Used Rolling Hollow for sale (7,877)

Condition: used, Thread rolling machine UPWS 25. Rodpezd Rf Nsfx Abpecf

Condition: new, Year of construction: 2026, Equipment: safety light barrier, 1A Gmatick Storage Paternoster (roll rack) Rsdjff Huwepfx Abpecf The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: used, Year of construction: 1973, functionality: fully functional, machine/vehicle number: M14L/9094, Offer Number: M14L/9094 Rjdpfx Aezwqh Rsbpecf Machinetype: thread rolling machine - flat die Make: MENN Type: GW32 Constr. year: 1973 diameter range: 1,6-4 mm shaft length under head: 50 mm max. thread length: 30 mm output pieces/min: 300-750 Location: In our warehouse

Condition: ready for operation (used), 1 x Davi round edge rolling machine / plate rolling machine / iron four-roll bending machine / 4-roll machine (English: Davi 4-roller bending machine) 4 rolls, 3.6 m x 95 mm thick. Video available via WhatsApp/Messenger/Viber. Inspection welcome near D-24983 Handewitt. Year of manufacture 2009 - in operation since 2010. Rsdpfeymnzbsx Abpocf More information available upon request.

Condition: used, empty load weight: 3,100 kg, maximum load weight: 14,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2006, next inspection (TÜV): 01/2027, suspension: air, tire size: 235/75 19,5, color: black, Year of construction: 2006, front tire size: 235/75 19,5, rear tire size: 235/75 19,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Vehicle number for inquiries: 41702 Mueller, Mitteltal, Roll-off trailer * Year of manufacture: 2006 * ABS, Anti-lock Braking System * Air suspension * Air connection, Duomatik system * Inspections: MOT / Emissions test valid until 01.2027 * Suspension: Air * Gross vehicle weight: 18,000 kg * Tare weight: 3,100 kg Rjdpfx Ajzxa Icobpecf * Payload: 14,900 kg * Permissible gross vehicle weight: 18,000 kg * Axle manufacturer: BPW * Tire condition 1st axle: -- - Tire size: 235/75 R19.5 * Tire condition 2nd axle: -- - Tire size: 235/75 R19.5 * Tire size: 235/75 R19.5 * Pneumatic locking system * Tires: 235/75 R 175 * Suitable for containers up to 7 meters * Loading with a forklift possible Disclaimer: Subject to changes, prior sale, and errors. More pictures and videos can be found on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and uncomplicated financing * Application for all (export) documents * Ordering export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained specialists, we will be happy to advise you.

Condition: used, Year of construction: 2015, color: blue, overall weight: 15,000 kg, maximum load weight: 13,650 kg, empty load weight: 1,350 kg, loading space volume: 4 m³, loading space width: 2,400 mm, loading space length: 4,500 mm, loading space height: 500 mm, mileage: 1,001 km, first registration: 01/2015, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors. Body: Roll-off container with wing doors, approx. 4.2 m³. Locking dimension: 2,890 mm. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Rcsdpfezw N Icsx Abpsf

Condition: used, mileage: 1,56,000 km, power: 300 kW (407.89 HP), first registration: 08/2008, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: semi-automatic, emission class: euro5, Year of construction: 2008, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), soot filter, * Mercedes-Benz Actros 3241 roll-off tipper + crane * First registration: 08-2008 * Drive: 8x2x6 * Semi-automatic transmission with clutch Rodpszw S Hnofx Abpocf * EURO 5 * Air conditioning * Atlas 165.2E-A3 + radio remote control * 5 + 6 control circuits for the grab * Crane operating hours: 2,738 h * Roll-off system VDL S-21 - 6400 * Hydraulic under-run protection * More pictures and videos available via WhatsApp * Information without guarantee, subject to prior sale.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, ORT Italia Netting Machine Rsdpszb Imasfx Abpscf CE Certified Model RP 18/U Year 2012 Siemens SIMATIC OP17 CNC Control Panel Reference F24 €9,500 (including transport)

Condition: used, Year of construction: 2015, color: blue, overall weight: 15,000 kg, maximum load weight: 13,650 kg, empty load weight: 1,350 kg, loading space volume: 4 m³, loading space width: 2,400 mm, loading space length: 4,500 mm, loading space height: 500 mm, mileage: 1,001 km, first registration: 01/2015, gearing type: other, driver cabin: other, Vehicle location: en route / in transit, steel body, doors Body: Roll-off container with hinged doors, approx. 4.2 m³. All information provided without guarantee, as the vehicle is en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors! Rcedpfx Abozw N H Sopof

