Used Rivet Header for sale (199)

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801013475, empty load weight: 7,180 kg, maximum load weight: 28,820 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: silver, available in multiple units Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin, additional splash guard riveted to the underside as a sheet of metal, in the neck area above the rear axle of the semi-trailer and above the wheels on the vehicle, frame in reinforced design for vehicle loads up to the outer frame, outer frame with "Load-Lock profile" approximately every 400 mm for securing lashing straps, 10 pairs of lashing rings embedded in the top/outside of the outer frame, each rated at 10 tons, 24 tons. Two-stage support winch, single-side operation, with semi-circular lower part and straight connecting plate, with stroke compensation, folding rear support, support wedges with holder, aluminum side impact protection, steel under-ride protection, quarter panel fenders in front of and behind each axle, with additional sheet metal splash guard above the wheels, with anti-spray flaps according to EC regulations, 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable, container locking system, 4 pairs of locking recesses embedded in the floor for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters, (additional transverse support required at the front and rear of the container, the container must rest evenly over its width in conjunction with the locks, transverse supports are not included in the scope of delivery), attachment rail for loading ramps at the rear extension over the entire width, rear extension mechanical, with hand crank, extendable by approximately 1,500 mm, lockable every 500 mm, including under-ride protection with lighting that can be extended, in the wheel well area with Lohr sheet metal, center with steel diamond plate, storage space for loading ramps integrated in the rear extension, usable only when the rear extension is extended by approximately 1000 mm, for transporting the ramps with the rear extension retracted - storage space for ramps in the FR, located to the right in front of the axles. 1 pair of ramps, 3,000 mm long, 300 mm wide, load-bearing capacity per pair 6,000 kg, electric cable winch, 24 volts, pulling force approximately 8165 kg, mounted centrally at the very front, operated with a wireless remote control, cable length 35 m x approximately 10 mm, with roller cable guide and removable guide rollers. Axles + Suspension: SAF/BPW drum brake axles, at the manufacturer's choice, air suspension, 1st axle automatic lift axle, additionally electrically operable from the truck, including forced lowering and starting aid. Braking System: 2-line pneumatic braking system, color-coded line routing for easy servicing, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, EBS, electronic braking system with EBS socket at the front, without connection cable, with raising & lowering valve with quick vent, holding function in lowered position + auto-reset function, vehicle stability system, axle load recognition via EBS-CAN bus signal. Nedpfoza Aiyjx Aa Uswk Wheels and Tires: 235 / 75 R 17.5", manufacturer's choice, steel rims in twin arrangement. Electrical System: 24 volts, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear in LED, 2 x 7-pole and 1 x 15-pole tamper-proof sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, double LED illuminated and

Condition: not inspected (used), machine/vehicle number: 217403, GIRO net packaging machine, type Girplus RS Classic Attractive appearance due to the central message on the pack header. Possibility to make the header with 1 or 2 flaps (see Picture 1) or without flaps (see Picture 2) Possibility to include or not include handle holes. Nwodpfxog H Tc Ss Aa Uok Allows the use of registered Girfilm at both, one or none of the sides. Flexibility to utilize 90 or 119mm header width Handles up to 3kg without needing inner or outer reinforcement bands. 100% recyclable. Net and film are fully made of polyethene. No additional raw material is used. Uses the same consumable materials for all different packaging styles. Thus affording the packer a stock cost-saving and facilitating stock management. Allows the use of self-adhesive labels up to 78 x 36 mm The Girplus-R welding machine offers the packer the possibility of making different bag styles with just one machine. RECOMMENDED CONSUMABLES FROM 1,0 KG TO 3,0 KG PACKAGES Weight 1kg to 2,5 kg - NET GC-80-46-2625 and GC-92-46-R4-2225 and GC-104-46-R4-1923, Film width 119 mm film thicknesses 450gg Film length without flap 87 mm. (65 headers + 22 bottoms) or 143 mm. (121 headers + 22 bottoms) Label: 78 x 36 mm. Weight 3 kg – NET GC-80-46-2925 and GC-92-46-R4-2225 and GC-104-46-R4-2025 Film width 119 mm film thicknesses 450gg Film length without flap 87 mm. (65 headers + 22 bottoms) or 143 mm. (121 headers + 22 bottoms) Label: 78 x 36 mm. Power supply: 380 V, 16 A Video with our machine in the link below: Price Euro 2.500 Euro + VAT, Ex Works Loaded of FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2019, operating hours: 1,370 h, condition: excellent (used), functionality: fully functional, OKUMA GENOS L-3000 - for powerful cutting and long tool life for all batch sizes thanks to flat guides and heavy turret design TECHNICAL DETAILS turning diameter over bed: 520 mm Machinable turning diameter: 300 mm workpiece length: 450 mm traverse paths X / Z: 235 / 520 mm C axis: 360 / 0.001 ° Control: OKUMA OSP-P300LA-e rapid traverse X / Z: 25 / 30 m/min riveting stroke: 400 mm spindle speed: 38 - 3800 rpm spindle mounting: A2-8 spindle bore: 80 mm diameter spindle bearing: 120 mm tool holder: M-V12 with 12 places tool size: 25 x 25 mm tool diameter: 40 mm Tool speed: 45 - 4500 rpm switch-on time: 5267 h control time: 1919 h Spindle time: 1370 h MACHINE DETAILS dimensions L x W x H: 2545 x 1870 x 1791 mm Weight: 5000 kg Nwjdpfx Asnt T Afsa Usk Spindle power (20 min/continuous): 22 / 15 kW Spindle torque: (20 min/continuous): 412 / 281 Nm Tool power (30 min/continuous): 7.0 / 3.3 kW Tool torque (30 min/continuous): 23.7 / 14.2 Nm

