Used Reel Splitter for sale (880)

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaning unit, high-pressure flushing unit, high-pressure cleaner with vacuum unit on hot-dip galvanized and painted high-quality steel frame with forklift slots. The following models are available:  Vortex Combi 400 or 1000 Sewer Whale - 55 l/min, 160 bar HD pump - 1260 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank  Vortex Combi 400 or 1000 Sewer Salmon - 60 l/min, 200 bar HD pump - 3600 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank HIGH-PRESSURE HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 50-80 m ½" high-pressure hose  Hose: 50-80 m ½" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 35 m ¾" low-pressure hose  Hose: 35 m ¾" low-pressure hose (included) Nsdpfx Aiefdkb Ee Nelf FUEL TANK:  Capacity: approx. 13 l WATER FILTER:  With washable cartridge and drain valve  Filtration grade: 50 Mesh INCLUDED IN DELIVERY:  Multifunction radio remote control IMET; - On/Off motor; - On/Off bypass; - Electric speed control +/-; - Emergency stop button;  Battery charger for radio remote control;  400 or 500 l water tank made of polyethylene; ACCESSORIES AVAILABLE ON REQUEST:  STORZ kit for connection to the water hydrant;  UNI 45 kit;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint, and quick coupling;  High-pressure lance kit with flat jet nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispenser kit;  Stair cleaning unit;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories on request Other available models: VORTEX COMBI 400 Whale E = Fully electric  Vortex Combi 800 Cleaning D Cold water - 800 l sludge tank - 2750 l/min suction capacity - Diesel engines: Yanmar - 15 l/min at 150 bar - HD reel with 20m hose - Radio remote control on request

Condition: good (used), Power cable, data cable, -Manufacturer: Lapp Kabel, connection cable on cable reel 78 m -Cable reel: Schill IT -Cable: Rubber cable type H07 RN-F 3G1.5 -Cable cross-section: 1.5 mm² 3-pole -Connector plug: see photos Nlsdpjivumpsfx Ai Nsf -Dimensions: 410/260/H450 mm -Weight: 15 kg

Condition: used, wire electrode, welding wire, welding wire Nlodoimd S Aepfx Ai Nof -Gas wire electrode: roll started -Type: 308L Ø 0.8 mm -Dimension: Ø 300/100 mm -Weight reel: 9.3 kg

Condition: new, Year of construction: 2026, functionality: fully functional, conveyor belt width: 605 mm, warranty duration: 24 months, total width: 2,900 mm, total length: 1,072 mm, total height: 1,330 mm, input voltage: 400 V, table length: 2,420 mm, empty load weight: 160 kg, opening width: 30 mm, working width: 605 mm, roller length: 633 mm, space requirement height: 1,900 mm, space requirement length: 1,072 mm, space requirement width: 1,240 mm, New machine Advantages: + Premium quality from Switzerland with a 2-year warranty + with stainless steel tables + easy to move, with swivel casters and locking feet for stable support + operation with push buttons + suitable for all types of dough for rolling and shaping + tables can be folded up on the left and right + scrapers can be easily removed without tools + machine is equipped with 1 hand reel as standard + with dough collection trays on both sides + fast spare parts supply within 1-2 working days Technical data: - max. dough piece weight: 10 kg - belt width: 605 mm Nsdpfx Aijivdkvj Nelf - roller width: 633 mm - table length: 2,420 mm - roller adjustment: from 0.5 mm to 30 mm (product-dependent) - speed: approx. 50 cm/sec - motor power: 1 kW - connection values: 400 V - 3-phase - 50 Hz - fuse: 16A-CEE plug - dimensions: --- working position: 2900 x 1072 x 1330 mm (W x D x H) --- rest position: 1240 x 1072 x 1900 mm (W x D x H) - net weight: 160 kg Optionally available at an extra charge: - Machine equipped with original RONDO plastic belts + €619.00 net The conversion may extend the delivery time!

