Used On Recoiler for sale (64)

Condition: used, Pay-off and take-up decoiler for coil material WANZKE CAMU Type SC 515/M Serial no. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Mandrel shaft diameter: 90 mm Distance from mandrel crown center to mandrel base: 950 mm Mandrel crown speed: 13 rpm Gusdpfx Aaswvv Rqjbeh Motor speed: 920 rpm Gearbox transmission ratio: 1:70 Mandrel drive motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gearbox, directly mounted on the mandrel shaft - Geared motor with electric brake - Mandrel shaft with mechanical slip clutch, pre-tensioned and adjustable via disc springs - Mandrel crown without strip travel arms - Without electrical control system and without loop switch Space requirement (L x W x H): 1300 x 800 x 1230 mm Weight: 380 kg Good condition

Year of construction: 1986, condition: good (used), strip width: max. 200 mm strip thickness: 0,1 - 1 mm Gsdpfxebh Ucbe Aabjuh coil weight: 0,5 t mandrel Ø: 304 mm

Year of construction: 1995, condition: ready for operation (used), Two Wenzke rewinders are available. 1) Wenzke PM 1000/DC-S (heavy version), max. outside diameter: 2800mm, inside diameter: 800mm, winding width: 700mm, max. pipe diameter: 75mm PE, year of manufacture: 1995. 2) Wenzke PMS 500, max. outside diameter: 2800mm, inside diameter: 800mm, winding width: 700mm, max. pipe diameter: 75mm PE, year of manufacture: 1988. Documentation partially available. On-site inspection is possible. Individual sale possible. Gusdpfxeun St Ns Aabjh

Condition: used, Decoiler and recoiler for coil material HMS Type BA 1.5-06/80 Machine no. Year of manufacture: 1991 Coil weight max. 8000 kg Coil outside diameter max. 1600 mm (with coil car) Coil outside diameter max. 2000 mm (without coil car) Diameter of coil support disc Ø 1700 mm Coil inner diameter, expansion range: 460-520 mm Coil width, nominal width max. 630 mm Gujdpfx Ajhx R Etsaboh Width of expansion jaws: 750 mm Height of mandrel above base plate: 1500 mm - Mandrel driven by hydraulic motor with gearbox and gearwheel - Pneumatic overrun brake on mandrel TWINFLEX - Hydraulic service brake - Hydraulic stop brake - Hydraulic expansion of the mandrel, centrally via wedge slider system - Hydraulic pressing arm with hydraulically driven double pivot roller - Coil car with 12 ton lifting capacity and 300 mm lift - Decoiler on above-floor traveling frame with powered cross-travel drive - Hydraulic unit installed externally (was also used for other functions on a strip processing line) - Without electrical control cabinet (there is a control cabinet which supplied the entire strip processing line) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Net weight approx. 5 tons Good condition – not electrically operational

Year of construction: 1976, condition: good (used), strip width: 300 - 1.350 mm strip thickness: 0,35 - 3 mm coil weight: 12,5 t Guedpfx Aajbh Ubwobjh mandrel Ø: 508 mm

Condition: used, Pay-off and Take-up Decoiler KEMMERICH / STANGE Type HA 1500 / 500 Serial No. 51673 Year of Manufacture: 2023 (unused) Maximum coil weight: 1500 kg Coil width with guide arms: 500 mm Coil width without guide arms: 670 mm Coil inner diameter: 300 - 370 mm Coil inner diameter with extension jaws: approx. 380 - 440 mm Decoiler turntable diameter: Ø 2080 mm Coil outer diameter without pressure arm: max. 2350 mm Coil outer diameter with pressure arm: max. 2200 mm Guedsua Nngepfx Aaboh Center of turntable to decoiler base: 1200 mm Decoiler shaft, support shaft: Ø 70 mm Speed: approx. 1.5 to 20 rpm Motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - stepless turntable speed adjustment via frequency converter - loop switch / proximity switch for decoiler STOP - central expansion via hand crank - clockwise and counterclockwise rotation - pneumatic pressure arm with running roller - 4 guide arms, 870 mm each - 4 plastic extension jaws for adapting the turntable Space requirement (L x W x H) Weight: 970 kg Very good condition

