Used Reflective Densitometer for sale (426)

Condition: good (used), functionality: fully functional, MAPELLI 3-bag sawdust extractor 11 kW Specification: • Condition – used, serviced Ihjdpfjw U D Itex Abcew • Manufacturer – MAPELLI • Turbine motor power – 11 kW • Turbine diameter – 70 cm • Bag shaking mechanism with control cabinet • Turbine inlet – 420 mm diameter • Filter area: 18 filter bags 25x160 cm • Airtight body with warm air return • Pipes and chimney from the photos included • Collection bag diameter – 3 x 600 mm • Overall dimensions – 395/290 x 105 x 380 cm (length/length without turbine x width x height) • Transport height – 280 cm + skids Additional information: • Good original technical condition • Photos reflect the actual condition of the item for sale • Possibility to power up and test the machine on site

Condition: ready for operation (used), functionality: fully functional, Thickness planer SAC RS53, 4 knives Specification: • Condition – used, after inspection • Working width – 530 mm • Working height – 240 mm • Motor power – 4.0 kW • 4-knife cutterhead for traditional knives • Analog thickness indicator • 2 feed speeds • Full, straight infeed roller before the cutterhead • Two steel outfeed rollers after the cutterhead • Slip roller in the lower table • Manual height adjustment (up/down) • Table supported by a single solid piston • Original paintwork • Outlet for chip extraction, diameter 145 mm • Weight approx. 800 kg • Overall dimensions: 95 x 100 x 105 cm (L x W x H) Additional information: • The photos shown reflect the actual condition of the item for sale • Possible to power on and test the machine on site. Ihodpfx Aoxdxk Tjbcew

Condition: excellent (used), functionality: fully functional, mileage: 9,85,000 km, first registration: 11/2019, fuel type: diesel, axle configuration: 4x2, fuel: diesel, driver cabin: sleeper cab, emission class: euro6, number of beds: 2, Year of construction: 2019, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, additional headlights, air conditioning, airbag, blind spot assist, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, full service history, hill-start assist, lane keeping assist, navigation system, non-smoking vehicle, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, soot filter, spoiler, tachograph, tire pressure monitoring, traction control, Single-owner vehicle, always and exclusively serviced by official DAF workshops, with invoices and complete certified documentation available. Equipment: SSC cab, hydraulic system, retarder, independent air conditioning, alloy wheels, leather interior, stainless steel components, air horns, refrigerator, full aerodynamic kit, TV, metallic paint. Ihjdpfxeypb H Nj Abcjw High-roof cab, power take-off/hydraulic system, standard operational accessories. MAINTENANCE CARRIED OUT REGULARLY. CERTIFIED AND GUARANTEED MILEAGE. Leasing and/or financing options available for up to 60 installments with the best rates on the market. This description may inadvertently contain discrepancies compared to actual features, which should be verified on site. In any case, this listing does not constitute a contractual commitment. For more information or clarification, please call the indicated numbers, also available via direct WhatsApp. Mr. Paolo Antonio Gorgoni Photo sets are taken on our premises; all photos are genuine and reflect the current condition of the vehicle. Please also note that the system automatically enters standard equipment and options, so discrepancies may occasionally occur. To ensure maximum accuracy, we invite you to always verify features directly with us.

Condition: excellent (used), functionality: fully functional, ZANGHERI&BOSCHETTI FM 29 S Multispindle Boring Machine – well-maintained, ready for operation Specification: • Technical condition: used, after professional inspection and complete set of seals replaced • Manufacturer: ZANGHERI&BOSCHETTI (under SCM license) • Model: FS 29 S • 29 drill bits • Left/right drilling spindles • 90 cm between outermost drill bits • Can operate in vertical, horizontal or any other angle within a 0–90° range • 3 pneumatic clamps • Pneumatic movement of the drilling head • Adjustable drilling depth • Original paintwork • Complete set of guides included • Table size: 120 x 70 cm • Weight: approx. 500 kg • Overall dimensions: 110 x 210 x 140 cm (L x W x H) Ihedoymll Djpfx Abcjw Additional information: • The machine is in very good technical condition, ready for immediate operation • The photos shown reflect the actual condition of the item for sale • Device can be connected and tested on site • The auction price does not include VAT or transportation costs Financing and transport: • We organize transport via MDD fleet, courier companies, or external carriers • Financial support available in the form of leasing or lease loans