Condition: new, Year of construction: 2026, functionality: fully functional, conveyor belt width: 635 mm, warranty duration: 24 months, total width: 3,700 mm, total length: 1,235 mm, total height: 1,250 mm, input voltage: 400 V, table length: 3,320 mm, empty load weight: 280 kg, opening width: 45 mm, working width: 635 mm, roller length: 660 mm, space requirement height: 2,170 mm, space requirement length: 1,235 mm, space requirement width: 2,150 mm, New machine – Rondostar 4000 ECO Successor model to the SFE 6607 Advantages: + Premium quality from Switzerland with a 2-year warranty + Machine with a complete stainless steel housing + With automatic flour spreader + With automatic roller adjustment + With integrated electric motor + High-quality synthetic belts, easy to clean + Easy to move, with swivel casters and locking feet for stable support + Operation with a touch panel + Computer control (100 programs) and manual operation via push buttons possible + Tables can be folded up on the left and right + Scrapers can be easily removed without tools + Machine is standardly equipped with 1 hand reel + Hand reel supports on the left and right + With dough collection trays on both sides + Fast spare parts supply within 1-2 working days Optionally available at an additional cost: - Automatic reels Dough belt is automatically reeled up with minimal tension. + €3,150.00 net Technical data: - Dough piece weight: max. 15 kg (product-dependent) - Belt width: 635 mm Nodpoivdl Esfx Ai Njlf - Roller width: 660 mm - Safety guard opening: 90 mm - Table length: 3,320 mm - Roller adjustment: from 0.2 mm to 45 mm (product-dependent) - Speed: approx. 85 cm/sec - Motor power: 1.1 kW / 2 kVA - Connection values: 400 V - 3Ph - 50/60Hz - Fuse: 16A-CEE plug - Dimensions: --- Working position: 3700 x 1235 x 1250 mm (W x D x H) --- Rest position: 2150 x 1235 x 2170 mm (W x D x H) - Net weight: 280 kg

Condition: used, Drahtabspülvorrichtung - Unreeling Devices Müller Martini14 pieces Online-Video-Inspection by Skype-Video Nedpfx Aeh Ax D Dsi Nelf We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,8 / 3 Panels thickness (min/max) mm 10 / 50 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 1 x 75.186 (1 x Kw 4,5) + 2 x 08.378 (2 x Kw 4,5) adj. by N.C. Glueing Unit (Thermofusion with Laser) IMA Laser System LASERLINE (year 2025) Band Pressure zone + Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) 08.42/30/B (Kw 0,66 x 2) work speed 20 + 30 m/min (0°-25°) Spraying Unit (for anti-release liquid) Nsdpjy Spcljfx Ai Nolf Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustable for 4 profiles) 08.0587 HS/LS1 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Milling grooving unit, N.C. adjustable Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) RIEPE (for PMMA too) OPTION:No. 1 Automatic Return System "GELDMEIER" (Sofit's Code O11043)

