Used Rockwell Hardness Test for sale (12,550)

Condition: excellent (used), RMS vibration exciter with power amplifier and cooling fan Here we offer you a RMS vibration exciter with power amplifier. Vibration exciter SW 1507 Max force 2158 N Cjdpegkafisfx Addshf max. speed 1,3 ms Power amplifier TGA 1500 3 x 380V/ 50Hz/ 35A / 8 kVA Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: excellent (used), RMS Vibration test system Here we offer you a RMS electrodynamic vibration test system. RMS Vibration Test System Test Manager SWR 900 Vibration exciter SW 3006 30V-50A-3434 N power amplifier TGA 3000-000.00 Condition: used / used Untested! Tests were not possible Scope of delivery: (See picture) Chedpfxogk I I Ts Addjf (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: excellent (used), Here we offer a Feutron climate test cell. Feutron climate test cell Temperature Temperature range: -40...90°C Climatic range (without heat load) 10...85°C Temperature difference,temporal during temperature operation ≤ ± 0.5 K/min. Temperature difference,temporal at climatic operation ± 1,0... ± 1.5 K/min Rate of change Heating 2.0 on average K/min Cooling 2,0 in average K/min Codpfeklv H Iex Addshf The IEC 1646 standard can be realized with testing, solar modules with max. 160kg weight and non-linear ramps. (setpoint step change) can be realized Drying Air drying Condensation drying Humidity Humidification of air Steam humidification Humidity range 10... 95 % r.h. Humidity difference,temporal ≤ ± 3,0... ±5.0 %r.H. Dew point range 8... 80,9 °C Test room Test room volume 7.0m³ Dimensions Test room dimensions width 1500 mm x height 2250 mm x depth 2000 mm Revolving door DIN right heated,i,l.. width 900 mm x height 2100 mm Viewing window, heated with darkening flap and lockable Width 500 mm x height 600 mm Feed-through opening 2x in front side right ∅ 75 mm Irradiation unit test room Cut-out 4x in side panel left for SC 2500 850 x 700 mm each Area to be irradiated when using SC 2500 1200 x 1200 mm Intensity of radiation at 1.0 m distance from wall 1000 ± 10% W/m² Lighting 1xhalogen lamp 200W Refrigeration system Bitzer compressor semi-hermetic 2-stage,air-cooled Condenser: split condenser (outdoor installation winter control) Refrigerant R507 /R23 Temperature control system Cooling brine medium Tyfocor / water Mixing ratio 50/50 Density of cooling brine 1,072 kg/dm³ Filling quantity approx. 80dm³ Pyranometer Temperature range -40... 150°C Max. Radiation absorption 4000 W/m² Spectral range (50% points) 305... 2800nm Sensitivity (norminal) 7 µV/W/m² Power supply Test cell Electrical mains connection 400V, 3/N/PE, AC, 50Hz Connection type fixed connection Max. simultaneous power requirement approx. 32.0 kW Supply line fuse 3 x 63, Char C (A) Power supply SolarConstant Electrical mains connection 400V, 3/N/PE, AC, 50Hz Connection type Max. simultaneous power requirement approx. 30.0 kW Supply line fuse 3 x 63, Char C (A) Outer dimensions of the test cell complete with: Genset room/switch cabinet and control cabinet for SolarConstant 2500 Outer dimensions of aggregate room width 3440 mm x height 2580 mm x depth 2950 mm /switch cabinet width 2200 mm x height 1830 mm x depth 1100 mm Outer dimensions of condenser, split width 900 mm x height 950 mm x depth 2000 mm Mass of test cell, total approx. 2700 kg Mass of condenser, empty 153 kg Weight : 2700 Kg Type: 3707/06 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Feutron temperature test chamber Here we offer a temperature test chamber. Feutron temperature test chamber air-cooled Nominal test chamber volume: 280 liters dimensions Test chamber outside: 1500 x 2040 x 1075 mm Fan motor and door dismantled: 1500 x 1940 x 925 mm Test chamber: 720 x 690 x 560 mm Door, clear width: 720 x 690 mm Viewing window, heated: 500 x 600 mm Temperature range -70°C to +180°C Heating: 4.0 K /min Cooling: 0.6 K /min Mains connection: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW Weight: 600 kg Type: 3416/17 Refrigerant: R507 / R23 The following information is for your safety as a buyer! Codpjk Scxmsfx Addohf The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Here we offer you a S & A test chamber for parametric testing. Temperature range -55 ° C to 200 ° C (LCO2) -65 ° C to 200 ° C (LN2) Temperature change rate 15° C / min (Standard Option) 60° C / min (Fast Option) Stability ± 0.2 ° C (including effects of mains voltage, ambient temperature between between 15° and 45° C and aging) Uniformity ± 1.0 ° C Max from -65 ° C to -55 ° C Codpfx Aocnic Dsddehf ± 0.5 ° C Max from -55 ° C to + 125 ° C ± 1,0 ° C Max from + 125 ° C to + 200 º C Coolant: LCO2 Chamber can be controlled remotely via IEEE bus or RS232C interface Weight approx. 61 kg Type: 4365A Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer gladly on the phone for you.