Condition: used, mileage: 1,08,471 km, power: 62 kW (84.30 HP), first registration: 05/2010, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, next inspection (TÜV): 05/2024, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, Year of construction: 2010, construction height: 1,970 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, The Volkswagen T5 Transporter 2.0 TDI, year of manufacture 2010, is a used panel van in sunflower yellow. It features a robust 2.0-litre diesel engine with 62 kW (84 hp) of power and complies with the Euro 5 emissions standard. The manual 5-speed gearbox ensures reliable performance. The vehicle has covered 108,471 km and offers seating for three occupants with a total of five doors, including two sliding doors on both sides. With a length of 4,892 mm, a width of 1,904 mm, and a height of 1,970 mm, the Transporter is ideal for a wide range of applications. The permissible gross vehicle weight is 2,800 kg. The average fuel consumption is 7.2 l/100 km. Practical features include truck registration and a wooden rear floor in the cargo area. The T5 has a general inspection (Hauptuntersuchung) valid until May 2024 and is immediately ready for operation. The vehicle's condition is used, appropriate for its age, but it has been well maintained, as reflected by its optical and technical state. Viewings are possible at any time during regular business hours. Ihsdpfx Aex Nzqpsbcow Sale is exclusive to tradespeople (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: used, mileage: 1,38,133 km, power: 62 kW (84.30 HP), first registration: 10/2014, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, next inspection (TÜV): 10/2024, fuel: diesel, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, total length: 4,892 mm, Year of construction: 2014, construction height: 1,970 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, soot filter, Engine failure. The Volkswagen T5 Transporter 2.0 TDI COC is a used commercial vehicle characterized by its robust construction and versatility. It was first registered in October 2014 and has a mileage of 138,133 km to date. It is powered by a 2.0-liter diesel engine with an output of 62 kW (84 hp) and complies with the Euro 5 emissions standard. The vehicle's environmental sticker is green (4), which allows it to be used in many urban environmental zones. The model features a manual transmission and offers four doors, including two sliding doors on the left and right sides, for easy access. With a gross vehicle weight of 2,800 kg, it is ideal for transporting various loads. The T5 Transporter has a truck registration and is painted in yellow metallic paint, making it highly visible. The interior is functionally designed, with a wooden panel in the cargo area for additional protection and durability. Ihsdpfx Abov Htucecjw The vehicle has a MOT valid until October 2024 and is in used condition, which is reflected in the price, which varies depending on mileage, year of manufacture, and cosmetic condition. Delivery and registration services are available for an additional charge. Viewings can be arranged without prior appointment so you can see the condition for yourself. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: used, This listing is for the Stuart Scientific SM1 Magnetic Stirrer The unit is not at it's best aesthetically and that is reflected in our pricing, it is however in full working condition and is ready for immediate release. The Stuart Scientific SM1 Magnetic Stirrer is a laboratory bench-top device designed to mix liquids uniformly using a rotating magnetic field. It’s a basic analogue magnetic stirrer often found in educational, research, and routine laboratory settings for mixing solutions, suspensions, or samples without heating The SM1 is suitable for everyday laboratory mixing tasks such as: Mixing aqueous solutions, buffers, and reagents. Suspension of particulates or cells. Ijdpfx Ajx Npnvsbcjhw Routine solution preparation and titration support. Because it lacks a heating element, it’s ideal where temperature control isn’t needed, or when stirring only is required (e.g., during dissolving solids into liquids).