Condition: used, Year of construction: 2022, OVERVIEW his TecnoBodega Ingeniería / TB Ingeniería C1EL self-adhesive labelling and capsule machine, manufactured in 2022, is designed for the application of front labels, back labels, tax stamps and capsules on bottles. The machine is suitable for compact bottling lines in wine, spirits, liqueur and beverage production. The machine is equipped with 3 labelling heads and can process bottle formats with a height range from 140 to 370 mm and a diameter range from 50 to 100 mm. It works with paper self-adhesive labels and supports label sizes from 40 to 105 mm in length and 18 to 150 mm in height. Nsdpfjzdya Nex Ai Nolf The system includes a bottle transport conveyor, infeed timing screw, independent self-adhesive labelling heads, capsule distributor and capsule application unit. It also features automatic speed regulation according to bottle flow and integrated machine safety systems. The machine is built in stainless steel with transparent safety guarding and is operated via a Weintek HMI terminal. The observed configuration includes label reel support discs, internal label dispensing heads, bottle guiding elements, timing screw and conveyor system. TECHNICAL DATA - Manufacturer: TB Ingeniería / TecnoBodega Ingeniería - Model: C1EL - Machine Type: Self-adhesive labelling and capsule machine - Year of Manufacture: 2022 - Number of Labelling Heads: 3 - Labelling Formats: Front label, back label and tax stamp - Label Type: Paper self-adhesive labels - Production Capacity: approx. 1,000 – 1,500 bottles/hour - Capacity for Shrink Capsules: up to approx. 2,000 bottles/hour on Bordeaux bottles Ø76 mm - Bottle Height Range: 140 – 370 mm - Bottle Diameter Range: 50 – 100 mm - Core / Mandrel Diameter: min. 76 mm - Maximum Reel Diameter: 250 mm - Label Length Range: 40 – 105 mm - Label Height Range: 18 – 150 mm - Control Interface: Weintek HMI terminal - Included Components: Bottle conveyor, infeed timing screw, self-adhesive labelling heads with independent feed, capsule distributor, capsule application unit - Included Features: Automatic speed regulation according to bottle flow, machine protection and safety systems, compact line integration - Construction: Stainless steel frame with transparent safety doors - Safety: Emergency stop, safety guarding and warning labels - Condition: Used, installed in production environment

Condition: used, Year of construction: 1996, Manufacturer : Marchesini Model: MS 235 / AS 237 / BA 50 Year : 1996 Type : 4-seal pouch packaging line for powders. 1. Bagging machine Nodpfozg I Ugex Ai Nolf Vertical automatic machine with intermittent movement for filling and sealing bags, for medium and high speed production lines, for powders. Volumetric shaving filler Mechanical speed: 100 strokes/min Range of formats : max reel outer diameter: 400 mm (800 mm with reel) max reel width: 800 mm (820 mm with waste) bag length: 60 to 120 mm Reel support trolley Hopper handling trolley Weight: 2100 kg 2. sachet counting unit 3. Cartoning machine Capacity : 70 cartons / minute Dimension A = 40 - 145 mm Size B = 20 - 80 mm Size H = 70 - 190 mm A+B = 190 mm Weight: 900 kg

Condition: good (used), . Technical data . Nledozg Tfkjpfx Ai Njf Pressing force 30 t Stroke 100 - 600 mm Ram stroke, adjustable 8 - 40 mm Installation height 200 mm . Various reels in stock up to 300 kg . . Ongoing purchase of used German machines without NV or CNC control

Condition: new, Hydraulic winch for log splitters, cranes, mini excavators, tractors, agricultural vehicles, vineyards, horticulture, and many other applications. The hydraulic attachment winch simplifies many tasks. - Pull and position firewood for the log splitter - Pull logs onto trailers - Pull out tree stumps and trees - As an attachment winch for forestry cranes and small excavators - As a winch for small tractors and narrow-gauge tractors A robust steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, offering many possibilities for attaching the winch (the threads are cut and painted; they must be recut with a tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is installed. A large cable pulley ensures a long service life for the steel cable. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Nljdpedf Ud Sjfx Ai Nsf Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 l/min of hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version comes with a manual hydraulic valve and hoses to the motor. Article number: HAW1700-HV NOTE: Figures 2, 3, and 4 are examples of mounting options!

