Used Relay for sale (504)

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS Bedpfx Ajwzmcbjlbslp After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 3,000 W, Description BAISON M3: (3 kW) from stock Europe. table length 3.050 mm table width 1.530 mm laser head Ray-tools autofocus laser capacity in Kw 3 Raycus total power requirement 25-30 kW We can deliver from (1 till max 6 Kw) overall dimensions 4750x2260x2100 mm weight of the machine ca. 4.550 kg Configuration: - Raycus Laser source 3 Kw (opt. other laser power) - Cypcut (full option control) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - Nesting, With leapfrog, Edge seeking, Fly cutting - 2x LCD monitor control, keyboard, control panel - central Lubrication system - video camera inside machine Cutting capacities: - normal steel 20 mm - stainless steel 12 mm - aluminum 10 mm - brass 8 mm - copper 8 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3050 mm - Y-axis travel 1530 mm - Z-axis travel 100 mm - Axis speed X / Y: 120 m / min - Positioning accuracy: +/- 0.03 mm/m - Repeatability accuracy +/- 0.03 mm – Acceleration max. 1,2 G Table platform 1500mm complete outside for leading: - table load 1000 kg. assisting gases: - mild steel - oxygen (0.5 - 2 bar) - stainless steel - nitrogen (5 - 16 bar) - Aluminium - compressed air or nitrogen (5 - 16 bar)   including: - Complete safety features for CE - Safety relay - Protection grade IP54 - Spare part basic supply package with nozzles and lenses - Professional software for cutting and nesting metal sheets - AC unit for electrical cabinet - Pneumatic table holders clamps for thin metal sheet, anti-vibration system - Automatic door-up and table-out system - Dual temperature water cooling system - Machines for cutting sheets metal - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, Bljdevcbf Ijpfx Albop - equipped with world-famous, durable, high-quality components - Light barrier for moving table, safety protection - Complete CE standard Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control Bljdpfx Alsxrb Tgjbep - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, total width: 920 mm, total height: 940 mm, total length: 1,760 mm, door opening width: 670 mm, door opening height: 500 mm, scan area length: 175 mm, scan area width: 175 mm, travel distance Z-axis: 400 mm, table height: 710 mm, table length: 710 mm, table width: 400 mm, space requirement width: 920 mm, space requirement height: 940 mm, laser wavelength: 1,070 nm, space requirement length: 1,760 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, Fiber Laser System for Professional Marking and Engraving of Metals and Plastics. Equipped with SK-LASER Workstation, Laser Class 1, and automatic lifting door. Laser Class 1 · CE · Made in Germany System & Lifting Door: - Complete system: IPG fiber laser + workstation + electric lifting door Process Sequence: - Start → Door closes → Laser process → Door opens automatically - Door opening approx. H 500 × W 670 mm - Access protection via safety control Laser – IPG (Made in Germany): - Power: 20 W Blodpfxjyimpas Albjp - Pulse energy: 1.0 mJ - Pulse duration: 100 ns - Frequency: 20–80 kHz - Wavelength: 1060–1070 nm - Beam quality M² < 1.2 - Air-cooled, < 400 W Optics & Scanner: - F-Theta lens f = 254 mm - Marking field 175 × 175 mm - Pilot laser + 2 distance lasers - Manually adjustable laser head (Y-axis) Control: - Windows 11 Pro, SSD, 23" monitor - Interfaces: Ethernet / USB / RS232 - SK CONTROL: texts, logos, QR codes, variable data, parameter management Workstation 1 – Laser Class 1: - Seated/standing workstation, aluminum housing - Work surface 710 × 400 mm, 25 mm hole grid - Dimensions 1760 × 920 × 940 mm Motorized Z-Axis (400 mm) - Extraction port DN50 - Safety (PL4) - Emergency stop - 2-channel interlock Safety relay - Rear service door (when open: Laser Class 4) Operation: 230 V / 50 Hz 15–35 °C Condition: - New machine - CE · Made in Germany

Condition: used, mileage: 1,97,958 km, power: 95 kW (129.16 HP), first registration: 01/2013, overall weight: 5,300 kg, fuel type: diesel, color: orange, gearing type: automatic, emission class: euro5, Year of construction: 2012, total length: 6,400 mm, total width: 2,100 mm, total height: 2,800 mm, number of seats: 6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Special equipment: 1 DIN slot in the front under the headliner, trailer socket 13-pole, audio system Audio 20 (radio with CD player), exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, outside temperature display, battery 100 Ah, additional battery (reinforced), turn signals on the front sides, roof console with reading light on driver/passenger side, entry lights, generator 220 A, additional main key, folding cover for storage compartment, steering wheel (steering column mechanically adjustable), steering wheel with multifunction including trip computer, configurable special module, spare wheel with Super-Single tire (235/65 R16), reversing warning system (audible warning signal outside), interior rearview mirror, rear wall with window, mud flaps in front, seat cover/upholstery: artificial leather (cab), seats in the cab: comfort suspension seat, driver's side, reinforced rear stabilizer, reinforced front stabilizer, fuel gauge for auxiliary heater, separation relay with additional battery, rear wall trim, reinforced front axle, preparation for tachograph, thermal insulation in the driver's cab, auxiliary heater (hot water) Additional equipment: Adaptive brake light, driver's airbag, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, brake system with ABS+ASR, headlining in the cab, lockable glove compartment, body/structure: standard double-cab pick-up, fuel tank: main tank 75 liters, headlight range control, engine 2.1 liters - 95 kW CDI CAT (2143 ccm), wheelbase 3665 mm, smoker's package, low emissions according to emission standard Euro 5, safety belt system with warning system (driver's side), service interval indicator Assyst, heat-insulating glazing, permissible total weight 5.00 t, dual tires on 2nd axle/rear axle Additional equipment: central locking * Auxiliary heater * Radio * Snow plow mounting plate with hydraulic quick coupler * Control for snow plow * Elevated headlights * Trailer hitch Bsdpfx Aljzwn A Ejbslp * Turning assistant * Rotating beacon +++Signs of wear and tear due to use+++Owned by a municipality since new+++

