Used Riveter for sale (95)

Condition: good (used), Hang 150 3P Double-Head Riveter for Binders Manufacturer: Hang Germany Machine has been overhauled and is ready to use. The machine is used for riveting all types of ring mechanisms. Two riveting heads with adjustable spacing. Cardboard thickness: 0.2-4mm Throat depth: 310mm Head spacing: adjustable from 35-440mm Cycle time: 0.5s Prodpfx Aasxk U Eyohjc Weight: 570kg Power supply: 380V The cycle is initiated by a foot pedal.

Condition: used, Year of construction: 1990, Type/Designation: 307-153/714-750 Serial Number: 82/293 Country of Manufacture: Made in West Germany (before 1990) Technical Data (approximate, for this type of CHIRON machine from the 1970s/80s): Machine Type: Column drill / single-station drilling machine for metal Motor Power: typically from 1.5 kW to 3 kW (three-phase, 380 V) Spindle Speeds: 100 – 4000 rpm (mechanically or electrically switched) Max. Drilling Diameter in Steel: approx. 20–25 mm (depending on the version) Spindle Taper: usually MT2 or MT3 Feed: manual or mechanical (some models equipped with automatic feed) Weight: several hundred kilograms (approx. 300–600 kg) Intended Use: serial production in industry (precise hole drilling, light milling operations in metals, use in production lines) Machine Table: cast iron, capable of securing workpieces Full control panel – variable speed adjustment available 2. Key Working Head Parameters (important for riveting): Press Force (kN) – if specified on the cylinder label or in the electrical box (often 10–30 kN for this size) Spindle/Slide Stroke (mm) – measure from top to bottom position Daylight (working clearance: distance between tool tip and table at top position) Throat Depth – from spindle axis to column (working reach) Max. Rivet Diameter / Work Range – specify based on tests or prior use Voltage: usually 380/400 V, 50 Hz 3. Dimensions and Logistics: L×W×H (of base/overall, in cm) Electrical Supply: 3×400 V, protection e.g. C16–C20 (indicate according to power rating) Prjdpfx Aajw T U Ubshoc Weight (weigh with pallet jack with scale or estimate)

Condition: excellent (used), Tucker Nimak MF180: Robot welding guns for single-sided resistance spot welding The robotic welding guns for single-sided resistance spot welding from NIMAK work with state-of-the-art medium-frequency transformers, a control unit with adaptive welding current control and finely adjustable welding cylinders for gentle power. The right amount is needed to reliably join materials without deforming them or leaving marks on the visible side. or leaving marks on the visible side. Our systems master this task perfectly. Tucker Stanley C-clamp self-pierce riveting tool With Tucker® SPR equipment, you can join materials that cannot be easily welded, including aluminum-aluminum, aluminum-steel and high-strength steel, by combining two technologies in one modular system: Self-pierce riveting with semi-tubular rivets and solid self-pierce riveting. AEG SVS Schweisstechnik Electrode milling unit EF310-01E-S-D-Fix Milling of spot welding electrodes Automatic rivet feed With controller: The brain of every SPR system. Psdpjrqfk Ajfx Aahjrc It manages, thinks, remembers and communicates in an Industry 4.0 environment The lung - Small, quiet and fast rivet feeder for your SPR tool. Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, machine/vehicle number: 7006, Nietmaschine - Riveter Stocko WP 100 b Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Psdorgb Amepfx Aahorc

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 00026, overall weight: 400 kg, Specifications: 8 bar 24 V 80 kN 3 K Pedpfxewrp Ius Aahsrc 150 E The Arnold & Shinjo / Multipower Farger & Joosten C-Press is a powerful and versatile hydropneumatic riveting press, ideal for efficient and precise joining of components. Thanks to its robust design and reliable hydraulic technology, it allows for high force transmission in various riveting tasks, making it a valuable solution in manufacturing and assembly. The press stands out for its ease of use and flexibility, so it can be used in different production processes.

