Used Reel for sale (745)

Condition: excellent (used), Year of construction: 2019, overall weight: 500 kg, total length: 2,000 mm, total width: 1,600 mm, total height: 2,200 mm, Load capacity: 2,200 kg Table – Ø: 1,525 mm Band width: max. 150 mm Band thickness: max. 1.27 mm Stack height: max. 760 mm Speed: max. 10 RPM, continuously adjustable Nsdpfozvqzzjx Aa Ujwk Design: o Frame in a robust welded construction o Loop control via a joystick with a roller o Speed can be pre-selected via a display o Right/left rotation o Fixture for inner diameter

Year of construction: 2019, condition: like new (used), Automated system to laminate reel of chromotography paper between 2 reels of polyester handle material and on to profile the chromotography paper tip and then cut the web of laminated polyester with chromotography paper into single profiled strips. The Matrix 7100 Laminator was developed to meet the demanding requirements of the lateral flow test strip industry for a moderately priced system capable of supplying the membrane lamination needs of the moderate to high volume production facility. The unit was designed to allow process flexibility while at the same time optimizing product yields and throughput. Numerous options are available allowing the system to support a wide variety of material types, lamination configurations and process variables. Njdoya H S Sepfx Aa Uswk The Matrix 7100 allows for continuous lamination of membranes onto a plastic backing web and the cutting of the resultant laminate into discrete cards for further processing on other, downstream equipment. Numerous options provide the utmost in process flexibility at a very low overall cost. The integral touch screen operator interface terminal provides for multiple recipe storage and simple and reliable setup and operation while simplifying process validation. Key Features Touch screen operator interface terminal for simple setup and operation Simple web guide adjustment Rapid changeover to support multiple products Flexible to support changing requirements Base configuration supports Backing Web with Release Liner plus 4 membranes Extruded aluminium structural frame Flying shear for continuous card cutting Reel to reel lamination option

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Load capacity: 150 kg Band width: max. 150 mm Coil diameter: max. 800 mm Spreading range: 230 ... 545 mm Design: Nodpfozi Exuex Aa Uewk • Motorized drive • Loop control via contact switch on the reel base • Limit stop disc at the rear • Limit stop ring at the front • Selector switch for left/right rotation • Selector switch for manual/automatic operation

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: M 09.10.288, product width (max.): 700 mm, product length (min.): 120 mm, input voltage: 400 V, working height: 850 mm, input frequency: 50 Hz, Equipment: documentation/manual, Kallfass Universa 700 – Fully-Automatic Side Sealer + KALLFASS Schrinktunnel COMPAKT650 D Industrial packaging machine for shrink-wrapping larger products such as picture frames, furniture, insulation material and similar goods. Manufactured by Kallfass Verpackungsmaschinen GmbH (Germany), CE certified. Key specs: Njdpfx Aezwld Hea Uewk Max. production speed: up to 65 packs/min Cross seal bar width: 750 mm Max. sealing frame height clearance: 300 mm Min. product length: 120 mm Film: centre-folded or flat, 12–80 micron; reel diameter up to 400 mm, width up to 900 mm Permanently heated seal bar with exchangeable sealing ledge, maintenance-free, PLC temperature control Siemens S7 PLC with colour touchscreen operator interface (multi-language) Power: 400V, 50Hz, 3-phase, 3.5 kVA Dimensions: approx. 2500 x 1400 x 2100 mm Colour: Kallfass Anthracite Complete with original technical documentation and CE declaration of conformity.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Characteristics: * Storage capacity: ~ 10300 T * Inlet: max. 75 reels/hr * Outlet: max: 25 reels/hr * Channels: 264 * Storage length: ~ 5160 m * Height: ~ 30 m * 2 receiving robots * 2 reel stacker cranes Description Automated warehouse for storage of (paper) reels with the following characteristics: * Diameter: 500 – 1500 mm * Width: 600 – 2250 mm * Weight: max. 5000 kg Nsdsvl Enxspfx Aa Uswk

Condition: reconditioned (used), functionality: fully functional, operating pressure: 175 bar, high-pressure hose length: 20,000 mm, empty load weight: 224 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 140 °C, NILFISK ALTO NEPTUNE 7-63 X2 HOT WATER PRESSURE WASHER This machine features new accessories, including a German R+M gun, a stainless steel lance, a steel braided hose, and a 25° power nozzle. The built-in hose reel makes it easy to roll up and store the hose. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 175 bar and up to 1170 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~ 3 phase Discharge capacity [l/h]: 1170 Operating pressure [bar]: 175 Max. Heating temperature [°C]: 100-140 Connection power [kW]: 8.3 Cleaning agent tank [l]: 15+10 Nsdoxdzl Tjpfx Aa Ujwk Hose length [m]: 20 Weight [kg]: 224 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 20m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: E-018455, Two units are for sale. One in blue and one in green. The price quoted is for one unit. Nedpfxezqvafo Aa Uewk

Condition: used, functionality: fully functional, Year of construction: 2010, coil inner diameter: 280 mm, coil outer diameter: 850 mm, coil weight: 1,000 kg, coil width: 1,250 mm, Manual reel / strip uncoiler with transport rollers Note: Price refers to the sale of the depicted sheet metal Njdpfxsy Dc N No Aa Uewk