Condition: new, Hydraulic winch HAW1700 with electric valve incl. manual operation and radio remote control for mounting on wood splitters, cranes, mini excavators, tractors, forklifts, mowing tracked vehicles, and telescopic loaders, for use in viticulture and horticulture, agriculture, construction, and forestry, as well as many other applications. Equipped with an electric hydraulic valve and radio remote control. The hydraulic winch HAW1700 can simplify many tasks. Maximum rope capacity of 30 m with 6 mm wire rope. Standard equipment includes 20 m of 6 mm wire rope. ⦁ Pull and position firewood for the wood splitter ⦁ Pull logs onto a trailer ⦁ Pull out tree stumps and trees ⦁ As an auxiliary winch on skidders and small excavators ⦁ As a winch for small tractors and narrow-gauge tractors A robust steel construction with the possibility of mounting on both sides (bottom, rear, top) with M12 threads. This allows for flexible use of the winch. Large, double-bearing rope pulley for long wire rope life. The pulling force is 1700 kg as standard. The winch can be installed in various positions. An optional hydraulic brake is available. Depending on the required pulling speeds and forces, we can offer you different options. Please contact us, and we will be happy to advise you. ⦁ Maximum working pressure: 225 bar peak ⦁ Continuous operating pressure: 175 bar ⦁ Displacement: 400 ccm ⦁ Torque at 225 bar: 870 Nm peak ⦁ Torque in continuous operation: 380 Nm ⦁ Maximum pulling force: 1700 kg ⦁ Weight: 49 kg ⦁ Rope speed: 47 m/min at 60 l/min oil flow ⦁ Color: red ⦁ Including hoses from the valve to the motor Dimensions: ⦁ Length: 500 mm ⦁ Length with rope inlet: 570 mm ⦁ Front width: 120 mm ⦁ Rear width: 180 mm ⦁ Bearing width: +30 mm Njdefn Tvhspfx Ai Nelf ⦁ Motor width: +200 mm ⦁ Height: 250 mm Included: Radio remote control for the winch. ⦁ Control range: up to 100 m ⦁ Temperature: -35 °C to +80 °C Protection class: IP65

Condition: new, Hydraulic winch for log splitters, cranes, mini excavators, tractors, agricultural vehicles, viticulture, horticulture, and many other applications. The hydraulic auxiliary winch can simplify many tasks: - Pulling and positioning firewood to the log splitter - Pulling logs onto trailers - Pulling out tree stumps and trees - As an auxiliary winch on forestry cranes and small excavators - As a winch for small tractors and narrow-track tractors Nedpedf Ufdefx Ai Nelf A robust steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes offers many possibilities for attaching the winch (the threads are cut and painted. They must be re-tapped with a tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is installed. Large cable pulley for long service life of the steel cable. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operation pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version includes an electric hydraulic valve and hoses to the motor. Article number: HAW1700-EV NOTE: Figures 2, 3, and 4 are mounting examples!

