Used Ribbed Dressing Plate Seals Table for sale (29,699)

Condition: used, Year of construction: 2019, sheet width 6080 mm plate thickness 6.0 mm rear stop 1000 mm cutting angle 0.5 - 2.0 ° down holder 29 Stk Bwsdpfx Aozvq Etjbtjt no. of strokes ca. 10 Hub/min total power requirement 22.0 kW dimensions of the machine ca. 7300 x 2150 x 2750 mm weight 25500 kg Current list price: approx. 150.000 euros Features: - Electro-hydraulic, slide-guided sheet metal shear - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - Electrically driven backgauge with ball screws - Manual central lubrication - Cut line illumination - Ball bearings in the table - Fold-up finger guard, 1.000 mm - Side stop with T-slots, tilting stop, and scale - 5 support arms with T-slots - Photoelectric sensors on the rear of the machine - 1 freely movable foot switch Includes optional equipment: - Pneumatic sheet metal holding device

Condition: excellent (used), Year of construction: 2004, Engel INSERT 330H/90 Controll: CC100 Condition: funtional Vertical machine with Horizontal injection Rotary table diameter: 1100mm Bwsdpfeu Dbkdjx Abtet Clamping force: 90 ton Opening max. : 570 Opening min. : 270 Platen size: 590x340 Screw: 40 mm Screw length: 160 mm Injection volume: 201 cm3 Injection pressure: 1230 bar Motor: 15 kw Weight: 5600 kg Height 2800 mm

Condition: good (used), Year of construction: 2004, Engel INSERT 200H/40 Control: CC100 Condition: fully funtional Clamping force: 400 kN Opening stroke: 300 mm Ejector force: 20 kN Ejector travel: 100 mm Opening max. : 570 Opening min. : 270 Platen size: 590x340 mm Screw: 25 mm Screw length: 140 mm Bwsdotrhv Sepfx Abtot Injection volume: 69 cm3 Injection pressure: 2090 bar Weight: 5400 kg Pump drive power: 15 kW

Condition: excellent (used), Altendorf F45 ElmoDrive panel saw Extensive equipment 320cm sliding table, Two-way tilting (+46 to -46 degrees) with motorized adjustment, Bwodpfxezxc D Ho Abtet Motorized up-and-down adjustment of the saw blade, Right-hand rip fence with motorized adjustment up to 1370mm, 2-axis scoring saw with electric adjustment 5.5KW main motor, speed controlled by a frequency inverter, Max. blade diameter 450mm, Electronic display on the rip fence and sliding table, DIGIT-L Year of manufacture: 2023 Very good condition, barely differs from a new machine.

Condition: new, Year of construction: 2025, load capacity: 20,000 kg, 20-ton container rotating device, roller stand, complete set 380 V, speed continuously adjustable from 200 to 1000 mm/min. for diameters from 500 mm to 4000 mm roller diameter 300 mm x 140 mm temperature resistance of the support rollers: 100°C synchronous dual drive AC motor, 380 V, 750 W Bwjdpfxsifgu Us Abtjt with hand and foot remote control, complete set

Condition: excellent (used), CATALOGUE NUMBER 8064 TECHNICAL DATA - Max. diameter of the main saw blade with a scoring blade: 350mm - Max. cutting height: 130mm - Main blade adjustable up/down + angle, manually - Spindle diameter: 30mm - With a crosscut table - Cutting length on the table: 3200mm - Cutting width adjustable electrically with a fence: 1320mm - With a side table - With a scoring blade - Max. diameter of the scoring blade: 120mm - Spindle diameter: 20mm - Main motor: 7.5kW - 3 types of spindle speeds: 3000/4000/5000 rpm - Diameter of the dust extraction outlet: 120mm - Dimensions of the table with extension and widening: 1870x1440mm - Blade guard - Dimensions (L/W/H): 4100x3400x1500mm - Weight: 860kg ADVANTAGES - Italian made - Cutting width adjustable electrically - With a scoring blade - Unpainted - DTR and CE documentation - Used saw, very good condition Net price: 26900 PLN Bedpfszrwbtsx Abtjwt Net price: 6405 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: used, machine/vehicle number: 5240, Housing for 101 plates. Delivery supply: with 2 end plates of stainless steel. Intermediate plates are not included Plates maximum: 100 Plate formats: 400x400 Platefilter features: Manual spindl Dimension  ca. 300x60x100 cm dimensio between the first plate to the spindle ca. 170cm Bodpezx Aqtjfx Abtewt

Condition: used, Year of construction: 1993, offered without plates. Bwjdpfxozx Arws Abtjt Plates maximum: 100 Plate formats: 600x600 Platefilter features: Electric-Hydraulic press dimension ca. 380x80x120 cm Distance between first plate and spindle approx ca. 180cm