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Caterpillar C32, General information Field of application: Construction Weights Empty weight: 7.436 kg Functional Generator capacity: 1.500 kVA Ihjdpfx Asx Hddtsbcow CE mark: yes Other information Fuel consumption: 232.8 Liter/Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Control Panel Water tank volume: 1000 l Transport dimensions (LxWxH): 4,175x2,095x2,268 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information RATING TYPE STANDBY: Output available with varying load for the duration of the interruption of the normal source power. Average power output is 70% of the standby power rating. Typical operation is 200 hours per year, with maximum expected usage of 500 hours per year. *Images shown might not reflect actual configuration.

Condition: used, Year of construction: 2008, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 7BCR250, type of input current: DC, input voltage: 220 V, measuring range X-axis: 200 mm, measuring range Y-axis: 80 mm, measuring range Z-axis: 100 mm, bolt circle diameter: 350 mm, total width: 750 mm, total length: 460 mm, total height: 1,100 mm, overall weight: 115 kg, repeat accuracy: 0.01 mm, input frequency: 50 Hz, The Helios 350‑V is a high-precision profile projector designed to meet the demands of metrology laboratories, machine shops, and quality control departments. Manufactured in Italy by LTF S.p.A., it combines advanced optical engineering, mechanical robustness, and user-friendly operation, making it an essential tool for reliably measuring small and medium-sized parts. Its industrial-grade optical system delivers a sharp, stable image, ideal for inspecting contours, radii, angles, and complex geometries in a non-contact manner. The high-contrast illuminated screen enables profile viewing with excellent clarity, supporting comparison with templates, grids, or digital measurements. The Helios 350‑V features a smooth and stable stage, purpose-built for repetitive measurements with tight tolerances. It comes equipped with a digital readout system for console-based alignment and measurement (Quadra Check 2000). Its illumination system ensures uniform projection, even on parts with complex geometries or low-reflectivity materials. Constructed from high-grade materials with a rigid framework, it guarantees dimensional stability and long service life, even in demanding industrial environments. Ihjdsyuv Thepfx Abcew

Year of construction: 2024, operating hours: 960 h, condition: used, functionality: fully functional, Crusher and Screening Machine Year of manufacture: 2024 Location: 54611 Hallschlag Application: Designed for the reduction of charcoal undersize material, followed by screening and filling into big bags or, alternatively, pneumatic conveying into silos. The smooth roller mill was originally used for the size reduction of clay. These machines offer a wide range of applications and are capable of handling and processing various materials. Plant components: 1. Screw conveyor 1 2. Screw conveyor 2 3. Screw conveyor 3 4. Crusher (smooth roller mill) and steel frame 5. Tumbler screen and steel frame 6. Elevator 1-3 7. Pneumatic conveyor vessel (“sand sender”) 8. Big bag unloading station 9. Piping for extraction/ventilation 10. Electrical/electronic systems in a container The prices listed in the document reflect our acquisition costs. Individual or complete purchase of components is possible. Prices and further technical details available on request. Iodpfx Aboytdgaecehw

Condition: used, mileage: 86,125 km, power: 70 kW (95.17 HP), first registration: 08/2012, fuel type: diesel, empty load weight: 2,570 kg, maximum load weight: 930 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, next inspection (TÜV): 07/2026, fuel: diesel, CO₂ emissions: 259 g/km, fuel consumption (urban): 11.1 l/100km, fuel consumption (extra-urban): 9.2 l/100km, fuel consumption (combined): 9.8 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, loading space length: 4,380 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2012, construction height: 2,700 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, This used Mercedes-Benz Sprinter 310 CDI Maxi is a reliable box van, manufactured in 2012 and compliant with Euro 5 emissions standards. The Sprinter features an impressive mileage of 86,125 km and offers ample loading options thanks to in-vehicle shelving units. Equipped with a 2,143 cc diesel engine, it delivers 70 kW (95 hp) and is paired with an automatic transmission and rear-wheel drive. With an environmentally friendly green emissions sticker (pollutant class 4), this van operates efficiently both within city limits and on highways, boasting a combined fuel consumption of 9.8 l/100 km and CO2 emissions of 259 g/km. Practical for business users, the maximum payload capacity is rated at 3,500 kg. The vehicle’s previous owner maintained it with care, as reflected in its excellent condition. On-site inspections are uncomplicated and possible without an appointment, with multilingual advice available. Experience the robust design and functionality of this Mercedes-Benz Sprinter for yourself. Sale exclusively to business customers (agriculture, freelancers, small and large businesses) or for export. Subject to prior sale and errors excepted. Ihodjxw Innspfx Abcjw