Year of construction: 1995, condition: good (used), strip width: max. 420 mm Guedpfxobibqwo Aabeh strip thickness: max. 12 mm coil weight: 2,4 t

Year of construction: 1980, condition: good (used), strip width: 1.650/1.750 mm strip thickness: 0,4 - 3 mm Guodpfxjdn I Hrs Aabsh coil weight: 10 t interchangeable mandrels, Ø: 304/406/610 mm

Year of construction: 1985, condition: good (used), strip width: 100 - 750 mm strip thickness: 0,5 - 4 mm coil weight: 10 t mandrel Ø: 406/508 mm Gujdpfxjd Ha Hbe Aabeh

Year of construction: 2017, condition: excellent (used), strip width: 800 - 2.400 mm Gujdsg Ewanepfx Aabeh strip thickness: max. 3,5 mm coil weight: 20 t mandrel Ø: 600 mm

Year of construction: 1995, condition: good (used), strip width: max. 1.900 mm strip thickness: 0,3 - 3 mm Guodpfx Aog Iigvjaboh coil weight: 25 t mandrel Ø: 508 mm

Condition: used, Year of construction: 1998, functionality: fully functional, For sale: Coil metal decoiling, slitting, and recoiling line Condition: used, connected – available for live demonstration. Designed for coil metal decoiling, precise slitting into narrower strips, and recoiling into smaller coils. Technical specifications: Year of manufacture: 1998 Made in: Poland Max. metal width: 1250 mm Knife pairs: 5 Longitudinal slitting, steel: min 0.4 mm / max 1.2 mm Film application function Scrap cutting guillotine Line includes: Decoiler 5 T Recoiler 5 T Multi-knife disc shears Braking and separating segment Turnstile with separator Control panel Purpose: The line is intended for preparation of coil metal for further processing: Guodsxlcp Nopfx Aabsh decoiling, precise longitudinal slitting, recoiling into smaller coils. If you have further questions – we will be happy to assist you.

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: E31PK2308......., This listing features the latest generation of the VarioCooking Center, the iVario Pro XL 150-litre from premium manufacturer Rational (successor to the VCC 311). This multifunction tilting skillet is equipped with the pressure cooking option and Balanced Power 34 kW (instead of 41 kW, reduced connected load). The unit has been inspected in our in-house workshop, received a fresh inspection, and is fully functional. Accessories for the iVario XL can be purchased separately for an additional fee upon request. Device available from week 44. You will receive an invoice with VAT shown separately. The images shown are sample photos. Original photos will follow shortly. Service: We are happy to arrange for a certified Rational customer service technician for you, nationwide within Germany. Our device service for you: - 6-month warranty on all electrical parts - High-quality branded equipment at fair prices - Professional refurbishment/inspection & expert cleaning - Tested & fully functional – or your money back - Flexible shipping or self-collection options - Competent advice – before and after your purchase - Provision of user manuals, wiring diagrams & spare parts - DGUV V3 electrical safety inspection Technical data: - W x D x H: approx. 1365 x 894 x 1078 mm - Power connection: 400 V / 34 kW / 50 Hz - Serial number: E31PK2308..... - Year of manufacture: 2023 - Capacity: 150 litres - Weight: 256 kg - Includes pressure cooking option - Includes Balanced Power option - Condition: used, tested, fully functional Special features: - iCookingSuite – intelligent cooking assistant with 6 operating modes: meat, fish, vegetables & side dishes, egg dishes, dairy & desserts, soups & sauces, or 5 cooking methods: boiling, frying, deep frying, braising, and finishing - iZoneControl: flexible division of the pan bottom into zones with different temperatures - Low-temperature cooking (including overnight), confit, sous-vide cooking - Vario Cooking Control mode: desired result selected by touch, e.g.: from light to dark - VarioBoost: patented heating system for absolutely uniform and precise temperature transfer - Programming mode: creation of manual programs and management of cooking processes - Integrated WiFi interface, e.g., for connection to ConnectedCooking Additional details: - Integrated 230 V socket - Integrated hand shower with recoil mechanism and adjustable spray - High-quality pan bottom - Seamless design with rounded corners - Core temperature sensor with 6 measuring points - 1,200 programmable and nameable programs, each with up to 12 steps - Integrated hose spray on the device, integrated water drain in the pan - Temperature unit adjustable in °C or °F - Pan can be tilted - Lid with integrated water inlet - Automatic display of service messages - IPX5 jet water protection - USB interface for HACCP data output and updates - Includes base frame with plastic feet Functions: - Manual mode (30°C–250°C): set liquid temperature, set pan bottom temperature, set oil temperature, automatic, precise water filling device, Delta-T cooking - Auto Lift: lifting and lowering mechanism (baskets for boiling and frying). Frying function is locked but can be unlocked upon request. Gujdpfx Aexnby Ssaboh Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by prior arrangement