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: E.05.08.6.1.0.RB, total length: 1,350 mm, power: 0.75 kW (1.02 HP), input voltage: 400 V, type of input current: three-phase, working width: 600 mm, working height: 1,050 mm, Scissor lift table, WTT Conveyor Technology. Equipped with non-driven support rollers made of precision steel tubing, 50 x 1.5 mm wall thickness, with a 12 mm spring axle. Support roller spacing: 150 mm Roller track length: 1500 mm Bedpszyfwxofx Abtswt Installation length of the support rollers (width): 550 mm Platform width: 600 mm

Condition: good (used), various counter bearing support blocks, rollers 5-fold adjustable for transverse and longitudinal rotation to relieve e.g. the welding rotary table or to transport pipes different versions Height adjustment in steps or stepless Bwjdpfxsl Dwnle Abtst different heights The carriers themselves have a load capacity of up to 8 tons prices from 480.-€ to 850.-€

Condition: like new (used), Year of construction: 2023, This machine is tailor-made for businesses seeking a simple and reliable packaging solution. The maximum speed is up to 1,500 bags per hour. Operation is easy, requiring just two simple steps: filling the bag from the top and sealing the bag. For sale: Autobag bags in the following sizes: 150 × 250 – 1.5 million bags 200 × 320 – 2.5 million bags Bedpfx Absr E Dpzetewt Price for full Euro pallet: 1 pallet: €0.025 per bag 2 pallets: €0.019 per bag 3 pallets: €0.018 per bag 4 pallets: €0.017 per bag 5 pallets: €0.016 per bag and so on 10 or more pallets: €0.01 per bag From 1 million Autobag bags: from €0.01 each Currently reserved.

Condition: new, functionality: fully functional, Features of the system 1. Chain conveyor, 2.9 meters in length (other lengths available upon request) 2. Two custom-made forming shoulders with a fixed shape, adapted to the product dimensions 3. Single film loader + Automatic film centering device 4. End sealing unit, box motion, single sealing jaw 5. Robust, medium fin sealing structure 6. Eight servo-controlled drives 7. HMI control panel 8. Four individual temperature controllers 9. Housing made of stainless steel 304 10. Documentation in the local language 11. Print mark control 12. Bag length programmable 13. Standard running direction: left to right Technical parameters 1. Product length: L120-600mm 2. Product width: B70-250mm 3. Product height: H20-120mm 4. Packaging speed: up to 60 products/min (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Connection voltage: 1 phase, 220V 50Hz 7. Total power consumption: approx. 8.8 kW 8. Machine weight: approx. 1100 kg Bwjdpfxek Dz Hwe Abtot 9. Machine dimensions: approx. 4500 x 1070 x 1590 mm

Condition: used, functionality: fully functional, Year of construction: 2021, !! Short delivery time, we are happy to advise you !! A simple flow pack machine suitable for packaging various products. You have the option to inspect it locally before making a purchase decision. 3 units available Used. Thermal transfer printer available as an option: €1,900 Bjdeu T N Umspfx Abtswt

Condition: excellent (used), Electro-permanent magnetic clamping plate 500 × 300 mm EPEFINE2 incl. control unit – sinker EDM / EDM Bwjdpfxszyq Ups Abtot Electro-permanent magnetic clamping plate, type EPEFINE2, including the corresponding control unit. Technical data: Magnetic clamping plate approx. 500 × 300 mm Fine transverse pole spacing 5 mm Voltage 360 V DC Design for sinker EDM / EDM with special seal, special cable and special cable gland Polarity reversing control unit, type BUR-20 for EP system Magnetization/demagnetization Machine interlocking System installed in 2017; the original new price of all items at the time was €6,327 net / €7,529.13 gross, including transport. Inspection and collection possible by arrangement. Shipping/freight forwarding by agreement.

Condition: used, Cutting length: 3150mm, cross-blade cutting length: 180mm, idle stroke rate: 25/min, connected load: 47kW, an on-site inspection is possible. Bwjdpfozybutex Abtst

Condition: good (used), Year of construction: 2018, functionality: fully functional, Equipment: CE marking, scorer, Horizontal panel dividing saw / Horizontal panel saw with lifting table feed Manufacturer: SCM / Gabbiani Type: Gabbiani ST 115 Year of manufacture: 2018 Horizontal beam saw with lifting table feed from the rear, originating from a parquet factory. Cutting length approx. 3200 mm Cutting depth on the lifting table approx. 1850 mm Max. stack height on the lifting table (with supports) approx. 600 mm Saw blade projection 115 mm Bjdszyx Evepfx Abtewt Variable saw carriage speed 0 - 135 m/min. Variable sliding table speed 0 - 70 m/min. Motor of the main saw blade approx. 9 kW Main saw blade speed 3900 rpm Saw blade diameter 400 mm Motor of the scoring saw approx. 1.8 kW Scoring saw speed 6300 rpm Scoring saw blade diameter 160 mm 6 clamping devices (3 of which with front aligner) 2 air cushion tables, each with blower Voltage: 400 V, 3 phases, 50 Hz, 43 A Weight approx. 5500 kg Data partially estimated and taken from the brochure.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 4.6209, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,120 mm, travel distance Z-axis: 1,750 mm, table load: 3,000 kg, spindle diameter: 100 mm, spindle speed (max.): 1,120 rpm, workpiece weight (max.): 3,000 kg, The last conventional machine standardly produced by TOS VARNSDORF Solid design Also available in CNC version RET100B and the overhauled machine W100A-R MAIN PARAMETERS Workspindle diameter 100 mm Clamping taper 50 ISO Spindle speed range 1120 rpm Table transversal travel (X) 1600 mm Headstock travel (Y) 1120 mm Bjdpfx Abjfk I Nietswt Table longitudinal travel (Z) 810 / 1250 / 1750 mm Spindle stroke (W) 900 mm Table clamping surface max. 1500 x 1500 mm x mm Table loading capacity max. 3000 kg

