Used Roller Press for sale (35,374)

Condition: new, Year of construction: 2026, table width: 400 mm, table length: 4,200 mm, pressing force: 200 t, stroke adjustment: 60 mm, warranty duration: 24 months, stroke length: 60 mm, Equipment: safety light barrier, These presses and feeding lines, engineered for the door and window accessories sector and offered with both single and double operation capability, guarantee long-term, high-efficiency performance. In the window accessories industry—where high-volume production is essential—our presses, combined with our expertise, ensure maximum customer satisfaction. - Pressing force up to 400 tons - Table length up to 6000 mm - 2- or 3-connecting rod options - Automatic, constant fine lubrication with continuous return - Progressive lubrication block use - Front and rear press access - Sliding covers with magnetic sensors - Induction-hardened and ground gears - Gear-hub connections with conical locking PRESS: 200 TON STROKES: 40-70 RPM STROKE LENGTH: 60 MM MAXIMUM DIE HEIGHT: 340MM TABLE-RAM HEIGHT: 400MM ADJUSTMENT RANGE: 100MM Podpfxoxrbmys Aahjrc TOP TABLE DIMENSIONS: 400X3000MM BOTTOM TABLE DIMENSIONS: 400X4200MM MOTOR: 18.5 KW MOTOR SPEED: 3000 RPM

Year of construction: 2005, condition: ready for operation (used), General Data Measurements width 2020 mm Measurements depth 4025 mm Measurements height 2900 mm Machine weight 11800 kg Control Unit Brand AMADA Model CD 2005 Main Drive Spindle motor power 16.5 kW This 4-axis AMADA HFT 170-3 press brake was manufactured in 2005. It features a pressing force of 170 tons, a bending length of 3100 mm, and is equipped with AMADA CD 2005 CNC control. Despite a non-functional hydraulic pump, its main motor power is approximately 16.5 kW. Consider the opportunity to buy this AMADA HFT 170-3 press brake. Contact us for more information about this machine. Predpjxrhdlsfx Aahec Application Types Bending

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 26,426 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, punching force: 20 t, The punching machine is in good condition and has always been serviced on time by certified Amada service representatives. All documentation is included. The drum encoder was recently replaced. The machine is sold complete with software and tools. The punching machine is connected and can be tested on site. Specification: Year: 2004.07 Made in: France Operating hours: 26,426 Power-on hours: 65,006 Control unit: AMADA AMNC-F Punching force: 20 tons Stations: 45 Tools: sold with tooling Software: Linea 5 / Combi 5 (Only works with Windows XP) Sheet length: 2,500 mm Sheet width: 1,270 mm Sheet thickness: 3.2 mm Sheet repositioning: 5,000 mm Workpiece weight: 150 kg Dimensions: L 6080 x W 5120 x H 2318 mm Weight: 16,500 kg Location: Lithuania Test possible: Yes Psdpfow E Emajx Aaherc If you have further questions, we will be happy to answer them.

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Prodsfh Tmmepfx Aahjc Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: excellent (used), For sale, Form thermostat - Tool Temp TT-188 Max. heating temperature - 90°C Medium - water Power: 9850 Watts Prodovzb Nqjpfx Aahec The device has: - vacuum pump vaccum - vacuum tank - function of sucking the medium out of the mold - the device can be integrated with the machine, maintenance-free

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, punching force: 300 t, overall weight: 18,000 kg, Max. sheet size: 1060×740mm Min. sheet size: 400×360mm Stock range: Paperboard157~2000gsm Corrugated board (E,B LUTE) Min. gripper edge: 4mm Max. die-cutting size: 1040×730mm Max. pressure: 250tons Max speed: 7500sph Rules height: 23.8mm Main motor capacity: 11kw Total power capacity: 23kw Dimensions (L×W×H): 6000×4200×2400mm Net weight: 18,000kg Prsdpowhvq Iefx Aahjc

Condition: new, pressure: 125Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 11weight approx.: 8000messurements (LxWxH): 1800 x 1500 x 2600 Podoktm N Dspfx Aahorc

Year of construction: 1997, operating hours: 47,122 h, condition: ready for operation (used), Control Unit Brand DELEM Prsdpoxd H Tcofx Aahec Model DA-65 Additional Equipment Hydraulic clamping system This 6-axis TRUMPF Trumabend V170 press brake was manufactured in 1997. It features a bending force of 1700 kN and a maximum bending length of 4060 mm. The distance between uprights is 3680 mm, and it includes a hydraulic clamping system. Consider the opportunity to buy this TRUMPF Trumabend V170 press brake. Contact us for more information about this machine. Application Types Bending