Condition: used, mileage: 1,30,159 km, power: 70 kW (95.17 HP), first registration: 05/2011, fuel type: diesel, empty load weight: 2,550 kg, maximum load weight: 950 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, next inspection (TÜV): 06/2023, fuel: diesel, CO₂ emissions: 259 g/km, fuel consumption (urban): 11.1 l/100km, fuel consumption (extra-urban): 9.2 l/100km, fuel consumption (combined): 9.8 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, loading space length: 4,380 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2011, construction height: 2,690 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, The Mercedes-Benz Sprinter 310 CDI Maxi from 2011 is equipped with an economical 2.1-liter diesel engine with 70 kW output. It meets the Euro 5 emissions standard and has a mileage of 130,159 km. The van offers an automatic transmission and rear-wheel drive. The exterior appearance in striking yellow paint, combined with a robust metallic finish, makes it a practical commercial vehicle for a wide range of professional requirements. With a spacious design, the Sprinter has a length of 7,057 mm, a width of 2,100 mm and a height of 2,694 mm, which is reflected in a generous interior. Additional equipment such as electrically adjustable and heated exterior mirrors, adaptive brake lights and hill start assist ensure increased comfort and safety. Registration as a truck and various loading options make the vehicle ideal for commercial use. The vehicle is in a used but well-maintained condition and has a class 4 environmental badge. It has sufficient payload capacity with a maximum total weight of 3,500 kg. The combined fuel consumption is 9.8 l/100 km with CO2 emissions of 259 g/km. The Sprinter is only for sale to businesses or for export, with the option of viewing without registration. Special equipment: Start-up aid (hill start assist), 1-pole battery isolator, 220 A generator, steering wheel (steering column mechanically adjustable), metallic paint, radio preparation, front mud flaps, rear stabilizer, reinforced front stabilizer, fleece battery 95 Ah Additional equipment: Adaptive brake light, driver's side airbag, washer fluid level indicator, electric outside mirror. adjustable and heated, both, outside mirrors with integrated indicator light, battery 74 Ah, brake assistant, brake system with ABS+ASR, roof panel in the driver's cab, lockable glove compartment, Body/structure: flatbed, fuel tank: main tank 75 litres, headlight range control, truck registration, engine 2.1 litres - 70 kW CDI, wheelbase 4325 mm, smoker's package, tire repair kit with compressor, low emissions according to Euro 5 emissions standard, seat belt system with warning system (driver's side), seat cover / upholstery: Lima fabric, Iedpfx Abjtd U Rfjcohw steel rims 6.5x16, maintenance interval display Assyst, heat-insulating glazing, permissible. Total weight 3.50 t &#8226, Equipment was determined using a VIN query, errors can occur here for technical reasons Only sold to businesses (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale.

