Used Trumpf Trubend 5170 for sale (393)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, The machine can be inspected under power until 04.05.2026! TRUMPF TruBend 5170 including BendMaster! The machine has been continuously serviced by TRUMPF and has a complete service record. The cylinders are tight and show no oil leakage. The robot tooling shown in the photos is included. TECHNICAL DETAILS Stroke: 500 mm Press force: 1,700 kN Working length: 4,250 mm Tool clamping: Hydraulic, top and bottom Number of axes: 6 Payload: 60 kg MACHINE DETAILS Codpoy Hqc Nsfx Aa Nsrb Voltage: 3 x 400 V Rated current: 41.0 A Frequency: 50 Hz Connected load: 28.0 kVA Control voltage: 24 V DC Run-down time: max. 90 ms Overrun distance at 220 mm/s: max. 10 mm Overrun distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg EQUIPMENT CE marking Documentation/manual Backgauge with sensors CNC crowning CNC tool shifting BendMaster (robot with 8 m track) Vacuum gripper for sheets (up to 40 kg) CNC regripping station Double sheet detection BendGuard Lasersafe safety system

Condition: excellent (used), Year of construction: 2016, operating hours: 12,730 h, pressing force: 170 t, stroke length: 445 mm, throat depth: 420 mm, overall weight: 12,500 kg, Hydraulic Press Brake Manufacturer: TRUMPF Model: TruBend 5170 Excellent condition, year of manufacture 2016 Codpfx Aaey Hbxns Njrb Technical Specifications - Manufacturer: TRUMPF - Model: TruBend 5170 - Year of manufacture: 2016 - Usable bending length: 3230 mm - Pressing force: 170 t - Weight: 12,200 kg - Connected load: 28 KVA - Free clearance between frames: 2690 mm - Throat depth: 420 mm - Table width: 180 mm - Installation height: 615 mm - Stroke: 445 mm - Upper tool height: 110–390 mm - Closing speed of ram: 220 mm/s - Dimensions (LxWxH): 4250 x 2050 x 3000 mm Equipment: - Controller: TRUMPF TASC 6000, 15" TFT screen - Interfaces: parallel, RS 232, USB, Ethernet - 2 movable support arms - 1 CNC-controlled bending aid incl. parking position on the right - Rear safety enclosure, electrically closable - CNC-controlled crowning - Pneumatic die shifting - Hydraulic tool clamping top and bottom incl. LED lighting at the front - Controlled axes: Y1, Y2, X, X1 R, Z1, Z2 - BendGuard light barrier (for 220 mm/s) - Documentation - 2 upper tool sets (straight & gooseneck) - 5 lower tool sets All specifications are without guarantee. The machine is currently still located at the seller's facility in the Stuttgart area and can be inspected under power by appointment. The company is a very small business that is now closing due to retirement. The main photo has been altered with AI assistance. Complete original images are available upon request.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 4,868 h, pressing force: 173 t, stroke length: 445 mm, overall weight: 12,200 kg, number of axes: 5, This 5-axis TRUMPF TruBend 5170 was manufactured in 2016. It features a maximum press force of 1700 kN and a stroke length of 445 mm, making it suitable for various bending applications. The machine has a weight of 12,200 kg and operates at a maximum pressure of 300 bar. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend 5170 press brake we have for sale. Contact us for further details. • Operating pressure: max. 300 bar • Overrun time: max. 95 ms • Overrun distance: max. 10.0 mm • Safety distance: min. 190.0 mm • Rated current: 40.0 A • Voltage: 3x400 V • Frequency: 50 Hz • Connected load: 28.0 kVA • Control voltage: 24 V • Compressed air connection: 6.0 bar • Machine on time: 13,000 h Cedpfx Asy Egbfsa Njrb • Hydraulic runtime: 5,000 h • Press beam cycles: 41,000 h • Crowning cycles: 15,000 h Additional equipment • Optional: Many tools available • The picture is AI generated. Real pictures on demand Technical Specification Bending Length 3230 mm