Condition: used, Year of construction: 2007, total length: 5,810 mm, total width: 1,980 mm, total height: 1,540 mm, Colour: Blue Empty weight: 11.500 kg Price: On request - Year: 2007 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 600007090 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 - Power [kW]: 15.0 - Max. sheet thickness [mm]: 13 Rcodpfezw A Suox Abpsf - Max. prebending thickness [mm]: 10 - Max. working width [mm]: 3100 - Top roll diameter [mm]: 280 - Bottom roll diameter [mm]: 280 - Bending speed [mm/min]: 5000 - Options: Cone rolling, Digital readout - Transport dimensions: 5815mm x 1985mm x 1540mm (l x w x h) - Transport weight [kg]: 11500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2015, operating hours: 2,600 h, functionality: fully functional, machine/vehicle number: 15243485, type of input current: three-phase, total width: 3,600 mm, total length: 39,700 mm, total height: 1,900 mm, input voltage: 380 V, overall weight: 19,700 kg, The line consists of double decoiler, pre-heating section, set of forming rollers, foaming machine, polymerization bench, cutting system with flying saw, belt conveyor, stacking bench with return and a control panel. The line is equipped with a COMBI system allowing quick profile type changeover. The line produces two profiles: 1. H39mm, coil width 120mm, thickness 0.2-0.25mm 2. H45mm, coil width 136mm, thickness 0.2-0.25mm Technical Specifications: - maximum line speed - 36 m/min - maximum profile length - 6.5 m - maximum coil weight - 500 kg - the line power consumption approx. 36-40 kW Rodpfjzwb D Nox Abpecf IMPORTANT: the line currently produces only non-perforated profiles. However, perforated module can be integrated into the line for extra cost

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 13137, Capacity: approx. 50-56 kg/h (depending on the dough, filling, etc.) Overhaul year: 2026 – new electronics, housings, insulation, gas reducer, all bearings + motors are new or refurbished. Model: EWB 2/2 Redpfx Abezwmz Hjpecf Two dough belts. Set including a dough tank and pumps – stepless speed control via a frequency inverter. Power source: CNG/LPG 50 Hz, power: 5.3 kW

Condition: used, first registration: 06/2007, color: grey-black, Year of construction: 2007, gearing type: other, LICENSE PLATE: AE26827 TITLE: ROAGNA PNEUMATIC SWAP BODY TRAILER REF: 25R23 Rodpfx Asxwz Emobpocf YEAR: 06/2007 AXLES: 2 WHEELBASE: 4500 MAXIMUM LENGTH: 9.26 m COUNTRY: Italy PAYLOAD: 16,200 kg - TRAILER: 20,000 kg at full load BODY TYPE: swap body BODY MODEL: ROAGNA ADR: yes BODY DIMENSIONS FROM: 5.00 m + 0.20 m TO: 7.00 m + 0.20 m SUSPENSION: pneumatic BRAKES: drum brakes TIRES: 285/70 R 19.5 ACCESSORIES - operates with the tractor unit's hydraulic lines RECONDITIONED: no INSPECTION: 28/02/2025 TIRE CONDITION: 30% PRICE: €7,500.00 + VAT. Errors and/or omissions excepted. The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA SWAP BODIES operates in the sale and purchase of industrial and commercial vehicles, specializing primarily in the waste management sector. Specialized in trucks, trailers, and swap body equipment. With an immediately available fleet of over 50 trucks and over 150 swap bodies, containers with and without cranes. S.E.&O Given the quantity of advertisements and details included, Aurora invites you to verify the accuracy of the data with the sales staff.