Condition: like new (used), For sale: Hydraulic Press Brake REDCNC XD-5016 III Condition: New, unopened. Manufacturer: REDCNC Machinery Model: XD-5016 III A modern upward-moving table type hydraulic press brake designed for precise sheet metal bending. The equipment is built using high-quality components sourced from manufacturers in Japan, Germany, France, and Taiwan. Technical specifications: Nominal force (pressure): 500 kN (50 tons) Working table length: 1600 mm Distance between uprights: 1220 mm Throat depth: 405 mm Stroke length: 100 mm Max. opening: 370 mm Die height adjustment: 250–255 mm Approach speed: 52 mm/s Bending speed: 8 mm/s Return speed: 46 mm/s Number of cylinders: 1 Main motor: 4.5 kW (Siemens, Germany) Precision: ≤ ±0.01 mm (mechanical), ≤ ±0.02 mm (ram) Back gauge precision: 0.15 mm/m Hydraulic system capacity: 33 L Pedsxnmcrjpfx Aahsrc Weight: 1600 kg Dimensions (L × W × H): 1755 × 1440 × 2070 mm Features and equipment: – Upward-moving hydraulic operation principle ensures safe, reliable, and precise performance – Mechanical synchronization and roller guide system for increased accuracy – Upper beam crowning device for consistent bending precision along the entire length – CNC control with touchscreen display (Keyence Japan) – Electronic handwheel control for precise upper and lower tool positioning – Servo system (Mitsubishi Japan) ensures smooth and fast back gauge operation – Hydraulic system filled with Shell oil (USA) – Frame and cylinder components: Amada Japan – PLC Controller: Keyence Japan – Control system: NC9 Japan – Main electrical components: Schneider France, Panasonic Japan, Omron – Seals: NOK Corporation Japan Purpose: The REDCNC XD-5016 III press brake is designed for bending, forming, and fabricating sheet metal profiles. It is perfectly suited for small to medium-sized manufacturing, producing parts from steel, aluminum, copper, and other metals. Its robust frame, high-precision hydraulic system, and CNC control deliver excellent accuracy, repeatability, and performance. Advantages: – CNC control with touchscreen – Japanese and German components: Keyence, Siemens, Mitsubishi, Amada – High accuracy (±0.01 mm) – Compact size, reliable operation – Ideal for workshops with small to medium production volumes – Easy programming and simple maintenance If you have any further questions, please feel free to contact us.

Year of construction: 2012, condition: excellent (used), COLUMBUS Vacuform Standard High-performance vacuum pump BECKER Vacuum tank 200 l Digital pressure regulation Digital vacuum gauge Prsdpfxoxgg Tbj Aahsc Highly elastic natural rubber membrane Sturdy worktable Swivel castors with brakes Working dimensions approx. L x W 2900 x 1300 mm Pressing pressure max. 0.85 kg/cm2 = approx. 29 t Connected load 0.75 kW, 400 V 50 Hz Tank capacity 200 l CE Transport dimensions approx. L x W 3100 x 1550 mm Weight approx. 400 kg

Condition: excellent (used), I am selling in good condition the works of Schön 8LS. Prjdpfx Aasvbwfzohjc

Condition: like new (used), Year of construction: 2007, functionality: fully functional, Machine in excellent condition. Pressing force 200 t Table 1350 x 880 mm Stroke 320 mm Passage 1100 mm Podpfx Aasxrfkvohorc Machine length 2430 mm Machine width 2210 mm Machine height 3800 mm Machine weight 15000 kg

