Used Rivet Gun for sale (1,552)

Condition: good (used), Year of construction: 2006, Used insertion press HAEGER 824 plus-1H with feed hopper Technical data: Manufacturer: HAEGER Model: 824 plus-1H Year of manufacture: 06/2006 Condition: good, used Press force, min: 2.0 kN Bjdpj Ahwkrofx Akneww Press force, max: 72.0 kN Insertion capacity up to 1800 pieces Adjustable range of ram: 0-220 mm Overhang: 610 mm Connections: 3 phases, 50 Hz, 380 V, 16 A Electronic control / CE: 24 V Motor power: 3.6 kW Oil capacity: 83 l Dimensions (W x D x H): 1100x1650x2400 mm Weight: 1450 kg Fully hydraulic insertion press for manual and/or automatic processing of insertion fasteners from all manufacturers. Fastener range: M2-M10. Standard equipped with a patented safety control system. Due to the integrated fixed stop, the precise pressure build-up, and the low assembly value, the machine is ideally suited for use as an "assembly/riveting press". including accessories: Modular, patented fastener feeding system from Haeger-MAS-9 Advantages: - Fasteners in the size range M2-M8 can be fed - Processing capacity up to 1500 pieces per hour - Very easy tool change without adjustment effort (plug-in tool modules) - Tool change time, e.g. from nuts to bolts or bushings, approx. 2 minutes - Large feed hopper made of wear-resistant, stainless steel The picture shows the same model, but not the machine itself that is for sale.

Condition: used, Year of construction: 2013, Technical details: x-travel: 3.600 mm y-travel: 1.100 mm z-travel: 900 mm table surface area: 4.200 x 1.100 mm control: iTNC 530 HSCI HEIDENHAIN turning speeds: 20 - 10.000 1/min taper ISO: SK 50 rapid traverse: 40 m/min tool change unit: 120 Pos. spindle drive: 44 / 32 kW total power requirement: 77 kVA weight of the machine ca.: 31,5 t dimensions of the machine ca.: 7 x 3,5 x 3,2 m 5-axis-simultan universal machining-center, NC-swivelling milling-head (B-axis), rigid table with integrated NC-rotary table (left), dia. 1.050mm (max. table load 1.200kg), internal cooling device 40 bar, coolant 600l, paperfilter, chip conveyor, mode 4, el. handwheel, infrared touch probe TS 649, BLUM-Laser, Bwjdps Ahywwjfx Aknjw prepared for 3D quickset (software), dividing wall, twin table machining, DMG netservice, mech. setting-up device for toolholders, oilmist suction, flush gun, incl. zero-point-clamping system (as seen on Fotos) machine with energy-saving ballscrews (X, Y, Z) ! approx. 47.000 machine on hours, 13.700 spindle hours *