Condition: new, functionality: fully functional, operating pressure: 150 bar, empty load weight: 198 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 140 °C, KRANZLE THERM 1017 TR TECHNICAL DATA: Model: KRANZLE THERM 1017 TR Njdoy R Tfhjpfx Ai Njlf Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 1000 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 140 Operating pressure (bar): 150 Maximum pressure (bar): 150 Connected power (kW): 5.5 Weight with accessories (kg): 198 Fuel tank capacity (l): 35 Dimensions (L x W x H) (mm): 1050 x 800 x 1300 KRANZLE THERM 1017 TR WASHER EQUIPMENT KRANZLE pressure gun (M22 / quick coupler) Spray lance: KRANZLE (quick coupler) 25° flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt removal power. Integrated pressure hose reel 20m professional-grade pressure hose WHY CHOOSE THE KRANZLE THERM 1017 TR? The THERM 1017 TR is ideal for factories, workplaces, and industrial facilities. It is also successfully used by large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. The THERM line emphasizes smooth operation and continuous operation, making the 1017 TR model suitable for use in a wide range of industries. Additional handles allow for transporting the unit with additional accessories. The brass pump head extends the unit's service life. A large water filter protects the pump from contaminants that may be present in the water. Standard equipment includes a high-pressure gun with lance, a 20m high-pressure hose, a reel, and a 25° power nozzle. The device also features a quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. KRANZLE THERM 1017 TR RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires different locations. Additional handles allow for transporting the device with additional accessories. The brass pump head extends the device's lifespan. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. Standard equipment includes a high-pressure gun with lance, a 20m high-pressure hose reel, and a power nozzle. The device also features a quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. The device is completely new.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, operating pressure: 500 bar, total length: 2,050 mm, high-pressure hose length: 10,000 mm, total height: 1,450 mm, total width: 990 mm, pressure: 500 bar, type of input current: AC, empty load weight: 850 kg, fuel: diesel, heating capacity: 157 kW (213.46 HP), overall weight: 850 kg, warranty duration: 12 months, fuel tank capacity: 20 l, power: 18.39 kW (25.00 HP), pressure (max.): 500 bar, water pressure: 500 bar, The HST-XL HotWater was developed as a special-purpose unit specifically for demanding industrial applications and is characterized by its particularly robust and functional design. The simple, yet high-quality technology ensures high reliability and, at the same time, facilitates easy and maintenance-friendly servicing. The equipment includes two stainless steel hose reels with 30 m of high-pressure hose and 25 m of low-pressure hose. In addition, the unit features detachable tanks for BW-20-L canisters and defined lifting points for forklifts and cranes. Includes accessories: - 10 m high-pressure hose DN10, with kink protection on both sides - HP500 Soft CL high-pressure gun with rotating joint at the inlet - CL spray lance with nozzle protection, including high-pressure nozzle Available models: HSTXL4025HW | 400 bar | 25 l/min HSTXL5020HW | 500 bar | 20 l/min Nljdpfx Aozd T Rbji Nof

Condition: new, functionality: fully functional, fuel type: diesel, color: red, fuel: diesel, Year of construction: 2026, operating hours: 3 h, Equipment: air conditioning, all wheel drive, car registration, differential lock, hydraulics, trailer coupling, LX 401 CAB KUBOTA 4WD TRACTOR LX401 CAB, DEMO UNIT, AS NEW; NOT REGISTERED! CURRENTLY WITH 3.5 OPERATING HOURS With comfort cabin, Including 5-year manufacturer's warranty (up to 2,000 operating hours) Engine: 1,498 cm³, 4-cylinder Kubota diesel engine, CRS, EGR, DPF, Emission Stage V, Engine power according to EC 120 29.3 kW (39.8 hp), 4-valve technology, turbocharger, dual flywheel, fuel tank 32 l Transmission: 3-speed hydrostatic transmission, max. speed 30 km/h, automotive drive system, dual flywheel, cruise control 4WD: Engageable 4WD, Bi-Speed steering system, rear differential lock Comfort: flat driver's platform, fully hydraulic power steering, air-suspended comfort seat, 2 USB ports, storage compartment, cup holder, adjustable steering column, external rear PTO control Cabin: Spacious cabin, integrated 4-pillar construction, effective heating, air conditioning with recirculation mode, LED work lights front and rear, rear window heating, rear window wiper and front windshield wiper with washer system, 12V socket, radio preparation, rear fender extensions PTO: Rear PTO 540 rpm, mid-mount PTO 2,500 rpm, independently switchable Hydraulic System: Flow rate 20.4 l (work hydraulics), max. working pressure 160 bar, Rear three-point linkage Cat. I, lifting force at the lower link end 1,150 kg, Standard front equipment: 3 functions (single lever control unit with 1x double-acting control valve, 1x double-acting control valve with float position, changeover valve 3rd function), 6x hydraulic couplings (SVK according to ISO 7241-1-A BG3) Standard rear equipment (electrically switchable): 2 functions (1x double-acting control valve, 1x double-acting control valve with float position), 4x hydraulic couplings (SVK according to ISO 7241-1-A BG3) Drawbar Permissible unbraked trailer load: 1,500 kg Permissible braked trailer load: 3,500 kg Permissible vertical load: 500 kg Dimensions Overall length: 2,983 mm Overall height (depending on tires) 2,145 – 2,175 mm Wheelbase: 1,695 mm Weight (ROPS/Cabin) (depending on tires): 1,015/1,185 kg Max. front axle load (depending on tires): 1,080 kg Max. rear axle load (depending on tires): 1,920 kg Permissible total weight (depending on tires): 2,400 kg (with turf tires) IN ADDITION: - DAB+ radio with Bluetooth - Antenna splitter - Municipal tires front 220/55R14 - Municipal tires rear 320/70R20 - Front three-point linkage CAT 0 / hitch triangle - Front PTO cabin gearbox running in an oil bath with a multi-disc clutch, can be shifted under load, rated speed 1,000 rpm, standard profile 1 3/8“, 6-piece, direction of rotation left when viewed in the direction of travel - Headlights top, for winter service - Rotating beacon LED - Front fender set 215 mm - Rear fender extensions - Height-adjustable drawbar - Automatic drawbar for height-adjustable drawbar - SAFETY EQUIPMENT KIT Consisting of: multi-purpose lamp, fire extinguisher, combination bag with first aid kit, EC warning triangle, Nlsdszf Dz Hepfx Ai Njf warning vest according to EN 20471 Class 2 Current list price Euro 63,000,- plus VAT. Subject to change, typing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made excluding any guarantee or warranty.