Year of construction: 2018, operating hours: 1,256 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2189, OKUMA LB3000EX-II - is particularly suitable for universal turned parts and complete machining of complex workpieces thanks to generous flatbed guides and the high-torque drives ensure high precision and continuous accuracy TECHNICAL DETAILS turning diameter over bed: 580 mm Machinable turning diameter: 340 mm workpiece length: 950 mm traverse X / Z / Y: 230 / 510 / 120 (+70/-50) mm C axis: 360 / 0.001 ° Control: OKUMA OSP-P300LA rapid traverse X / Z / Y: 25 / 30 / 12,5 m/min riveting stroke: 1015 mm spindle speed: 4200 rpm spindle end piece: JIS A2-8 spindle bore: 91 mm diameter spindle bearing: 140 mm tool holder: M-V12 with 12 places Nedpfxjnt T Auj Aa Uewk tool size: 25 x 25 mm tool diameter: 40 mm tool change time: 0,1 s Tool speed: 45 - 6000 rpm Operating hours: 1.256 h Control on: 1.660 h MACHINE DETAILS dimensions L x W x H: 3420 x 2041 x 2444 mm weight: 6600 kg Supply voltage: 400 V, 3 phases, 50 Hz Power drawn: 38,9 kVA Spindle power (30 min/continuous): 30 / 22 kW Spindle torque: (30 min/continuous): 700 / 512 Nm Tool power (25 min/continuous): 7.1 / 4.1 kW Tool torque (25 min/continuous): 40.4 / 23.4 Nm Note: The WTOH hobbing tool holder (see document in the appendix) is not part of the scope of delivery.

Condition: good (used), Year of construction: 1970, Brand HILGELAND Type CH 5 ALL Year of build 1970 Serial number 5282 Electric connection 380V Dimension l 5500mm Dimension w 2200mm Njdpfxsu Szucs Aa Uowk Dimension h 1900mm (screw and rivet), capacity : M6 - M14, cutting length max. 200mm, variable speed: ... up to pieces 90 p/min, diameter 16mm

Condition: new, Year of construction: 2025, functionality: fully functional, Pneumohydraulic, Pneumatic and hydraulic Presses 0,2T–50T – Efficient, Cost-Effective, and EU-Compliant! Nwsdov Snixjpfx Aa Ujk We offer high-quality pneumohydraulic presses with a pressure range from 0,2T to 50T, combining high efficiency, energy savings, and maximum workplace safety. Our machines fully comply with all EU regulations, including the Machinery Directive 2006/42/EC, and come with complete technical documentation and a CE Declaration of Conformity. Key Features of Our Presses: ✅ Powerful and precise – smooth operation with advanced pneumohydraulic technology ✅ Energy-efficient – lower energy consumption compared to traditional hydraulic presses ✅ Enhanced safety – customizable safety features (light curtains, protective covers, two-hand control) ✅ Flexible control systems – available in manual, semi-automatic, or fully automatic configurations ✅ Tailor-made solutions – we design and manufacture presses according to your specific requirements ✅ Versatile applications – ideal for stamping, punching, assembling, riveting, and bending ✅ Robust construction – built for durability and reliable operation in demanding conditions ✅ Complete documentation – each press is delivered with an operating manual, technical diagrams, and a CE declaration Our pneumohydraulic presses are the perfect solution for European industries, offering high productivity, safety, and full compliance with EU standards. 📞 Contact us today for a customized offer tailored to your needs! 📩 Feel free to contact us via email