Condition: new, mileage: 28 km, power: 110 kW (149.56 HP), fuel type: diesel, empty load weight: 3,415 kg, maximum load weight: 2,600 kg, overall weight: 6,000 kg, axle configuration: 4x2, wheelbase: 2,800 mm, fuel: diesel, color: grey, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 3,076 mm, loading space width: 1,900 mm, loading space height: 400 mm, Equipment: ABS, airbag, central locking, crane, differential lock, soot filter, traction control, trailer coupling, FUSO Canter 6S15 flatbed truck with crane, radio remote control, and hydraulic drilling system. Delivery time approximately 5-6 months. Chassis already on site! Chassis: Fuso 6S15 Canter, gross vehicle weight 6000kg, payload 2625kg - Manual transmission - Limited-slip differential - Batteries 2 x 100 AH - Trailer hitch with ball head, 3000kg capacity with wiring harness (factory-installed), upgrade to 3500kg possible - Heated exterior mirrors - Radio preparation, radio - Reversing warning system - Auxiliary drive with increased rotational speed - Battery cover and AdBlue tank cover - Preparation for battery disconnect relay - Traction tires Continental 205/75/R16C - Seat covers - Optional reversing camera, upon request - Aluminum flatbed, internal dimensions: L 2900 mm x W 1870 mm x H 400 mm (custom dimensions possible!) - Floor panel 18mm - Floor frame with airline load securing rail around the perimeter - Airline also in the front panel Blodpfezvy Nnex Albep - Aluminum side walls, anodized, with folding step, easily removable - 2 x toolboxes - Work light - Zinc primer, Dinitrol application for cavities, stainless steel screws and stainless steel hose clamps Crane: with 4 x hydraulic extensions and radio remote control (Country of origin: Italy) - Incl. manual extension up to 10.6m reach - Incl. hydraulic drilling system controllable via remote control - Radio remote control (high-quality, proportional control, 2 x functions simultaneously, etc.) - Lifting capacity according to the manufacturer: at 3.55m = 995kg, 5.0m = 670kg, 6.40m = 495kg, 7.85m = 365kg, 9.30m = 290kg + manual extension 10.60 m = 200kg - Zinc primer, Dinitrol application for cavities, stainless steel screws and stainless steel hose clamps - Hydraulic tank - Pressure reducer - Emergency stop - Load hook - Operating manual and parts list Errors and prior sale excepted. ... VAT can be shown, ASR, ABS, radio, heated mirrors, central locking with remote control, driver's airbag, trailer hitch, power steering, limited-slip differential, spare wheel, cab: near cab, electric windows, crane, new, emission class: Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, can be rented, particulate matter badge: 4 - Green

Condition: used, Dionex / ThermoFisher FLM: Temperature range: 5–70 °C (max. 15 °C below ambient temperature) Temperature accuracy: ±0.5 °C Temperature stability: ±0.1 °C Temperature precision: ±0.1 °C Column capacity: Up to 3 columns, max. 30 cm length Heating time: From 20 to 50 °C in less than 25 min (at 23 °C ambient temperature, ±0.5 °C) Cooling time: From 50 to 20 °C in less than 35 min (at 23 °C ambient temperature, ±0.5 °C) Control: All functions software-controlled via USB 1.1 I/O interfaces: 2 digital inputs, 2 programmable relay outputs Bljdpszikcxsfx Albsp Column recognition: Electronic identification system for 3 columns Switching valves: 1 or 2 thermostated microvalves with low dispersion (10 ports or 6 ports) Flow splitter: Nano, capillary, or thermostated micro-flow splitter with flow splitter identification system Flow control: Electronically controlled and actively balanced flow splitter, independent of solvent composition and backpressure Column flow range: 50 nL/min to 2.5 mL/min using a predefined splitter and active flow control Flow range selection: 50 nL/min to 1,000 nL/min (using a Nano-LC splitter) 0.5 μL/min to 10 μL/min (using a capillary LC splitter) 10 μL/min to 160 μL/min (using a micro-LC splitter) Gradient delay time: Typically 600 nm. Noise: At a wavelength:

Condition: used, mileage: 1,12,000 km, power: 120 kW (163.15 HP), first registration: 05/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,260 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Special equipment: DIFFERENTIAL LOCK, STANDING HEATER, electrically operated! 2nd battery (auxiliary battery), interior, storage compartment in the headliner of the cab, airbag on the passenger side, acoustic package, trailer socket 13-pin, exterior mirrors electrically foldable, battery disconnect switch 1-pole, mounting rails for roof racks, DAB tuner (digital radio reception), ceiling light in the cargo area with door contact, constant speed control (electronic), grab handle on the rear pillar, left side, grab handle on the rear pillar, right side, driving assistance system: active brake assist, tachograph operation at the front, under the headliner, digital tachograph, chassis: stabilization level II, vehicle without vehicle lowering, gearbox lock for auxiliary drive, cup holder at the front, grab handles on the A-pillars, additional master key, rear door (opening angle 270 degrees), terminal block for electrical connections (driver's seat box), head airbag system (window bag), fuel tank: main tank 93 liters, cargo area light LED, cable duct on the rear portal, cable duct on the side wall, marker lights on the side, multimedia system MBUX (touchscreen 7"), navigation system for multimedia system MBUX, auxiliary drive 2 B with reduction gear, configurable special module, cross member with integrated step, smoker's package, spare wheel with road tires, spare wheel holder under the end of the frame including jack, reversing camera, reversing warning system (acoustic warning signal), shoulder-pelvis airbag (thorax-pelvis sidebag) passenger side, shoulder-pelvis airbag (thorax-pelvis sidebag) driver side, seats in the cab: double passenger seat, seats in the cab: driver's comfort seat, socket (12V connection) in the cab, fuel level sensor for auxiliary heater, separating relay for battery, USB connection in the center below the dashboard (charging function only), fleece battery 92 Ah, reinforced front axle, preparation for all-round beacon lights, jack, thermal protection glazing (windshield with band filter at the top) Additional equipment: Blsdpfx Ajzirlhjlbop 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard, passenger side, adaptive brake light, airbag driver side, anti-slip control (ASR), display for washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior temperature display, automatic activation of headlights, grab handle for sliding door on the cargo area partition, electronic brake force distribution (EBV), driving assistance system: side wind assist, body/superstructure: high-roof box-type standard, child safety lock, communication module (LTE) for digital services, cargo area partition, steering wheel (steering column mechanically adjustable), headlight range adjustment, Mercedes-Benz emergency call system, engine 2.1 liters - 120 kW CDI CAT, wheelbase 3665 mm, low emissions according to emissions standard Euro 6, sliding door cargo/passenger compartment right, seat belt system with warning system (passenger side), seat belt system with warning system (driver side), seat cover / upholstery: fabric, start/stop system engine, trailer stability assist (TSA), maintenance interval indicator Assyst, permissible total weight 3.50 t

Condition: used, “functionally tested; item comes from the dismantling of equipment from an automotive supplier” Quantity available: 12 Manufacturer: BBH Products GmbH Model: SMX10HI Type: Safety controller (compact design) Supply voltage: 24 V DC Function: Safety monitoring of axes, safety doors, emergency stop Interfaces: safe inputs, relay outputs Blodpfx Aezr T Ezelbjp Approval: EN ISO 13849-1, SIL 3, PL e

Condition: used, Year of construction: 2015, - Feed rate: maximum 40 m/min - Motor power: 5.5 Kw - Working length: 7.35 meters Miter saw Manufacturer: Tigerstop Type: UKA 600 Year of manufacture: 2015 Tiger UKA 600 miter cutting system consisting of: Tiger Stop 7.5 automatic feed and stopper Overall length: 7.95 meters Working length: 7.35 meters Net working length (automatic saw): 6 meters Voltage: 220 volts 50 Hz Motor power: 0.45 Kw Feed rate: maximum 40 m/min (depending on the load) Accuracy: +/- 0.4 mm as a sliding guide. Infeed table for TigerStop 6.8 Overall length: 7.4 meters Table width: 325 mm Bedpfx Alszuyx Hebelp Upward stroke miter saw model UKA 600 with pneumatic lift and clamping device Saw unit mounted on a rotary table with diameter: 980 mm Diameter of the saw blade: 600 mm Cutting capacity: 165 x 240 mm at 90 degrees Maximum cutting height: 165 mm at the fence and 175 mm diameter (at 90 degrees) for round material Cutting angle: 30 - 90 - 30 degrees 45 - 90 - 45 degrees with automatic function Motor power: 5.5 Kw Voltage: 400 volts 50 Hz Working height: 920 mm The machine is controlled by a push button for semi-automatic operation or fully automatically for 90-degree angles via the TigerStop. The rotary table is controlled by a Tigerstop servo drive TigerDrive. Outfeed/infeed table with side protection Length: 3.7 meters Width: 325 mm PC control with Beamworks program, computer with touch panel and computer cabinet. Cutting list download option for csv file. Extension with 6-strand flipper loading device For automatic loading of material with a length of 500 - 6000 mm. Shorter pieces can be placed directly on the infeed table. Loading device consisting of: 6 flipper beams with tables including the 2 aluminum profiles 80 x 40 mm per beam, the flippers, the connecting tube, 1 pneumatic cylinder with 24-volt valve. The net loading length is approximately 1.38 m. 1 additional support strand without flipper on the outside of the loader 2 extra cylinder set for the loading device Complete electrical control cabinet with PLC, power supply, Emergency stop safety relay, complete wiring etc. (Including additional electrical wiring for the safety fence door) Label printer package for Beamworks Safety fence on the back of the machine, only on the infeed side. Including entrance door with safety lock And additional protective device on the front to prevent intrusion between the loading strands. Product length measurement with sensor in the protective cover, controlled by the Tigerstop control. The length measurement and download with Tigerlink only work with 90-degree cuts. Tigerlink download software for downloading a csv file (cutting list). Note: The technical data and descriptions are a transcript of the order confirmation at the time. Data is for informational purposes only and is not binding.