Condition: new, power: 316 kW (429.64 HP), first registration: 07/2023, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 290 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro3, suspension: steel, loading space volume: 20 m³, Year of construction: 2023, Equipment: air conditioning, = Additional Options and Accessories = - Leaf spring suspension - Power Take-Off (PTO) = Notes = Fuel tank: 290 liters Air conditioning Equipped with a Ravasini fuel tank with a capacity of 20,000 liters. Three compartments (6,800 l + 6,500 l + 6,800 l + expansion volume) Manhole with a 500 mm diameter cover, complete with inlet and vent valve, and including a collection basin in case of liquid spillage from the manhole. Pumping unit housed in a suitable stainless steel box, positioned on the rear of the vehicle. Positive displacement pump, 500 l/min. Flow meter with a flow rate of 550 l/min, complete with filter, degasser, check valve, and a positive displacement head with partial measurement at 5 resettable digits and total measurement with 7 non-resettable digits. Manually wound hose reel with 20 m of 1.5-inch hose and a delivery gun. = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,882 cc Transmission Gearbox: ZF16TX2240TO, automatic Axle Configuration Tire size: 315/80R22.5 Suspension: Leaf spring suspension Front axle: Steerable Weights Unladen weight: 13,400 kg Nedpfx Ajzn U Hxei Nolf Payload: 20,100 kg GVW: 33,500 kg Functional Body manufacturer: Ravasini Number of compartments: 3 Pump: Yes Hoses: Yes

Year of construction: 2026, condition: used, Machine no.: M0753/300/3/28/07, year of manufacture: 2007, rated force: 3,000 kN, rated power: 43 kW, machine weight: approx. 43,000 kg, strokes: approx. 25-100 mm, return time: approx. 0.209 s, stroke length: approx. 40-315 mm, maximum plunger adjustment: 150 mm, maximum installation space: 650 mm, upstream units: coil unrolling reel SOPREM S2371-EM-91-BP55, serial no.: 221003, year of manufacture: 2003, weight: 3,000 kg, SOPREM 1676-E-VV, year of manufacture: 2003, single-sided alignment unit, serial no.: 231003, power: 5.5 kW, feed unit RAZIOL EBAD 4000KL, oil unit, serial no.: 029, year of manufacture: 2017, control system: BECKHOFF, mounted on chassis, recorded coupling hours (November 2025): 34,303 h, total parts: 41,131,300. Nsdpfx Aijzqzd Ns Nslf

Condition: used, functionality: unexamined, Used Samoa high-pressure oil (reelmaster) hose reel + oil ratio pumps Manufacturer: Samoa Njdpjxt Ekfofx Ai Nelf Complete with 7 x Samoa air-powered ratio pumps / high-pressure stripped pumps Complete lot with accessories.