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: B1505I0180, functionality: fully functional, operating hours: 6,314 h, input voltage: 400 V, stroke length: 445 mm, operating speed: 1,000 mm/s, reverse speed: 220 mm/s, table height: 1,095 mm, total length: 3,980 mm, total width: 1,900 mm, total height: 3,000 mm, overall weight: 14,150 kg, controller manufacturer: Trumpf, controller model: Touchpoint TruBend, working width: 3,230 mm, bending force (max.): 173 t, control type: CNC control, degree of automation: automatic, back gauge adjustment: CNC-controlled, number of axes: 4, actuation type: hydraulic, Equipment: CE marking, We are offering this Trumpf TruBend 5170 press brake in very good condition, year of manufacture 2018. Manufacturer: Trumpf Model: TruBend 5170 Year of manufacture: 2018 Csdpfx Asyu Sg Rea Njrb Technical condition: very good If you have any questions or need further information, please contact us by message or phone.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 9,874 h, stroke length: 600 mm, throat depth: 420 mm, working width: 4,250 mm, bending force (max.): 173 t, TECHNICAL DETAILS Press force: 1,700 kN Working width: 4,250 mm Cjdpfx Aaex R S S Hj Norb Stroke: 600 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,700 x 3,000 mm Total weight: 16,000 kg Control type: CNC-controlled Press beam operating hours: 9,874 h EQUIPMENT 5-axis backgauge Hydraulic tool clamping (top/bottom) Die adjustment for bending CNC-controlled bending aid Bendguard safety system ACB angle measurement sensor Note: The machine is sold without tooling.

Condition: excellent (used), Year of construction: 2007, Operating hours: 100,050 h Press force: 850 kN Stroke: 445 mm Cjdpfeyyyfaex Aa Njrb Operating pressure: 300 bar Overrun time: 95 ms Overrun distance at 220 mm/s: 10 mm Overrun distance at 160 mm/s: 8.5 mm Safety distance: 190 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Options: ACB, BendGuard for manual bending, HQ version, interface to 2nd machine Crsdpfx Aewykccsa Nsb

Year of construction: 2010, condition: like new (used), Used Trumpf Trubend Series 3000 CNC pressbrake for sale VIDEO BELOW: Used Trumpf Trubend 3120 for sale 3metre x 120ton 6 axis plus pressbrake for sale. Brand/make: TRUMPF Model: TRUBEND 3120 Type: CNC hydraulic Press Brakes New 2010 Location: United kingdom Low hours – 14,000 Specification Convert Specs to Imperial Tonnage 119.749 t / 120ton Type: hydraulic downstroke Overall Length 3.1 m /3metre BH 2.7 m Stroke 199.9 mm Number of axis: 7 axis 5 axis back gauge Weight 18298 (LBS) Control CNC (T3000) 132 Ton X 10′ Trumpf TruBend 3120 CNC Press Brake Year: 2010 Csdpohtm Ikofx Aa Nsrb Specification from new: Machine – Stable machine frame as welded all-steel construction – Ram, highly resistant to torsional forces – Spherical ram suspension, with ram tilt – Electro-hydraulic downstroking drive with 4-cylinder technology – Proportional valve technology – Modern block hydraulics – Electronic pressure balance – Measuring system with glass scale and frame deflection compensation – Hydraulic oil filled in the machine (lifetime lubrication) – Oil cooler Backgauge System – Backgauge system 2-axes with rack and pinion-drive for X- and R-axis, – 2 pieces back gauge fingers with safe adjustment in front of the machine Tool Holder – TRUMPF Upper tool clamping, manual and hardened – Lower tool clamping, manual and hardened Crowning – Self-regulating crowning system – Additional hydraulic CNC-crowning Control – Machine control: T3000 colour, DELEM based on Real Time for Windows – USB interfaces for keyboard, mouse, etc. Safety – Footswitch for Emergency up, down and emergency stop – Safety equipment: Side doors and manual shutter roller at the rear Services – Installation, start-up and instruction Options for Backgauge System – Back gauge system 5 axis Options for Tool Holder – Amada US Style fast clamping of upper tool holders (segmented, on entire working length) Options for Safety Device – BendGuard Options for Material Handling – Support bracket (2 pc) Delivery – June 2011 Video below: Used Trumpf V and C series cnc pressbrakes also available in stock for sale. We are always interested in buying used Trumpf pressbrakes and machines such as: TruBend 3066 TruBend 3100 TruBend 3170 TruBend Series 5000 TruBend 5085 Trubend 5130 TruBend Series 7000 TruBend 7050 TruBend 7036 TruBend 7050 TruBend Series 8000 TruBend 8230 Trubend 8400

