Used Road Rollers for sale (10,583)

Condition: used, Year of construction: 1997, machine/vehicle number: MR1TLL97037, - Manufacturer Cefla / Sorbini - Type T / 20-SP-1 - year of construction 1997 - Working width 1300 mm - working height 880 - 940 mm - Part height ~ 3 - 80 mm - Operating side right - Filler application cylinder ~250 mm Hjdpfoumvpfjx Agwsfd - Hard chrome-plated metering roller 174 mm - Hard chrome-plated smoothing roller 245 mm - Reverse drive - Belt transport - Belt control - Length ~ 1640 mm - width 2590 mm - height ~ 1700 mm - Feed rate 6 - 24 m/min - Total connection 4.5 kW - Weight 2,000 kg - With switch cabinet - Volt, Hz 400 / 50 - Location, not in stock

Condition: used, Roller transport Finnrose 3410mm - Producer Finnrose - Working width 1.400 mm - Diameter roller 65 mm - Roller pitch 100 mm - all rollers with rubber surface - Feed speed infinitely adjustable by hand wheel - Feed speed ca. 2 - 8 m/min - Length 3.410 mm - Voltage / HZ 400 V / 50 HZ - Location, in stock D-32825 Blomberg Hfedpfx Agjumvq Ajwjd

Condition: used, Year of construction: 2001, - Manufacturer Barberan - Type BRB-1400 - year of construction 2001 - Working width 1330 mm - Working height ~ 880 - 900 mm - Part height ~ 5 - 100 mm - Operating side right - Lacquer application roller ~45 Shore - Roller diameter 245 mm - Application cylinder speed 4 - 24 m/min - Quick-change system Application roller - Hard chrome-plated metering roller 174 mm Hfedjuyky Tepfx Agwod - Dosing roller Speed 4 - 24 m/min - Reverse drive - Solvent-resistant conveyor belt - Double diaphragm pump - Travelling on flanged rollers without - Feed adjustable via frequency converter 5 - 25 m/min - Length: 980mm - Width: 2.800mm - Weight 1,680 kg - Volt, Hz 400 / 50 - Location, in stock - Machine has been overhauled in 2022

Condition: used, - Manufacturer: Hackemack - Working width: 1300 mm - Roller diameter: 65 mm - Roller pitch: 100 mm Hfjdpfx Agexz Hb Uowsd - All rollers with rubber surface - Infinitely variable feed via handwheel - Feed speed approx. 2 - 8 m/min - Length: 1,900 mm + folding table 600 mm, 2,500 mm - Voltage, Hz: 400 V / 50 Hz - Location: In stock, D-32825 Blomberg

Condition: used, Year of construction: 2001, machine/vehicle number: 9646-11, - Manufacturer: Bürkle - Type: SLC - Year of manufacture: 2001 - Right-hand operation - For single-sided application of lacquer - Oscillating application roller squeegee Technical data: - Maximum working width: 1300 mm - Conveyor belt width: 1270 mm - Workpiece thickness 3 - 120 mm - Installation length: ~ 800 mm - Width: ~ 2,800 mm - 1 piece, rubberized application roller, approx. D: 238 mm - Application roller Shore hardness: 45 (can be changed) - 1 piece, chrome-plated metering roller, D: 174 mm - 1 piece, counterpressure roller, D: 186 mm - Transport speed, adjustable from approx. 6 - 30 m/min. - Working height ~ 900 mm - Passage height approx. 3 - 80 mm - Compressed air 6 bar, G1/4 inch, approx. 50 NL/min. - Operating voltage 400 V, 50 Hz, 3 phases - Total connected load approx. 2 kW Hedpfxeyifwio Agwefd - With control cabinet - Weight approx. 1,400 kg - Location: in warehouse 32825 Blomberg