Condition: good (used), Year of construction: 2006, machine/vehicle number: 06202305, functionality: fully functional, total length: 14,000 mm, working width: 360 mm, Schober Converting Machine Nsdpfx Aow Ec U Iei Njlf - Die-cutting units - Reel to sheet - Fanfold - Magnetic stripes - Air shock web width 360 mm

Condition: excellent (used), Double-side Sizing & Edge Banding - Independent Machine (1st &/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 0,4 - 12 Panels thickness (min/max) mm 8 - 100 Working width (min/max) mm 240 - 3000 Numerical Control Power Control PC22 (Windows XP) Software woodCommander Adjustable feeding speed (m/min) 10 - 40 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 400 SIZING PART (for each side): Pre-Milling unit (2 x Kw 6,6) Free place Nlodpfott Iudjx Ai Nsf LEFT SIDE only: 2 x Milling grooving rotating unit (2 x KW 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) E34 Pressing rollers (revolver) both for straight and shaped edges (softforming) GL sextuple Edge coils supporting unit (No. of reels) 1 Snipping (end-cutting) Unit WK14 (2 x 0,8 KW) 25 m/min (0°-30°) Fine Trimming Unit (2 x 0,55 KW) 0°-30° Corner-rounding unit FF12 (4 motors) WD70 20 m/min Profile edge scraping unit PN20 Finish processing unit (Glue scraper + Buffing unit) FA 11

Condition: used, Year of construction: 2023, Atlas Copco XAS 58-7G Compressor Trailer, FIN: P0881834 * Kubota D1105-EF02 diesel engine * 18.2 kW / 24 hp * TEX 230PE H28 hammer * TEX 10PSKL hammer * TERRA hammer TU 055R earth drill * Compressed air hose * Hose reel Compressor with generator, ATLAS COPCO XAS 58-7, manufactured: 11/2023 Equipment: Construction compressor Atlas Copco MCT, type XAS 58-7 G, with integrated generator, 6 kVA, sockets: 2 x 360V / 1 x 230V. Unbraked chassis, height adjustable, initial oil filling, crane eye, closed bottom pan, starter motor protection (SMP), overrun and parking brake, reversing automatic, spur gear, support leg (unbraked version), truck DIN tow hitch (400mm), lighting according to StVZO, operating permit. Accessories: Compressed air hammer Atlas Copco, type TEX 10 PSKL, weight: 10.7 kg Compressed air hammer TEX 230 PE, weight: 27 kg Various pointed and wide chisels, asphalt chisel 115 mm wide TERRA hammer TU055R, TERRA compressed air hose, length approx. 15,000 mm, TERRA oiler. Original price: complete with accessories, €28,000 net. * New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates; furthermore, we can arrange for the transport of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English and Russian!---- No liability for printing and typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. Nlodpfx Aioyai Eus Njf The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Come and see for yourself! Our services for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transport We will gladly assist you in organizing special transport. Day registrations / export license plates We will gladly assist you in obtaining export license plates/short-term registrations. Processing of customs formalities