Condition: excellent (used), functionality: fully functional, Year of construction: 1994, Load capacity: 150 kg Band width: max. 240 mm Coil diameter: max. 800 mm Spreading range: 320 ... 520 mm Nwjdpfxozi Ex Ij Aa Uok Design: • Motorized drive • Loop control via contact switch on the bobbin base • Limiting disc at the rear • Limiting ring at the front • Manually adjustable brake • Potentiometer for start-up delay

Condition: used, Year of construction: 2015, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 119, inner diameter: 50 mm, cutting length (max.): 4,000 mm, Paper core production line with a packaging system for cores with an ID of 38-60mm, 12 layers for paper reels, multi-knife cutter (5 knives), gluing section with a heating system for dextrin adhesive. Very good condition – recently serviced. A large number of spare parts included. Nwodpfjzul Sfox Aa Usk

Condition: excellent (used), functionality: fully functional, Manufacturer Julius, type AH 41 Inner coil diameter from 250 to 300 mm Max. width 295 mm With brake Good condition, ready for immediate use Nsdpfxeziwxto Aa Ujwk

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal • Servo punching shear • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence Nwsdpfxszu Ryhe Aa Ujk TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics)

Condition: used, Year of construction: 1989, machine/vehicle number: SN: 00789901, functionality: unexamined, pressing force: 815 t, Press 1, manufacturer: Umformtechnik Erfurt GmbH, type: PKZZI 800.1/3150x1600/500E, serial number: 00789901, year of manufacture approx. 1989, 8000 kN, last service in 10/2025, machine in operation until 12/2025. Technical data of the press according to the nameplate: Press force max. 8,000 kN – at a distance in front of the die of 12.5 mm Press force 2,500 kN – at a distance in front of the die of 200 mm Stroke rate in idle 10 to 20 min-1 Stroke of the ram 500 mm Adjustability of the ram: 500 mm Strip feed system consisting of: Roller feed, manufacturer: GSW Schwabe, type VRMA80/78, machine no. 2011-60187, year of manufacture 2011 with reel 1 (sandwich processing), SAWAB reel, year of manufacture 2011 Nodpfx Aajzvdm Rs Ujwk with reel 2, manufacturer: GSW Schwabe, type: LMHR1000/1100, no.: M2011-00171, year of manufacture 2011 with reel 3, manufacturer: GSW Schwabe, type: MHR5/1400, serial no.: M2011-00170, year of manufacture 2011 including enclosure GWS project no.: 2011-60187 with peripherals: - Conveyor belt - Raziol system Function and technical data not verified without additional items/without further accessories, unless explicitly stated as part of the item WE STRONGLY RECOMMEND PARTICIPATING IN THE INSPECTION! If interested, please contact us via email!

Condition: used, Year of construction: 1998, machine/vehicle number: SN: 5-2067, functionality: unexamined, power: 45 kW (61.18 HP), pressing force: 255 t, overall weight: 24,800 kg, PME Erfurt, Type: ZH 2500 / 1600, Serial No.: 5-2067, Year: 1998, 2500 kN, in operation until December 2025 Technical data of the press according to the nameplate: Press force: 2,500 kN Stroke rate: 25-75 strokes/min Nwsdpezvcxlefx Aa Uek Rated stroke rate: 40 strokes/min Stroke: 20-200 mm Ram adjustment: 140 mm Total power: 45 kW Operating voltage: 400 V Frequency: 50 Hz Machine weight: 24,800 kg Strip feeding system consisting of: PBK, Type: Roller feeder WV-120/DSM 500P, Serial No.: BA00482, Year: 1998, PBK, Type: Straightening machine, Year: unknown, PBK, Type: Unwinding reel SCi 530 M, Serial No.: BA00482, Year: 1998 including enclosure and roller conveyor with peripherals: - Conveyor system Functionality and technical data have not been verified. without additional items/without further accessories, unless explicitly stated as part of the item. If interested, please contact us by email.

Condition: good (used), Reel, unwinding reel, winding reel, unwinding reel, sheet metal unwinder -Reel: with 3 retaining brackets -Diameter: 950 mm -Reference: M20 shaft, dimensions see photos -Dimensions: Ø 950 x 410 mm Njdpfjx Ifc Tjx Aa Uowk -Weight: 35 kg

Condition: good (used), Hydraulic decoiler, movable on rollers Load capacity 20,000 kg (with decoiler support 30,000 kg) Hydraulic expansion: max 550 mm min 480 mm Decoiler drum: 1700 mm Drive: Gearbox with electric motor and electromagnetic clutch, hydraulically braked with proportional valve Nsdpfx Asw Up N Nsa Uewk Pressing device with drive roller was available. Drawings for a new one suitable for the decoiler, as well as decoiler support for a load capacity of 30,000 kg, are available.

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Nwjdpfx Aajy Hlvwo Uek Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational.