Condition: excellent (used), Here we offer a climatic test chamber. Air cooled Nominal test chamber volume: 280 liters Dimensions Test chamber outside: 1500 x 2040 x 1075 mm Fan motor and door disassembled: 1500 x 1940 x 925 mm test chamber: 720 x 690 x 560 mm door, clear width: 720 x 690 mm viewing window, heated: 500 x 600 mm Temperature range +5 to +100 C heating: 4,0 K /min Cooling: 0.6 K /min Climate range +10 to +95 C Humidity range: 10 to 95 % r.H. Humidity difference, temporal: ≤ ± 3.0 Water connection humidifier: city water or distilled water 20l reservoir tank. Mains connection: 400 V 3/N/PE, AC, 50 Hz Power requirement max : 6,3 kW Weight : 500 Kg Type : 3416/16 Codpfx Asiz Tqcjddshf Refrigerant : R134a For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Type: VCS 7034-5 Climatic Test Chamber, Water-cooled Vötsch VCS 7034-5 Test Volume: 335 liters Specifications for Temperature Testing: Temperature range: -70 to +180°C Time-based temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Specifications for Climate Testing: Temperature range: +10 to +95°C Time-based temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Time-based humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Chedpfx Aexmhycjddsf Heat compensation: 400 W Climate calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R452A / R-23 Important safety information for buyers: The following procedures are carried out on our offered chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. Recharging with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Subject to technical modifications and errors. All information is non-binding!) For further questions, please do not hesitate to contact us by phone.

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Chodpfoxugirjx Addjf Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Feutron Type: 3416/17 Temperature test chamber Air-cooled Test chamber nominal volume: 280 liters Dimensions: Test chamber outside: width 1540 mm x height 2090 mm x depth 1240 mm Fan motor and door dismantled: width 1540 mm x height 1940 mm x depth 925 mm Test chamber: width 720 mm x height 690 mm x depth 560 mm Door, clear width: width 720 mm x height 690 mm Viewing window, heated: width 500 mm x height 600 mm Installation dimensions of the temperature test chamber with doors open Cedpfeu E N Tiex Addjhf Width 2340 mm x height 2090 mm x depth 2165 mm Through-hole 2 pieces side wall, left ∅ 100 mm Temperature range -70°C to +180°C Heating: 3.0 K /min Cooling: 3.0 K /min Mains connection: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW  Weight: 635 kg Refrigerant: R507 / R23 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Heraeus Vötsch Type: VCS 7018-5 Climatic Test Chamber with Humidity Control, Water-Cooled Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1775 mm Characteristics for Temperature Tests: Temperature Range: -70°C to +180°C Temperature Range: ± 0.1 to ± 0.5 K Spatial Range: ± 0.5 to ± 2.0 K Temperature Gradient: 1 to 4 K Temperature Rate of Change according to IEC 60068-3-5 Heating: 7.5 K/min Cooling: 7.5 K/min Characteristic values for climatic tests: Temperature range +10 to +95°C Humidity range: 10 to 98% RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature deviation over space: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Humidity fluctuation over time: ± 1 to ± 3% RH F. Chedpfx Adov N Hc Esdof Dew point range -3 to +94 °C Electrical connection: Nominal voltage: 3/N/PE AC 400V±10% 50Hz Nominal power: 10 kW Nominal current: 21 A Fuse protection: 32 A slow-blow, provided by the customer Refrigerant: R-404A / R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg For your safety, please note the following information! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Espec Type: TPC-212D Technical Specifications Test Procedure: HAST – Highly Accelerated Stress Test Chjdpfx Adowl D Aajdef Model: Espec TPC-212D Internal Volume: 2x (approx. 22 liters) Internal Dimensions (ø x L mm): 2x 295 x 330 mm Temperature Range: +105 °C to +142.9 °C Humidity Range: 75% to 100% RH Pressure Range: 0.02 to 0.196 MPa gauge (0 to 28 psig) Power Supply: 220 V (±5%), 1-Phase, 50/60 Hz, 20 A Special Features: Two chambers in one device Notes: Two chambers: Allow for simultaneous tests with different parameters or larger test volumes. HAST test: Accelerated endurance test under high temperature and humidity with overpressure for the qualification of electronic components. Applications: Ideal for semiconductors, ICs, circuit boards, MEMS, etc. Weight: 230 kg Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions over the phone.