Condition: used, Year of construction: 2014, machine/vehicle number: DB4078Q02A, The pictures show the machine in its unrefurbished condition. The offer price refers to a partially refurbished, functional machine. - Manufacturer: Cefa/Sorbini - Type: SMARTCOATER REVERSE MF-EVO - Two application units, one in REVERSE - Roller running directions shown in picture 10 Hodpfx Aeyatd Iegwjfd - Year of manufacture: 2014 - Working width: 1,300 mm - Working height: 880 mm - 940 mm - Workpiece height ~ 3 - 80 mm - Operating side: left - Paint application shaft 50 - 60 Shore - Roller diameter: 250 mm - Metering roller: 173 mm - Double diaphragm pump 1 piece for both application machines - Transport system with roller conveyor - Roller conveyor pitch: 150mm - Roller diameter: 100mm - Compressed air connection: 6 bar - Compressed air consumption: 54 NL/min. - Machine length 900 mm - Machine width 3,000 mm - Machine height 1,500 mm - Mobile on flanged rollers - Feed speed ~ 4 - 20 m/min - Application quantity ~ 4 - 50g/m² - Machine weight 2,520 kg - Control cabinet on the machine, traveling with it - With chassis - Total power 5.4kW / 30A - Volts, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Location: in storage

Condition: used, Year of construction: 2001, machine/vehicle number: 9646-27, - Manufacturer: Bürkle - Type: SLC - Year of manufacture: 2001 - Operating side: left - For single-sided application of lacquer - Oscillating application roller squeegee Technical data: - Maximum working width: 1.300 mm - Minimum workpiece length: 350 mm - Maximum workpiece weight: 250 kg - Conveyor belt width 1.270 mm - Workpiece thickness 3 - 100 mm - Machine length: 800 mm - Machine width: 3.200 mm - Application roller, rubberized, EPDM approx. D: 238 mm - Application roller Shore hardness: 45 (can be changed) - Metering roller, chrome-plated, D: 174 mm - Counterpressure roller, rubberized, D: 186 mm - Conveyor speed, adjustable from approx. 8-25 m/min. - Working height ~ 900 mm + - 30 mm - Clearance height approx. 3 - 80 mm - Compressed air 6 bar, G1/4 inch, approx. 50 NL/min. - Operating voltage 400 V, 50 Hz, 3 phases - Total connected load approx. 5.5 kW - With control cabinet Hfjdsykuzvjpfx Agwsd - Weight approx. 1.450 kg - Location: in stock 32825 Blomberg

Year of construction: 2014, condition: used, machine/vehicle number: DB407803A, Technical data: - Manufacturer: Cefla - Type: TR 3000 - With own control cabinet Hfedpeyatdzsfx Agwjd - Feed speed adjustment ~ 2,2 - 20m/min. - Emergency Stop - Display converter - Year of manufacture: 2014 - Transport length: 3,000 mm - Working width: 1,300 mm - Roller length: 1,450 mm - Working height: 900 +-20 mm - Roller diameter: 65 mm - Roller pitch: 125 mm - Adjustable feed (manual): 3-15 m/min - Installed power: 0.8 KW - Location: in storage

Condition: excellent (used), Conveyor System Offer for Conveyor System 1. Technical Specification of the Conveyor System • Length: 33 m • Width: 1.8 m • Drive: 6 motors, each 1.1 kW • Maximum load: 1 ton per m² • Chain drive • Centering units: 2 chain conveyors for centering goods in the middle of rollers • Construction: 5 sections of 6 m each and 1 section of 3 m Hodpfx Agjwpi Hfowsfd • Year of purchase: 2019 • Price: PLN 1,500 per meter • Includes: Complete conveyor system as specified above. Please provide a number in your reply to simplify contact, e.g. via WhatsApp.

Condition: good (used), Included in the delivery: 01x Standard separation bar, used Material color: Sendzimir galvanized Total length: approx. 2,440 mm Separation bar length: approx. 2,365 mm Total height: approx. 65 mm Separator height: approx. 38 mm Profile: 25 x 35 mm (H x W) Single-sided protective cap Weight per piece: approx. 2.19 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Hfodpfx Aeyk E T Nsgwsd General information about the item: This item is only offered for collection. Should transport or shipping be required, additional costs will apply. These can be queried separately with us, depending on the delivery location or scope of delivery.