Condition: new, Year of construction: 2025, Motorized thicknessing table stroke with two speeds Numerical display for working height Grey cast iron thicknessing table The thicknessing table is mounted on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the thicknessing table Noise and chip protection curtain at workpiece infeed and outfeed as standard Adjustable roller contact pressure Front infeed roller with helical toothing Pull-out roller with rubber coating Powerful industrial engine Equipment details Models TERSA with Tersa planer blade shaft Planer blade change in seconds When the machine is started, the planing knives are automatically clamped by centrifugal force - self-locking The blade projection adjusts automatically without using setting gauges Work table The work table is supported on four large trapezoidal threaded spindles, which ensure maximum stability in all working conditions With electrical table adjustment as standard Due to the special lifting device, the table position is maintained even without locking Helical toothed steel feed rollers for a constant and even wood feed second, rubberized feed roller at the outlet Massive recoil protectors prevent the recoil of workpieces A 4-knife shaft ensures an optimal planing pattern Dimensions and weights Length approx. 1305 mm width/depth approx. 1080 mm Weight approx. 750 kg Dust extraction connection Guedeff Efajpfx Aabeh Suction nozzle diameter thickness 150 m

Condition: new, Year of construction: 2025, functionality: fully functional, Gannomat Selekta dowel driving device Year of manufacture 2025 Dowel driving machine with gun for simultaneous gluing and dowel driving. Gsdpfx Aasvxgm Nsbjuh For professional and efficient processing of dowels in furniture and frame construction. • Constant dowel driving protrusion • Always constant and correct amount of glue • Due to the correct amount of glue, no subsequent cleaning of the workpieces is necessary • Easy cleaning of the glue system via EasyClean, the automatic cleaning program • Automatic ejection of dowels with the wrong diameter and length thanks to Auto-DL-Selekt • Dowels are not driven into the bottom, the dowel driving protrusion is set independently of the drill hole depth • Recoil-free, extra-light and comfortable glue-dowel-driving gun • Great time saving compared to glue bottle and hammer

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Dowel insertion device for simultaneous gluing and dowel driving Dowel feeding via maintenance-free vibratory feeders Fully automatic, maintenance-free electronic control with selector switch for FLUSHING/GLUING/GLUING & DRIVING Gsdpfx Aasw Rhlhebouh Self-contained glue system 1 stainless steel container (5 l) for glue and 1 stainless steel container (5 l) for water Lightweight, handy, and recoil-free gun for 8 mm dowels Availability: by arrangement Location: Flörsheim

