Used Roller Conveyor Shot Blasting Machine for sale (70,699)

Condition: new, Year of construction: 2026, functionality: fully functional, operating pressure: 6 bar, inner dimension width: 600 mm, inner dimension height: 400 mm, volume flow: 10,500 m³/h, Equipment: documentation/manual, New Wire Mesh Belt Shot Blasting Machine RB-600 AH 4 Description: The RB-600 AH 4 wire mesh belt shot blasting machine from ABRAZIV Kft. is designed for the economical and continuous surface treatment of small to medium-sized workpieces. The machine is suitable for descaling, derusting, cleaning, and surface preparation of aluminum and steel castings, forgings, and workpieces that cannot be shot blasted in bulk. The machine is manufactured to order and can be configured individually according to customer requirements. The RB-600 AH 4 is equipped with four ABR-380 shot blasting turbines. Two turbines are located above and two below the wire mesh conveyor belt. This arrangement ensures optimal coverage of the cross-section and a uniform blasting result. The turbines operate at an angle of approximately 70° to the direction of travel and have eight blasting blades and a pre-accelerator. The active blasting area is lined with highly wear-resistant manganese steel. Other internal areas are protected by wear-resistant, noise-reducing rubber. The wire mesh belt is made of highly wear-resistant spring steel. A closed blasting media circuit with a screw conveyor, bucket elevator, blasting media cleaning system, and dosing system ensures reliable operation. Three-layer rubber curtains reduce blasting media leakage. An adjustable high-pressure blow-off system cleans the workpieces after the blasting process. The extraction and filter system with cartridge filters achieves a dust emission of max. 3 mg/m³. Technical Data Passage Passage width: 600 mm Max. workpiece height: 400 mm Min. workpiece length: approx. 1,000 mm Shot Blasting Turbines Number: 4 Type: ABR-380 Turbine diameter: 380 mm Speed: 2,800 1/min Blasting media output per turbine: 120 kg/min Wire Mesh Conveyor Belt Load capacity: 500 kg/m Speed: 0–4 m/min Power Consumption Base machine: 45.5 kW Cartridge filter: 7.5 kW Compressed air: min. 6 bar Compressed air consumption filter: 12.5 m³/h Other Data Blasting media capacity: approx. 1,000 kg Blasting media grain size: 0.4–1.2 mm Extraction capacity: 10,500 m³/h Filter area: 252 m² Dust emission: max. 3 mg/m³ Electrical Data Mains voltage: 3 × 400 V Control voltage: 220 V Frequency: 50 Hz Optional accessories available Ibedpfxjzkivts Agyjc Magnetic drum separator Frequency converter Automatic blasting media dosing Special paint finish Transport Assembly Commissioning Operator training Spare parts supply Maintenance and service Applications Aluminum and steel castings Forgings Small steel components Single and series components Descaling Derusting Cleaning Surface preparation Location / Production Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we produce shot blasting machines individually according to customer requirements. Other sizes and special designs are available. We will be happy to provide you with a non-binding offer. Price on request

Condition: refurbished (used), functionality: fully functional, air demand: 6 m³/h, compressed air connection: 6 bar, warranty duration: 6 months, workpiece weight (max.): 800 kg, Fully Overhauled Rubber Belt Blasting Machine GH-4 For sale is a fully overhauled rubber belt blasting machine GH-4, professionally refurbished by the manufacturer ABRAZIV. This machine is ideally suited for deburring, descaling, cleaning, and surface roughening of castings, forgings, press parts, and other bulk goods. Its robust design and reliable blasting technology make it versatile for use in foundries, forging shops, and the metalworking industry. The machine has been professionally overhauled (refurbished) and is in perfect technical condition, like new. It is immediately available and can be inspected by appointment. Technical Data Blasting Chamber Rubber belt width: 1,300 mm Belt drum diameter: 1,150 mm Maximum batch weight: 800 kg Blasting media capacity: 800 kg Blasting Turbines Number of turbines: 2 Power per turbine: 11 kW Connection Values Electrical connection power: 27.5 kW Compressed air connection: 6 bar Compressed air consumption: 6 m³/h Extraction capacity: 5,500 m³/h Condition Fully overhauled (refurbished) Technically inspected Immediately available As the manufacturer, we can also offer you the following services, if desired: Transport Installation Commissioning Operator training Ibodpfjzicuasx Agyjc Spare parts supply Maintenance and service Location: Kecskemét, Hungary Inspection is possible at any time by prior appointment. Price on request.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: 18M0227, Shot blasting / sandblasting machine. Used for a short period, custom-made by NORDBLAST. The machine’s original purpose was to compact the aluminum from which bicycle rims are made and to create a rough surface texture, resulting in a homogeneous rim surface. Thanks to its nozzle-based application system, the machine is versatile and suitable for various applications. SIEMENS control system, filtration unit, etc. Iedpfx Agjzu Slreyjbc

