Used Recycling Machine for sale (84,913)

Condition: used, Year of construction: 2005, XYZ Proturn VL425 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK VL Control (Reconditioned 2025) Max’ Distance Between Centres 1250mm Max Swing over Bed 400mm Max’ Swing over Gap 700mm Spindle Bore 80mm Spindle Speeds 25 – 2500 rev/min Spindle Motor 10hp / 7.5Kw Quick Change Tool Post Tailstock MT5 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2005 We can offer delivery & installation, operater training and warranties. Supplied with: 3 Jaw Chuck Cedext Ibyepfx Addsaa Tooling as photographed Machine Handbooks 3 Toolholders (More available if required). Tracking Coolant Worklight Auto Lubrication *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78938 Machine Serial Number: L247 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), operating hours: 2,658 h, functionality: fully functional, pressing force: 71 t, filling opening width: 1,000 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, input current: 200 A, oil tank capacity: 1,250 l, empty load weight: 29,000 kg, Technical data baler: Manufacturer BOA Recycling Systems B.V. Type M75-45-A-5-1.6 Ecoline Year of construction 2021 Hours of operation 2,658 hours (as of May 2024) Number of pressed bales 42,212 pieces (as of May 2024) Press power main press 71,2 kN (71 t) Specific press capacity 9 kg/cm² Operating pressure 280 bar Cylinder stroke 2,200 mm Feed channel 1,620 x 1,000 mm Capacity per cycle time 2,4 m³ Theoretic cycle time 21 seconds Theoretic throughput rate 450 m³/hour Bale size 1,100 x 720 mm, length variably adjustable up to 1,400 mm Driving motor 45 kW Connected load 100 kW Current consumption 200 A Tying system 5-fold vertical, fully automatic, the press stamp is prepared for an additional 3-fold horizontal binding Throughput rate at a bulk weight of 30 kg/cbm approx. 13,6 tons/hour bulk weight of 50 kg/cbm approx. 24,2 tons/hour bulk weight of 100 kg/cbm approx. 36,4 tons/hour bulk weight of 150 kg/cbm approx. 54,7 tons/hour Bale weight up to 600 kg, depends on material Volume hydraulic oil tank 1,250 l SPS controller Siemens S7 1500 Cedpeu Thcvefx Addoaa Operating panel Siemens SIMATIC HMI TOUCH Transport dimensions of press 10,000 x 2,800 x 3,385 mm (l x w x h) Press height set up with feed chute 4,743 mm Press height with conveyor belt 7,123 mm Machine weight baler approx. 29 tons Noise level <85 dB (A) Condition of the baler: With 2,658 operating hours, the press is almost as good as new and in very good condition, has hardly any signs of wear and is ready for immediate use. Due to larger material input quantities, the pressing force and throughput of the machine no longer meet the customer's current requirements and is therefore being replaced by a new 120 tonne baler. Only the baler is for sale, without conveyor belt and wire drawing stations. Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Sharpening machine for circular saws/rip saws IDL000829 Caodpfx Aevlczveddoa - manufacturer: IMW