Condition: used, Year of construction: 2023, Atlas Copco XAS 58-7G Compressor Trailer, FIN: P0881834 * Kubota D1105-EF02 diesel engine * 18.2 kW / 24 hp * TEX 230PE H28 hammer Nledpfsy Rv Ilsx Ai Nsf * TEX 10PSKL hammer * TERRA Hammer TU 055R rock drill * Compressed air hose * Hose reel Compressor with generator, ATLAS COPCO XAS 58-7, Year of manufacture: 11/2023 Equipment: Construction compressor Atlas Copco MCT, Type XAS 58-7 G, with integrated generator 6kVA, socket: 2 x 360V / 1 x 230V. Unbraked chassis, adjustable in height, initial oil fill, crane eye, closed bottom tray, starter motor protection (SMP), overrun and parking brake, reversing automatic, spur gear, support leg (unbraked version), truck DIN tow hitch (400mm), lighting according to StVZO (German Road Traffic Licensing Regulations), operating permit. Accessories: Compressed air hammer Atlas Copco, Type TEX 10 PSKL, weight: 10.7 kg. Compressed air hammer TEX 230 PE, weight: 27 kg. Various pointed and flat chisels, asphalt chisel 115 mm wide, TERRA Hammer TU055R, TERRA compressed air hose, length approx. 15,000 mm, TERRA oiler. Original price: complete with accessories 28,000 € net. * New main inspections / safety checks or weight adjustments are available upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transportation of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for printing and typographical errors, changes, prior sale and errors reserved! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a wide range of vehicles. Our corporate philosophy is characterized by fairness and reliability. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person to assist them in the purchase or sale of vehicles. See for yourself! Our services for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organizing special transports We will gladly help you organize special transports. Short-term registration / export license plates We will gladly help you obtain export license plates/short-term registration. Handling customs formalities

Condition: excellent (used), LINE of Double-Side Sizing-Milling & Edge Banding (also "SOFTFORMING") with automatic handling. Max. panel thickness 100 mm. Composed by the following machines: W05025A) Automatic LOADER (portal / gantry) "MAHROS" Mod. Brush W05025B) Double-side Sizing and Edge Bander "HOMAG" Mod. KFL 620/23/QE/30 (softforming) SIZING PART (for each side): Pre-Milling unit (2 x Kw 6,6) Free place LEFT SIDE only: 2 x Milling grooving rotating unit (2 x KW 6,6) EDGE BANDING PART (for each side): Glueing Unit (EVA glue with pre-melter) Edge coils supporting unit (No. of reels) 1 pressure zone for both STRAIGHT and SOFTFORMING Snipping (end-cutting) Unit WK14 (2 x 0,8 KW) Fine Trimming Unit (2 x 0,55 KW) Corner-rounding unit FF12 (4 motors) WD70 Profile edge scraping unit PN20 Nledpfett Dqpjx Ai Nef Finish processing unit (Glue scraper + Buffing unit) FA 11 W05025C) Automatic UNLOADER-STACKER (portal / gantry) "MAHROS" Mod. Brush

Condition: used, mileage: 19,578 km, power: 92 kW (125.09 HP), first registration: 03/1988, fuel type: diesel, overall weight: 9,700 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,500 mm, total height: 3,000 mm, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle today, subject to prior sale, errors, and omissions: IFA W 50L LF fire engine with double cab, pump, and tank First registration: March 10, 1988 19,578 km (original) Engine: 6,560 cc Njdpfezlcahox Ai Njlf 92 kW / 125 hp Permissible gross vehicle weight: 9,700 kg, unladen weight: 81.50 kg, payload: 1,550 kg Overall length: 7,700 mm x overall width: 2,500 mm x overall height: 3,000 mm Double cab, 2 seats in front, 7 in the back 2 rotating beacons in front, 1 on the passenger side in the back + 1 flashing light on the left and right in the back, on top Towing eye in front Power connection/supply connection on the passenger side in front 2 hose holder housings on top, walkable roof rack 2 water connections on the driver's side and passenger side in the back, 1 in the back Water tank under the vehicle Hose reel Complete pump unit Trailer hitch Hose reel holder in the back Work spotlights in the back, on top 2 seats in front, 10 seats in the back 5-speed manual transmission Manual roof Auxiliary heater Siren Good overall condition Price: €5,500.00 (VAT not shown) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties is the local court of Ludwigslust for disputes up to €10,000, and the regional court of Schwerin for disputes exceeding this amount. Subject to errors, omissions, and prior sale.