Condition: new, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 8,550 kg, color: white, gearing type: automatic, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Fuso Canter 9C18 with day registration 06/2024 Remaining warranty until 06/2027 Technical specifications * 3L 129 kW / 175 hp EURO 6e * Automatic transmission * Wheelbase 3400 mm * Permissible gross weight 8.5T * Natural white Equipment (including): * Rear axle differential lock * Three-way tipper body 3600x2000x500 mm * Drop side unloading * Road box Hfjdsyq U Agjpfx Agwod * Automatic climate control * 2-DIN touchscreen radio with Bluetooth / hands-free kit / Apple CarPlay * LED main headlights * Hill-start assist * Reversing warning system * Driver airbag * Driver’s comfort suspension seat * Ball coupling tow hitch 12V, 3500 kg * Traction tyres Downrating to 7.49T possible Price incl. 19% VAT You will find further Fuso Canter and Multicar vehicles as well as various container sizes at: Leasing / financing / trade-in ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors Our general terms and conditions apply.

Year of construction: 1993, condition: good (used), motorised transport table with rollers and. var. speed dimensions L x W x H = 2950 x 1300 x 900 mm feed speed var. height adjustable +/- 15 cm max. weight load 50 kg/ m Hfedogvvn Espfx Agwjd Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2018, operating hours: 3,400 h, functionality: fully functional, mileage: 29,960 km, power: 80.17 kW (109.00 HP), fuel type: diesel, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, emission class: euro6, Equipment: cruise control, hydraulics, soot filter, HAKO Citymaster 2200 Municipal tool carrier with 3-brush sweeping and suction unit This Hako Citymaster 2200 was first commissioned in 2018, has only approx. 3,400 total operating hours / 2,018 hydraulic hours / 29,960 km according to the meter, and is in very good overall condition with the usual signs of use and wear. The machine has just received service and is immediately ready for operation. Comparable new price approx. €180,000! The sale is as a used machine with exclusion of return, warranty, and guarantee. - Net price €38,571 // Gross price €45,900 - Inspection / test drive available upon request Hedpfx Aeyrr T Eegwjfd - Nationwide shipping can be arranged; cost depends on distance! - We are happy to provide you with an attractive leasing or financing offer through our leasing partner!

Condition: good (used), 3 pieces Soco roller conveyor galvanized steel version with approx. 2 m length and 3 pieces with approx. 1 m length. Hodsh E Tn Depfx Agwofd -Usable width approx. 0.50 m. -Adjustable in height and inclination.

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: M166011 01 G21C, The LineLazer V 250SPS model with paint guns is a self-propelled solvent painting machine with reflective beads designed for large and heavy striping jobs, including painting parking lots and roadways. Pressurised bead system:  Excellent bead application performance  Ensures proper flow of beads Automatic paint gun system  Quality solenoid driven system Remote control control box  Easy to use and highly visible in all conditions 25 gallon paint tank  Less refills  Extended stripping time with high capacity hopper Honda® GX engine  Reliable and easy to start  Oil alarm stops engine to prevent damage if oil level drops too low Electric start  Quick start EasyMark gun adjustment system  Easy gun adjustments  Easy gun adjustment every time  2 gun capability with QuikSelect gun selector Hjdpfxet Dlmbj Agwjfd Use of front or rear holster Self-centering front wheel  Simple operation  Foam-filled, three-wheel design for stability Additional features  Easy steering adjustment  Durable Chromex pump  High efficiency hydraulic motor  High capacity cooling system  Easy Out pump filter

Condition: new, 3000 mm Working width 360 mm roll diameter 60,0 mm weight max. in kg 900 kg height adjustment 620 - 1055 mm weight 107 kg Furnishing: - Outfeed roller conveyor with stop - Optimal aid for supporting long and heavy workpieces - Roller support steplessly height adjustable and clampable - Safe workpiece support thanks to massive and heavy duty galvanized steel rollers Hfsdpfx Agexaai Aowod - Universally applicable for e.g. metal circular saws, Band saws, woodworking machines, ... - The roller conveyors consist of a stable Construction made of special profile - Problem-free and efficient material transport for the supply and removal of workpieces

Condition: new, 3000 mm Working width 360 mm roll diameter 60,0 mm weight max. in kg 900 kg height adjustment 620 - 1055 mm Hfedpfx Aoxaaf Djgwsd weight 66 kg Description: The RB 10 roller conveyor is a particularly practical aid for the support and movement of long and heavy workpieces. It can be used individually and expanded as required and through the retrofittable PVC-coated rollers can also be used for delicate materials. Furnishing: - Infeed roller conveyor - Optimal aid for the support of long and heavy workpieces - Roller support steplessly height adjustable and clampable - Safe workpiece support thanks to massive and heavy duty galvanized steel rollers