Condition: used, Year of construction: 1966, shaft length 15 - 130 mm wire diameter 6 - 12 mm length of wire blank max. 170 mm capacity/output with closed mould, adjustable 100 /min Pjdpfx Aov Sva Ejahjrc capacity/output with open mould, adjustable 67 /min Weight 12,5 t dimensions of the machine (WxDxH) 2,3 x 4,0 x 1,6 m combined double-pressure cold header press for jaws and closed moulds maximum wire diameter for high tensile bolts und carriage bolts 10 mm maximum wire diameter for mild steel bolts and rivets 12 mm wire diameter range 6 - 12 mm minimum and maximum shaft length 15 - 130 mm maximum length of wire blank 170 mm capacity/output with closed mould, adjustable - 100 St/min capacity/output with open mould - 67 St/min power requirement 15,0 kW mould dimensions - jaw dimensions 54 x 54 mm

Condition: excellent (used), Year of construction: 2005, Yoshikawa US-66 riveting machine 5mm high spin manufacturer: Yoshikawa "Japan" Psdpfxjxlt Uij Aahjrc type: US 66 - Crimping ability (Mild steel rivet) φ5 mm or less - Spinning head: 5-40 mm - Distance between tabletop and punch: 90-285 mm - Table working surface size: 250x250 mm - Processing time setting range: 0.2-9 seconds - Normal pressure: (Varies depending on pressing conditions) 2-5 kg/cm2 Air consumption: Power supply and motor Three-phase 200V 0.12kw Machine size Width 330 x depth 610 x height 800mm Machine weight 95

Condition: used, functionality: unexamined, Hydraulic riveting machine. With 2 riveting hammers. Pjdjxrf S Hjpfx Aahsrc

Condition: new, Year of construction: 2025, Maximum equipment for the professional. Multiple combination with TERSA cutterhead, miter cutting device and swiveling milling spindle. Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved with the scoring saw blade installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside High-precision sliding carriage made of anodized aluminum on hardened and drilled steel guide rails Large boom (1200 x 650 mm) with roller and extendable aluminum telescopic fence up to max. 3300 mm Sawing unit swivels from 90° to -45 Pivoting milling spindle from 90° to -45° backwards into the milling fence Four milling speeds Right-left rotation of the milling spindle Quick change to thickness planer thanks to parallel opening jointer tables Predpfx Aascnxa Sehoc 2-stage feed in the thicknessing table Sharp toothed steel infeed roller for uniform wood infeed Three independent industrial motors With separate saw-parallel fence and separate feeder fence With lockable main switch Equipment details: Format fence Immediate control Boom Boom with angle-adjustable telescopic lay-off stop with graduation Sliding carriage with ball contact system made of anodized aluminum guides in hardened and ground steel F550S, 15% harder than conventional steel guides riveted and not glued light running, low noise and reliable 10 years HOLZKRAFT warranty on wear of hardened guideways cast iron double cradle saw unit height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts close to the saw blade, mounted on both sides height and inclination adjustable up to 45 standard scoring unit with separate scoring motor 0,55 kW double cradle scoring unit large-dimensioned swiveling double cradle milling unit made of cast iron milling stop heavy professional design the high quality cast iron fence is supplied with fine adjustment as standard 3-fold positionable for fast readjustment of the setting with fine adjustment via toothed rack, numerical display and aluminum fraise stop jaws Planer steel infeed rollers with helical teeth for a constant and uniform wood infeed solid backstops prevent the backstroke of workpieces 4-knife torsion shaft ensures an optimal planing pattern table lips for a quieter running Tersa planing cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Especially low noise Thicknessing table The thicknessing table is mounted on four large-dimensioned spindles, which ensure high stability under all working conditions. Due to the special lifting device, the table position is perfectly maintained even without locking. Rip fence with fine adjustment and quick clamping stable round bar guide made of ground steel reversible aluminum ruler no measuring gap, guide rods are overlapping Separate dressing fence large professional design (1800 x 150 mm) 0-45° swiveling with quick adjustment stable round bar guide made of ground steel simultaneous opening Art: No. 5500557