Condition: used, OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) is perfect machine for both tasks: cut-to-length cutting and longotudinal cutting of coil metal into strips with 2000mm coil width, 10mm maximum metal thcikness and 30t coils OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) Composition of the line: 1. Stocking ramp 2. Loading cradle 30t 3. Double cone uncoiler 4. Hydraulic peeler table 5. Arm with roll-press roller-bridge structure 6. Assembly including pinch-roll and pre-straightener 7. crop shear 8. tilting roller conveyor on pit 9. slitting shear shaft diam. 200mm 10. mobile side guide 11. tensioning rollway 12. side trim rewinder 13. burr crusher 14. recoiler + unloading crandle 30tons. 15. tensioning rollway to leveler 16. unger leveler 17. guillotine flying shear Gjdpfstvdy Iex Aabeuh 18. pinch-roll for sheet ejection 19. stacker 20.roller conveyor for stack ejection 12mt. 21 hydraulic control unit 22. electrical equipment 23. tooling

Condition: used, TECHNICAL DETAILS - Parts per minute : 300 - Cutting diameter : 6 [mm] - Die ejection : 55 [mm] - Floor space (width) : .97 [m] - Floor space (length) : 2.77 [m] - Motor : 7.5 [hp/kW] - Net weight : 3500 [kg] - Gross weight : 4100 [kg] EQUIPMENT Gsdpfjuhb Twex Aabouh - Equipped with ejector recoil between rough part and finishing (RLKO) - Positive ejection (TKO) - Tooling as per photo

Year of construction: 2023, condition: used, machine/vehicle number: E21VK23108075642, This is the latest generation of the iVario Pro L from the premium manufacturer Rational. The unit has just undergone a fresh inspection in our in-house specialist workshop and is in good used condition, complete with a 6-MONTH WARRANTY! Accessories for the iVario can be purchased separately for an additional charge if desired. You will receive an invoice with VAT shown separately. Service: We are happy to arrange a certified Rational customer service provider for you across Germany. Are you looking for a specific Rational device type? Contact us— we have access to an extensive range of both used and new equipment. We are also happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our Device Service for You - 6-month warranty on all electrical parts - High-quality branded equipment at fair prices - Professional refurbishment / inspection and expert cleaning - Checked & fully functional — or your money back - Shipping or self-collection flexibly selectable - Expert advice — before and after the purchase - Provision of operating manuals, wiring diagrams, and spare parts - Inspection according to DGUV V3 Technical Data: W x D x H: approx. 1030 x 894 x 1078 mm Power supply: V: 400 / kW: 27 / Hz: 50 Serial number: E21VK23108075642 Year of manufacture: 2023 Condition: Used, inspected, fully functional Features: - iCookingSuite: intelligent cooking assistant with 6 operating modes: meat, fish, vegetables & side dishes, egg dishes, dairy & sweet dishes, soups & sauces; or 5 cooking processes: boiling, roasting, frying, braising, and finishing - iZoneControl: flexible division of the pan base into zones with different temperatures - Low temperature cooking (including overnight), confit, sous-vide - Vario Cooking Control Mode: select desired product result at the touch of a finger (e.g., from light to dark) - Vario Boost: patented heating system for absolutely uniform and precise temperature transfer - Programming mode: create manual programs and manage cooking processes - Integrated WiFi interface, e.g., for connection to ConnectedCooking Guodpfx Aajwwhxiobeh More Details: - Capacity: 100 liters - Integrated 230 V socket - Integrated hand shower with recoil mechanism and adjustable spray - High-quality pan base - Seamless with rounded corners - Core temperature probe with 6 measuring points - 1,200 programs, each programmable and nameable with up to 12 steps - Integrated hose shower on the unit, integrated water drain in the pan - Temperature unit selectable in °C or °F - Tilting cooking pan - Lid with integrated water inlet - Automatic display of service messages - IPX5 water jet protection - USB interface for HACCP data output and updates - Including base frame with plastic feet Functions: - Manual mode (30°C-250°C): set liquid temperature, set pan base temperature, set oil temperature, automatic, liter-accurate water filling, Delta-T cooking - Auto Lift: lifting and lowering device (baskets for boiling and frying). Frying function is locked but can be unlocked. Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Opening hours: 09:00–13:00 and 14:00–17:00.