Condition: used, plate width 2510 mm plate depth 5135 mm Bwedpshpvavofx Abtjt plate height 345 mm weight ca. 10 t required space 2,5 x 5,1 x 0,38 m

Condition: new, Year of construction: 2025, Stable steel cast iron construction With rigid milling spindle 3 spindle speeds from 3500 to 10000 min⁻¹ Milling spindle with clockwise/counterclockwise rotation Large-sized milling head made of cast iron, mounted directly on the table With extraction hood under the work table for improved extraction Solid and precise cast iron table Bwodpfehp Rcrox Abtot Fast and easy speed changes High-performance motor with 5.0 kW Standard arc milling guard Quality Made in Italy Equipment details Cast iron milling head Mounted directly on the milling table Milling spindle mounted high up with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3500 to 10000 min⁻¹ High-performance motors Equipped with a powerful three-phase motor Milling guard The standard milling guard is equipped with a height-adjustable guide rail and protective plate for maximum safety. Milling fence Precise milling fence with quick adjustment and fine adjustment with a scale on the fence cheek The integrated extraction port ensures a clear view Milling table opening A large milling table opening also allows the use of larger planing cutters and tenoning and slotting tools above and below the table Arc milling guard Included as standard Reversible fence cheeks Versatile fence that can be integrated to bridge the tool gap Enables safe working even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx. 240 kg Extraction connection Extraction nozzle diameter 2 x 120 mm Work table Work table length 1945 mm Table height 900 mm Work table width 695 mm Installation information Space required Length 1945 mm Machine body Width/Depth 575 mm Space required Width/Depth 920 mm Working area Length 1600 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Working area Width/Depth 1600 mm Machine body Length 1000 mm Explanation of working area: Please add the specified dimensions to the space required to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400 V Motor power 5.0 kW Mains frequency 50 Hz Milling spindle Usable spindle length 100 mm Spindle speed(s) 3500/7000/10000 min⁻¹ Spindle overhang max. above table 130 mm Spindle arbor diameter 30 mm Maximum milling tool diameter Maximum tool diameter that can be lowered 180 mm SCOPE OF DELIVERY Arc milling guard Aluminum fence cheeks Table extension left and right Extendable workpiece support

Condition: excellent (used), Welding positioner, Focker Strähler, 8 tons 8000 kg load capacity with hand and foot remote control Speed and inclination continuously adjustable 0.02 rpm to 1.1 rpm Diameter 1500 mm Height to center when tilted 1170 mm Height in horizontal position 1400 mm Bsdpfx Abjf Ezdnetswt Length 2400 mm Width 1500 mm Condition: visually and technically flawless, runs very quietly.

Condition: excellent (used), Welding positioner, 2-ton load capacity with hand and foot remote control Speed and inclination continuously adjustable good condition, machine is robust and durable Height when tilted up to the center: 1.05 meters Height in horizontal position: 1.3 meters Diameter: 1.3 meters Length: 2.2 meters Width: 1.4 meters Bsdpfegytclsx Abtowt Speed: from 0.01 revolutions per minute to approximately 1.0 revolution per minute.

Condition: used, plate width 2870 mm plate depth 2000 mm plate height 300 mm weight 5200 kg 3 identical plate fields available (A2017) LxWxH: 2870 x 2000 x 300mm Area for 3 slab fields: 17.22m² Dimension of the T-slots; 36 x 64 mm - height: 45 mm Weight: KG Bwjdpfjgrm U Eex Abtst

Condition: used, table length 1000 mm Bwodjgrndijpfx Abtet table width 1000 mm table load / t weight 1100 kg table height 100 mm

Condition: new, Year of construction: 2025, load capacity: 600 kg, 600 kg load capacity Welding turntable height adjustable with through hole 100 mm Plate diameter 700mm Horizontal height min. 0.65m, max. 1.25m Height tilted min. 0.45m, max. 0.95m Speed from 0.01 - 1.3 rpm Tilt up to 135° Bjdpor Tr Axjfx Abtswt Hand and foot remote control with speed display Very robust Chuck at extra charge depending on version and size

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Bwodertqm Depfx Abtjt Basic dimensions: Width: approx. 2,000 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 1,700 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 2,000 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm 06x self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.