Condition: good (used), Various heavy-duty roller conveyors as casting or cooling lines, ready for immediate use Hsded Tx Ahepfx Agwofd

Condition: new, Ina 89434 axial cylindrical roller bearing, axial roller bearing New, in original packaging from stock Technical data / dimensions see PDF Hfsdpfx Agjvxt Awjwsd New price approx. €4,500 net plus VAT.

Condition: used, Roll bending machine Brand: ADFORM Hfedpjym R R Ejfx Agwod Model: HPK-60 Bending capacity: 60 mm Roller diameter: 215 mm Overall length: 1,500 mm Overall width: 900 mm Weight: 910 kg Total power: 2.3 kW

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 1,000 h, Equipment: CE marking, Weight: 7/9 tonnes - Electric motor power: 132 kW - Capacity: up to 800 MTPH - Maximum feed size: up to 600 mm - Standard product output sizes: 150/200 mm (little or no fines) (feed opening 1300 x 1500 mm) Field of application: Mineral industry and tunneling Capacity: Up to 882 [t/h] Mass: Depending on equipment, from 7.7 to 9.9 [t] Rotor center distance: 600 [mm] Feed: Depending on equipment, up to 800 [mm] Product: Reduction ratio 1:3 Hjdpfow Axb Ejx Agwefd Rotor length: From 1000 to 1500 [mm]

Condition: good (used), Year of construction: 2015, Height-adjustable powered roller conveyor, suitable for pallets and other large packages. The conveyor belt can be adjusted in height and is driven by two motors to distribute the load evenly. See the last image for all conveyor dimensions. - Complete SolidWorks and STEP files available - The powered roller conveyor is divided into two sections, and the division between these sections can be adjusted as needed. - The machine has been used in combination with a bag-in-box filler. - Maximum lifting height 800mm in 50mm increments The roller conveyor has been lightly used but is in good and fully functional condition. Hodpfx Aswf I A Rjgwsfd Please contact for more information.

Condition: used, mileage: 17,914 km, power: 184 kW (250.17 HP), first registration: 10/2023, overall weight: 16,000 kg, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 09/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Steering arrangement RIGHT, ASR, BrakeMatic, single-tone horn, ESS, EBA, MAN Tronic, MAN Media Truck Radio with 7-inch color display, LGS IV, BT hands-free system, TBM3/RIO ready, dual engine configuration, side brooms left and right. High-pressure washer 100 bar with approximately 30 l/min, hand lance, spray bars on the sweeping material pick-up unit and cylindrical brushes. Hodpfot Hcdvox Agwefd

Year of construction: 2005, condition: excellent (used), functionality: fully functional, Heavy-duty roller conveyor with individually adjustable rollers. 8 units on a steel frame. Roller length: 550 mm. 2 x 8 m, or 1 x 8 m. Roller diameter: 165 mm. Robust bearing design. Suitable as an infeed roller conveyor for planers, double edgers, resaws, etc. Hedpjyq Nndsfx Agwofd

Condition: used, Various Hutfits (platforms/carts) Load capacity from 500 kg up to 2000 kg Length from 200 - 300 cm PK1 – Length 290 cm, Width 100 cm, Load capacity 2000 kg PK2 – Length 300 cm, Width 85 cm, Load capacity 1500 kg PK3 – Length 250 cm, Width 55 cm, Load capacity 1000 kg PK4 – Length 300 cm, Width 50 cm, Load capacity 1500 kg PK5 – Length 275 cm, Width 62 cm, Load capacity 1000 kg PK6 – Length 262 cm, Width 82 cm, Load capacity 1000 kg PK7 – Length 272 cm, Width 62 cm, Load capacity 500 kg Hfodpfxjym Snlo Agwsd PK8 – Length 272 cm, Width 62 cm, Load capacity 500 kg PK9 – Length 200 cm, Width 50 cm, Load capacity 500 kg PK10 – Length 250 cm, Width 60 cm, Load capacity 1000 kg