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: M166011 01 G21C, The LineLazer V 250SPS model with paint guns is a self-propelled solvent painting machine with reflective beads designed for large and heavy striping jobs, including painting parking lots and roadways. Pressurised bead system:  Excellent bead application performance  Ensures proper flow of beads Automatic paint gun system  Quality solenoid driven system Remote control control box  Easy to use and highly visible in all conditions 25 gallon paint tank  Less refills  Extended stripping time with high capacity hopper Honda® GX engine  Reliable and easy to start  Oil alarm stops engine to prevent damage if oil level drops too low Electric start Ihsdpfx Abot Dlmbecew  Quick start EasyMark gun adjustment system  Easy gun adjustments  Easy gun adjustment every time  2 gun capability with QuikSelect gun selector Use of front or rear holster Self-centering front wheel  Simple operation  Foam-filled, three-wheel design for stability Additional features  Easy steering adjustment  Durable Chromex pump  High efficiency hydraulic motor  High capacity cooling system  Easy Out pump filter

Condition: good (used), functionality: fully functional, Wide Belt Sander CB 1300 R+RR Specification: • Condition – used, after comprehensive inspection and calibration • Manufacturer – CB • Model – 2NRKRR13002N • Working width – 1300 mm • 2 sanding units: - First: calibration roller, made of hard rubber – diameter 230 mm - Second unit: 2 rollers, hard and soft, each with independent adjustment, diameter 160 mm each • Main motors: 2 x 9.2 kW • Two conveyor feed speeds • Electronic indicator for workpiece thickness • Photoelectric sensor-controlled oscillation • Infeed/outfeed extension rollers • Electric up/down adjustment • Thickness gauge for sanded material • Safety sensor to prevent oversized material entry Ijdew U D Duspfx Abcjhw • Original paintwork • Sanding belt size – 1340 x 2200 mm • Extraction ports – 3 x 180 mm • Weight approx. 2200 kg • Machine from the early 1990s • Dimensions: 200 x 220 x 210 cm (L x W x H) Additional Information: • Excellent original technical and visual condition • Photos shown reflect the actual condition of the item for sale • On-site power-up and inspection possible

Year of construction: 2015, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1509012, For sale is a used temperature calibrator from the manufacturer Sika based in Kaufungen, Germany (Made in Germany). The device was only used as a micro bath/oil bath in our calibration laboratory and is no longer needed. Iodpfxsyrb Hhj Abcshw No additional accessories are included; however, these can be purchased from the manufacturer. (Other measuring equipment shown in the pictures is not included in the offer.) Temperature range: -30°C to 165°C Manufacturer specifications: Description: Whether for on-site use in the workshop, in the measurement and test room, or in the laboratory, SIKA temperature calibrators are utilized anywhere. A wide range of industries with diverse applications are covered. • Assembly, commissioning • Manufacturing, production • Maintenance, service • Quality assurance, test equipment monitoring • Repair Micro bath function: When temperature sensors with unusual shapes and sizes need to be tested, using calibration fluids offers advantages. The unit under test is placed directly in the fluid, ensuring a direct heat transfer between calibrator and device without insulating air gaps. The calibration fluid, such as silicone oil, is selected according to the required calibration temperature. The stepless regulation of the magnetic stirrer, combined with the removable sensor basket, ensures thorough mixing of the calibration liquid and creates a large measurement zone. Furthermore, the sensor basket allows undisturbed stirring operation and protects the tank bottom. Dry block function: The dry block function is designed to allow simple temperature calibration in laboratory and field applications. Optimal thermal coupling between the block and the device under test is achieved using the correct sleeve. Ideally, the bore in the sleeve should be 0.5 mm larger in diameter than the outside diameter of the sensor. The sleeve enables calibration of almost all straight temperature sensors with different lengths and diameters. The dry block covers the entire temperature range without the need to change the calibration medium. The user does not have to consider viscosities, flash points, or outgassing. Blackbody function: For the calibration of IR pyrometers or thermal imaging cameras, a patented infrared calibration sleeve is used. The special surface structure and asymmetric shapes create a “black cavity radiator” with an emissivity factor of 0.9994, preventing the reflection of stray radiation and emitting the desired temperature in an ideal manner. The pyrometer is simply held at the prescribed distance above the measurement opening, allowing the desired measurement spot on the base to be targeted for calibration. Direct mounting of a tripod is possible. Surface temperature function: Surface temperature sensors are calibrated using special sleeves that are placed vertically with the required contact force. By switching the calibrator controller to the external reference sensor, the best possible temperature reference point on the sleeve surface is achieved.