Condition: good (used), Double reel, reel, unwind reel -Unwind reel: Double reel with 2 servo motors (each reel driven individually) -Drive: 2 Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 servo motors -Reel: Ø 1050 mm -Photos: see photos Nwodpfx Aoylil Eja Ujk -Dimensions: 1050/840/H1755 mm -Weight: 200 kg

Condition: good (used), Year of construction: 1989, operating hours: 3,050 h, Hyster H2.50XL triplex 425 freelift ISUZU DIESEL forklift Video can be sent via WhatsApp. Rolling stock available, see website. Prices are ex Nuland. Van de Wert Trading B.V. has a variable stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without guarantees. (see our general terms and conditions) Nsdpezuwg Iefx Aa Ujwk You can arrange a viewing and/or test drive by appointment without obligation. Please call in advance as we are not constantly on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Discharge – hydraulically expandable reel Reel drum: 800 mm long Reel diameter: max 520 mm, min 485 mm Travel distance: approx. 200 mm Load capacity: 16,000 kg Drive: electric motor / gearbox Power: 4.0 kW Nsdpfx Aew Uqmvsa Uowk Gearbox speed: 700 min-1 Manufacturer: Bauer

Condition: good (used), Year of construction: 2019, operating hours: 12,150 h, load capacity: 1,600 kg, lifting height: 5,200 mm, fuel type: electric, mast type: triplex, construction height: 2,270 mm, Year of construction: 2019 Field of application: Internal logistics Nwedezqhi Sspfx Aa Uek

Year of construction: 2022, condition: ready for operation (used), A GSW decoiler is available. Load capacity: 3000kg, strip width: 650mm, max. strip cross-section: 107.5mm/0.35mm, machine dimensions Y/Z: approx. 1150mm/2000mm. An on-site inspection is possible. Nsdpfx Aasyz Apwj Uewk

Condition: ready for operation (used), Year of manufacture: 1988 / Overhauled in 2019 by HYDAC Accessoirs with a completely new control system Load capacity: 2,000 kg Table diameter: 1,500 mm Band width: max. 100 mm Band thickness: 0.3 – 1.0 mm Maximum coil height (incl. pallet): approx. 850 mm Number of pinch rollers: one pair Weight: approx. 2,200 kg Dimensions: approx. 2,600 x 2,100 x 1,700 mm Execution/features: • Sturdy welded frame construction • Coil hold-down plate • Large band deflection roller • Deflection roller and pinch rollers hydraulically height adjustable • Motor-driven pinch rollers with lateral band guide and roller cage Nwjdpfx Aaoy Hlgpo Usk • Deadman switch for safe band threading during setup operation at safe speed • Direction of operation (forward/reverse) selectable via hand switch • Continuously adjustable pulling force via potentiometer • Loop control system • Free-standing control cabinets with operator panels

Condition: good (used), Reel, reel rod, trapezoidal thread spindle, spindle -Reel: Reel rod with quick-release fastener -Type: unfortunately without a type designation Nwjdpsykp S Aofx Aa Uek -Shaft: Ø 44 mm, dimensions see photos -Dimensions: Ø 98 x 440 mm -Weight: 3.3 kg

Condition: good (used), Year of construction: 1991, operating hours: 49,637 h, functionality: fully functional, machine/vehicle number: 9666, ram adjustment: 64 mm, conveyor belt width: 203 mm, pressing force: 50 t, control cabinet length: 940 mm, control cabinet width: 760 mm, stroke length: 1,651 mm, input voltage: 380 V, overall weight: 9,000 kg, control voltage: 24 V, sheet thickness steel (max.): 4 mm, input frequency: 50 Hz, sheet thickness aluminum (max.): 4 mm, Technical Data Manufacturer: BRUDERER AG Model: BSTA 50 EL CNC Machine Type: CNC High-Performance Punching Machine Year of Construction: 1991 Njdpfx Aszuur Usa Uowk Machine Number: 9666 Press Force: 500 kN (50 t) Connected Load: 40 kW Main Motor Power: 25 kW Supply Voltage: 380 V / 50 Hz Control Voltage: 24 V DC Compressed Air Connection: 6–10 bar Operating Hours: approx. 49,637 h Adjustable Stroke: 16–51 mm Mounting Space/Clamping Plate: 760 x 940 mm Main Drive: 22 kW Power Supply: 400 V / 50 Hz Table Area: 940 x 580 mm Strip Feed Height (adjustable): 50–140 mm Max. Strip Width: 203 mm Max. Material Thickness: 4 mm Dimensions of machine with BBV 202: 2390 x 1270 x 3090 mm Machine Weight: approx. 9000 kg Configuration 2 x BRUDERER BBV 202/120 DOUBLE strip feeder KOHLER leveling machine 100.180/2.500.2M, year of construction 1992 Unwinding reel / coil reel Soundproof cabin Conveyor belt for part removal Lifting and sorting device for containers Roller conveyors and stacking racks Technical documentation available Description Complete BRUDERER high-performance punching line consisting of a precision punching machine BSTA 50 EL, BRUDERER strip feeder BBV 202/120, KOHLER leveling machine, unwinding reel, soundproof cabin, and discharge and conveying equipment. The system is designed for the efficient processing of strip material in high-speed punching operations. Extensive technical documentation is available.