Condition: used, Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: Klöckner Moeller, Auxiliary contactor Cntactor Relay unused Ovp -Type: DIL ER-22-G Bsdpfer Im R Hex Albslp -Voltage: 60 VDC -Number: 19x contactors available -Price per piece -Dimensions box: 60/50/H60 mm -Weight: 0.2 kg/piece

Condition: repair required (used), Year of construction: 1989, functionality: limited functionality, !!! SPECIAL OFFER!!! For sale are 2 active milling machines of the brand Hermle and the type UWF 801 Price for both machines in a package One machine has an error when moving in Y, the 2nd machine is missing relays. The idea would be to make one machine out of 2. The value of a functional machine would be approx. 10,000 € What makes the machine special is its active control, which allows it to set feeds that stop at a predetermined level. The machine is easy to operate and yet efficient, which makes it ideal for the do-it-yourselfer but also for industry. x-travel: 500 mm y-travel: 430 mm z-travel: 400 mm Spindle holder ISO: SK40 Control: TNC 114 Spindle head swivels left and right: right/left = 90° ° Vertical quill stroke: 80 mm Speed range: 40 - 2000 / 18 step rpm Feed rate:: X+Y: 4 - 1600 steples mm/min Feed rate:: Z: 4 - 1000 steples mm/min Rapid traverse: X+Y: 1.6 iand Z: 1 m/min Table size: 800 x 395 mm Spindle drive: 3 kW Weight approx.: 1300 kg Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Chip collection tray Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Bodpfxot Ifm No Albjlp Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2018, condition: used, functionality: unexamined, laser power: 150 W, laser wavelength: 450 nm, number of axes: 3, Custom Laser Laboratory System (3-Axis CNC) with Nuburu Blue Laser – Year of Manufacture 2018 Offered for sale is a used, custom-built laser laboratory system (“LaserProcessingCell / LPC-CNC”, project P106), constructed in 2018 as an internal research and development system for process testing. The system was built as an OEM special design to individual specification and was operated exclusively in-house. Equipment / technical features (documented) • 3-axis CNC design (X/Y/Z) for flexible workpiece positioning • Drives: 3× Bosch Rexroth IndraDrive HCS01 with Rexroth MSM031C servo motors • Control: Beckhoff (C6920 industrial PC, EK1100 EtherCAT coupler, EL terminal system) with functional safety (Beckhoff TwinSafe EL1904/EL2904) and Pilz PZE X4 safety relay • PC-based operation with monitor and keyboard • Safety / operating elements: door interlock (Schmersal), emergency stop, operator panel, signal tower, laser warning light Bledpfx Ajzr Ircslbep • Electrical supply: 230 V / 1~ / N / PE, max. 16 A fuse protection • Electrical / wiring diagram available Scope of delivery • Base system (cell, 3-axis system, control cabinet, operator panel) as described above • Laser source Nuburu AO-150 (Class 4 blue laser): wavelength 450 nm, output power 150 W, adjustable 0–100%, SMA-905 fiber (5 m), operation 200–240 V / 1~ / 50–60 Hz, serial no. 31, manufactured 2019, Made in USA; water-cooled • Processing optics Nuburu BlueWeld 100 (fixed focusing / welding head): focal length 100 mm, clear aperture 90 mm, QBH fiber input, integrated air knife, replaceable cover glass, sealed design, aluminum, approx. 5 kg • Extraction and filter unit Fuchs Umwelttechnik MKF320L (230 V, approx. 1.2 kW, IP 42, year of manufacture 2018, CE-marked) • Recirculating chiller Termotek Location / price / viewing • Location: Argelsrieder Feld 14, 82234 Wessling • Price: 35,000 EUR (Negotiable) • On-site inspection is expressly recommended Important notes – please read before enquiring • The system was built as an internal R&D / laboratory device and does not carry CE marking as a complete machine (individual components such as the extraction unit are separately CE-marked). • No operating manual or further technical documentation exists apart from the wiring diagram. • This is a Class 4 laser system (highest laser hazard class, visible blue laser radiation ~450 nm). • The laser source is a US product; no manufacturer support, manufacturer warranty, or spare-parts supply is promised. • Information on components is based on available documentation. Condition, completeness, and functionality are to be verified by the buyer during inspection. Sales conditions / disclaimer The sale is made as a used system, “sold as inspected”, with the exclusion of any and all warranty to the extent legally permissible in business-to-business transactions. No representations are made as to function, accuracy, performance, or fitness for a particular purpose. Commissioning, establishing CE conformity, risk assessment, laser safety (Class 4 laser system), and compliance with all applicable safety and operating regulations are the sole responsibility of the buyer.

Condition: new, Manufacturer: Schmersal Product series: PROTECT PSC1 Type: PSC1-C-100-FB1-PNPS Article number: 103011996 Device type: Programmable safety controller Bsdezcguxspfx Albslp Supply voltage: 24 V DC Safety level: PL e Safety level: SIL 3 Safe inputs: 14 Safe semiconductor outputs: 4 Signal outputs: 6 Safety relay outputs: 2 Communication protocols: EtherCAT, Ethernet/IP, PROFINET IO, PROFIsafe Mounting type: DIN rail Dimensions: 112.5 × 100 × 115 mm Weight: 630 g Available quantity: 6 pieces