Condition: used, maximum load weight: 36,040 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2025, next inspection (TÜV): 05/2027, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis: * Regular ladder frame in lightweight steel construction with continuous crossmembers * With extended chassis frame * Coupling plate approx. 8 mm thick, with a 2-inch kingpin according to DIN 74080 / ISO 337 * Axle lift mechanism on axle 1 * Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, offset 120 * Air suspension with approx. 180 mm travel Tires: * Wheels with internal sensors according to UN ECE R141 * Tires 6x 385/65 R 22.5 UNIROYAL TH 506, steel rims 22.5 x 11.75, offset approx. 120 mm * Chassis components: * Mechanical landing gear with leveling foot, approx. 24 t lifting capacity, single-sided operation on the right side * Storage box for: 10 side panels, folding stakes, and rear flap, completely enclosed, protected against spray water, and simultaneously serving as lateral protection * 2 plastic toolboxes, waterproof, dimensions (internal) approx. 545 x 400 x 400 mm, mounted at the rear, 1x left and 1x right Braking / Air Suspension System: * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS connector ISO 7638 (without connecting lines) * Parking brake as spring brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 connector * WABCO EBS system * Air suspension system including 1 raising and lowering valve, mounted on the left side behind the axle unit * Driving position is automatically adjusted * 2 non-interchangeable coupling heads at the front ISO 1728 * Air tanks for braking system and air reserve made of steel (EN 286-2) Floor: * Plate floor approx. 30 mm thick, multiple-ply glued plywood * Floor sealed around the perimeter * Pocket for square tube inserts approx. 80 x 80 mm Front wall: * Storage for max. 14 square tube inserts approx. 80 x 80 (length 1,990 mm) on the inside of the front wall * Approx. 2,000 mm high with steel corner posts, with profiled steel sheet, screwed/riveted to the frame * 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front wall according to EN 12640 * N o t e: When using the front wall for securing the load, suitable lashing straps must be used for tensioning if the vehicle is operated without side panels and a rear flap Rear wall: * ATTENTION: Hinge mount for folding rear wall 600 mm as well as stake mount for folding corner stakes at the rear, however, the folding rear wall and corner stakes at the rear are OMITTED. Side wall: Nodpey Trwuofx Aa Ujwk * VarioFix steel outer frame, 4 pairs of stake mounts for folding stakes on the outer frame (evenly distributed), WITHOUT folding stakes, pair of lashing brackets in the outer frame (according to EN 12640), permissible tensile force approx. 5,000 kg per ring. Side panels: * ATTENTION: Hinge mount for 5 pairs of side panels on the outer frame as well as side panel stop mounted on the corner posts at the front, however, the 5 pairs of side panels are OMITTED. Electrical system / Electronics: * Lamp carrier made of steel, arranged above the underrun protection * KÖGEL LUXIMA Premium package, consisting of: LED license plate lighting, LED marker lights and reflectors at the front, flashing LED side marker lights, Superseal and bayonet connectors for the lights * 2 LED outline lights with pendulum bracket * 2 multi-chamber tail lights *

Condition: excellent (used), Year of construction: 2007, operating hours: 10 h, machine/vehicle number: 103414, High-performance automatic production line for ring binders. Sheet feeder (vacuum feeder), creasing station, gripping hole punching unit (finger hole eyeletting machine), double riveting station, operator control panel (Fanuc QuickPanel View), mechanical feeding unit, single riveting station, folding station. Cover height: 120 – 400 mm; cover width: 300 – 820 mm; material thickness: min. 1 mm – max. 3.5 mm; rivet spacing: 90 – 300 mm. Nwedpfxox Apb He Aa Uek