Year of construction: 2022, condition: used, New: Yes Field of application: Internal logistics Empty weight: 300 kg Part suitable for: machines Type number: 6I6475, 4I7488, 297-9133, 4I7337 CAT313 Track adjuster and recoil Caterpillar Guodexh Adxopfx Aabjh OEM : 6I6475, 4I7488, 297-9133, 4I7337, 297-9142 Article nr.: C042013031N-veiling Track adjuster and recoil Caterpillar

Condition: used, SLITTING LINE GEORG 1500x1.5x25 Price reduced for urgent removal. Available for inspection visit in production until November 20th. Main technical data Coil thickness: 0.24 – 1.5 mm Uncoiler coil weight: 25 Tn Coil width: 230 - 1500 mm Coil outer diameter: Max. 1850 mm Working speed: 200 m/min Slitting tolerance: +/- 0.125 mm Line direction: Right to left Recoiler coil weight: Max. 16 Tn 2 Slitting heads PLC: Siemens S7 1200 Cutting capacity: number of cuts with 350 MPa 24 cuts for thickness 0.25 mm 28 cuts for thickness 0.50 mm 21 cuts for thickness 0.75 mm 18 cuts for thickness 1.00 mm 15 cuts for thickness 1.25 mm 12 cuts for thickness 1.50 mm Scope of supply 1. Coil Carriage 2. Uncoiler 3. Guiding system with 2 measured edges 4. 203.2 diam. Pinch roll before shear 5. Double interlock table 6. Slitting shear: Guodpoxl R A Rjfx Aaboh - Shaft diameter: 275 mm - Blade diameter (new): 400 mm 7. 1 off line quick change slitting head available 8. Scrap press and conveyor 9. Intermediate coil table 10. Loop Pit and covering tables 11. Strips Braking Unit 12. Motorised recoiler with hold down separator arm 13. Unloading Coil Car 14. 4 arms turnstile 15. Electrical cabinets & Control panels 16. Existing tooling 17. Existing documentation Coil thickness: 0.24 – 1.5 mm Uncoiler coil weight: 25 Tn Coil width: 230 - 1500 mm Coil outer diameter: Max. 1800 mm Working speed: 200 m/min Slitting tolerance: +/- 0.125 mm Line direction: Right to left Recoiler coil weight: Max. 16 Tn Slitting heads: 2 PLC: Siemens S7 1200 For thickness 0.25 mm: 24 cuts with 350 MPa For thickness 0.50 mm: 28 cuts with 350 MPa For thickness 0.75 mm: 21 cuts with 350 MPa For thickness 1.00 mm: 18 cuts with 350 MPa For thickness 1.25 mm: 15 cuts with 350 MPa For thickness 1.50 mm: 12 cuts with 350 MPa

Year of construction: 2019, operating hours: 500 h, condition: like new (used), functionality: fully functional, If you request technical details about line can share more details !! Aluminium Coil&Sheet Perforation Machine as feasible for working different Aluminium coil&sheet raw material. This machine lines for desired eact final perforated sheet solution. Aluminium Coil&Sheet Perforating Machine Main Units: – Press Feeding Unit – Stucco Embossing Unit – Punching Unit – Cutting Unit – Stacking Unit – Recoiling Unit – Cut to Length Unit – Automatic Packing Unit GENERAL FEATURES Material : Aluminum and Alloys Max. Coil Weight : 5 Tons Max. Product Thickness : 2,0 mm Gedow Hw T Iopfx Aabouh Min. Product Thickness : 0,4 mm Max. Coil Width : 1000 mm Min. Coil Width : 400 mm Max. Coil Outer Diameter : 1600 mm Min. Coil Outer Diameter : 1000 mm Included Three Round Hole Preforation Tools : 3x5 5x8 10x15