Condition: new, pressure: 150Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 15weight approx.: 9500messurements (LxWxH): 1800 x 1500 x 2600Stroke/min: 50-90 Machine Technical SpecificationsCE Compliance: The machine and all equipment are manufactured in accordance with CE regulations Light Curtains: SICK or PILZ PLC Control: Siemens S7-1200 Stroke Adjustment: Directly via the touchscreen interface Balancing System: Integrated Stroke Speed Adjustment: Via Mitsubishi frequency inverter Machine Frame: Full steel construction Guidance System: Inner and outer eccentric guides Crankshaft: Made of hardened 4140 steel Clutch & Brake: Pneumatic combination system Safety Valve: Dual-way safety valve Safety PLC: SICK or PILZ Predpfetqwtdex Aahjc Operation Modes: Two-hand operation and foot pedal available Lubrication: Automatic centralized lubrication system Overload Protection: Hydraulic overload system Safety Guarding: Protective enclosure around the working area External I/O: 8-pin I/O ports on PLC (for external connections and signal exchange) Anti-Vibration: Rubber dampers under the machine feet (1 pair – 4 pieces) Power Supply: 400 V / 50 Hz Required Fuse: 32 A Control Panel: 19 Siemens touchscreen ? Main Technical DataOperation Modes: Inch / Single stroke / Continuous stroke Press Force: 150 tons Table Dimensions: 750 × 1000 mm (fixed table) Stroke Length: 10–125 mm (automatically adjustable via PLC) Ram Dimensions: 500 × 800 mm (Ø55mm pin receptacle & T-slots customized to customer needs) Stroke Rate: 50–90 strokes per minute Main Motor: 15kW (1,400 rpm) Throat Depth: 325 mm Shut Height: 475 mm (adjustable down to 295 mm) Ram Bore Diameter: 50 mm Machine Dimensions:Length: 1,800 mm Width: 1,500 mm Height: 2,600 mm Machine Weight: approx. 9,500 kg Ram Adjustment: 40 mm (automatic adjustment)

Condition: excellent (used), CATALOG NUMBER 6933 TECHNICAL DETAILS - loading areas: 1 - front: manually adjustable clamping beams, 6 pcs - top: pneumatic pressing beams, 4 pcs - length of each pressing beam: 795mm - side: pneumatic clamps, 2 pcs - max length of glued components: 3300mm - max height of glued components: 1300mm - max thickness of glued components: 170mm - dimensions (L/W/H): 4200x800x1960mm - weight: 820kg ADVANTAGES Podpek Uxwwsfx Aahsrc – manufactured in Poland – mobile – unpainted – used press, very good condition Net price: 23,900 PLN Net price: 5,690 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the case of significant exchange rate fluctuations, the price may change)

Condition: new, Year of construction: 2023, ! Offers for customers from Baltic states only: Lithuania, Latvia, Estonia. Pjdsixz H Eopfx Aaherc A robust servo-controlled hydraulic system offers precision and high reliability for consistently accurate bending results. Programming of parts is quick and easy with intuitive touch screen control. There are 4, 5 or 7 axis press brakes available. Working length varies from 2000 up to 4000 mm, and the pressing force from 500 up to 3200 kN. Available tooling styles for PPED press brake: LVD style, W style or Univeral. Pressing force: from 500 kN up to 3200 kN Working length: from 2000 mm up to 4000 kN

Condition: ready for operation (used), Year of construction: 2021, operating hours: 4,846 h, General Data Podpfx Aoxq Htpeahsrc Measurements width 1470 mm Measurements depth 1550 mm Measurements height 2250 mm Machine weight 5400 kg Main Drive Pressing force 40 tons Bending length 1250 mm Number of axis 4 Movement X-Axis Movement 1000 mm Clamping Unit Max open daylight 455 mm This 4-axis Baykal APHS 125040 press brake was manufactured in 2021. It features a bending length of 1250 mm, pressing force of 40 tons, and a throat depth of 410 mm. The machine includes a main motor power of 5.5 kW and a hydraulic oil capacity of 140 liters. Consider the opportunity to buy this Baykal APHS 125040 press brake. Contact us for more information about this machine. Application Types Bending

Condition: excellent (used), pressing force: 5 t, I sell a Schling DUO 5T pneumatic press. Prjdpfx Aeudph Uoahec

Condition: used, The press is extremely stable thanks to its heavy steel construction, which is fully welded. The working surface of the press can be easily raised and lowered to any position by means of a hydraulic actuator. Additional tools are available and your own tools can be adapted. Specification: Prodpfeugtv Iox Aahsc Tonnage: 250 T Year: 1991 If you have any further questions, we will be happy to answer them.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,763 h, General Data Measurements width 1580 mm Measurements depth 2100 mm Measurements height 2545 mm Machine weight 5400 kg Main Drive Pressing force 600 kN Bending length 2100 mm Number of axis 4 Movement X-Axis Movement 1000 mm Prodexq Ht Nopfx Aahoc This 4-axis Baykal APHS 21060 press brake was manufactured in 2021. It features a pressing force of 60 tons, a bending length of 2100 mm, and a stroke of ram at 210 mm. With a throat depth of 410 mm and a distance between columns of 1600 mm, it's designed for precision. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 21060 machine we have for sale. Contact us for more information about this machine. Application Types Bending