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 84KB2, Progressive header SACMA SP.240 Fully functional, operational, ready to produce Available for any test Technical information: Number of dies: 3 Heading tonnage: 550 KN Maximum cutoff diam (500N/mm²): 10,5 mm. Nsdpfx Aajy Nx Hbj Uswk Max. cutoff length: 85 mm. Kickout stroke die max.: 65 mm. Kickout stroke punch max.: 20 mm. Speed pcs. per minute: 275 Power of main motor: 22,5 KW Diam. dies: 54 mm. Length dies: 90 mm. Diam. punches: 38 mm. Net weight: 10.600 kg. Gross weight: 12.300 kg. Condition: very good, operational Year: 1990 Ready for immediate delivery Machinery runs without any problems. Available c/o HBR srl - Calolziocorte (LC) Italy

Condition: used, Prakma book cover rounding machine ( Case Rounding machine) Very good condition, full function. Various rounding radii available. Nodpfx Aasty Tr Es Uswk Other machines available (riveting machine, eyeletting machine, bundling machine, corner rounding machine, drilling machine, stitching machine) More machines on stock. Price plus VAT. EXW. All information without guarantee. Subject to prior sale. Dealer transaction. The sale takes place under exclusion of any warranty.

Condition: used, Year of construction: 2018, operating hours: 2,260 h, power: 368 kW (500.34 HP), front tire size: 710/70R42, rear tire size: 500/85R30, Equipment: air conditioning, cabin, Equipment: / All-wheel drive, autopilot, on-board computer / monitor, / automatic climate control, electric adjustable counter-blade, / yield measurement, cab, performance monitor, / maize header, metal detector, kernel processor, / radio, row-independent, rotating beacon, / Sch Njdpfx Aajy Hdqye Ujwk

Year of construction: 2011, condition: used, Toxi Press TOX-Clinch-unit TZ including EPMR-drive & electrical cabinet very good condition Nwodpfxjdq E Eie Aa Uok Robot tool Typ:  TZ 05.422289 weight: 121kg Max Kraft 52kN complete system Typ: STE 606-006-125 3,4kW 125 mm/s power 400V Press Typ: EPMR 055.034.100.000 including Schematic diagramm You get everything as shown. Including electrical cabinet. Attention: the cables to connect the clinch unit and the electrical cabinet are not included

Condition: used, Year of construction: 2013, operating hours: 1,580 h, power: 257 kW (349.42 HP), front tire size: 680/85R32, rear tire size: 540/65R30, Equipment: air conditioning, cabin, HID & header extremity lights / fire-charged Deutsch / ProDrive 20km/h / concave UNI E with W.DEAWN / dual-range cylinder drive / . / cleaning shoe sieve / fan floor protection shield / clean grain P / clutch / FENS Nwjdpfx Aoy Em Ryja Usk

Condition: used, Selling various small machines from old stocks. Nwodern Syxspfx Aa Ujk The following machines are available: Welding machines grooving machines riveting machines Punching machines pumps The pictures are only a small excerpt

Condition: new, functionality: fully functional, overall weight: 2,500 kg, total length: 4,200 mm, total width: 2,500 mm, total height: 2,170 mm, travel distance X-axis: 390 mm, controller manufacturer: Siemens, controller model: 840D sl + ShopTurn mit „manual machine“, turning diameter over cross slide: 370 mm, bed width: 433 mm, center height: 315 mm, center width: 2,000 mm, quill diameter: 100 mm, quill stroke: 200 mm, rapid traverse Z-axis: 8 m/min, rapid traverse X-axis: 8 m/min, spindle bore: 140 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2 rpm, turning diameter over bed slide: 630 mm, Equipment: rotational speed infinitely variable, Swing over bed: 630 mm Center distance: 2000 mm Maximum speed range: 2500 rpm Spindle power (100% duty cycle): 20 kW (AC drive) Spindle mount: Camlock D11 Spindle bore: 140 mm Included equipment includes: Nodpfewgbuiex Aa Ujwk - 8-station SAUTER VDI-40 turret - Movable control panel along the entire length - Chip conveyor - Siemens AC servo motors - Siemens power supply and amplifier modules - Automatic (or via M function) gear change (2 speeds) - Machining area covered by two sliding doors - Operating mode 1 and operating mode 2 (setup mode at 5 rpm) - Siemens 840D sl ShopTurn control system with "manual machine" - 15-inch touchscreen format 16:9 - With manual machines, cycles can be executed without creating a program header. - Siemens control option: residual material detection. - Absolute encoder (i.e., no reference point travel required). - USB interface on the control panel. - Manual tailstock with drag device and 100 mm spindle diameter. - Automatic central lubrication. - Coolant system.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 063/09, thread length: 50 mm, workpiece diameter (max.): 6 mm, SMART MACHINERY NG S-DD Thread Rolling Machine Fully operational, currently in production. Year: 2009 Nsdpsyycr Nofx Aa Uewk Incoterm: EXW Calolziocorte (LC) The machine automatically sets up for stroke change. The NG S-DD thread rolling machine is equipped for changing the ram stroke depending on the length of the comb used. Minimum pass-through diameter: 1 mm. Maximum pass-through diameter: 6 mm. Maximum threaded length: 50 mm. Maximum rivet length: 80 mm. Maximum output: 700 pcs/min. Main motor power: 13.9 kW Installed electric power: 16 kW