Condition: new, machine/vehicle number: c13a96854ea37997845c1bf36, empty load weight: 6,860 kg, maximum load weight: 28,140 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 235/75 17,5, Further information Chassis saddle forwarding Fine-grained steel welded construction, fifth wheel plate with replaceable 2 king pins Suspension strip for feeder ramps on the rear extension across the entire width, outer edge chamfered to prevent damage. Frame in reinforced design for vehicle loading (up to outer frame) Outer frame with Load-Lock profile approx. every 400 mm, for lashing strap attachment 10 pairs of lashing mushrooms embedded in the top/outside of the outer frame, 10 tons each, starting from the neck area 24 t. 2-speed support winch, single-side operation, with straight connecting plate 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Sheet metal as splash guard riveted to the floor at the bottom, in the neck area above the axle of the SZM and above the axle unit Half-shell mudguards with anti-spray flaps according to EG Container locking, 4 pairs of locking cut-outs embedded in the floor for 2 x 20 foot or 1 x 40 foot containers, 4 pairs of container locking adapters, (additional cross support required at the front and rear of the container, the container must rest evenly across the width in conjunction with the locks, cross supports are not included in the scope of delivery) Caution! Damage to the Lohrblech floor by the cross supports possible! Mechanical rear extension with hand crank, can be extended by approx. 1,500 mm, can be locked every 500 mm, incl. extendable underride guard with lighting, (then no access ladder at the rear) Covered with Lohr plate in the tramline area, steel checker plate in the middle. Attention! Ramp loading via rear only possible with rear extension in retracted position! Storage space for access ramps integrated in rear extension, can only be used if rear extension is extended 1000 mm - then excess length For transporting the ramps with the rear extension retracted - Storage space for ramps in FR on the right in front of the axles 1 pair of ramps 3,000 mm long, 300 mm wide, load capacity per pair 6,000 kg, (suspension bar for ramps on rear extension) Rear sloping to approx. 500 mm Electric cable winch, 24 volt, pulling force approx. 8165 kg, mounted centrally at the front, operation with radio remote control, cable length 35 m x approx. 10 mm, with roller rope window and removable guide rollers Axles + suspension Drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) with central lift arm Axle lift below the recomm. Driving height, therefore no warranty for tire damage Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 235/75 17.5 tires of the manufacturer's choice Pedpfjlf Dtmsx Aahjrc Steel rims in twin arrangement, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white LED position lights at the front 2 white/red rear lane departure lights 2 additional LED work lights at the rear, switched via reversing

Condition: used, throat depth: 610 mm, Pressing force (72 kN) with 610 mm dept Automatic lower tool changer with 4 stations Automatic upper tool changer with 4 stations Reliable and energy-efficient thanks to fully hydraulic system Equipped with patented safety system as standard Psdpfexfi Npsx Aahjrc Advanced control with touch screen and automatic press-in fastener length control Equipped with 2 * MAS-350 modular feed systems for press-in elements

Condition: used, Year of construction: 1988, pressure 40 t throat 350 mm material thickness max. 12 mm power requirement 2,2 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 0,8 x 1,5 x 1,9 mxmxm Wobbling / Riveting machine permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) maximum material thickness approx. 12 mm at 12 mm material thickness: stamping power (diameter) approx. 24 mm at 6 mm material thickness: stamping power (diameter) approx. 50 mm as is where is, WITHOUT putting into operation Pjdpfx Aaevut Dmsherc

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, input voltage: 220 V, throat depth: 172 mm, type of input current: three-phase, overall weight: 110 kg, operating pressure: 6 bar, input frequency: 50 Hz, power: 0.12 kW (0.16 HP), spindle stroke: 40 mm, table length: 250 mm, table width: 250 mm, Yoshikawa US-66 riveting machine 5mm high spin type: US 66 Prjdpewd Uf Nefx Aahsc - Crimping ability (Mild steel rivet) φ5 mm or less - Spinning head: 5-40 mm - Distance between tabletop and punch: 90-285 mm - Table working surface size: 250x250 mm - Processing time setting range: 0.2-9 seconds - Normal pressure: (Varies depending on pressing conditions) 2-5 kg/cm2 Air consumption: Power supply and motor Three-phase 200V 0.12kw Machine size Width 330 x depth 610 x height 800mm Machine weight 95 kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: not inspected (used), Year of construction: 1999, Built by ECKOLD as a special-purpose machine with a mounting for clinch riveting brackets. The unit is intended to be used as a component donor for a custom solution. Motor manufacturer: Behncke, 5.5 kW. Rated power: 8.5 kW. Hydraulic unit manufacturer: FluTec, year 1999. Predoxg Rkqspfx Aahec