Condition: new, machine/vehicle number: 11650640, empty load weight: 1,150 kg, maximum load weight: 2,350 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,340 mm, loading space width: 1,780 mm, loading space height: 2,130 mm, suspension: steel, Year of construction: 2026, Livestock Trailer TA510 by Ifor Williams: The Perfect Solution for Animal Transport The livestock trailer from market leader Ifor Williams features a split front access door. Ventilation flaps on both sides ensure adequate airflow inside, providing the animals with plenty of fresh air in the transport box for a stress-free journey. Additionally, the TA510 model by Ifor Williams impresses with a generous interior size of 178 x 434 x 213 cm, making it easy to accommodate even large cows and cattle without any shortage of space. The aluminum ramp gate provides extra safety on both sides while loading livestock. Indispensable in Agriculture: Gentle and Simple Livestock Transportation After loading, the side partition doors can be conveniently folded inward to prevent livestock from escaping at the rear. The trailer can be easily coupled to a vehicle, with rear lights connected via cable for power supply. With a permissible total weight of up to 3.5 tons, the trailer is suitable for farmers, horse owners, and veterinarians. On hot summer days, the white roof also reflects heat, ensuring a pleasant interior climate during transit. The livestock transporter is rounded off by a robust chassis with leaf spring suspension and a galvanized steel frame. EasyLoad Deck System for Double-Deck / Deck Trailer The factory-fitted EasyLoad™ ramp and folding deck system is unique to Ifor Williams and enables straightforward loading of the upper deck. The double-deck livestock trailer from Ifor Williams is ideal for transporting sheep and similar animals. Special Features • Parabolic spring suspension (leaf springs) • Pressure-treated timber floorboards with non-slip aluminum treadplate covering • Split front access door • Ramp with dividing gate • 2 levels • Additional equipment: – Aluminum side panels – Heat-reflective roof – Rear ramp with spring assist Ihodpfx Abji R Hvlscjw – Aluminum ramp gate – Side ventilation flaps – Lockable ball coupling – Side ventilation flaps – Spare wheel and carrier – 12V electrics with 13-pin plug

Condition: new, pressure: 600bending length: 6050column width: 5100daylight: 680stroke lenght (max.): 455column throat depth: 450messurements (LxWxH): 7100x3275x3910weight approx.: 50.2004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 45Standard Equipment:KK Kletzer Europa We have developed a high-quality model specifically for the European market:The CNC press brake by KK Industries, made in Turkey. Model: KK Kletzer EUROPA XL The powerful EUROPA XL press brake stands out for its high precision, accuracy, and versatile offers a very large open height, resulting in a long cylinder stroke, and an extra-large throat depth to provide maximum flexibility during operations. We focus on delivering quality—reflected also in the control system:As standard, the machine comes equipped with the ESA S640 2D graphic controller. Additionally, the KKI EUROPA XL is equipped with CNC-controlled Y1, Y2, X, and R axes via the wning is also included and fully CNC-controlled through the same ESA S640. When it comes to tooling, we make no machine is fitted with premium top tools and dies from EUROSTAMP Italy. Naturally, a machine is only as good as the service behind t’s why we rely on highly qualified staff with many years of experience in CNC sheet metal processing. Technical Highlights: CNC axes: Y1, Y2, X, and R Controller: ESA S640 (2D graphical interface) Backgauge with double linear guides and ballscrews Motorized CNC-controlled crowning system Heavy-duty height adjustment with handwheel(from 175 tons: on linear guides) Laser safety system on the upper beam CE-compliant safety equipment Various options available Optional Controllers: ESA S640 – 15” 2D Touchscreen: ¤ 4,520.00 ESA 675 W – 21” 3D Touchscreen (Windows-based): ¤ 6,485.00 DELEM DA-66T – 17” 2D Touchscreen (Windows-based): ¤ 10,165.00 Isdpfxod Ehh Re Abcshw DELEM DA-69T – 17” 3D Touchscreen (Windows-based): ¤ 16,350.00