Condition: like new (used), 2,500 m² Schaefer R3000 storage racking system, 2-3 tiers Used, top condition, like new, see pictures Manufacturer: SCHÄFER R3000 CAD planning and installation 2-3 tiers Price on request! Partial sale possible Negotiable price: on request! Goods are in stock and promptly available Transport and installation possible on request. Inspection possible at any time by appointment. Further information on request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our general terms and conditions, all prices excl. VAT, ex warehouse) Lenox Trading – Top storage technology & heavy-duty racking, used & new Description: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: Bjdpfxjfiqhls Aknsww • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel construction platforms immediately available • Weekly turnover of 30–50 semi-trailer loads for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving units, tire racks, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and installation. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS AREA: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including thorough cleaning and removal. 2. Commission auction: Carrying out auctions on behalf of clients. Our full service is provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and thorough cleaning and handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,480 mm, loading space height: 2,165 mm, loading space volume: 56 m³, Equipment: ABS, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width: 1,600 mm Axles and suspension: Disc brake 430 mm Jost (formerly Mercedes DCA) axle units, 3 x 9 tons, with air suspension, air springs arranged centrally to the chassis longitudinal beam. First axle can be lifted with starting assist and manual forced lowering. Smart Board information center, lift/lower valve, BVA brake wear indicator. Tires and wheels: 6 wheels with tires size 385/65 R22.5, from various manufacturers (manufacturer's choice), with steel rims 11.75 x 22.5 ET 120. Fifth wheel: Mechanical version with single-sided operation in 2 speeds with pivoting base for air suspension. Braking system: According to E.G. standards, dual-circuit Wabco system, spring-loaded parking brake acting on two axles and Wabco EBS incl. RSS (Roll Stability System) and Premium modulator, Wabco Smartboard information center, aluminum air tank system. Bwjdpfx Akefi Nmusnew Electrical system: According to STVZO guidelines, with 2 five-chamber lights, type Aspöck Ecopoint 2, 24-volt system with 2x7 and 1x5-pole sockets, with side marker lights, 2 separate LED rear lights, 1 LED interior light. Tipping body/dump bed: Internally fully welded. Aluminum dump bed, side walls with 30 mm thick plank profiles (2-3 mm) welded together, 600 mm wide. Floor made of 8 mm thick, highly wear-resistant alloy (5383H34/HB 110). Front wall reinforced, 4 mm thick, in a straight design. Rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 configuration, with a grain slide, or alternatively in a 1/2-1/2 configuration with a grain slide on each side. Aluminum round profile welded on the side and bottom for sealing the door gap on the rear doors. Rear doors partially covered with smooth aluminum. Operation of the universal door automatically pneumatic with separate lever that can be locked. Rear supports made of aluminum, can be swung out. Two retaining straps with rubber buffers on the tipping body, attached to the frame at the front wall. Hydraulic system: Tipping cylinder with large cylinder body Hydraulic cylinder mounted on the front wall with a max. working pressure of 150 bar, manufacturer Edbro, with approx. 2.5 m hydraulic hose and quick-release coupling 1", tipping angle approx. 48 degrees. Accessories: 6 Parlok fenders, complete mud flaps covering the entire vehicle width attached to the U-profile. Aluminum spare wheel holder. Folding side impact protection on the right side. Large tool box, type 860. Approx. 3 m aluminum ladder. 3 aluminum swing supports mounted centrally, approx. 150 mm higher. Additional centrally mounted support receiver for positioning a total of 2 supports to increase the loading width. Tarpaulin with a central light strip and separate reinforcements in the wear areas, approx. 660 gr./m2 quality, with tarpaulin system. Circumferential rubber rope in the rear end of the tarpaulin to be attached to two tension hooks on the rear swing support. Walkway on the frame in chassis color. Tarpaulin closure with quick-release fastener. Tarpaulin end at the rear with welded-in rubber rope to prevent water ingress. Robust folding underrun protection with two towing eyes left and right incl. locking pin. 2 "Clear-Pass" mud flaps on the fender according to EG standard, attached to the frame on the side. Aluminum grain chute with tarpaulin bag attached to the frame on the side. Holder for s

Condition: new, Industrial belt sander Scantool 75 x 2000 with integrated dual dust extraction system Sanding belt 75 x 2000 mm Working width: 75 mm Motor: 4.1 HP Speed: 34 m/s Bsdpfx Akjflt Amsneww Table height: 475 to 1240 mm Sanding belt dimensions: 75 x 2000 mm Platen size: 530 mm Weight: 100 kg The Scantool industrial belt sander models with dual dust extraction system, 75 x 2000 and 150 x 2000, are powerful, high-quality machines built to the strictest environmental and safety standards. The belt sanders are equipped as standard with a motor brake, adjustable work height, eye protection, angle stop, and motor protection switch with zero-voltage release. This low-noise machine with CE marking is ideally suited for sanding all metals. Motor protection switch with zero-voltage release Separate emergency stop Motor brake Adjustable angle stop Eye protection The continuously adjustable work height enables an ergonomically correct working position. Perfect design for fast, efficient, and safe sanding. Self-adjusting belt tension. Danish top quality.