Condition: good (used), Year of construction: 1970, Brand HILGELAND Type CH 5 ALL Year of build 1970 Pjdpou Szucefx Aaherc Serial number 5282 Electric connection 380V Dimension l 5500mm Dimension w 2200mm Dimension h 1900mm (screw and rivet), capacity : M6 - M14, cutting length max. 200mm, variable speed: ... up to pieces 90 p/min, diameter 16mm

Condition: used, functionality: fully functional, Year of construction: 2017, Type: AUTOMATIC RIVETING MACHINE Manufacturer: SICoM srl., Italy Model: MP1R-E Prodpfx Ajxgpgkeahsc Year: 2017 Automatic riveting machine, electric motor for rivets. The welded steel frame allows the setting of stainless steel rivets. The feeder, easily interchangeable allows to set every kind of rivets. All the functions are under the control of a microprocessor, a partial counter with reset and a total counter are available. Among the options a slow motion for TEST and a MULTIPLE SETTING to repeat a programmable sequence of a certain number of eyelets and the time between the setting. Techinical Features (please find broshure attached). Instruction and maintenance manual available on request. Throat depth 160mm Measures 450x500x1400mm Working cycle 0.35” Power supply 220V monof / single ph 400W Weight 70 kg

Condition: used, Year of construction: 1995, Technical details: throat: 1000 mm air pressure: 6,0 bar total power requirement: 5,0 kW weight of the machine ca.: 0,4 t dimensions electric cabinet LxWxH: 1,03 x 0,4 x 2,05 m dimension machine xH: 2,6 x 1,0 x 2,3 m Podpfsu Ictnox Aaherc AUTOMATIC DRILLING AND RIVETING MACHINE Application: automatic drilling and riveting of sheet metal parts. Features: - Rivet Ø 3.2 - 4.0mm, rivet length 6.0 - 10.0mm; riveting force = 40,000N. - Drilling: Speed up to 5,000 rpm, drilling feed 50 - 1,500 mm/min, stroke height 80mm. - Clamping: clamping force 50 - 400 daN, lower tool 75mm adjustable - Hydraulics: pressure 128 bar, supply 14 l/min, power 4 kW - Pneumatic: pressure 6 bar, supply 9,5 l/sec. - Operation via control panel or/and foot switch. Equipment: - side table - 8 oscillating conveying heads - hydraulic power unit accessories: - Tool cabinet, div. drill countersink, 2 closing heads, hold-down and other div. tools comparable in photo. *

Condition: good (used), Stock number: 2225 Manufacturer: AGME Spain Type: RR14 Year of construction: 2005 Machine number: 3815 Control unit: CU 301 Table: 350 x 300 mm Riveting capacity max.: 14 mm diameter Stroke: 5 to 50 mm adjustable Pjdpjrhza Sjfx Aahjrc Distance table-head: 60 to 270 mm Air connection: 6 bar Riveting force: 1,880 daN Riveting time: 0 to 5 sec adjustable Projection: 180 mm Equipment: 5-fold riveting head, two-hand operation; Connection: 1.6 kW Dimensions: 500 x 720 x 1,200 mm Weight: 0.3 t Condition: tested, ready for use

Condition: excellent (used), functionality: fully functional, Brother Hi-Spin riveting machine 5mm high spin Type: BR1-103 - Crimping ability (Mild steel rivet) φ5mm or less - Spinning head: 20-40mm - Distance between tabletop and punch: 60-180mm Podpfx Aaswdwv Reherc - Table working surface size: 310 x 180mm - Processing time setting range: 0.3-5 seconds - Normal pressure: (Varies depending on pressing conditions) 2-5kg/cm2 Air consumption: Power supply and motor Three-phase 200V 0.2kw 4Pole Machine size Width 390 x depth 510 x height 1000mm Machine weight 95kg

Year of construction: 2011, condition: used, Toxi Press TOX-Clinch-unit TZ including EPMR-drive & electrical cabinet very good condition Robot tool Typ:  TZ 05.422289 weight: 121kg Max Kraft 52kN complete system Typ: STE 606-006-125 3,4kW 125 mm/s power 400V Prodpjdq E Eiefx Aahjc Press Typ: EPMR 055.034.100.000 including Schematic diagramm You get everything as shown. Including electrical cabinet. Attention: the cables to connect the clinch unit and the electrical cabinet are not included