Condition: new, pressure: 320bending length: 3020column width: 2555daylight: 650stroke lenght (max.): 400column throat depth: 450messurements (LxWxH): 3785x2290x3100weight approx.: 14.4504 axes (Y1, Y2, X, R): Ja alle Achsen über die CNC Bombierung Steuerung Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die CNC Bombierung Steuerung Esa S630 (2D Grafik Steuerung)motor power: 30Standard equipment: KK-Industries has the general representation of the DENER Group We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by DENER Model KKI EUROPA XL The strong press brake EUROPA XL with high precision, accuracy universally applicable. Europa XL has a very large installation height and accordingly a long stroke. The projection is also above average in order to limit as little as possible. We focus on quality, which is also reflected in the control system. As standard control we have the high quality DELEM DA 66 T. Also with the CNC axes we have standard Y1, Y2, X and R. Of course, the CNC crowning via the Delem DA 66 T standard. Even with the upper tool and the die we make no compromises and equip the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. Iedpsd Ehikefx Abcshw

Condition: new, pressure: 320bending length: 3020column width: 2555daylight: 650stroke lenght (max.): 400column throat depth: 450messurements (LxWxH): 3785x2290x3100weight approx.: 14.4504 axes (Y1, Y2, X, R): Ja alle Achsen über die CNC Bombierung Steuerung Delem DA 66 T (2D Grafik Steuerung)CNC crowning system by control: ja über die CNC Bombierung Steuerung Delem DA 66 T (2D Grafik Steuerung)motor power: 30Standard equipment: KK-Industries has the general representation of the DENER Group We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by DENER Model KKI EUROPA XL The strong press brake EUROPA XL with high precision, accuracy universally applicable. Europa XL has a very large installation height and accordingly a long stroke. The projection is also above average in order to limit as little as possible. We focus on quality, which is also reflected in the control system. As standard control we have the high quality DELEM DA 66 T. Also with the CNC axes we have standard Y1, Y2, X and R. Of course, the CNC crowning via the Delem DA 66 T standard. Even with the upper tool and the die we make no compromises and equip the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. Ihjdpfx Asfy Sb Eebcjw

Condition: new, pressure: 320bending length: 4050column width: 3550daylight: 650stroke lenght (max.): 400column throat depth: 450messurements (LxWxH): 4740x1725x3100weight approx.: 17.9004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S640 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S640 (2D Grafik Steuerung)motor power: 22 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK kletzer Made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. Iodpfx Abefrqhpecjhw We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X and R CNC axes via the control. Of course, the CNC crowning control Esa S640 (2D graphic control) is also included. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X and R axis Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw Motorized crowning device with CNC control 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Other controls: ESA 640 2D 15'' touch screen control                                         ¤ 4,520.00 inkl. ESA 675 W 3D 21'' touch screen control (Windows Base)         ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)       ¤ 10,165.00 DELEM 69 T 3D 17'' touch screen control (Windows Base)       ¤ 16.350,00 KK Industries GmbH There's something for everyone!

Condition: new, pressure: 400bending length: 4050column width: 3550daylight: 650stroke lenght (max.): 400column throat depth: 450messurements (LxWxH): 5000x2770x3560weight approx.: 23.9504 axes (Y1, Y2, X, R): Ja alle Achsen über die Steuerung Esa S640 (2D Grafik Steuerung)CNC crowning system by control: ja über die Steuerung Esa S640 (2D Grafik Steuerung)motor power: 45Standard equipment: KK-Industries has the general representation of the DENER Group We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by DENER Model KKI EUROPA XL The strong press brake EUROPA XL with high precision, accuracy universally applicable. Europa XL has a very large installation height and accordingly a long stroke. The projection is also above average in order to limit as little as possible. We focus on quality, which is also reflected in the control system. As standard control we have the high quality DELEM DA 66 T. Also with the CNC axes we have standard Y1, Y2, X and R. Of course, the CNC crowning via the Delem DA 66 T standard. Even with the upper tool and the die we make no compromises and equip the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. Ihsdped Ehiajfx Abcow