Condition: used, Year of construction: 2011, front tire size: 650/75R32, rear tire size: 480/80R26, Reinforced floor plate Automatic cutterbar speed control Automatic reel speed control 2 short / stalk dividers Upper grain splash guard Zürn rapeseed header cutterbar / Performance package Univeral concave electric sieve adjustment Semi-automatic / trailed pre Njdjt Etq Rspfx Aa Uowk

Condition: excellent (used), MyRef MY-ZB26-TFD refrigeration unit MyRef MY-ZB26-TFD condensing unit suitable for refrigeration applications Typical applications are Freezer cabinets in supermarkets and minimarkets cold stores Beer cellars Milk cooling systems Standard equipment Copeland Scroll M compressor ZB series with sound insulation hood Oil sump heater Liquid receiver with burst protection Filter dryer Sight glass visible from outside Ball shut-off valves Component-tested combined HP/ND safety pressure switch Electrical equipment: IP 55 switch box, compressor contactor, DIN rail mounting Condenser is integrated and protected in the housing Condenser fins coated with epoxy resin phenol (gold paint*) High-quality housing: solid in 1.5 mm galvanized and powder-coated sheet steel, base plate and feet in 2 mm sheet steel Frame construction with individually removable panels; all screws and components can be accessed from the front with minimal effort Blind rivet nuts with carriage bolts for secure, durable fastening without rust problems Pressure-controlled speed regulator with EMC filter Space-saving installation of several units next to each other possible; required mounting distance 25 mm Type: MyRef -ZB26-TFD Copeland Scroll Condensing unit Type: MyRef -ZB26-TFD Built-in compressor type: ZB19-KQE-TFD-525 Sound pressure level: 39 dbA-10 m Collector volume: 6 liters Air volume: 4500m³/h Cooling capacity: 9 kW Voltage: 400V,3PH,50Hz Power consumption: 8.9 A Dimensions: HxWxD 715 x 1120 x 450 mm Weight: 102 kg Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request! Nwedpfevtl T Dex Aa Ujk