Condition: used, Year of construction: 2018, Used Filling Monoblock for beer 800 bph Monoblock Structure The Used Filling Monoblock for beer 800 bph consists of three separate units: an automatic rinser, an isobaric filler with a double vacuum system, and a crown capper. This configuration optimizes the management of rinsing, filling, and sealing phases. As a result, the system ensures suitability for processing beer in 0.5-liter glass bottles. Moreover, this modular layout facilitates maintenance and replacement, therefore increasing operational reliability. Rotary Rinser ZPC-12 Caedjw Tlz Eepfx Addea The rinser in the Used Filling Monoblock for beer 800 bph operates with a continuous rotation system and uses 12 gripping clamps. First, the operating cycle handles bottle entry. Then, it performs internal rinsing with treated water, followed by dripping and final exit. The machine handles glass bottles with a height between 150 and 330 mm and a diameter between 50 and 90 mm. It processes 600 to 800 bottles per hour. The installed motor delivers 1.5 kW of power. Additionally, the design allows rapid changeovers between bottle formats, which enhances production flexibility. Isobaric Filling with Double Vacuum The BFP-12 filling unit, at the heart of the Used Filling Monoblock for beer 800 bph, includes 12 filling valves and applies an isobaric process with double vacuum. Specifically, the system performs two evacuation cycles and CO₂ reinjections before the filling stage. Consequently, it significantly reduces residual oxygen and preserves beer quality. It supports bottle volumes from 250 to 1000 ml. Furthermore, the unit integrates key components such as a Southern Pump, a Mitsubishi PLC, a THINEDA touchscreen, Korean-made sensors, and AUTONICS pneumatic systems. This machine also operates with a 1.5 kW motor. In terms of control, the electrical interface provides real-time adjustments, thus improving accuracy during production. Crown Capping Machine ZDS-3 The crown capper of the Used Filling Monoblock for beer 800 bph applies metal crown caps to glass beer bottles. The machine includes 3 capping heads and operates with a continuous rotary motion. It handles bottles up to 330 mm in height and caps with diameters from 20 to 30 mm (cP size), compatible with the normal European neck type. Notably, the capper reaches up to 1500 bottles per hour, thereby providing an operational buffer that prevents bottlenecks downstream of the filler. In comparison to standard cappers, this model delivers greater precision and cap stability. In addition, its robust frame reduces vibration during high-speed operation. Electrical Characteristics and Compatibility The machines in the Used Filling Monoblock for beer 800 bph use reliable and industry-standard electrical components. The full line features an estimated total power consumption of approximately 4.5 kW. From an integration standpoint, this makes the system suitable for facilities with medium energy capacity. The system exclusively handles 0.5-liter glass beer bottles. During operation, it performs filling under controlled pressure to preserve CO₂ levels and ensure the product’s final stability. Overall, the system delivers consistent performance, reduced oxygen pickup, and excellent packaging quality. Lastly, the compact footprint simplifies installation even in limited space environments.

Year of construction: 2025, condition: new, DOLFİN- VDL series Drum (Spiral) parts washing machines are used particularly for the purpose of cleaning small parts that are manufactured in large quantities and in bulk. The materials that are poured from the inlet part of the spiral drum in the device are directed towards the outlet part of the drum with the spirals inside the drum. While the drum moves in its own axis according to the set rotation speed, it subjects its parts to, respectively, washing (degreasing), rinsing, passivation and drying processes (varies per the model). Since these processes are sequential and continuous, all processes are completed quickly and effectively within a single device. Full penetration is ensured by pressurized spraying and dipping effects in each section. It is a very functional model of us that is used particularly for washing the bolts, nuts, washers, or such small parts, fittings, nipples, couplers and fittings that are processed in CNC and automated machines in high quantities. Cjdpfxev S Dk Ss Addoaa Regardless of the metal type of the parts to be washed, they are fully compatible with steel, brass, aluminum copper or stainless steel materials. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device operates continuously in accordance with the values of the washing parameters that have been entered from the control panel before operation. Parts that come out of production in bulk can be loaded into our device in 3 different manners. 1. With Vibrating Loading Chamber, 2.With Lift Conveyor, 3. By coupling to our Customer's existing system, Do not hesitate to contact for more information. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Condition: good (used), Rigid Box Corner Pasting Machine GC-40 A brand new device. The machine glues cardboard corners with paper tape or foil. Technical data: Tape length 5-35mm Hoof depth 10-300mm Tape width 19mm Efficiency 20-40 cycles/min Codpfx Ajwfrateddjaa Weight 230kg Power supply 230V

Condition: excellent (used), functionality: fully functional, machine/vehicle number: G01747, Turning diameter over bed : 500 mm Turning diameter over slide : 280 mm Workpiece length : 2000 mm X-axis travel range : 280 mm Z axis travel range : 1935 mm Rotation speed : 3000 rpm/min Spindle tip : A2-8 Spindle flight : 82mm X / Z accelerated feed : 4/6 m/min Tailstock sleeve diameter : 75 mm Tailstock taper : MT5 Main spindle motor : 11/15 kW Tool shank size : 25x25 mm Cjdpfx Adovfdiujdeaa Tailstock step : 150 mm Positioning accuracy of the X/Z axis (C, Y) : 0,018/0,021 mm Repeatability accuracy of the X/Z axis (C, Y) : 0,014 mm Weight : 2800 kg