Condition: ready for operation (used), General Location Kundl (Austria) Condition used Tank volume 118,000 liters Vacuum 0.25 bar Max. Overpressure 0,99 bar Floors dished bottom Construction form upright Stand frame Psdpel Avmcefx Aaherc Insulation insulation available insulation jacket riveted Technical data / dimensions Diameter inside 4,410 mm Diameter outside 4,700 mm Cylindrical height 6,500 mm Total height 10,860 mm Equipment Technical documents Drawing Manhole / dome in cylinder, in top Type plate Outlet Flange DN100 Material Properties Material in contact with product V4A 1.4571 (AISI316)

Condition: used, Year of construction: 1988, Type: Riveting machine Manufacturer: ARNO Maskiner AB, Sweden Prodpjxgpftsfx Aahoc Model: 1304 Year: 1988 Condition: fully working

Condition: used, Year of construction: 1990, Technical details: Pressure: 63 t distance between columns: 200 mm stroke: 150 mm dayligth: 430 mm no. of strokes: 400 Hub/min T-slots H 12 650: 18 mm hole in table: 420x160 b x l mm ram surface area: 650 x 450 mm control: Wanske Tronicpress CNC passage of columns: 550x540 mm tank: 200 l stroke of ram - fixed: 100 mm ram diameter: 40 mm table height over floor: 1000 mm Pedpfx Asu Icxqeaherc table: 600x450 mm table height over floor with metal base stand: 880 mm total power requirement: 30 kW weight of the machine ca.: 3,9 t Hydraulic automatic punching press for precision work (high-speed press) - for punching, drawing, pressing, minting, bending, riveting, straightening, assembling - with hydraulic gripper feed type HS 150 and 7-roller straightener (moving) - Normal strips of approx. 0.4mm - 2.5mm thickness x approx. 160mm width, as well as narrow strips up to approx. 4mm can be processed. Feed length can be adjusted as required via the control unit. - with ram round column guide - with automatic central lubrication - High-speed: up to 400 strokes min-1 - motorized adjustable fixed stop (bottom can be adjusted by hand/motorized) - Operating modes such as continuous stroke and/or single stroke Equipment: - 1x hydraulic unit - 2x control cabinets *

Condition: used, Technical details: Pressure: Hebelkraft t throat: 115 mm work stroke: 15 mm Podpfx Aaevc Au Rshorc work height max.: 1050 mm weight of the machine ca.: 55 kg dimensions L x W x H: 780 x 300 x 1360 mm AS GOOD AS NEW Conventional riveting machine, bolted steel casting with welded construction. Application for: rivet connections e.g. tubular rivets machining further details of the machine: - stamp holder Ø 11,5 x 15mm - ram Ø 25mm - distance 70mm - Countersink: Drill diamter Ø 11.5 mm continuous, intake is currently mold piece operation is via a foot lever with return spring size of the base plate L: 380 x W: 300 mm with 4 drill holes *

Condition: used, Technical details: shaft length: max. 30 mm capacity: 600 ST/min wire diameter max.: 5 mm working dimensions: 30 mm dimensions electric cabinet LxWxH: 1,45x0,55x2,1 m dimensions of machine: 2,95x1,5x2,15 m dimensions of coil: 1,15x1,15x1,15 m Orbital Cold Forming Machine! - Not not suitable for screw production!!!!! - mechanic cold flow press / machine is unused!!!! - Steel core bullets - Rivets (almost all types: flat rivets, punch rivets, precision rivets, flat head rivets, etc. -----à not for manufacturing semi-hollow rivets, because you will need 2 forming stages, model KEPK - 1 however only has 1 forming stage. - bolts - Pins, chain pins (short) - Lead sheath-weighting for bullets (with straight frames front and rear) - plant like new / never used! accessories: - coil, manual Machine can be demonstrated under power. Predpfxju Nfrco Aahec Please send us your enquiry what you are going to manufacture with that machine. You can also send us a drawing in order to check it if it is possible. *