Condition: good (used), Full Automatic filling and wrapping machine for mini hotel portions butter in aluminum foil or parchment paper. Product feed by hopper and agitator. Photo cell for print centring . No date coder. Outfeed conveyor of 85 cm. pack format: 40x30x9mm height adjustable, set for 10gr gram. Main motor 2,2 kW. Control panel with relay, operationel button controlled directly on machine. Outfeed conveyor with semi automatic packer (Benhil model: 8534). Pack size: 5x4x5 = 100 packs per carton box = 1 kg per carton box. Testmovie available. Bodpfx Alezhl Efobolp

Condition: used, mileage: 2,29,050 km, power: 140 kW (190.35 HP), first registration: 12/2010, fuel type: diesel, overall weight: 5,000 kg, color: red, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,945 mm, total width: 1,993 mm, total height: 2,815 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, Internal vehicle number: 4841 ----Why autonext? Over 400 cars and commercial vehicles immediately available. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing and trade-in options available. Complete vehicle range available at autonext. Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Get a clear impression now: Use the YouTube link to view the vehicle completely, inside and out: 1st owner, German vehicle, non-smoker vehicle Complete and consistent service history exclusively at Mercedes Benz Permissible total weight: 5,000 kg Engine: 3.0 L - 140 kW V6 Twin tires Manufacturer: Rockstroh Fahrzeugbau GmbH Type: Drain-Jet 100 PE water tank: 600 - 1,200 l Pump drive: Auxiliary drive (PTO) High-pressure system: Safety valve Application area: up to DN 350 Inverter "Flamezum" 4000W/8000W Self-propelled work machine: IPEK SPEZIAL TV Remote control Sewer cleaning nozzles Additional hose reel Backup power supply "UPS" Tool rack "Sortimo" 230-volt sockets Battery charger Trailer hitch Rear view camera Cruise control Regulated air conditioning (Tempmatik) Auxiliary heater Seat heating Sliding door on both sides Parameterizable special module Sliding door assist Comfort driver's seat LED work lights in the cargo area ---- Special equipment: * Radio preparation * Two-way speakers at the front * Storage compartment in the headliner of the driver's cab * Hill start assist * Trailer hitch: fixed ball head * Trailer socket 13-pin Bodpfx Ajzkpbislbolp * Antenna for GSM, GSP and UMTS networks * Outside temperature display * Additional battery (reinforced) * Roof control unit with reading spot on driver/passenger side * Roof light in the cargo area with door contact * Anti-theft alarm * Generator 180 A * Cruise control * Gearbox lock for auxiliary drive * Rear door (opening angle 270 degrees) * Folding cover for storage compartment * Regulated air conditioning (Tempmatik) * Fog lights * Auxiliary drive 2 B with reduction gear * Parameterizable special module * Sliding door cargo/passenger compartment left * Seat cover / upholstery: artificial leather (driver's cab) * Seats in the driver's cab: driver's seat heated * Seats in the driver's cab: driver's comfort seat * Stabilizer bar at the rear * Reinforced stabilizer bar at the front * Fuel level sensor for auxiliary heater * Separating relay with additional battery * Rear door step * Rear wall lining * Fleece battery 95 Ah * Preparation for transmission oil cooling * Thermal protection glazing (windshield with band filter at the top) * Sliding door assist left * Sliding door assist right Standard equipment: Body/Structure: Standard high-roof van, rear wing doors raised and high roof, 3rd brake light, Adaptive brake light, Driver airbag, Anti-lock braking system (ABS), Drive type: Rear-wheel drive, Washer fluid level indicator, Exterior mirrors electrically adjustable and heated, both, Exterior mirrors with integrated turn signal, Brake assist, Braking system with ABS+ASR, Headliner in the driver's cab, Electronic stability program (ESP), Electric windows 2-way, 6-speed transmission - TSG (Eco Gear), Lockable glove compartment, Child safety lock, Fuel filter with water level sensor, Fuel tank: main

Condition: used, mileage: 10,000 km, power: 125 kW (169.95 HP), first registration: 07/2025, fuel type: diesel, overall weight: 3,490 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,932 mm, total width: 2,020 mm, total height: 2,460 mm, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, ++ LEASE ++ BUY ++ LEASE ++ BUY ++ LEASE ++ BUY ++ Bsdpfxjzlm Hle Albolp Internal Number: #559 Mercedes Benz Sprinter 417 CDI, downrated to 3.5 tons, with Rockstroh Drain Jet 100-1 high-pressure flushing system installed Installation: * Rockstroh Drain Jet 100-1 * Auxiliary drive from the Sprinter * High-pressure pump Pratissoli KF28 * Approx. 93 liters/minute at 210 bar (38 kW) * Pressure regulating and safety valve * Hydraulic HD hose reel for approx. 80 m of DN16 hose * Filling hose reel with approx. 40 m of DN20 hose * Approx. 1,000-liter water tank * Water shortage protection * Electric filling system and overflow protection * Electronic speed control * Bypass circuit * Radio remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work spotlights * LED interior lighting * LED roof warning beacons * Various storage options * Watertight plastic floor covering with a non-slip surface Special equipment: 2nd battery (auxiliary battery), interior, 3-button remote control for central locking, acoustic package, trailer socket 13-pin, DAB tuner (digital radio reception), entry handle on the rear pillar, right side, suspension: stabilization level II, parking brake electric, all-weather floor mats, vehicle without lashing eyes, generator 250 A, transmission lock for auxiliary drive, cup holder in front, rear door (opening angle 270 degrees), connection strip for electrical connections (driver's seat box), instrument cluster with color display, cable duct on the rear door, cable duct on the side wall, marker lights on the side, multimedia system MBUX (touchscreen 10.25" with navigation), auxiliary drive 2 B with reduction gear, parameterizable special module, cross member with integrated step, reversing camera, windshield wiper with rain sensor, fuel gauge for auxiliary heater, battery separator relay additional, fleece battery 92 Ah, front axle reinforced, preparation for transmission oil cooling, assistance for sliding door on the right Additional equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard on the passenger side, adaptive brake light, driver's airbag, anti-slip regulation (ASR), display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, outside temperature display, automatic activation for driving lights, entry handle for sliding door on the bulkhead, electronic brake force distribution (EBV), driving assistance system: active brake assist, driving assistance system: crosswind assist, driving assistance system: lane keeping assist, digital tachograph, speed limiter 90 km/h, body/superstructure: van, keyless start, child lock, communication module (LTE) for digital services, fuel tank: main tank 71 liters, bulkhead, steering wheel (steering column mechanically adjustable), headlight range adjustment, Mercedes-Benz emergency call system, engine 2.0 L - 125 kW CDI CAT, wheelbase 3665 mm, low emission according to exhaust standard Euro 6d-TEMP, sliding door load/passenger compartment right, SCR system (AdBlue technology), safety belt system with warning system (passenger side), safety belt system with warning system (driver side), seat cover/upholstery: fabric, seats in the cab: passenger seat adjustable, seats in the cab: driver's seat adjustable, start/stop system engine, service interval display Assyst, thermal protection glazing (windshield with band filter at the top) For further detailed information and/or pictures, please contact