Condition: new, Product description: Casting, forging, pressing, heat treatment, finished product, semi-finished product, steel fabrication etc. It is preferred for surface cleaning, pre-coating preparation or revision works. Its distinct advantages are that it enables versatile sandblasting, and that large and small parts with irregular geometry can be sandblasted. With the help of the digital clock we use in our machines, the sandblasting time can be adjusted according to the part type and desired sandblasting surface. Casting sandblasting, forging sandblasting, press - heat treatment workpieces sandblasting, finished product sandblasting, semi-finished sandblasting, steel fabrication sandblasting, etc. used in transactions. The machine is designed and manufactured according to the size, weight and daily number of the parts to be sandblasted. It can be designed as a continuous system upon request and can be included in the paint line. Ijdogha A Sspfx Agysbc

Condition: used, Year of construction: 2007, functionality: fully functional, space requirement width: 2,300 mm, space requirement length: 3,500 mm, space requirement height: 4,200 mm, conveyor belt width: 850 mm, -WAG 916- Here, a compact shot blasting machine from the manufacturer Wheelabrator is offered for sale. The compact shot blasting machine, type MB-100, is fully functional. Operating hours: 6493.23 h Turbine power: 7.5 kW, 14.6 Amps Next inspection: 01/27 Machine control: Manual or automatic operation Iodpszkub Ujfx Agyobc Feeder control: Manual or automatic operation Blast time setting: Fine adjustment between seconds, minutes, and hours Space requirement length: approx. 3500 mm Space requirement width: approx. 2300 mm Space requirement height: approx. 4200 mm Conveyor belt width: 850 mm The compact shot blasting machine has been completely disassembled and cannot be tested while powered on.

Year of construction: 2025, condition: new, ASK - 0 Hanger Type Shot Blasting Machine; It is used for polishing sheet and metal parts which have come out of press and heat treatment, cleaning and roughening of castings, preparation before paint and rubber coating, taking forging parts to canvases and revision of old parts. (Quantity x Diameter): Ø: 800 H: 700 has 2 turbine x Ø 325mm with 6 blades Iedovkf Agopfx Agyebc The cabin is made of ST-37 sheet metal and the hot pot area is supported by Brinell or Manganese wear plate. The interior of the cabinet is covered with a rubber sheet to prevent it from being exposed to abrasion due to the sandblasting process. Rubber sheets are fixed to the cabinet with moldings. (Coating with a complete manganese armor is optionally offered to our customers.) The wear plate cladding is screw-in design for future wear-based replacements. It can be easily changed by authorized personnel in your company. Although the cabin door can be pneumatic or manual, it is designed as a winged system and 2 pieces. The cabinet door has a lock system to prevent it from being opened during the blasting process. In addition, there is a sensor or switch on the cabinet that stops sandblasting when the door is open. The system consisting of rail line, suspension gear system and crane (optional) is designed to allow the material to be sanded to move easily inside the machine. Full automation panel is available. Panel materials are Siemens / Schineider brand. Machine control is provided with a 10” PLC screen.

Year of construction: 1995, condition: excellent (used), MONORAIL HANGER SHOT BLASTING MACHINE WITH WETFILTER Designation: Monorail Hanger Shot Blaster Brand : Schlick Type: DHB 12/14 Workpieces ø: 1.200mm Workpieces High max.: 1.400mm Charge max. kg: 500kg Shot Wheel: 3 Pieces with 7,5kw with Drivers Consisting of: - Monorail Hanger Shot Blaster Typ: DHB 12/14 - O-Hanger System with Workpieceshangers - Main Panel - Wet Filter Wir bieten auch Ersatzteile für Rösler, Schlick, Wheelabrator, Gietart usw. Strahlanlagen an! Ijdpfx Asd Hp Sqegyebc We can offert for spare Parts for Rösler, Shot Blasting Machines!