Condition: excellent (used), Kübrich Kübrich test systems 48V belt starter generator - component test bench Details of the test stand: (see Fig. 13) Frame with (1) Mounting device for a belt starter generator (2) Load machine (3) Belt (4) MP1: Switch cabinet (5) MP3: Control cabinet for the control system, transfer plate with main switch, I/O (6) MP2: Switch cabinet with Simotion (7) MP4: Switch cabinet with DC-DC converter (8) H3: Measurement technology box (9) H4: Transfer box Intended use: The test stand is used to carry out tests on belt starter generators during development. Technical data: Electrical connection data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Chjdpfxeumv Emj Addef Current intensity: 330 A (short term, less than 1 s) Control voltage 24 V Mechanical performance data according to the data sheet of the load machine A transmission ratio of 1:2 to the test specimen shaft must be observed. Speeds: Load machine: Set-up mode: 0 - 50 1/min Automatic mode: 0 - 10 000 1/min Test specimen motor: Set-up mode: 0 - 100 1/min Automatic mode: 0 - 20 000 1/min Dimensions and weight Width: 850 mm Height: 1386 mm Length: 1687 mm Weight: approx. 1.2 t Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch temperature test chamber water-cooled Temperature range -70°C to + 180°C Codjun Izcjpfx Addjhf Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature deviation in terms of time ± 0.5 to ± 2.0 K Temperature change rate cooling 5.0 K/min Temperature change rate heating 6.5 K/min Heat compensation +20°C 3000 W Thermal compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 765 mm Height 750 mm External dimensions: Width 870 mm Depth 1595 mm Height 1775 mm Test chamber volume 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW Rated current: 21 A Sound level at 1m distance (free-field measurement) < 69dB (A) Lateral feed-through 5.5 cm / 12.5 cm Cabinet is water-cooled Refrigerant: R- 404A and R 23 Weight approx. 570 kg The following information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Vötsch Vötsch Climate Test Chamber, Air Cooled Converted to refrigerant R-452a Specifications for Temperature Tests: Temperature range: -40°C to +180°C Temporal tolerance: ±0.1 to ±0.5 K Spatial tolerance: ±0.5 to ±1.5 K Temperature change rate according to IEC 60068-3-5: Heating: 3.2 K/min. Cooling: 3.5 K/min. Specifications for Climate Tests: Temperature range: -40°C to +180°C Temporal tolerance: ±0.1 to ±0.3 K Spatial tolerance: ±0.5 to ±1.0 K Humidity range: 10% to 98% r.h. Test chamber dimensions: Width 580 mm x Depth 765 mm x Height 750 mm Chodpfx Ajxbrkhsddsf Housing dimensions: Width 780 mm x Depth 1758 mm x Height 1800 mm Electrical connection: Rated voltage: 3/N/PE AC 400V +6/-10% 50Hz Rated power: 4.9 kW Rated current: 9 A Refrigerant: R-452a Test chamber volume: approx. 335 liters Weight: approx. 515 kg net Important information for you as a buyer! The following actions are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Specifications subject to change and errors excepted!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), Heraeus shock test chamber Here we offer a shock test chamber. Temperature shock test chamber water cooled Two-chamber design Warm chamber: The temperature range of the warm chamber is from +50°C to +220°C. Temperature deviation temporally in useful chamber center ± 1 K Temperature deviation spatially ± 2 K Temperature change rate heating 11 K/min cold chamber: the cold chamber from -65°C to +70°C Chsdpfx Adjikvlxsdef Temperature deviation temporally in useful space center ± 1 K temperature deviation spatially ± 2 K Temperature change rate heating 2 K/min cooling 3 K/min Test chamber volume 125 liters Temperature range hot chamber +50°C to +220°C Temperature range cold chamber -80°C to +70°C Test chamber dimensions width 470mm depth 650mm height 410mm Outer dimensions width 930mm depth 2115mm height 1970+mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant R404A / R23 Weight: 1000 kg For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: HT 7012 S2 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary Chsdpfxjwh Ttms Addof 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VCL 7003 Air-cooled climatic test chamber Test chamber capacity approx. 