Condition: as good as new (ex-display), Year of construction: 2025, Immediately available! Bedpjf A Eg Defx Aknjww Tank capacity: 192 L External dimensions: 1330 x 945 x 1490 mm Usable dimensions (internal): 680 x 435 x 330 mm Load weight: 80 kg Ultrasonic frequency: 40 kHz Ultrasonic power: 1200 W Bag filter: Yes Automatic filling: Yes Discharge via pump: Yes Insulated lid: Yes

Condition: used, Year of construction: 1996, Overview This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is still in production and be viewed in person. Techn. Details   Capacity:  10,000 bph Min/ Max: 5,000 bph – 13,000 bph Bottle type: 0,5L, Euro, NRW Bottles per row: 10 Bottles in the machine: 1,980 Bottle cell carriers: 204 Dimensions:  Length: 8,100 mm Width: 1,395 mm Height: 2,300 mm (without feet) Weight: approx. 9,210 kg Water consumption: 4,0 - 4,8 m³/h Heat consumption 80°C: 700 - 840 kJ/ h x 1000 Electrical consumtion: 17 kW Incl. Spare parts Motors for rear and front drive Bottle cell carriers Wear parts Bwsdpfx Asu H R Nnjknew

Condition: ready for operation (used), Siemens 6EV2031-4CC power supply, internal mounting power unit. A 626 017, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bsdpfxsi Edvaj Aknjww

Condition: ready for operation (used), Siemens 6EV2031-4EC power supply, installation-ready unit. A 626 611, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bwjdei Edvlepfx Aknjw

Condition: ready for operation (used), Siemens 6EV2031-4EC power supply, installation-ready unit. A 626 798, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bodpei Edvpofx Akneww

Condition: ready for operation (used), Siemens 6EV2031-4FC00 power supply, internal mounting power unit. A 629 001, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bwedpoi Edvtsfx Aknsw

Condition: good (used), Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Röhm, four-jaw chuck Ø 200 mm -Passage: Ø 55 mm -Bolt circle: Ø 133 mm Bwedpfx Aotxklyoknjw -Mounting: Short taper 6 / cone 103 - 105 mm short taper flange with Camlock fastening -Accessories: incl. 2 sets of interchangeable jaws and clamping tool -Dimensions: Ø200 x 185 mm -Weight: 24 kg

Condition: used, Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing: for Ø 100 mm shaft -made of: gunmetal -Number: 3x bearings available -Price: per piece Bedpscgdtfefx Aknoww -Dimensions: 160/125/H155 mm -Weight: 12 kg/piece

Condition: used, Panel saw, panel dividing saw, horizontal panel circular saw, dividing saw -Motor power: 6 kW -Speed: 2880 rpm -Diameter max. Saw blade: 340 mm -Cutting height: 100 mm -Saw motor laterally adjustable on dovetail guide: approx. 1000 mm Bjdpfx Asb R Addokneww -Saw motor pneumatically adjustable in height -with cleaning brush: 1000 mm wide -Max. Intermediate width: 1700 mm -Dimensions: 2200/1500/H2100 mm -Weight: 1220 kg

Year of construction: 2012, condition: good (used), functionality: fully functional, For sale is a CFT compact filter technic top-mounted dust extraction system, type HKAF 12-30 The system is fully functional and ready for use immediately after connection All documentation for the system available thanks to CFT Digital Contact details can be passed on after purchase. Bsdpferfcpmsx Aknjww Technical data: Year of construction: 2012 Length: 2476 mm Width: 1277 mm Height: 2330 mm Weight: 600 kg Exhaust air flow rate: 28 m3/min Filter elements: 12 pieces Filter area: 30 m² Filter material PMB 600*500 Shock valves: 4 pieces Rotary cycle control unit: 12 cycles Compressed air parameters: 4.5 bar Loading & or shipping possible for an additional charge Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2026, condition: new, functionality: fully functional, Function Easy handling thanks to fully automatic cleaning process. This allows professionals to focus on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS-Special Cleaner WAS (washing lye). The soiled parts are placed in the rotatable washing basket and the lid is closed. After setting the desired wash temperature and time, the device is switched on and the lye is being heated in the tank. In the closed device, the basket rotates at constant speed around its own axis. The pump aggregate draws the lye from the washing tank and transports it through 3 stainless steel nozzle tubes with overlapping flat jet nozzles. Advantage The soiled parts are radiated intensively with the hot lye from all sides in the rotating basket, driven by geared motor. After completing the cleaning process, the device switches off automatically. 1 pump arranged horizontally Specific output: 120 L/min 3 three-dimensional stainless-steel nozzle tubes robust stainless-steel design additional small parts cleaning basket made of stainless steel (Ø 170 mm) rotating washing basket made of stainless steel, driven by geared motor steam extraction screen plate with filter inlets made of stainless steel above the wash tank water indicator longer nozzle tube above and below 9 nozzles more than Mini 60 Technical data Tank capacity 80 l Basket diameter 600 mm Capacity 100 kg Temperature min. - max. 0-60 °C Dimensions (W x D x H) 945 x 830 x 1025 / 1640 mm Weight 60 kg Spray rate 7200 l/h Material Stainless steel Power supply 3,9 kW / 400 V / 50 HZ Bjdpfx Akjhct Eajnjww Nutzhöhe 380 mm Pumpendruck 2,4 bar