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: B0508A0463, TRUMPF TruBend Cell 5000 – Robotic Bending Cell | Year 2015 Press brake: TruBend 5230 Robotic bending system: BendMaster Control system: TASC 6000 (robot and press brake programmed via the machine interface) Press brake specifications: Pressing force: 230 tons Bending length: 4,250 mm Year of manufacture: 02.2015 Serial number: B0508A0463 Operating hours: Machine operating time: 33,789.3 h Cedjw Eilyspfx Aa Nsrb Hydraulic system: 8,528.8 h Press beam time: 1,119.9 h Description: Fully automated bending solution – the TruBend Cell 5000 is designed for high-volume, precision production. The integrated robot enables efficient bending with minimal operator intervention. Condition: Very good, regularly maintained Dismantling, loading, and transport can be arranged.

Condition: good (used), Year of construction: 2008, machine/vehicle number: B0702A0036, functionality: fully functional, stroke length: 110 mm, total length: 1,600 mm, total width: 1,300 mm, total height: 2,300 mm, overall weight: 2,600 kg, controller manufacturer: TRUMPF, TRUMPF TRUBEND 7036 Electromechanical Press Brake - Operating voltage: 3 x 400 V - Frequency: 50 Hz - Rated current: 8.7 A - Connection rating: 6.0 kVA - Press force: max. 360 kN - Stroke: max. 110 mm - Overrun time: max. 90 ms - Overrun distance at 220 mm/s: max. 12 mm - Safety distance: min. 180 mm Credpfx Asy H Ei Rea Nsb - Control: TRUMPF - Includes: selection of various press brake tools in different sizes - Machine hours: see photos Attention: The item must be collected definitively between 15.06. and 25.06.2026 on a date to be arranged. FCA D-95126 Schwarzenbach an der Saale – loaded onto truck

Condition: used, Year of construction: 2011, pressure 36 t chamfer lenght 1020 mm distance between columns 932 mm throat 150 mm stroke 120 mm useable dayligth 295 mm Cedpjy Ig Rrefx Aa Norb Y-working travel 10/25 mm/sec Y-rapid travel 220 mm/sec work height max. 1150 mm weight of the machine ca. 2.600 kg dimensions of the machine ca. 1805x1330x2380 mm

Condition: good (used), Year of construction: 2011, functionality: fully functional, Press force: 36 t Crodpfx Aey Igbdoa Nsb Bending length: 1020 mm Distance between uprights: 932 mm Throat depth: 150 mm Stroke: 120 mm Usable installation height: 295 mm Y-axis working speed: 10/25 mm/sec Y-axis rapid traverse: 220 mm/sec Working height: 1150 mm Machine weight approx.: 2,600 kg Space requirement approx.: 1805x1330x2380 mm Accessories: - Light barrier - Foot switch - Side safety doors - Wila tool clamp - Trumpf TASC 6000 control - 6-axis backgauge

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Press force: 36 t Bending length: 1020 mm Clearance between frames: 932 mm Throat depth: 150 mm Stroke: 120 mm Usable installation height: 295 mm Csdpfxeyz Rwij Aa Nsrb Y-working speed: 10/25 mm/sec Y-rapid traverse: 220 mm/sec Working height: 1150 mm Machine weight approx.: 2,600 kg Space requirement approx.: 1805x1330x2380 mm Operating hours: 3,297 h