Condition: used, Year of construction: 2008, Folding press Bystronic in very good condition. Sold with many tools. Machine tools are connected, can be tested, inspected. Podpfx Asqzxgmeaherc Specification: Model: Bystronic PR 400 x 6200 Year: 2008 Bending length: 6200 mm Tonnage: 400 T Tools: available If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 1997, The bending press was manufactured in 1997 in England by EDWARDS PEARSON. The folding press is in good condition, sold with tools. Always serviced and maintained on time. The machine tools are connected and can be tested and inspected. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3 100 mm Bending capacity: 100 T Travel: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1 , Z2 , R Tools: Available Podpjrfx Utefx Aahsrc Weight: 7 T Other: New screen recently replaced, keyboard attached for ease of use. If you have more questions, we will be happy to answer.

Condition: used, Year of construction: 1995, Specification: Model: Indumasch Year of manufacture: 1995 For metal up to: 6 mm Other: foot pedal, interchangeable dies Podpfx Aowql S Hsahorc If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2020, functionality: fully functional, For sale: Metal Stamping Press ALP-25C (25T, 2020) Condition: Virtually unused, like new. Manufacturer: JINAOLAN Machinery (China) Model: ALP-25C Year of manufacture: 2020-11 Podpfx Aasxmwniohorc A compact and reliable mechanical eccentric stamping press designed for forming, punching, and stamping various metal parts. Technical specifications: Nominal capacity: 25 T Stroke: 45 mm Stroke rate: 145 strokes/min (SPM) Max. die height: 180 mm Height adjustment: 35 mm Ram working area: 170 × 150 mm Bolster area: 370 × 240 mm Country of origin: China Applications: The ALP-25C press is suitable for: stamping, cutting, bending, and forming metal parts; small pressing operations in tool, metal structure, and automotive parts manufacturing; working with thin and medium-gauge sheet metal. If you have any further questions, please feel free to contact us.

Condition: new, Year of construction: 2021, functionality: fully functional, For sale: Metal Stamping Press JINAOLAN ALP-25V (25T, 2021) Pjdpexniw Ssfx Aahsrc Condition: Brand new, never used, original packaging. We use several of these presses in our factory—photos show those units. Two brand new units available. Manufacturer: JINAOLAN Machinery (China) Model: ALP-25V Year of Manufacture: 2021 Modern CNC-controlled eccentric press designed for forming, stamping, and punching various metal components. The press is equipped with a high-level operator safety system (Laser Safe), ensuring maximum operational safety. Technical Specifications: - Rated Capacity: 25 tons - Stroke Rate: 60–140 strokes/min (SPM) - Stroke Length: 60 mm - Max Die Height: 200 mm - Die Height Adjustment: 50 mm - Slide Area: 470 × 245 mm - Bolster Area: 680 × 300 mm - Main Motor: 2.2 × 4 kW - Max Air Pressure: 0.51 MPa - Max Tool Weight: 0.30 t - Control: CNC (programmable control unit) - Safety System: Laser Safe – two-hand control system Application: This press is suitable for stamping, punching, bending, and forming metal parts. Thanks to CNC control and precision mechanics, the machine ensures high productivity, repeatability, and safety. Ideal for small and medium-sized manufacturing, metal component, and forming part production. Advantages: - Completely new, factory-sealed equipment - CNC control: precise and user-friendly programming - Laser Safe system: press can be lowered only when both hand controls are activated (two-hand safety) - Reduces risk of injury, complies with stringent safety standards - Robust construction and stable eccentric drive - 2 brand new presses in stock + several used units in operation If you have further questions, we are happy to answer them.

Year of construction: 2012, condition: used, Profiling line T8. The line has been used very little and is in excellent condition. Specification: Manufacturer: Rollsett Made in: Finland Year: 2012 Produced profile: T8 Other: Automatic unloading table included in the set. Training and installation can be provided on request. Pjdpfx Aaoxdl Huohorc If you have further questions, we will be happy to answer them.