Used Roller Crusher for sale (9,436)

Condition: used, Moehringer / Braun Canali roller conveyor Roller cover length 1400 mm Roller spacing 700 mm Dksdpfx Aedffnhsptot Length approx. 11000 mm

Condition: used, color: orange, Year of construction: 2020, operating hours: 3,460 h, Empty weight: 16.000 kg Dimensions (LxBxH): 595 x 231 x 296 cm Roller width: 2140 mm Dkjdjy Egcvjpfx Aptjt

Condition: used, color: yellow, Year of construction: 2021, operating hours: 3,830 h, Year of manufacture: 2021 Dsdpfx Asx Sqhieptjkt Empty weight: 16.000 kg Dimensions (LxBxH): 622 x 230 x 299 cm Engine type: Deutz DEUTZ TCD4.1 L-4

Condition: used, functionality: fully functional, power: 24 kW (32.63 HP), color: orange, operation weight: 2,400 kg, Year of construction: 2020, operating hours: 2,400 h, Hamm HD12 i VT combination roller, new model Dsdpfx Apjzzpibotskt Year of manufacture: 2020 24 kW Kubota engine, type D1803-CR 2,400 - 3,320 kg Edge cutting wheel 120 cm working width

Condition: good (used), Year of construction: 1994, Roller conveyor, roller track, powered roller conveyor, roller track Dodpjzn Iw Dofx Aptokt -Manufacturer: Gubisch, driven roller conveyor type RF 3.0 -Drive motor: Lenze 0.37 kW with variable gearbox -Speed: 10 to 46 m/min -Roller width: 250 mm -Roller diameter: 83 mm -Axle spacing: 130 mm -Conveyor length: approx. 2900 mm -Base: height adjustable -Pneumatic equipment: not functioning -Dimensions: 3000/470/H1120 mm -Weight: 281 kg

Condition: used, functionality: fully functional, power: 24 kW (32.63 HP), color: orange, operation weight: 2,570 kg, Year of construction: 2019, operating hours: 1,990 h, HAMM HD12i VO VIO tandem roller with oscillation Dksdozzpagepfx Aptst Year of manufacture 2019 1,990 operating hours 2,570 - 3,470 kg 24 kW Kubota engine Edge cutter wheel New model

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,050 mm, sheet thickness (max.): 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulically adjustable rear and lower rolls Precision bending with braked main motor Conical bending and pre-bending system Lower and upper roll drive by planetary gearbox Rear roll ball support system to facilitate sheet movement Compliance with EU safety directives High-strength forged steel rolls made of SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operation manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for assistance in large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending Capacity: 10/12 mm Upper & Lower Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Dkjdpfx Asw Slctsptst Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Condition: used, Manufacturer: Jászberényi Aprítógépgyár Type: PE VI Orifice: 600x350 mm Max size of the delivering size: 550x300 mm Dsdpoy Ayb Hofx Aptskt Outlet size: 30-80 Power of motor: 22 kW Weight with motor: 6,6 tons Overall size: L=2338 mm x W= 1655 mm x H= 1820 mm Detailed technical specifications are shown in the attached photos. The equipment is currently in disassembled condition. It is offered exactly as shown in the pictures. All components are available and the machine can be fully reassembled.

Condition: new, neu ca. 8 Wochen ab Auftragse Deutschland 2004 € 3000 mm 820 - 940 mm 300 kg/m 350 mm 63 x 3 mm 15 mm 250 mm supply- and removal roller table with lateral guidance FURTHER LENGTHS: 1meter € 1.149,- 2 meter € 1.418,- 4 meter € 2.405,- 5meter € 3.001,- Djdpfx Apewiq Spjtskt 6 meter € 3.668,- FURTHER LENGTHS AND ROLL WIDTHS ON REQUES. (sample photo)

Condition: used, Year of construction: 1980, Used vehicle Vehicle No. 3401, Fiat-Allis FL10B tracked bulldozer, year of manufacture approx. 1980, 2.100 shovel with teeth, 400mm steel tracks, cabin, protective grille. Please inquire for further details. Errors and prior sale excepted. Dkodpfozzhglox Aptet

Condition: good (used), Year of construction: 1996, Single-shaft shredder with push floor Rotor width: 820 mm Dedjzrlu Ujpfx Aptekt Rotor diameter: 368 mm, with 40 blades 18.5 kW motor Screen size: 20 mm In fully functional condition, ready for immediate use.