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 42,200 h, pressing force: 130 t, table width: 3,230 mm, clearance between the columns: 2,650 mm, total length: 3,980 mm, total width: 1,900 mm, total height: 2,840 mm, overall weight: 11,200 kg, control type: CNC control, Hello, We are selling Trumpf TruBend 5130 CNC press brake, tooling included.. 130t/3meter CNC bending machine, 4-axis back gauge, Credpfsy Nd I Rex Aa Nsb CNC crowning, TASC 6000, Willa hydraulic clamping, Tooling included, priced aprox. 10000€ Lower die 16mm - 3m - sectionized for 30° 50mm - 3m - sectionized 80mm - 515mm Upper Tool finer height 200mm, radius of 1mm, for 30° - 3m - sectionized, for thicker plates height 20mm, radius 3mm - 600mm - sectionized Feel free to contact.

Condition: used, Year of construction: 2011, machine/vehicle number: B0702A0651, functionality: fully functional, operating hours: 30,858 h, input voltage: 380 V, input frequency: 60 Hz, type of input current: three-phase, pressing force: 36 t, operating speed: 220 mm/s, table length: 1,000 mm, overall weight: 2,600 kg, year of last overhaul: 2011, Equipment: CE marking, safety light barrier, The equipment has been fully maintained and is ready for immediate operation. The equipment has been in operation for 30,858 hours, and there are no operational issues (line laser not working). If you wish to use the line laser, it can be repaired for an additional fee. The cost is approximately 600 EUR. - Press beam OK - Block laser OK - Illumination (auto) OK Codpfoyytuhex Aa Nerb - Line laser Not OK I would prefer the buyer to be familiar with the TruBend7036. If purchased in South Korea, I can provide free operator training.

Condition: like new (used), Year of construction: 2008, machine/vehicle number: B0502A0308, functionality: fully functional, operating hours: 1,520 h, pressing force: 85 t, overall weight: 7,800 kg, controller manufacturer: KEBA, controller model: TASC 6000, control type: CNC control, Equipment: CE marking, documentation/manual, For sale: used TRUMPF TruBend 5085X press brake, year of manufacture 2008. The machine is in exceptional technical condition – LIKE NEW! In January 2026, TRUMPF Poland service replaced all filters and oil, performed calibration, checked operational accuracy, and conducted safety tests. The machine has a low number of operating hours – only 1512 hydraulic hours! Hydraulics: Hoerbiger Year of manufacture: 2008 Maximum press force: 850 kN Working length: 2210 mm Power: 17 kW Voltage: 400 V Hydraulic oil tank capacity: 120 l Crsdpfoy Hpnqox Aa Nob Hydraulic system pressure: 300 bar Weight: 7800 kg Tool type: hydraulic Wila / Trumpf Control: TASC 6000 Increased installation height 5-axis backgauge – X, X5, R, Z1, Z2 Hydraulic upper tool clamping WILA Hydraulic lower tool clamping WILA CNC crowning BendGuard Prepared for ACB If you have any questions or need additional information, please send us a message or call us.

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 26,000 kg, Trumpf TruBend Center 5030 Cjdpfx Aey E N Hkja Norb

Condition: like new (used), Year of construction: 2017, functionality: fully functional, operating hours: 4,500 h, stroke length: 200 mm, Hydraulic Press Brake Manufacturer: TRUMPF Model: TruBend 3066 B26 Year: 2017 As new, only 4,500 operating hours! Technical Data Manufacturer: TRUMPF Model: TruBend 3066 Year of manufacture: 2017 (B26) Bending length: 2040 mm Pressing force: 66 t Operating hours: 4,500h (read off) Clear distance between uprights: 2364 mm Throat depth: 400 mm Drive power: 17 kW Stroke: 200 mm Y-axis rapid traverse speed: max. 200 mm/s Y-axis working speed: max. 15 mm/s Dimensions: L 2587 x W 1644 x H 2370 mm Weight: 5650 kg Equipment Csdpfsyz Smfex Aa Nerb - Electro-hydraulic top-drive - Block hydraulic system - Controlled axes: Y1, Y2, X, R - 3 backgauge fingers - TRUMPF upper and lower tool clamping system - Self-regulating crowning system - Control: Delem T3500T multi-touch control - Front light barrier BendGuard - Integrated TRUMPF technology data - Foot pedal - Tooling as per photo All information without guarantee. Machine demonstration under power is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2008, Trumpf TruBend 5085 Manufacturer: TRUMPF Model: TruBend 5085 Year of manufacture: 2008 Product number: F1025K Serial number: B0503A0302 Maximum press force: 85 tons Stroke: 540 mm Clearance: 445 mm Weight: 8,600 kg Bending length: 2,720 mm Codjyxdv Hepfx Aa Njrb