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, input current: 238 A, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Caedpfsvf E Avex Addja Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: new, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, 📝 Description & Additional Technical Parameters Product Description: The VTX-5 is part of the Tongtai VTX Series of compact CNC vertical tapping / milling centers. It is designed to combine high speed, rigidity, and precision in a relatively small footprint. It uses a direct-drive spindle to improve tapping accuracy and reduce maintenance compared to belt-driven designs. Roller guideways (linear rails) are used to ensure smooth, rigid motion. Tool changing is relatively fast, and the structure is optimized for stability and precision under moderate loads. Technical Parameters: Casdpfxoxni Iqs Addea Table size: 600x400mm Strokes on X/Y/Z: 510/400/300mm Maxim loading capacity on the table: 250kgs Rapid traverse on X/Y/Z: 60/60/60 m/min Machine size (Width x Depth x Height): 1.700x2.600x2.700mm Machine weight: 2.850kgs Siemens controller model 828D with Shopmill and 10,4inch LCD Spindle speed 12.000 rpm direct driven Spindle motor 5,8kW Tool shank BBT-30 4th axis rotary table diameter 170mm and tailstock CTS ( coolant through spindle) 20bar Chip Conveyor chain type

Condition: excellent (used), Year of construction: 2017, XYZ 1340 Trainer Lathe 2 Axis Digital Readout Max. Distance Between Centres 1000mm Max. Swing over Bed 330mm Max. Swing over Gap 495mm Spindle Bore 35mm Spindle Speeds 53 – 2000 rev/min Spindle Motor 3hp Cajdsxqq H Topfx Addoa Quick Change Tool Post Tailstock MT3 Tailstock Dia’ 40mm Tailstock Travel 110mm Manufactured | 2017 415V Electrics Supplied with: Tool Holders as Pictured Change Gears FOR SALE WITH JET MACHINERY LTD Jet Machinery Stock No: #78011 Machine Serial Number: TBC Cost: £3,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2025, condition: new, DOLFIN-kbn2 series parts washing machines are used for the purpose of washing the parts, which are also larger in size and heavy, requiring rinsing, passivation or another process, particularly after washing. While it is desired to have no oil and other contaminants on the surface before assembly or packaging at the businesses and factories manufacturing parts in masses, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part according to the utilization areas of the part. For this requirement, rinsing or a similar implementation in 2nd step is compulsory. Our KBN 2 series parts washing devices are special devices that contain more than one tank and/or bath. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. After the washing process and following the direction of the washing chemical to its own tank, the rinsing operation starts in the 2nd tank. If desired, the 3rd tank can be added and another function is added after rinsing. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. Codpjv S Dihefx Addoaa The device automatically completes the loop in accordance with the values of the washing parameters that have been entered from the control panel before operation. All processes are carried out with specially prepared programs along with PLC. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Condition: good (used), Thermographic machine Adana Mo. 318 for relief printing Working width 32 cm. Very good condition, machine ready for operation. Cedjwundaopfx Addoaa Description: Easy-to-use handheld machine: the material for thermography is sprinkled with powder. The material is then placed on a conveyor that passes under the oven to achieve the desired thermographic effect. The conveyor speed is infinitely variable and can be precisely set using a potentiometer. The heating unit can be raised or lowered or even moved forward, depending on the requirements of thermography. The adjustable conveyor speed allows thermography at different speeds and with temperature control. Power supply 220 V single-phase

Condition: new, Year of construction: 2025, workpiece weight (max.): 12,000 kg, turntable diameter: 280 mm, overall weight: 120 kg, The Robotmover 20 is the ultimate solution for moving heavy loads such as industrial machinery, installations, or steel structures – 100% electric, so zero emissions and noise pollution. Work with unparalleled flexibility thanks to the wireless remote control and the ability to effortlessly change direction 360°. This compact electric mover excels at maneuvering through tight spaces, making it an indispensable tool in congested or confined environments. Thanks to the 48V-60Ah battery, the Robotmover ensures long-lasting operation, saving both time and labor. Whether you're moving equipment or heavy loads, this electric Robotmover is your reliable partner that streamlines your work and increases productivity. Flexible Operation: The wireless remote control provides infinitely variable drive with 360° direction changes. Strong Traction: The two powerful 1000W motors equipped with magnetic brakes produce a robust pulling force of 20 tons. Cajdpfew I Rt Nsx Addea High Load Capacity: The triple-bearing turntable effortlessly carries a maximum load of 12 tons. Long Battery Life: The 48V lithium-ion battery with a 60 Ah capacity provides 4-5 hours of use without frequent charging. Scope of supply: Robotmover 20, remote control, battery chargers Also available transport crate with garage, battery operated hydraulic jacks, fixed following rollers electric skates power skates machine mover robot mover jung lifting equipment hydraulic jacks