Condition: used, Year of construction: 2009, Roller conveyor - length: 3 m Ibedpfstrwc Sox Agyec - roller width: 160 mm - electric motor: 0,55 kW

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Ibjdpfx Aozrg T Eogyoc Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Year of construction: 2000, condition: used, Year of manufacture: 2000 Iedet Ag Udspfx Agyjbc ROTOFLOW 170-N rotary blasting machine from OMSG, featuring an automatic feed tower, manufactured in 2000. Used rotary blasting machine. Continuous belt blasting machine for shot blasting/sandblasting of aluminum die castings, brass or steel forgings, screws, and bolts. Automatic feed tower. Turbine inverter. Special two-position valves. Filter.

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, New Single-head cutting machine OMC GIOBI 600 (year 2021) with measuring roller conveyor FOM INDUSTRIE ASSOMAK VS 6m (year 2025) and inlet conveyor PORTER 4,2m (year 2025) Condition: new, demo machines Iedpfsy Erwfex Agyjbc - Saw blade D 600 mm - Hdro-pneumatic feed - Inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - Spray mist blade lubrication system - Integral pneumatic protection - ASSOMAK VS 6m: measuring roller conveyor with digital display and manual length stop positioning - Minimum cut 0 mm - Maximum cut 6000 mm - Measurement reading by encoder - Positioning precision ± 0,5 mm - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm - PORTER 4,2m: inlet roller conveyor - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm

Condition: excellent (used), Year of construction: 1990, the machine in perfect condition very good machine Ijdehmi Ucspfx Agysbc This is a combo machine pelletizer and sandblasting machine (two in one) very low operation hours

Year of construction: 2001, condition: used, Technical details: Isdju Nu Nkepfx Agyebc Numbers of turbines: 1 Stck. drum length: 580 mm operating hours: 30.810 h compressed air: 5 - 7 bar filling volume: 100 dm³ total power requirement: 24,2 kW total wight: ca. 5,8 t DRUM - Shotblasting Plant in a closed drum Manual and automatic operation technical specifications: -spinning wheel Ø = 380mm -drum Ø = 1150 mm x length 580 mm -max. filling weight = 220 kg, filling volume 100dm³ -piece size (max. edge length) = 100mm -Turbines 380mm; 15.0 kW -blast media discharge speed approx. 80.0 m/s -Ablast media throughput/turbine approx. 240.0 kg/min. -Steel abrasive grade, nothing else possible! (recommended is: StD-Z 0,6 DIN 8201 HV 700) -Compressed air with cartridge filter system approx. 12 m³/h The plant is not electrically connected. Sale as currently is at the warehouse Leipzig (see last photos). Machine has been functional before dismantling. *

Condition: new, Year of construction: 2025, Trough belt, impeller wheel, shot blasting system, 11 kW, directly driven impeller turbine with 8 throwing blades. Belt width 1000 mm and diameter 900 mm. Ijdpfx Ashvikujgyebc

Condition: good (used), Gravity Flexi Roller Conveyors in Stock 3 Conveyors available Dimensions Conveyor 1, 3240mm closed x 560mm wide double plastic rollers, height 680mm fully adjustable Conveyor 2, 750mm closed - 2160mm fully open x 500mm wide steel rollers, height 8000mm fully adjustable Ijdpfx Agjyr Nuajyjbc Conveyor 3, 1350mm closed - 4500mm fully open x 500mm wide plastic rollers, height 770mm fully adjustable

Condition: used, Checkweigher for boxes and crates This checkweigher weighs boxes, crates or larger packs on a weigh platform with rollers. The product rolls across the scale, the weight shows straight away on the touchscreen and you can see per product whether it is within limits. The machine is compact, made of stainless steel and stands on adjustable feet. The screen holds product data and statistics per item. There is no legible rating plate, so the make and year of manufacture are unknown. Ijdpfxsz Nc Spe Agyjbc Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Checkweigher with roller conveyor Weigh platform: Roller conveyor Controls: Touchscreen with product data and statistics Construction: Stainless steel, on adjustable feet

Condition: good (used), Year of construction: 2015, Inclined roller conveyor, Mosca, SRF – used: Price ex works: only €2,950 (net) ex works! Manufacturer: Mosca Type: SRF Year of manufacture: 2015 Machine number: 109867 1L+N+PE, 50-60Hz, 100-240V, 2.5A, max. 16 A Condition: good, Available: from approximately the end of October 2026 Location: Erfurt area Ibjdozpf Hxjpfx Agysc