Condition: new, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, Small wood chipper, manufactured in Denmark, is new. Dodeza U Emepfx Aptekt

Condition: good (used), 19 heavy-duty conveyor rollers 238 mm Ø x 600 mm roller shell length with 40 mm Ø shaft and 2 pedestal bearings, with chain wheel 16 B1/Z= 17, 1 geared motor drive with fluid coupling, if required also 6 spiral rollers for right-hand discharge 238/266 mm Ø x 900 mm Dedpfx Aowb A Hvjptjkt

Condition: like new (used), functionality: fully functional, number of rollers: 4, roller (bottom) diameter: 660 mm, roller (top) diameter: 660 mm, side roll diameter: 525 mm, working width: 3,050 mm, sheet thickness (max.): 60 mm, overall weight: 1,13,000 kg, total length: 6,500 mm, total width: 5,200 mm, total height: 4,250 mm, Equipment: documentation/manual, HYDRAULICS Useful length mm 3050 Thickness mm 60 Upper roller diameter mm 660 Lower roller diameter mm 660 Dedpfx Aewrnkhsptekt Side roller diameter mm 525 Lower roller movement mm 110 Bending roller movement mm 465 Approx. weight kg 113,000 USED MACHINE OVERHAULED

Year of construction: 2001, condition: used, - Manufacturer: Venjakob - With dust cover including folding doors - Connections for ventilation and air release - Fully covered under the rollers - Year of manufacture 2001 - Working width 1,300mm - Working height: 900 +- 20mm - Roller diameter: 80mm - Roller pitch: 140mm Dksdpfezf N Rmsx Aptjt - Feed speed: ~ 2-8m/min. - Location: in the warehouse - without control cabinet

Condition: used, Year of construction: 1997, - Manufacturer Cefla / Sorbini - Type T / 20-SP-1 - year of construction 1997 - Working width 1300 mm - working height 880 - 940 mm - Part height ~ 3 - 80 mm - Operating side right - Filler application cylinder ~250 mm - Hard chrome-plated metering roller 174 mm - Hard chrome-plated smoothing roller 245 mm - Reverse drive - Belt transport - Belt control - Length ~ 1640 mm - width 2590 mm - height ~ 1700 mm Dkjdpfx Apjzf N E Rjtjt - Feed rate 6 - 24 m/min - Total connection 4.5 kW - Weight 2,000 kg - With switch cabinet - Volt, Hz 400 / 50 - Location, not in stock

Condition: used, Year of construction: 2001, - Manufacturer: Bürkle - Type: SLC - Year of manufacture: 2001 Djdjykuzvspfx Aptekt - Operating side: left - For single-sided application of lacquer - Oscillating application roller squeegee Technical data: - Maximum working width: 1.300 mm - Minimum workpiece length: 350 mm - Maximum workpiece weight: 250 kg - Conveyor belt width 1.270 mm - Workpiece thickness 3 - 100 mm - Machine length: 800 mm - Machine width: 3.200 mm - Application roller, rubberized, EPDM approx. D: 238 mm - Application roller Shore hardness: 45 (can be changed) - Metering roller, chrome-plated, D: 174 mm - Counterpressure roller, rubberized, D: 186 mm - Conveyor speed, adjustable from approx. 8-25 m/min. - Working height ~ 900 mm + - 30 mm - Clearance height approx. 3 - 80 mm - Compressed air 6 bar, G1/4 inch, approx. 50 NL/min. - Operating voltage 400 V, 50 Hz, 3 phases - Total connected load approx. 5.5 kW - With control cabinet - Weight approx. 1.450 kg - Location: in stock 32825 Blomberg