Condition: used, Year of construction: 2018, controller model: , _____ Description: Year of manuf. : 2018 Control : Technical data Year of manufacture:2018 Pressing force approx.:3200 kN Folding length approx.:4420 mm Control system:TASC 6000 Projection:420 mm Free upright clearance approx.:3680 mm Usable installation height approx.:615 mm Machine weight approx.:23400 kg Equipment :- Sturdy machine frame :- Press beam, stress relieved with high bending strength :- Spherical bearing of the press beam (inclined position) :- Electro-hydraulic top drive with 4-cylinder technology :- Optical set-up and positioning aid :- Generous edge clearance :- Flat front covers :- Block hydraulics :- Electronic pressure compensator :- Measuring system with glass scale and deflection compensation :- Hydraulic oil in the machine (lifetime lubrication) :- Oil cooler :- Control cabinet cooling via air-to-air heat exchanger :- Modern machine design Extended equipment :- 6-axis backgauge system :- Hydraulic upper tool clamping :- CNC crowning :- Work area lighting front and rear BendMaster (150) :- Sturdy base body and manipulator in cast aluminium construction :- Load capacity 150 kg, plate plus gripper :- Low floor track in welded construction :- Sheet sensor for contour detection :- Rotary feed-through for easy gripper change :- Gripper coupling on BendMaster Codpfx Aajyy Hgqs Njrb :- Sensors for 4-axis backgauge system :- Electric drives :- Double sheet detection :- Regripping station NC :- Vacuum generation for suction gripper :- Platform (300 mm) for the bending press Extended BendMaster equipment :Extended BendMaster equipment - Track extension to 12 m :- Sensor system for 6-axis back gauge :- Gripper changing console :- Vacuum gripper, undefined :- Modular vacuum gripper with separation (material for 3 grippers) :- Gripper coupling :- Tong gripper :- Sheet removal station with linear axis :- Side door on right for safety fence

Condition: like new (used), Year of construction: 2017, functionality: fully functional, operating hours: 9,000 h, stroke length: 350 mm, overall weight: 8,300 kg, working width: 3,100 mm, bending force (max.): 100 t, Equipment: CE marking, A ready-to-use TRUMPF TruBend 3100 press brake from 2017, in like-new condition. This powerful and reliable machine is ideal for professional sheet metal work, delivering excellent precision and performance. The machine features a maximum press force of 100 tons and is equipped with an advanced control system with graphical visualization. It has only 9,000 operating hours on the clock. Extra benefit: upon purchase, we offer one week of training at our facility, ensuring you can start working immediately and efficiently. Key specifications (2017 model): - Press force: 1,000 kN - Bending length: 3,060 mm - Distance between uprights: 3,384 mm - Usable installation height (+extra option): 500 mm - Controlled axes: standard 4 axes (Y1, Y2, X, R) - Backgauge system: fast and precise CNC backgauge - Control system: TRUMPF T3500T with 3D color/graphical visualization Main options and features: - Increased installation height: provides a 500 mm opening for complex/tall components - Tool clamps: hydraulic tool clamping systems for rapid setup - Bending aids: maximum two height-adjustable bending aids (lifting capacity up to 150 kg) for handling large parts - Safety system: BendGuard automatic laser field monitoring - LED lighting: LED work area lighting in front and rear - Software: DXF import for 2D programming We also provide the machine's maintenance history and an overview of replaced parts, such as the BendGuard. The last maintenance was carried out in August 2025. Crjdpfeybax Uox Aa Nsb For further information or any questions, feel free to contact us.