Condition: good (used), Features: * Used roller conveyor * Condition: good (used) * Feet must be ordered separately * Condition: fully functional with signs of use * Ideal for rapid material transport * Professionally disassembled and packaged * 24V technology * Incl. sensors and light barriers (pre-assembled) Technical data: Ijdpsff Hguefx Agysbc Dimensions of the roller conveyor Manufacturer: Interroll Type: Non-accumulation Drive: 24V technology Overall width approx.: 540mm Conveyor width: 455 mm Roller spacing: 75mm The system consists of 7 segments: 7 x 1,650 with 2 drive rollers each Frame specifications: Height: 150mm Width: 40mm Max. weight of the conveyed goods: 50 kg Roller conveyor: The roller conveyor is ideal for integrating machines or workstations in the picking area and optimizing internal processes. During transport, the roller conveyor can transport delicate and variously sized containers, boxes, or other packaging and article units to the delivery or collection point and can also be used as a connecting section before or between production and processing machines. Furthermore, it enables efficient parts transport within the company and warehouse and is used to convey significant quantities and distances. Tailor-made solutions for your intralogistics: For roller conveyors, belt conveyors, inclined conveyors, or telescopes for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, pharmaceuticals, trade, or the electronics industry. Together, we will develop solutions to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or complementary components such as picking shelves or containers.

Condition: good (used), Features: * Used roller conveyor from the manufacturer Mannesmann / Dematic * Condition: fully functional with signs of use * Ideal for fast material transport * Professionally disassembled and packaged * Drive: Round belt * Includes SEW motor 0.55 kW * Quantity: 2 units Technical data: Dimensions of the roller conveyor Overall length: 600 mm Overall width: 700 mm Roller width: 610 mm Roller diameter: 50 mm Conveyor consists of 10 rollers Frame specifications: Height: 165 mm Width: 35 mm Roller conveyor The roller conveyor is ideal for use in the picking zone to link machines or workstations and optimize internal processes. During transport, the roller conveyor can transport delicate and differently sized containers, boxes, or other packaging and article units to the delivery or collection point and also serves as a connecting section before or between production and processing machines. It also enables efficient parts transport within the company and warehouse and is used to transport significant quantities of goods over long distances. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods! We will gladly prepare an individual offer for you or advise you on design or assembly issues. Simply let us know your requirements and the local conditions. Ibodpfxjfivyxs Agysc Take advantage of our many years of experience and our excellent network of experts. We have already successfully completed projects for companies in a wide range of industries, such as logistics, pharmaceuticals, the trades, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or supplementary components such as picking shelves or containers.

Condition: like new (used), Year of construction: 2022, operating hours: 10 h, functionality: fully functional, compressed air connection: 16 bar, total width: 387 mm, total length: 565 mm, total height: 1,007 mm, overall weight: 75 kg, type of input current: AC, pressure: 16 bar, input voltage: 230 V, operating pressure: 8 bar, noise level: 120 dB, empty load weight: 75 kg, hose package length: 7,000 mm, High-performance dry ice blasting system IC-310-S with integrated dry ice mill IS 10 (built-in, fully automatic crushing unit) for fine cleaning using micro-particles and for aggressive blasting on demanding surfaces. The patented dry ice mill IS 10 allows you to crush the 3 mm dry ice pellets into 1.5 mm micro-pellets as needed, thus enabling the cleaning of sensitive surfaces such as polished surfaces, pneumatic and electrical lines, machine panels, or vehicle interiors. The patented, continuously adjustable dosing system operates reliably without any loss of compressed air. The operating pressure is in the range of 1-16 bar. The length of the compressed air supply hose is 10 m. The integrated flow system prevents freezing and, consequently, blockages at the outlet of the hopper. The design of the pipe and hose system prevents the breaking of pellets. The blasting gun is ergonomically shaped, robust, safe, and easy to use. The stainless steel frame and the machine housing guarantee a long service life. The machine requires only minimal maintenance, even under the most difficult operating conditions. The stainless steel filling hopper has a capacity of 13 kg. The dry ice consumption is 10-100 kg/h. Included in the standard scope of delivery: - Dry ice blaster IC-310-S with round blasting nozzle RN-10-08 and ice shovel (new price: €14,999) - Nozzle case Flex Case II Plus with a 14-piece nozzle set (new price: €1,399) - External module PAM-01 with 7 m hose extension (new price: €899) Additional equipment procured separately: Iodpfx Agowum Svjyobc - Safety helmet M306 with comfort face shield and capsule ear protection incl. helmet adapter (new price: €412) - Length-adjustable air hose (new price: €66) - Breathing air supply hose 10 m (new price: €121) - Breathing air purification unit with coupling set (new price: €930) - Air pressure regulator with belt (new price: €390) - Risk assessment (price: €125) Upon request, the dry ice blaster can be delivered within a radius of 200 km from our company headquarters. Delivery costs upon agreement.