Condition: used, Year of construction: 2023, ---- Demonstration unit A total of 3 units available: AC generator QAS30 KD S5 50Hz 400V3PH EQ: 100583713 Serial No.: ESF373329 Year of manufacture: 2023 AC generator QAS30 KD S5 50Hz 400V3PH EQ: 100583714 Serial No.: ESF373330 Year of manufacture: 2023 Equipment: Language pack 3 EN+DE+NL+FR+IT 5-pole sockets 63 A ELP-B 32?16 A + DS DS-RIM 3P 16A Insulation monitoring relay Battery disconnect switch Blodpfozkz Disx Albsp Operating manual, German

Condition: used, mileage: 2,74,961 km, power: 120 kW (163.15 HP), first registration: 11/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 1, total length: 5,932 mm, total width: 2,020 mm, total height: 2,650 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Special equipment: 2nd battery (additional battery) in the engine compartment, exterior mirrors, electrically foldable, floor covering: plastic in the cargo/passenger compartment, entry handle on the rear pillar, rear right, suspension: stabilization level II, parking brake, electric, vehicle without lowering, cup holder in front, smartphone holder, terminal block for electrical connections (driver's seat storage compartment), instrument cluster with color display, cable duct on the rear portal, cable duct on the side wall, marker lights on the side, multimedia system MBUX (7" touchscreen), hands-free system Bluetooth, steering wheel with multifunction, configurable special module, smoker's package, interior rearview mirror, seats in the driver's cab: comfort suspension seat, driver's side, battery disconnect relay, step on the rear door, fleece battery 92 Ah, reinforced front axle, thermal insulation in the driver's cab, thermal protection glazing (windshield with band filter at the top), auxiliary heater (air), electric Bjdezq N Agepfx Albslp Additional equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard, passenger side, adaptive brake light, airbag, driver's side, traction control system (ASR), indicator for windshield washer fluid level, exterior mirrors, electrically adjustable and heated, both, exterior temperature display, headliner in the driver's cab, automatic activation for driving lights, entry handle for the sliding door on the cargo compartment partition, electronic brake force distribution (EBV), rear door (opening angle 180 degrees), body/superstructure: high-roof van, standard, child safety lock, communication module (LTE) for digital services, fuel tank: main tank 71 liters, continuous cargo compartment partition, steering wheel (steering column mechanically adjustable), headlight range adjustment, Mercedes-Benz emergency call system, engine 2.1 L - 120 kW CDI catalytic converter, wheelbase 3665 mm, low emissions according to Euro 6 emission standard, sliding door, cargo/passenger compartment, right, safety belt system with warning system (driver's side), seat cover/upholstery: fabric, seats in the driver's cab: passenger seat adjustable, service interval indicator Assyst, permissible total weight 3.50 t