Condition: good (used), Year of construction: 2014, Tecna 3484 Universal Spot Welding Station 8 kVA Universal welding station 8 kVA, manually operated gun, double program. Simultaneous connection of two tools with automatic recall of the corresponding welding program, saving time and avoiding errors in terms of simple and safe work flow. Body repairs: resistance spot welding of sheet metal, smoothing with dent spotter (nails and washers), local heating (carbon electrode), screw and rivet welding, dent removal of stainless steel sheet. Synchronous SCR welding control, setting of welding time in cycles and pulses, setting of welding current and compensation function. Mains supply: 400V Mains frequency: 50 / 60 Hz Fuse: 25 A Rated power at 50 %ED: 8 kVA Max. Welding power: 35 kVA Max. Secondary current: 6,4 kA Heat current 100 %: 0,88 kA Year: 2014 Weight: 85 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Nsdpfxsl Smn Se Aa Ujwk Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: new, empty load weight: 270 kg, maximum load weight: 1,030 kg, overall weight: 1,300 kg, loading space length: 2,510 mm, loading space width: 1,310 mm, loading space height: 400 mm, loading space volume: 1.3 m³, color: silver, construction height: 970 mm, working width: 1,850 mm, Hydraulics, Automatic reverse drive, Hot-dip galvanized, Unbraked, Folding front wall, Off-road tyres, Railing, Aluminium drop sides, * IMMEDIATELY AVAILABLE * Incl. folding front wall, off-road tires, railing, aluminium drop sides TECHNICAL DATA - Make: Humbaur - Model: HA 132513 KV Offroad - Vehicle type: Box trailer - Vehicle condition: New vehicle - First registration: Without first registration - TÜV/HU: 2 years from first registration - Internal dimensions (L x W x H): 251 x 131 x 40 cm - External dimensions (L x W x H): 379 x 185 x 97 cm - Loading height of floor: 55 cm - Perm. Total weight: 1,300 kg - Unladen weight: 270 kg - Payload: 1,030 kg - Chassis: Low loader (wheels next to the body) - Tires: 185R14C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted EQUIPMENT - Brakes: Yes - Number of axles: 1 - Floor: Wooden floor - Drop sides: double-walled anodized aluminium - Drop side height: 40 cm - Drop sides foldable: front + rear - Removable drop sides: Rear dropside - Dropside hinges: 2 at rear, riveted - Locks: Long lever locks, internal - Railing: Yes - Can be stored on edge : No - Number of pallet spaces: 3 - Tipping / lowering function: Without - Hydraulic pump: - - Overrun device/brake: ALKO - Frame/chassis: Steel side member, bolted - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, continuous, U-profile - Drawbar length: 120 cm - Folding drawbar: No - Mudguards: Plastic mudguards - Superstructures / attachments: Optional, attachable - Ramp shaft: No - Ramps/ramp flap: Optional - Ramp type: - - Ramp load: - - Drive-on angle: - - Supports: Optional, retrofittable - Lashing eyes: 6 - Rear lighting: bulbs, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC papers DESCRIPTION - Anodized double-walled aluminium drop sides - Screen-printed wooden floor, continuous without joint, slip-resistant and waterproof - Rear drop side foldable - Front drop side foldable - Long lever locks flush with drop side - Continuous side members - Frame compl. hot-dip galvanized - V-drawbar - plastic mudguards - insertion option at all 4 corners for tarpaulin frames, lattice attachment, dropside attachments or front wall elevation - 6 lashing brackets inside the side edge (certified 400kg/dAN) - maintenance-free rubber spring axle from ALKO - automatic reverse drive - ALKO overrun device and parking brake - 13-pin plug - return driving licence - parking brake - parking brake - parking brake. plug - reversing lights - generously dimensioned safety lighting - integrated rear fog light - lighting recessed in the rear frame - support wheel with clampAccessories can be retrofitted - please enquire: - Rear supports - High front grille - High tarpaulin - Side wall attachment - Corrugated grille attachment 60cm - Spare wheel - Storage box - Rear supports - Ramps - Flat tarpaulin - Additional lashing eyes - Slot-hole rails for tension belts & locking beams - Rod strip with rubber coating for tension belts & locking beams - Reversing lights - Lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - Nwjdpfxsu Htw Ue Aa Uek

Condition: excellent (used), Year of construction: 2020, operating hours: 829 h, Baader 588 Filleting Machine 2020, low hours, with spares Njdpoyq Sbyofx Aa Uowk Complete with IS026 Header Baader 61 knife sharpener 6 station trimming Line Infeeds/outfeeds, various conveyors Compressor Rare package!

Condition: used, Year of construction: 2015, functionality: fully functional, sheet thickness (max.): 2 mm, overall weight: 2,600 kg, total length: 1,000 mm, input voltage: 480 V, We offer this used Prinzing BEA2-S riveting and flanging machine, year of manufacture 2015. Type: BEA2-S Material thickness: 1.5 mm Length: 1000 mm Serial number: 1007 Nsdpjy Ev Smjfx Aa Uowk Year of manufacture: 2015 Weight: 2600 kg Voltage: 480 V Frequency: 60 Hz Power: 19.5 kW Current: 40 A The machine is already disassembled. If you have any questions or need further information, please don't hesitate to send us a message or call us.

Condition: good (used), Year of construction: 1997, machine/vehicle number: 24625, COLD HEADER CARLO SALVI 246/TR 2 Die 4 Blow Max. Cutoff Diameter: 8 mm Max. Cutoff Lenght: 75mm Nodpfx Aehn R E Iea Uewk Max. K.O. Lenght First Die: 85 mm Max. K.O. Lenght Second Die: 60 mm Max. K.O. Lenght (Punch Side): 10 mm

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 817, Complete Cold Heading Line (includes 3 machines) One Die Two Blow Header Max. Wire Cut-Off Diameter: 25 mm Nodpfotqu U Tox Aa Uewk Cut-off length: 300 mm Shaft Length Under head: 260 mm Extrusion machine Trimming machine