site inspection is possible. Itedpfxjv Ip Tdj Aabjn

Year of construction: 2018, condition: ready for operation (used), A gear flank grinding machine Reishauer, completely overhauled by Burri Werkzeugmaschinen, is available. Grinding spindle speed: 3500rpm, cutting speed: 63m/s, max. gear diameter: 360mm, module range: 0.1-7, number of teeth: 6-600, max. workpiece height: 160mm, max. helix angle: +/-45°, max. workpiece weight: approx. 60kg. Min. wheel root circle diameter: 250mm, grinding wheel dimensions X/Y/Z: 350mm/104mm/160mm, grinding worm diameter range: 270mm-350mm, max. grinding width: 175mm, max. workpiece speed: 800rpm. Includes profiling devices, balancing device, structure-borne noise contact control, compact filter system, cooling unit, cooling water recooler, robot automation, and transport trolleys. Documentation available. An on-site inspection is possible. Isdpfxsw Rqwae Aabotn