Condition: new, mileage: 50 km, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 3,490 kg, color: white, gearing type: mechanical, number of seats: 3, total length: 5,932 mm, total width: 2,020 mm, total height: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, ++ FOR SALE ++ FOR SALE ++ FOR SALE ++ FOR SALE ++ FOR SALE ++ Mercedes Benz Sprinter 417 CDI Downrated to 3.5t with Rockstroh Drain Jet 100-1 high-pressure cleaning unit Internal Number: #508 Bjdezaypkspfx Albelp Rockstroh Drain Jet 100-1 * Auxiliary drive from the Sprinter * High-pressure pump Pratissoli KF28 * Approx. 93 liters/minute at 210 bar (38 kW) * Pressure regulating and safety valve * Hydraulic HD hose reel for approx. 80m DN16 * Filling hose reel with approx. 40m DN20 * Approx. 1,000 liter water tank * Low water protection * Electric filling system and overflow protection * Electronic speed control * Bypass circuit * Remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work spotlight * LED interior lighting * LED revolving beacon * Various storage options * Impermeable plastic floor covering with anti-slip surface * Standard cleaning nozzles Special equipment: 2nd battery (auxiliary battery), interior, 3-button remote control for central locking, trailer socket 13-pin, battery disconnect switch 1-pole, driving assistance system: traffic sign recognition, suspension: stabilizer level III, parking brake electric, all-weather floor mats, vehicle without lashing eyes, transmission lock for auxiliary drive, front cup holder, grab handles A-pillars, additional main key, rear door (opening angle 270 degrees), folding cover for storage compartment, terminal block for electrical connections (driver's seat box), comfort lighting in passenger/cargo area, charging package dashboard (USB ports and 12V socket additionally), cable duct on rear portal, cable duct on side wall, navigation system for multimedia system MBUX, auxiliary drive 2 B with reduction gear, parameterizable special module, crossmember for trailer coupling, crossmember with integrated step, seats in the driver's cab: co-driver's seat comfort, seats in the driver's cab: driver's seat comfort, fuel gauge for auxiliary heater, separation relay with battery additionally, front axle reinforced, preparation for transmission oil cooler, permissible gross weight 3.88 t, sliding door assistance right Additional equipment: 3rd brake light, storage compartment above front windshield, storage compartment below dashboard passenger side, adaptive brake light, airbag passenger side, airbag driver side, acoustic package, hill start assist, trailer coupling: electrical system for trailer socket, exterior mirrors electrically foldable, exterior mirrors electrically adjustable and heated, both, exterior mirrors with blind spot assist, outside temperature display, DAB tuner (digital radio reception), ceiling light in the cargo area with door contact, automatic activation for headlights, grab handle on rear pillar rear right, grab handle for sliding door on cargo area partition, driving assistance system: turning assistant, driving assistance system: active brake assist, driving assistance system: active lane keeping assist, driving assistance system: intersection information assistant, driving assistance system: Attention Assist (fatigue detection sensor), driving assistance system: intelligent speed assistant, driving assistance system: breakdown management, driving assistance system: crosswind assist, digital tachograph, generator 250 A, body/superstructure: standard van, instrument cluster with color display, communication module (LTE) for digital services, fuel tank: main tank 93 liters, cargo area partition continuous, steering wheel with multifunction, truck registration, marker l

Condition: used, mileage: 1,82,178 km, power: 95 kW (129.16 HP), first registration: 02/2013, overall weight: 5,300 kg, fuel type: diesel, color: orange, gearing type: automatic, emission class: euro5, Year of construction: 2012, total length: 6,400 mm, total width: 2,100 mm, total height: 2,800 mm, number of seats: 6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Special equipment: 1 DIN slot in the front under the headliner, trailer socket 13-pin, audio system Audio 20 (radio with CD player), exhaust in front of the rear axle on the left, exterior mirrors without integrated turn signal, outside temperature display, battery 100 Ah, additional battery (reinforced), turn signals at the front on the sides, roof control unit with reading light on the driver/passenger side, entry lights, generator 220 A, additional master key, folding cover for storage compartment, steering wheel (steering column mechanically adjustable), steering wheel with multi-function including trip computer, parameterizable special module, spare wheel with Super-Single tires (235/65 R16), reversing warning system (audible warning signal outside), interior rearview mirror, rear wall with window, mud flaps at the front, seat cover/upholstery: artificial leather (driver's cab), seats in the driver's cab: comfort suspension seat, driver's side, reinforced rear stabilizer, reinforced front stabilizer, fuel gauge for auxiliary heater, separation relay with additional battery, rear wall trim, reinforced front axle, preparation for tachograph, thermal insulation of driver's cab, auxiliary heater (hot water) Additional equipment: Adaptive brake light, driver's airbag, display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, braking system with ABS+ASR, headlining in the driver's cab, lockable glove compartment, body/structure: flatbed double cab standard, fuel tank: main tank 75 L, headlight range adjustment, engine 2.1 L - 95 kW CDI CAT (2143 ccm), wheelbase 3665 mm, smoker's package, low emissions according to exhaust standard Euro 5, safety belt system with warning system (driver's side), service interval display Assyst, heat-insulating glazing, permissible total weight 5.00 t, twin tires on 2nd axle / rear axle Additional equipment: Central locking * Auxiliary heater * Radio * Snowplow mounting plate with hydraulic quick coupler * Control unit for snowplow Blodszwn Diepfx Albop * Elevated headlights * Trailer coupling * Turning assistant * Rotating beacon +++Signs of wear and tear+++Originally owned by a municipal authority+++

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, machine/vehicle number: P02/194, Equipment: CE marking, The machine was completely refurbished between 2020 and 2021, including overhauling the spindle, electrical panel, installing a second filter, touchscreen, PLC, temperature control (solid-state relay), internet access, repainting, etc. Bledpfxoz I Tghj Albsp The machine is currently in production.