Condition: new, Electrostatic air filter for air-handling systems - central exhaust ELBARON - RON 15 S oGk – 15.000 m³/h – 230 V – without fan Max. Air flow rate: 15,000 m³/h Total power consumption*: 3 x 0.02 kW Operating voltage*: 230 V, 50/60 Hz, 1PH + N + PE Dimensions L/W/H in mm: L 701 / W 1020 / H 1945 Colour: RAL 7035* Weight: 445 kg Manufacturer: ISI Industrieprodukte GmbH *Special voltage or special colour on request The application: The ELBARON duct air filter series were designed for central air filtration in production halls as well as for plant and building technology. Your advantages: - 15 unit variants available - Direct from the manufacturer - High filtration efficiency Bodpfx Ajh Rfccokneww - Modularly expandable - Easy maintenance - Low follow-up costs due to reusable filter media - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Also available as mirror-image version - Robust construction - Quality Made in Germany Based on our filter technology, which has been tried and tested for years, this filter unit can be used as a central air filter unit in ventilation ducts. ELBARON technology reliably filters aerosols, oil mist, emulsion mist and smoke from the air. This way, the air in your production hall is cleaned effortlessly. Our air filter can also be easily integrated into central systems for machine extraction. ELBARON filter units protect downstream heat exchangers or air conditioning units from premature contamination. ELBARON filter technology is based on environmentally friendly electrostatic particle ionisation. This makes our filter units the ideal solution for large production plants due to their high separation efficiency, large capacity and easy maintenance. Take advantage of the enormous potential of ELBARON duct air filters with low maintenance costs. All our electrostatic filter cells and filter media are effortless to clean and reuse.

Condition: new, Year of construction: 2023, Automate your cleaning process with devices from the Superior series: lifting device with a support grid for effortless handling of parts, filter systems for dirt separation, an exclusive oil separation system (OPS), and an intuitive touch panel. Standard models are available from 150 L to 8000 L. Bwedpfef E Nt Dox Aknjw TECHNICAL CHARACTERISTICS External dimensions of the machine: 2,140 x 1,540 x 1,720 mm Internal dimensions of the tank: 1,300 x 794 x 670 mm Usable dimensions of the parts grid: 1,270 x 685 x 470 mm Maximum load: 400 kg Height of the worktop: 980 mm Tank capacity: 692 L Power of the ultrasonic generator: 4,800 W Ultrasonic operating frequency: 28 kHz Heating element: 12 kW

Condition: ready for operation (used), Cooler Guntner Type: S-GGN 066C/27 Cooling capacity: 40 kW at DT8 Fin spinning: 7 mm Place for electric heaters Fans: 2 x 660 mm Rpm: 870/650 Dimensions: 3050 x 700 x 1100 mm Refrigerant: Glycol Volume: 54.8 L Bwjdpfx Aehz T Igjknew Weight: 275 kg Pieces in stock: 4 Reference number: CH259 Condition: Used We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: used, Year of construction: 1993, Overview Bwsdpfjyb Sxaex Aknow This Klinger BC 16/1 bottle washer was manufactured in 1993 by the german manufacturer Klinger and is designed for cleaning returnable glass bottles. The machine is made entirely of stainless steel and equipped with modern cleaning, dosing, and control features ensuring reliable operation and excellent hygiene results. The washer is in good working condition. Suitable for multiple glass bottle formats used in beverage filling lines. Technical Data - Manufacturer: Klinger - Type: BC 16/1 - Year of manufacture: 1993 - Application: Returnable glass bottles - Material: Full stainless-steel construction - capacity: 20.000 bottles/h Features - Complete stainless-steel construction - Steam extraction system - Finger infeed and finger discharge - Chemical dosing system - Rotating spray pipe system - Lauer control panel - Conductivity measurement - Stainless-steel filter inserts - Plate heat exchanger - Compatible with standard bottle formats