Condition: new, pressure: 135bending length: 3020column width: 2555daylight: 550stroke lenght (max.): 320column throat depth: 450messurements (LxWxH): 3745x2250x2835weight approx.: 93004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 15 Standard equipment: KK Kletzer Europe Ihjdpfxod Ehine Abcjw We have put together a high-quality model for Europe. The CNC press brake KK kletzer Made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X and R CNC axes via the control. Of course, the CNC crowning control Esa S640 (2D graphic control) is also included. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X and R axis Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw Motorized crowning device with CNC control 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Other controls: ESA 640 2D 15'' touch screen control                                                  ¤ 4,520.00 inkl. ESA 675 W 3D 21'' touch screen control (Windows Base)                  ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)                ¤ 10,165.00 DELEM 69 T 3D 17'' touch screen control (Windows Base)                ¤ 16.350,00 KK Industries GmbH There's something for everyone!

Condition: new, pressure: 60bending length: 1550column width: 1250daylight: 410stroke lenght (max.): 220column throat depth: 400messurements (LxWxH): 2445x2200x2390weight approx.: 4250motor power: 7,5 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK-Industries made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. Ihedpfod En R Dsx Abcow We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X via the control. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X  Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Option: r-Achse                                                                                   ¤ 5.375,-- Other controls: ESA 640 2D 15'' touch screen control                                     ¤ 4,520.00 inkl. ESA 675 W 3D 21'' touch screen control (Windows Base)      ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)    ¤ 10,165.00 DELEM 69 T 3D 17'' touch screen control (Windows Base)     ¤ 16.350,00

Condition: new, pressure: 400bending length: 6050column width: 5100daylight: 650stroke lenght (max.): 400column throat depth: 450messurements (LxWxH): 6855x2780x3615weight approx.: 31.4004 axes (Y1, Y2, X, R): Ja alle Achsen über die Steuerung Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Steuerung Esa S630 (2D Grafik Steuerung)motor power: 45Standard equipment: KK-Industries has the general representation of the DENER Group We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by DENER Model KKI EUROPA XL The strong press brake EUROPA XL with high precision, accuracy universally applicable. Europa XL has a very large installation height and accordingly a long stroke. The projection is also above average in order to limit as little as possible. We focus on quality, which is also reflected in the control system. As standard control we have the high quality DELEM DA 66 T. Also with the CNC axes we have standard Y1, Y2, X and R. Of course, the CNC crowning via the Delem DA 66 T standard. Even with the upper tool and the die we make no compromises and equip the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. Iedpfxod Ehh Ss Abcohw

Condition: new, pressure: 220bending length: 6050column width: 5100daylight: 600stroke lenght (max.): 350column throat depth: 450messurements (LxWxH): 6775x2650x3250weight approx.: 18.0004 axes (Y1, Y2, X, R): Ja alle Achsen über die Steuerung Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die CNC Bombierung Steuerung Esa S630 (2D Grafik Steuerung)motor power: 22 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK kletzer Made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X and R CNC axes via the control. Of course, the CNC crowning control Esa S640 (2D graphic control) is also included. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Iedpfx Aod Ehh Ujbcohw Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X and R axis Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw Motorized crowning device with CNC control 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Other controls: ESA 640 2D 15'' touch screen control                                            ¤ 4,520.00 inkl. ESA 675 W 3D 21'' touch screen control (Windows Base)            ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)          ¤ 10,165.00 DELEM 69 T 3D 17'' touch screen control (Windows Base)          ¤ 16.350,-- KK Industries GmbH There's something for everyone!