Condition: good (used), Coil reel, decoiler, recoiler Load capacity: 10 tons Expansion range: up to 508 mm internal diameter Expanding mandrel length: 1500 mm Godpfjipx Ufox Aabeuh Several units available Frequency inverter control (FU control) The control cabinet has been newly refurbished. Hydraulic clamping of the coil. The reel can be moved laterally by hand using 4 rollers. Year of manufacture and manufacturer unknown.

Condition: new, functionality: fully functional, Year of construction: 2025, Handheld petrol post driver by CHRISTIE, professional-grade pile driver. Premium brand. Made in Australia. The CHRISTIE handheld petrol post driver, manufactured in Australia, is designed for driving posts and piles, suitable for all types of square or round profiles from 84 mm to even 150 mm in diameter. Please always specify which adapter you need; we will provide the appropriate one. This post driver is used for installing posts for PV panel installations, road barriers, pipes, profiles, road signs, fencing, etc.—ideal for intensive professional applications. Super lightweight yet extremely durable and ergonomic. Years of experience from Australian engineers in pile driving are applied in this best-in-class handheld post driver. Advantages of the CHPD78 model: - Portable: no need for hoses or generators, only 14.5 kg with interchangeable guide parts up to 16 kg. - Ideal for steep or hard-to-access terrain. - Significantly reduced physical effort compared to conventional methods. Gjdpfew Rvvhjx Aabeuh - Can be used all day without causing excessive operator fatigue. - Drives up to 500 posts on a single litre of petrol. - Supplied in a compact plastic case. - Shock-absorbing handles. Please provide information about the profiles, posts, and materials to be driven so we can select the suitable sleeves for you. Technical Specifications: Weight: 14.5 kg Impact energy: 26 Joules Blows per minute: 1720 Power: 1.1 kW (1.3 HP) at 7000 rpm Engine: 4-stroke, overhead camshaft, HONDA GX35, 4T Petrol Accelerator trigger on handle Fuel consumption: 0.71 l/hour Starting system: recoil starter Noise level (hearing protection required): > 100 dB Retail price list – reference drawing for price list positions. All prices are net. Petrol post driver, CHRISTIE CHPD78 model, basic model supplied with Ø 84 mm guide sleeve: 3,300 EUR net 1. Extended handles (60 cm) for gripping the driver: 400 EUR net 2. Aluminium adapter, choice of Ø 100/107 or 150 mm: 190 EUR net Aluminium square adapter 90 mm x 90 mm: 190 EUR net 3. Aluminium reducer for standard Ø 84 mm guide, adapter for posts Ø 10–50 mm: 110 EUR net 4. Teflon reducer for aluminium guide for posts Ø 50–107 mm: 140 EUR net 5. Set of aluminium adapters for aluminium guide for posts Ø 107 mm, plus reducers for Ø 95, 85, and 75 mm: 400 EUR net 6. Wooden transport case with handles: 220 EUR net 7. Service kit with gaskets, spare spark plug: 90 EUR net Items 8, 9, 10 for soil sampling attachments—price on request.

Year of construction: 1993, condition: good (used), COSMEC SM 400 multi-saw - after the technical review - very good condition - Italian production - year of production 1993 TECHNICAL PARAMETERS: cutting width 400 mm cutting height 160 mm engine power 37 kW smoothly adjustable feed speed spindle diameter 55 mm sleeve diameter 70 mm four rows of anti-recoil pawls the three upper pressure rollers table width 710 mm minimum element length 700 mm shaft height adjustment guide ruler laser central lubrication spigot diameter 200 mm dimensions of the machine (length / width / height) 220/190/180 cm Gsdpsgyz Rvsfx Aabeuh weight 1800 kg