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Technical data on the EPS (Polystyrene) press: Manufacturer FZ-Recycling GmbH & Co. KG, Germany Type FZR 320 Year of construction 12/2022 Drive power shredder 4 kW Drive power of compactor screw 7.5 kW Drive power hydraulic unit for the holding clamp in the press channel 1.1 kW Total connected load 12.6 kW Current consumption 32 A Compaction ratio of the compacted blocks to the original product approx. 50:1 (depending on material) Block weight after compaction approx. 300kg/m³ (depending on material) Block dimensions 320 x 320 mm, variable length Throughput approx. 100 kg/hour, depending on material Achievable density approx. 250 - 300 kg/m³ The pressed blocks are stacked approx. 1400 mm high on pallets and stretch-wrapped. Machine dimensions approx. 4,600 x 1,400 x 1,980 mm (l x w x h) Transport weight press 1,325 kg Condition of the baler: The press was only used sporadically, is in very good condition and available at short notice. Due to the low weight of the machine and the forklift shoes in the transport frame, the press is mobile and can be used directly on the construction site where the material is produced. The electrical connection is made via a CEE 32 A plug. Scope of delivery for the baler: Cjdpfeu Thkaex Addjaa 1 piece EPS press, ready for connection and use Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, functionality: fully functional, feed length X-axis: 510 mm, feed length Y-axis: 510 mm, feed length Z-axis: 510 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, 📄 Product Description The Tongtai SH-4000P is a high-speed, high-rigidity horizontal machining center designed for efficient machining of aluminum and light metal workpieces. It features a compact structure, three-point support bed, high rapid traverse speed, and optional APC (Automatic Pallet Changer). The built-in spindle provides high speed and precision, ideal for automotive and general manufacturing industries. ⚙️ Technical Parameters Strokes on X/Y/Z: 510/510/510mm B axis rotary table: 0,001º indexing table Rapid traverse on X/Y/Z: 60/60/60 m/min Pallet size: 2 x (400x400mm) Maximum load on the table (pallet): 2 x 400kgs Maximum workpiece dimension (diameter x height): Ø 550 x H 800mm Spindle speed: 15.000 rpm Built in spindle motor: 18.5/26/37 kW Machine size (Width x Depth x Height): 1.750x5.060x2.720mm Machine weight: 8.700kgs Fanuc controller model 0i-MF with Manual guide i and 10,4''LCD monitor Codpsxnizdjfx Addsaa Tool shank: BBT-40 ATC with 60 tools CTS ( coolant through spindle): 70bar Chip Conveyor integrated type with trolley Oil Skimmer

Year of construction: 2025, condition: new, Zig Zag Air Sifter Sizes/ wides from 200mm - 1800mm Precondition for the separation are differences in the material like: - Different sizes of particles - Differences of the density - Differences in the surface condition of the particle - Differences in the form of the particle - Grain size 0.1mm - 40mm, (bigger particles are possible with a special design) We are the manufacturers of these plants and we build Zig Zag Sifter Plants in different sizes see attachment. In order to make you a definite offer we need to know some points: 1. What material you want to separate? Csdochb Ruepfx Addoaa 2. Grain-size of the material? 3. Bulk weight kg/liter of your material. 4. We have technical center at our house, where we can test your material.

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. Caodpfsv Sa I Tex Addsa In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

Condition: excellent (used), Eyeletting machine for advertising banners The device is in perfect condition, ready for work. Technical data: 1 head laser indicator Caodpfsw Ed U Asx Addoa Foot pedal operated

Condition: new, Year of construction: 2025, total height: 2,100 mm, total length: 8,500 mm, total width: 1,400 mm, overall weight: 1,850 kg, working height: 900 mm, The machine is engineered to handle the connection nuts of solar panel frames, executing drilling, tapping, and cutting operations concurrently within a singular unit. Thanks to the simultaneous processing of four profiles, it allows for the production of one nut every 1.5 seconds. Caedpfevvkvpox Addja Please contact us for detailed informations.