Year of construction: 2014, condition: used, Technical data: - Manufacturer: Cefla - Type: TR 3000 Djdeyatdzopfx Aptjkt - With own control cabinet - Feed speed adjustment ~ 2,2 - 20m/min. - Emergency Stop - Display converter - Year of manufacture: 2014 - Transport length: 3,000 mm - Working width: 1,300 mm - Roller length: 1,450 mm - Working height: 900 +-20 mm - Roller diameter: 65 mm - Roller pitch: 125 mm - Adjustable feed (manual): 3-15 m/min - Installed power: 0.8 KW - Location: in storage

Condition: used, Year of construction: 2001, - Manufacturer: Bürkle - Type: SLC - Year of manufacture: 2001 - Right-hand operation - For single-sided application of lacquer - Oscillating application roller squeegee Technical data: - Maximum working width: 1300 mm - Conveyor belt width: 1270 mm - Workpiece thickness 3 - 120 mm - Installation length: ~ 800 mm - Width: ~ 2,800 mm - 1 piece, rubberized application roller, approx. D: 238 mm - Application roller Shore hardness: 45 (can be changed) - 1 piece, chrome-plated metering roller, D: 174 mm - 1 piece, counterpressure roller, D: 186 mm - Transport speed, adjustable from approx. 6 - 30 m/min. - Working height ~ 900 mm Dkedpfoyifwijx Aptot - Passage height approx. 3 - 80 mm - Compressed air 6 bar, G1/4 inch, approx. 50 NL/min. - Operating voltage 400 V, 50 Hz, 3 phases - Total connected load approx. 2 kW - With control cabinet - Weight approx. 1,400 kg - Location: in warehouse 32825 Blomberg

Condition: used, Year of construction: 2003, - Manufacturer: Cefa/Sorbini - Type: SMARTCOATER REVERSE MF - Two application units, one in REVERSE - Year of manufacture: 2003 - Working width: 1.300 mm - Working height: 880 mm - 940 mm - Workpiece height ~ 3 - 80 mm - Operating side: right - Paint application shaft 50 - 60 Shore - Roller diameter: 250 mm - Metering roller: 173 mm - Double diaphragm pump 1 piece for both application machines - Transport system with roller conveyor - Roller conveyor pitch: 150 mm - Roller diameter: 100 mm - Compressed air connection: 6 bar - Compressed air consumption: 54 NL/min. - Machine length: 1.640 mm - Machine width: 3.000 mm Djdpfszmh Erjx Aptokt - Mobile on flanged rollers - Feed speed: ~ 4 - 20 m/min - Application quantity ~ 4 - 50 g/m² - Machine weight 2.520 kg - Control cabinet on the machine, traveling with it - With chassis - Total power 5.5 W / 30 A - Volts, Hz 400 / 50 - Voltage fluctuations max. +/- 5% - Location: in stock

Condition: used, Year of construction: 2009, operating hours: 2,822 h, Hamm HD075K combination roller with only 2,822 operating hours! ---- * Manufacturer: Hamm * Type: HD075K * Year of manufacture: 2009 * Operating hours: approx. 2,822 * Operating weight: 7,650 kg * Power: 63 kW * Deutz diesel engine * Good condition! Dedjzy Tnfopfx Aptokt * Combination roller * Edge cutter * Water spraying system * First owner * Video available upon request (WhatsApp Erik) * Price: 24,900 euros, net + 19% VAT ---- For further questions, please call: Erik Kortum: WhatsApp All information is provided without guarantee, subject to errors and prior sale.

Condition: used, power: 60 kW (81.58 HP), gearing type: automatic, fuel type: diesel, operation weight: 7,430 kg, first registration: 06/2005, total width: 25,500 mm,

Condition: excellent (used), power: 23 kW (31.27 HP), fuel type: diesel, color: orange, first registration: 08/2017, Year of construction: 2017, operating hours: 3,032 h, General information Model year: 2017 Serial number: H2008891 Technical information Number of cylinders: 3 Drive: Wheel Weights Empty weight: 2.510 kg Carrying capacity: 185 kg GVW: 2.695 kg Functional Working width: 120 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Damages: none Financial information Price: On request Product safety Manufacturer: Hamm DE Other information Track width: 120 cm Additional information Dsdpfx Aszwmgpsptskt Please contact Ernst van Hek for more information = Additional options and accessories = - Power steering - Rotating beacon - Spotlight front - Spotlight rear = Remarks = Hamm HD12VV Tandem Roller (2017) Hours: 3,032 hrs | Operating Weight: 2,695 kg Engine: Kubota D1503 (22.9 kW / 31 HP at 2700 rpm) Condition: Excellent, fully tested and ready for work!