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 355 mm, input voltage: 230 V, type of input current: AC, laser power: 6 W, type of cooling: air, total width: 920 mm, total height: 1,760 mm, total length: 940 mm, height adjustment type: electric, scan area length: 110 mm, scan area width: 110 mm, travel distance Z-axis: 500 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 355 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 110 mm, Equipment: cabin, UV Fiber Laser 355 nm, 6 W – NEW, SK LASER KOLLTRONIC with Workstation, Made in Germany Laser Source IPG – Made in Germany Laser Safety Class 1 Workstation: - Combined sit/stand workstation with ergonomic legroom - Fully enclosed aluminum profile construction - Front door with laser protection glass for clear visibility - Bright workspace lighting - Dimensions: H 1760 × W 920 × D 940 mm - Work platform: Stainless steel plate with 25 mm hole grid (710 × 400 mm) - Rear service door, screwed for easy part loading - Motorized Z-axis: travel distance 500 mm (focus depending on lens) - Extraction nozzle DN50 (extraction optional) - Safety (PL4) - Emergency stop - Interlock with 2 standard relays - Safety relay for door monitoring UV Fiber Laser: - Wavelength: 355 nm - Power: 6 W 40 kHz - Pulse energy: 20 µJ - Pulse frequency: 10–300 kHz - Air cooled - Pilot laser red light + 2 distance lasers for focus adjustment (Laser class 2) - Laser head manually adjustable in Y-axis Scanner & Optics - F-Theta lens F = 160 mm, anti-reflective protective glass - Marking field: 110 × 110 mm Control: - Windows 11 Blsdoyiz Dzspfx Albjp - 19" TFT monitor, keyboard, mouse - Interfaces: RS232 / Ethernet / USB - KOLLTRONIC marking software: text, logos, QR/Data Matrix, barcodes Operation: - 230 V / 50 Hz - 15–35 °C Condition: - New machine - CE compliant · Made in Germany

Condition: new, mileage: 21 km, power: 110 kW (149.56 HP), fuel type: diesel, empty load weight: 2,895 kg, maximum load weight: 605 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 2,720 mm, loading space width: 1,900 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, crane, differential lock, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, FUSO Canter 3S15 aluminum flatbed truck with loading crane, immediately available for rent with an option to purchase. Chassis: Fuso 3S15 Canter - Gross vehicle weight 3500kg, payload of the complete vehicle with loading crane and aluminum flatbed approx. 600kg - Manual transmission - Differential lock with limited slip - Batteries 2 x 100 AH - Trailer coupling, ball hitch 3500kg with wiring harness (factory-installed) - Heated exterior mirrors - Automatic climate control - Radio preparation - Reversing warning - Auxiliary drive with speed increaser - Battery cover and AdBlue tank cover - Preparation for battery disconnect relay - Traction tires Continental 195/75/R16C - Seat covers Aluminum flatbed: - Internal dimensions: 2720mm x 1820mm x 400mm - Floor panel 18mm - Floor frame with airline track all around - Airline track also in the front panel - Aluminum side walls, anodized, with folding step, easily removable - Tool box - Work lights - Other flatbed dimensions also possible Loading crane: with 3 x hydraulic extensions (Country of manufacture: Italy) - Lifting capacity according to manufacturer: Max. 995kg at 3.2m = 815kg, at 4.40m = 575kg, at 5.60m = 400kg, at 6.80m = 300kg, at 8.05m = 220kg - Design according to CE directive (EN 12999) Bodpfxjywzyge Albjlp - Swivel range 370° (mechanical swivel range limitation 190°) - All hydraulic cylinders are double-acting - Piston rods are hard chrome-plated - Pressure relief and load holding valves - Emergency stop - Control block with 5 control valves - Separate hydraulic tank (33l) with filter, mounted on the crane base - Support legs, extendable on both sides, special support, support width 3.10m - Hydraulic support legs, swiveling by 30° and 180° - CE, incl. M.O.L. - Load hook and attachment brackets - Onboard voltage 12V - Electrical modules for Danfoss S800 control block, 4 functions - Danfoss control block S800, 5 functions incl. high-pressure filter - Special support legs, support width 3.10m, 1 piece - Additional cost for shortened support legs (by 80mm) - Mechanical arm extension, lifting capacity 1.30m (7.0k) - Stainless steel screws and stainless steel hose clamps - Dinitrol application (cavities) - Zinc primer - Switch for work lights near the control block, factory-installed - LED work lights on the knuckle arm, factory-installed - LED for 2 support legs - Optional: Reversing camera with Carplay, shovel holder, 90° rope, ladder carrier / transport frame for front or rear wall, additional storage boxes available. Subject to errors and prior sale. ... Climate control, automatic climate control, VAT can be shown separately, ASR, ABS, trip computer, electric windows front, electric immobilizer, central locking with remote control, trailer coupling, power steering, differential lock, spare wheel, twin tires, cab: short cab, electric windows, work lights, crane, new, emission class: Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, can be rented, emission sticker: 4 - Green, reversing camera

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 135930-100, clamping force: 4,000 kN, screw diameter: 55 mm, clearance between the columns: 800 mm, column diameter: 125 mm, displacement volume: 546 cm³, injection pressure: 2,041 bar, injection weight: 497 g, mold height (min.): 350 mm, ejector force: 65,000 N, ejector stroke: 200 mm, opening stroke: 780 mm, plate length: 1,160 mm, plate width: 1,060 mm, installation height: 1,130 mm, total length: 7,650 mm, total width: 2,150 mm, total height: 2,300 mm, overall weight: 14,400 kg, heating capacity: 23.1 kW (31.41 HP), pressure: 240 bar, power: 45 kW (61.18 HP), Model: TM 400/1330 Year: 2014 Manufacturer: Wittmann Battenfeld Country of origin: Austria Blodpfxjyw T Txj Albep Weight: 14,000 kg Clamping force: 4000 kN (400 tons) Hydraulic system pressure: 250 bar Control system voltage: 24 V Power supply: 50 Hz, 3-phase Largest motor FLA Electrical cabinet: includes servo drives, safety relays, and hydraulic control boards