Condition: excellent (used), Year of construction: 2004, operating hours: 34,480 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 19,000 kg, transport height: 3,300 mm, oil tank capacity: 750 l, power: 45 kW (61.18 HP), Technical data baler: Manufacturer Bollegraaf Typ HBK 100 Year of construction 2004 Hours of operation 34,480 hours Press power main press 100 tons Press power of pre-press max. 42 tons Feed channel 1,600 x 1,100 mm Filling volume 3.15 m³ Theoretic cycle time 22 sec. Theoretic throughput capacity up to 450 m³/hour Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical, fully automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 13 tons/hour bulk weight of 50 kg/cbm approx. 20 tons/hour bulk weight of 100 kg/cbm approx. 30 tons/hour Throughput rate with ruffler approx. 20 tons/hour Bale weight 550 up to 750 kg, depends on material Volume hydraulic oil tank 750 l SPS controller Telemecanique TSX Micro Codpfoxbgnhox Addeaa Transport dimensions only baler 10,900 x 2,320 x 3,300 mm (l x w x h) Machine weight baler approx. 19 tons Comments: Unlike the standard HBC press series from Bollegraaf, this machine does not have a pre-press flap but cuts the material between blades on the press ram and the counter blade in the frame. This makes it a cutting edge press, similar to a Paal, unoTech, etc. The press is in very good condition for its age, as it was used exclusively for compressing paper from document destruction. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2017, operating hours: 25 h, functionality: fully functional, saw band length: 520 mm, saw band width: 580 mm, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, type of input current: three-phase, overall weight: 2,500 kg, input voltage: 380 V, New machine. Cedpfx Adjunia Hedsaa

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, The machine is designed for mixing various mixtures, whether solid or liquid, in large containers, with the designated space for the containers measuring 1200x1050x790 mm. Once the container is placed into the designated area, the machine begins to rotate, performing the mixing process. The mixing time can be electronically adjusted. Technical Data: Speed – variable, controlled by frequency converter 220V-380V / 3.7 kW Power consumption – 1500 W Supply voltage – 1x220V / 50Hz Motor protection – IP 54 Machine weight – 1000 kg Caodpfxow N I Uye Addea Container space dimensions – 1200x1050x790 mm Working chamber dimensions – 1870x1860 mm Total height – 1980 mm

Condition: as good as new (ex-display), functionality: fully functional, Table size 540 x 250 mm Max table travel 560 x 260 mm Max distance from table to spindle center 450 mm Cajdpfx Adou Hzg Rsdoa Table slide-way Double-V rail Feed of cross handwheel, per revolution 5 mm Feed of cross handwheel, pe graduation 0,02 mm Feed of vertical handwheel per revolution 1,25 mm Feed of vertical handwheel per graduation 0,01 mm Wheel speed (50 Hz) 2850 rpm Wheel speed (60 Hz) 3440 rpm Wheel size 200x31,75x20 mm Power of spindle motor 1500 W Hydraulic station motor 1500 W Working pressure 3 Mpa Max runoff 18 L/min Fuel tank capacity 80 L Coolant pump 40 W Machine's net weight 900 kg Size 1,80x1,40x1,80 m Robust and reliable construction. Zero working hours Price should remain the same till end of December.

Condition: good (used), Banding machine TP-601 D1 The machine is operational, ready for production. Producer: M.J Maillis Sander Simple controls. An indispensable device on expeditions, for packing heavy parcels, e.g. with leaflets or catalogues. A strip of PP tape strengthens the packaging and additionally creates a handle that allows us to easily grab and transport the package. Adjustable tension force. Goal size 850x600mm Strap width 10mm Cedpew D E Riofx Addsaa Power supply 230V Weight 200kg

Condition: like new (used), Mini Pak’r Air Cushion Machine The machine creates air-inflated fillings from the foil sleeve. Csdow D E N Eepfx Addsaa 230V power supply Weight about 6 kg.