Condition: new, Year of construction: 2026, Adhesive application machine / Adhesive roller machine Dksdsd Iz Dfjpfx Aptot Brand: ORMA/Osama Type: I/213 (S2R-1300) Working width: 1,300 mm Maximum passage height: 100 mm Speed: 18 m/min Working height: 900 mm Diameter of application rollers: 185 mm Power rating: 0.5 Hp 0.37 KW Operating side: right Electrical system: 400 V/50 Hz/3 phases Technical features: - Structure of the adhesive application machine made of welded sheet metal. - 1 motor for driving the two rollers - Adhesive application rollers coated with acid-resistant special rubber, ground to shape and grooved, wear-resistant. - The thickness of the rubber layer can be ground to shape multiple times. - Special dampers on the roller supports, which allow automatic opening of the rollers to compensate for unevenness up to a maximum of 5 mm on the workpieces. - Adhesive dosing via a distribution trough made of zinc sheet. Easily removable for cleaning. - 1 handwheel for adjusting the roller gap - Safety guard for the rollers to prevent accidents - Electrical components according to the highest quality standard - CE standard

Condition: new, Year of construction: 2026, functionality: fully functional, Ball Roller Conveyor – Precise and Lightweight Multi-Directional Material Handling The ball roller conveyor is a specialized material handling solution designed for easy and precise maneuvering of workpieces in multiple directions. Thanks to its ball transfer units, it enables accurate positioning of workpieces of various sizes, significantly improving ergonomics and workflow efficiency at workstations such as band saws, cutting machines, CNC machining centers, and packaging machines. It is a practical, lightweight, and functional solution for supporting internal material handling processes. Key Advantages Multi-directional movement – ball transfer units allow workpieces to be freely moved in all directions. Compact design – its low weight and compact dimensions make it easy to position in confined workspaces. Height adjustment from 680–1100 mm – allows the conveyor to be adapted to different machines and workstations. Stable steel base – provides rigidity and safe operation. Easy operation – quick setup and intuitive height adjustment. Construction and Technology The conveyor is built on a rigid steel frame with a single transport module equipped with a ball transfer system. Each ball is mounted in a bearing housing, ensuring durability and virtually friction-free movement of workpieces in all directions. The design allows precise adjustment of the working height within a range of 680–1100 mm. With a working width of 400 mm, the conveyor can be used independently or as part of an integrated roller conveyor system. Precision and Productivity Unlike conventional conveyors equipped with straight rollers, the ball roller conveyor enables not only linear movement but also lateral and rotational movement of materials. This solution significantly simplifies workpiece positioning during cutting, marking, packaging, and machining operations. The operator can quickly and accurately position the workpiece, minimizing the risk of errors and damage. With a low weight of just 10 kg, the unit can be easily moved between workstations. Applications Ball transfer conveyors are widely used in industrial environments where the following are required: precise handling of large or heavy workpieces, intermediate material transport between workstations, material support during packaging, cutting, or machining operations, optimization of logistics processes in warehouses and production facilities. This type of conveyor works perfectly with conveyor lines, CNC machines, and assembly workstations. Standard Equipment Djdpfxjzwdr No Aptekt Ball transfer module with a working width of 400 mm, powder-coated steel construction, height adjustment from 680–1100 mm with locking mechanism, stable base with non-slip feet. Optional Equipment Transport wheels with brakes, ball transfer modules in other widths, connection systems for additional conveyors, rubber-coated ball surfaces for handling delicate materials. Technical Specifications Technical specification Value Working width 400 mm Height adjustment 680–1100 mm Transport dimensions (packaging) 480 × 445 × 150 mm Weight 10 kg