Condition: like new (used), Year of construction: 2008, operating hours: 61,300 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, pressure: 2,429 bar, Here we are offering the following well-maintained used injection moulding machine as part of our injection moulding machinery trading business. Of course, we are also actively purchasing well-maintained injection moulding machines from model year 2010 onward. We have been a wholesale dealer of injection moulding machines for over 25 years. ++++From Pharmaceutical Cleanroom Production++++ Manufacturer: KraussMaffei Machine type: KM 120-380 EX International size designation: 380 EX / 120 Machine no.: 61011287 Year of manufacture: 2008 Machine hours: 61,300 h Control system: MC5 Technical data - Clamping unit Clamping force: 1,200 kN Tie bar spacing H x V: 470 x 470 mm Platen size H x V: 780 x 735 mm Min. mould height: 200 mm Max. mould height: 450 mm Max. platen distance: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Centric ring for moving platen D: 160 mm Centric ring for fixed platen D: 125 mm Mould weight: 1,485 kg Technical data - Injection unit Screw diameter: 35 mm Stroke volume: 156 ccm Injection pressure: 2,429 bar Screw length: 23 l/d Screw speed: 289 rpm Plasticising rate: 27 g/s PS Free shot weight: 477 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions LxWxH: 6 m x 1.7 m x 2.19 m Total weight: 9,700 kg Equipment Display language German Display language English +++Extras++++ Automation: Handling unit / extraction robot included – Handling: LR 100-2300 Conveying equipment: roller conveyor included CE marking: available Complete maintenance and inspection history Full latest test report Incl. conveyor belt, incl. cage Machine with water battery Machine without material hopper Levelling elements EUROMAP 12 interface Electrics Schuko socket 10A CEE socket 16A Voltage: 400 V Frequency: 50 Hz Motor current: 80 A Bedpfey D Adtex Akneww Warranty Warranty up to first commissioning Loading / Shipping Free loading onto buyer's truck or free delivery within Germany subject to freight reimbursement Available ex stock Hanover, Germany

Condition: used, Evaporator Guntner -Type: S-GHN 071.2H/27-EHS50.E -Cooling capacity: 50 kW at DT8, 40.2 kW at DT7 -Fin spinning: 7 mm -Fans: 2 x 710 mm -Dimensions: 3500 x 1060 x 970 mm -Electric defrost -Refrigerant: Freon -Volume: 71.5 L -Weight: 387 kg -Quantity in stock: 4 -Reference number: CH 605 -Condition: Used in very good condition, evaporator 100% tight under nitrogen, fans working, ready to work Bwedpjzaz U Ijfx Aknew

Condition: used, Evaporator Guntner -Type: S-GHN 071B/27-E -Cooling capacity: 39.7 kW at DT8, 31.5 kW at DT7 -Fin spinning: 7 mm -Fans: 2 x 710 mm -Dimensions: 3530 x 850 x 1150 mm -Electric defrost -Refrigerant: Freon Bsdpeza D Ukefx Akneww -Volume: 54 L -Weight: 317 kg -Quantity in stock: 2 -Reference number: CH 606 -Condition: Used in very good condition, evaporator 100% tight under nitrogen, fans working, ready to work

Condition: good (used), Year of construction: 2009, 1. Heavy-duty trailer for long goods GÜNTER VB BG 5351, year of manufacture 03/2009, load capacity 3000 kg, in good condition. Length min: 5500 mm, max: 6850 mm, width: 2200 mm, height: 575 mm, with forklift hitch, eyelet 40 mm. Tare weight: approx. 750 kg. Bsdpfx Akey Ti Eijnsww

Condition: ready for operation (used), Deutronic DX 3000 / 3-CAN-60-DIV built-in power supply, condition: 1, serial number: 9122080016 / input: 400-500 V~ / 45-65Hz, output: 0-60 VDC, 0-50 A, used, in good condition, 100% fully functional, scope of delivery as shown in the photos. Bwjdpfxjy Rckms Aknew