Condition: used, Roller conveyor from Behringer sawing machine Heavy-duty design with geared motor; control system not included as it is installed in the control cabinet of the saw. Needs to be adapted by the customer. Length: 8750 mm Roller width: 800 mm Height: approx. 850 mm Isdpfx Ajz At I Dogyobc Needs to be adapted. Other lengths available upon request. This offer is exclusively for commercial enterprises as defined in §14 of the German Civil Code (BGB).

Condition: used, Year of construction: 2014, - Manufacturer: Cefa/Sorbini - Model: SMARTCOATER MF-EVO - Year of manufacture: 2014 - Working width: 1,300 mm - Working height: 880 mm - 940 mm - Workpiece height: 3 - 80 mm - Operating side: right - Coating roller: rubber hardness ~ 50 - 60 Shore - Coating quantity: ~ 4-50g/m2 - Coating roller diameter: 250 mm - Metering roller diameter: 173 mm - Metering roller with switchable reverse operation - Double diaphragm pump: 1 piece - Transport system with conveyor belt - Compressed air connection: 6 bar - Machine is mobile on flanged rollers - Feed speed: ~ 4 - 20 m/min - Control cabinet is mounted on the rear of the machine - Voltage, frequency: 400 / 50 Ibedpfxez Ehq No Agyjc - Voltage fluctuations max. +/- 5 %

Condition: good (used), Year of construction: 2013, functionality: fully functional, power: 3 kW (4.08 HP), empty load weight: 1,200 kg, Heavy-duty pallet transport roller conveyor, pallet tipping roller conveyor. Pneumatic lifting feet are mounted under the chain conveyor section. Its maximum height is 55 mm. The raised roller row conveys the pallets at a 90° angle. Track dimensions: Width: 3500 mm Length: 1900 mm Roller width: 920 mm Roller diameter: 90 mm Wheelbase: 200 mm Roller drive (3 motors): SEW-Eurodrive R40 DT71048MG Power: 0.37 kW Motor speed: 1380 rpm Output speed: 64 rpm Chain drive (1 motor): SEW-Eurodrive SA47T DT80N4MM11 Power: 1.1 kW Motor speed: 2900 rpm Output speed: 61 rpm Isdpfevxtg Nex Agyjbc

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 00073068, roll pitch: 62 mm, total width: 692 mm, total height: 800 mm, total length: 25,000 mm, conveying length: 25,000 mm, working width: 600 mm, frame height: 800 mm, track width: 600 mm, For sale is a professional, motor-driven roller conveyor manufactured by AMI Förder- und Lagertechnik, built in 2021. Technical specifications: • Overall length: 25,000 mm • Conveyor height: 800 mm • Conveyor width: 600 mm • Color: RAL 5010 Blue • Without side guides • Includes discharge section of 3,000 mm Ijdpfx Aez Rv S Hegyebc • With roller stop • Two-sided emergency stop pull cords Photoelectric sensor control: • 1 photoelectric sensor at the end of the powered section (after 22,000 mm / beginning of discharge section) → stops the conveyor system when occupied • 1 photoelectric sensor at the end of the discharge section (mounted under the discharge section, facing upwards, fan-shaped beam) → starts the conveyor system when released (adjustable response time) Process: Boxes are placed along the entire powered section and transported to the pick-up position. The control system prevents the discharge section from becoming overcrowded and automatically restarts when a box is removed. Electrical equipment (complete scope of supply): • 1 motor drive controller • 1 control cabinet with main operating elements on the door • 1 Siemens PLC controller • 2 photoelectric sensors • 2 emergency stop pull cords Sales information: • Delivery and collection possible by arrangement The system was built in 2021 and features a complete, professional control system (Siemens PLC + photoelectric sensor control). Ideal for the transport of boxes/containers in logistics, production, or shipping.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: TR-A-16/2024, working height: 900 mm, workpiece weight (max.): 120 kg, total width: 1,400 mm, total length: 4,670 mm, total height: 3,550 mm, empty load weight: 550 kg, height adjustment type: mechanical, load capacity: 120 kg, table width: 3,500 mm, table length: 3,000 mm, We offer this ROL-PAS TR-A BOX machine for the assembly and testing of roller blinds, in like-new condition, manufactured in 2024. Manufacturer: ROL-PAS Model type: TR-A BOX Serial number: TR-A-16/2024 Date of manufacture: 12/2024 Ibsdpfx Agez Hmbioyjc If you have any further questions or require more information, please do not hesitate to send us a message or call us.