34 liters Capacity for temperature tests: Temperature range -70 to +180°C Temperature deviation over time ±0.3 to ±1.0 K Temperature homogeneity over space ±0.5 to ±2.0 K Heating rate of change 4.0 K/min Cooling rate of change 3.0 K/min Heat compensation max. 550 W Temperature calibration value +23°C and +80°C Capacity for climatic tests: Temperature range +10 to +95°C Humidity range 10 to 98% Humidity deviation over time ±1 to ±3% Temperature deviation over time ±0.3 to ±0.5 K Spatial temperature homogeneity ±0.5 to ±1.5 K Climate calibration values +23 °C / 50% RH and +95 °C / 50% RH Test room dimensions: Width 350 mm, Depth 300 mm, Height 310 mm External dimensions: Width 640 mm, Depth 750 mm, Height 1730 mm Electrical connection: 1/N/PE AC 230 V ±10%, 50 Hz Rated current 11.0 A Rated power, max. 2.5 kW Sound pressure level 59 dB(A) Refrigerant: R-404 A / R23 Weight approx. 130 kg For your safety, please note the following information as a buyer! The following steps are performed on our chambers in advance: Chjdpfx Asv Tnd Sjddof 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Heraeus Vötsch temperature test chamber Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch temperature test chamber VTS 7033 water cooled Temperature range: -70°C to +180°C Temperature deviation temporal ± 0,5 K Temperature deviation temporal ± 1,5 K Heating speed: 7,5 K/min Cooling rate: 6.5 K/min Test chamber dimensions: Width 825 mm x depth 800 mm x height 870 mm housing dimensions: 1080 mm x 1710 mm x 1950 mm lateral passage 12cm and 13cm voltage: 400V+6/-10%,3/N, 50Hz Chedpfelt U Avjx Addef nominal power 9,5 kW nominal current 22 A refrigerant R404A / R23 approx. 570 liters weight: 580 kg For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored by calibrated equipment. Type: VTS 7033 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a Vötsch climatic test chamber. Designation VC³ 4100 Air-cooled With temperature change rate of 3 K/min Test chamber dimensions: Height 950 mm x width 1100 mm x depth 950 mm Unit dimensions: Height 2000 mm x width 1300 mm x depth 1916 mm Volume: 990 liters Feed-through: Ø 125 mm Ø 50 mm Data for temperature tests: Temperature range -42°C to +180°C Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.5 K Temperature change rate: Heating 4.0 K/min Cooling 3.0 K/min Max. heat compensation at +20°C 4500 watts Data for climate tests Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% r. h. Temperature deviation temporal ± 0.1 to ± 0.3 K Chjdeqwim Espfx Addof Temperature homogeneity in space ± 0.5 to ± 1.0 K Humidity deviation temporal ± 1 to ± 3% r. h. Heat compensation max. 500 W Voltage: 3/N/PE AC 400V ± 10% 50Hz Rated power: 11.5 kW Nominal current: 22.0 A Refrigerant: R-404 A Weight approx. 840 kg Type: VC³ 4100 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), EDAG EDAG Huf endurance test bench Purpose: This test bench is intended exclusively for testing parts that are capable of rotational and/or translational movement as part of an endurance test and within the limits of the following technical data. Technical data: Dimensions: width 1565 mm x depth 615 mm x height 1655 mm Weight approx. 450 kg Operating voltage 400V /50Hz Control voltage 5, 24 Provisional fuse 16 A Test device: Maximum stroke 194 mm Maximum axial force 500 N Maximum moment 5 Nm Break-out force (manually operated slide) 15 N Displacement force (manually operated slide) 10 N Other equipment Ρ4, 24" TFT monitor (1900 X 1080) Operating system Windows XP Measurement and control software LabVIEW 2011 PC plug-in cards 1 card, NI PCI-6251,1 card, N1 PCI-7044 Drawer 500 mm (fully extended with automatic closing) Additional load 500 N Chsdpfx Ajvx S Apoddof Drawer cabinet, lockable 3 drawers The teach-in endurance test bench is a device for carrying out endurance tests On test objects that can rotate and/or move translationally, e.g. cylinders Locks, door handles, key functions. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Cjdpomfny Iefx Addjhf Here we offer a Weiss emission test chamber. Mini - SHED for Diurnal Loss Measurements Test chamber dimensions: Width 1600 mm x Depth 2140 mm x Height 2150 (Usable 1600) mm. Housing dimensions: Width 1760 mm x depth 3100 mm x heights 2790 mm Max. floor load 250 kg Operating range +18 °C ...+45 °C, (at higher temperatures SHED operation is only possible without Tedlar bag) Temperature range +18 °C ...+45 °C Temperature constancy ≤ ±1 K (temporal) Temperature change rate, (heating and cooling) approx. 0.5 K/min., without test material Duct connection (air inlet and outlet) ∅ 80 mm, in chamber rear wall Shut-off valve, gas-tight (air inlet and outlet) ∅ 80 mm, gas-tight, pneumatic operation Delivery limit: connection flange of shut-off valve Cooling water consumption approx. 0.8 m3/h Voltage: 230/400 V; 3 PH + N + PE; 50 Hz Rated power: 4,1 kW Rated current: 14,0A Weight: approx. 2500 kg type: WT 5,1'/ + 18-45 Condition: used / used Sale ex location Scope of supply: (Only the Weiss emission test chamber WT 5,1'/ + 18-45 Mini-SHED) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Vötsch Type: VTS³ 7018-5 Water-cooled Test chamber dimensions: Width 580 mm x depth 450 mm x height 750 mm Cedpon E Sk Esfx Addehf Housing dimensions: Width 900 mm x depth 1550 mm x height 1850 mm Temperature test: Temperature range: -70°C to +180°C Temperature change rate: Heating 7.5 K/min Temperature change rate: cooling 7.5 K/min Test chamber volume: 190 liters Nominal voltage: 400V Rated current: 20 A Rated power: 9 kW Weight: approx. 540 kg Refrigerant: R404A and R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Heraeus Vötsch Type: VTS 7027-15 Vötsch Temperature Test Chamber, Water-Cooled Temperature Range: -70°C to +180°C Temperature Rate of Change: Temperature Deviation Temporarily ± 0.3 to ± 0.8 K Temperature Deviation Spatially ± 0.5 to ± 2.0 K Cooling Rate of Change: 18.0 °C Heating Rate of Change: 17.0 °C Test Chamber Dimensions: Width 580 x Depth 620 x Height 950 mm External Dimensions: Width 870 x Depth 1895 x Height 1775 mm Side Ports: 1 x 60 mm Ø and 2 x 120 mm Ø Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 16 kW Rated current 31 A Refrigerant R452A / R23 Approx. 270 liters Weight: 835 kg For your safety, the following information is provided as a buyer! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant Codpewl Argsfx Addshf 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Siga Type: GS-517-400 External dimensions LxDxH 4960 x 2500 x 2400 mm. Complete system is calibrated according to DAKKS and and therefore approved for approval-relevant tests Butane loading speed - infinitely variable from 5 g/h to 77 g/h Loading speed fuel - infinitely variable from 5 g/h to 100 g/h Fuel temperature control - infinitely variable from 20°C to 50°C Fuel quantity selectable - from 0 l to 8 l Selectable breakthrough criterion - from 1g to 10g Purge air flow temperature - Infinitely variable from 25°C to 30°C Precision scales for test piece and reference AKF - Measuring range up to 6 kg, 0.1 8 resolution Purging vacuum - Infinitely variable from 0 hPa to 30 hPa Rinsing air flow - infinitely variable from 1 l /min to 60 l/min Humidity purge air flow - infinitely variable from 10% rH to 85% rH Number of cycles from 1 to 999 (load/purge) Condition: gebraucht / used Sale ex location! Csdpfou Aa A Aox Addohf Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch temperature test chamber water-cooled Chedpfxjun Rule Addef Temperature range -70°C to + 180°C Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature deviation in terms of time ± 0.5 to ± 2.0 K Temperature change rate cooling 5.0 K/min Temperature change rate heating 6.5 K/min Heat compensation +20°C 3000 W Thermal compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 765 mm Height 750 mm External dimensions: Width 870 mm Depth 1595 mm Height 1775 mm Test chamber volume 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW Rated current: 21 A Sound level at 1m distance (free-field measurement) < 69dB (A) Lateral feed-through 5.5 cm / 12.5 cm Cabinet is water-cooled Refrigerant: R- 404A and R 23 Weight approx. 570 kg The following information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.