Year of construction: 2013, operating hours: 14,572 h, condition: ready for operation (used), General Data Machine weight 13200 kg Measurements height 2330 mm Control Unit Brand DELEM Model T3000 Main Drive Number of axis 6 Bending length 4140 mm Pressing force 1800 Kn Dimensions Machine Length 4610 mm Movement X-Axis Movement 600 mm Cedpfxox D E N As Aa Nerb Y-Axis Movement 20 mm This 6-axis TRUMPF TRUBEND 3180 hydraulic press was manufactured in 2013. It features a bending capacity of 1800 kN and a bending length of 4140 mm. The machine includes a CNC control Delem T3000, a quick clamp system, and a 4-axis CNC backgauge with X, R, Z1, Z2. It operates on 400 V with a power consumption of 18.5 kW. Consider the opportunity to buy this TRUMPF TRUBEND 3180 hydraulic press. Contact us for more information about this machine. Application Types Bending

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, operating hours: 26,732 h, operating speed: 220 mm/s, throat depth: 150 mm, total length: 1,900 mm, overall weight: 2,600 kg, controller manufacturer: TRUMPF, controller model: TASC 6000, working width: 1,020 mm, bending force (max.): 36 t, control type: CNC control, degree of automation: semi-automatic, number of axes: 6, type of crowning: CNC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, european tool clamping system, finger protection, The TruBend 7036 is designed to maximize productivity and is especially suitable for industries requiring flexible, precise, and fast bending of small sheet metal components, such as electronics, automotive, and precision engineering. Its ergonomic design minimizes operator fatigue and improves safety and efficiency. Cjdpfx Aew D Uwxea Njrb

Condition: good (used), Year of construction: 2007, functionality: fully functional, bending force (max.): 85 t, installation height: 615 mm, number of axes: 6, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm]: 2210 Pressing force [tons]: 85 Controller: TRUMPF TASC 6000 Operating hours [h]: 90816 Hydraulics ON [h]: 57234 Standard Equipment: - Rigid machine frame in all-steel construction Credjytfrwopfx Aa Njb - Stress-relieved press beam - 4-cylinder upper drive - Block hydraulics with quiet double pump - Backgauge with CNC-controlled X and R axes - Manual upper tool clamping - Hydraulic lower tool clamping - Manual crowning - Control cabinet cooling via air-to-air heat exchanger - Network connection for machine control - Standard safety features + Increased installation height/stroke +230 mm + 6-axis backgauge system + Hydraulic upper tool clamping + CNC-controlled crowning + BendGuard + 2x support consoles + Short park position (190 mm) + Rear work area lighting + Front work area lighting

Condition: good (used), Year of construction: 2010, functionality: fully functional, bending force (max.): 85 t, installation height: 615 mm, number of axes: 6, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 2720 Press force [t] 85 Control unit TRUMPF TASC 6000 Operating hours [h] 45666 Hydraulics on [h] 13762 - Top drive concept in four-cylinder design Y1/Y2 - Electrohydraulic ram drive with proportional valve technology - Ram position measuring system with deflection compensation via glass scales - Modern block-type hydraulics - Spherical suspension and inclined position of the pressure beam - CNC backgauge system - Safe finger adjustment from the front - 2 stop fingers - Self-centering, manual, hardened upper tool holder for vertical tool change - Hardened, manual lower tool clamping - Program-controlled lower tool displacement (I-axis) for 2 positions - Flat front cover - Modern safety guard Cedpfeytfqmjx Aa Norb - CE mark - Oil cooler clamping device - Increased installation height - 6-axis backgauge - Hydraulic upper tool clamping - Hydraulic lower tool clamping - CNC crowning - CNC I-axis - BendGuard - ACB preparation - 2 support consoles