Condition: used, functionality: fully functional, mileage: 6,27,670 km, first registration: 09/2011, fuel type: diesel, empty load weight: 14,600 kg, maximum load weight: 25,400 kg, overall weight: 40,000 kg, tire condition: 50 %, axle configuration: 8x4, wheelbase: 4,250 mm, fuel: diesel, fuel tank capacity: 300 l, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, total length: 8,050 mm, total width: 2,550 mm, Equipment: ABS, air conditioning, Mercedes Benz Actros 4144K TAM T40-54 roll-off tipper 8x4 Rodpfxezw H Ele Abpscf leaf-sprung suspension differential lock manual gearbox GVWR 40,000kg - payload 25,400kg Euro 5 overall truck length 8.05m wheelbase 4.25m ABS tires 70%-80% remaining 300L tank sun visor central locking air conditioning air-suspended driver's seat electric windows and exterior mirrors all information subject to change without notice / errors and omissions excepted

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, DESCRIPTION: Rjdpfxszvaibe Abpjcf Complete production process: hydraulic uncoiling, guided feeding, roll forming, hydraulic post-cutting, and automatic run-out/stacking. Profile-specific tooling for TR153 / 290 / 870 high-profile sheets. Full mesh safety guarding around the main forming section. Siemens PLC/HMI control and Schneider frequency-controlled main drives. Profile: TR153 / 290 / 870 Standard sheet thickness: 0.70-1.50 mm Feed coil width: 1,500 mm Overall / effective width: 900 mm / 870 mm Profile height / pitch: 153 mm / 290 mm Maximum profile length: unlimited Working speed: 15 m/min Location of the line: Serbia

Condition: used, Year of construction: 2021, color: blue, overall weight: 15,000 kg, maximum load weight: 12,540 kg, empty load weight: 2,460 kg, loading space volume: 23 m³, loading space width: 2,400 mm, loading space length: 4,500 mm, loading space height: 2,200 mm, mileage: 1,001 km, first registration: 01/2021, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors. Rsdpjzw N Iijfx Abpscf Body: Roll-off container with wing doors, approx. 4.2 m³. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, functionality: fully functional, Year of construction: 2000, color: red, Material / tool or workshop container with 3 aluminum roller shutters on each side, and a tailgate at the rear. Various drawers, pull-out tables, and ramps. In good, well-maintained condition. Redpfxezv Dy Do Abpscf Loading possible.

Condition: used, mileage: 1,001 km, first registration: 01/2009, color: black, driver cabin: other, gearing type: other, Year of construction: 2009, Vehicle location: en route / in transit, hydraulic cross-locking system. Body: 21-ton roll-off system, Hiab Multilift XP21Z59 for containers up to 7m. Rcodozwd Iwspfx Abpef ACCESSORY INFORMATION IS WITHOUT GUARANTEE; subject to change, prior sale, and errors!

Condition: used, maximum load weight: 18,500 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 02/2013, next inspection (TÜV): 03/2027, loading space length: 7,800 mm, loading space width: 2,550 mm, total length: 10,253 mm, total width: 2,550 mm, Year of construction: 2013, Equipment: ABS, Jung T2MA24L ADONIS | 3-axle trailer | 3 x Mercedes-Benz axles | Duomatic | Twin tires VIN: HJ08228 CHASSIS / COMPONENTS * 3 axles Rjdpfx Abozwav Depscf * 3 x Mercedes-Benz axles * Air suspension * Lifting and lowering * Pneumatic chain tensioner * Pneumatic drawbar lowering * Disc brakes * ABS * Duomatic connection * ABS electrical connection * 15-pin electrical connection Wheelbase axle 1-2: 4,320 mm * Wheelbase axle 2-3: 1,400 mm DIMENSIONS * Overall length incl. drawbar: approx. 10,253 mm * Chassis length: approx. 7,800 mm * Rear overhang: approx. 1,235 mm TIRES * Tires: 265/70 R19.5 * Twin tires * Axle 1: approx. 10/60 + 10/60 % * Axle 2: approx. 40/40 + 30/30 % * Axle 3: approx. 60/60 + 60/60 % WEIGHTS * Permissible total weight: 24,000 kg * Tare weight: 5,500 kg * Payload: 18,500 kg OTHER * Year of manufacture: 2013 * First registration: 21.02.2013 * MOT: 03/2027 * Inspection: 09/2026 New MOT/inspection and weight adjustments (increase or decrease) are available upon request. We won't leave you alone, even after the purchase: We will help you obtain export or short-term registration plates. We can also arrange for the transport of your vehicle within Germany. Just contact us – we will be happy to assist you! We speak German, English and Russian. All information is without guarantee. Subject to change, errors, printing and typographical errors and prior sale. About us: Leible Nutzfahrzeuge is a family-run company based in Kehl on the Rhine. For many years, we have stood for experience, reliability and competence in the field of preparation and distribution of commercial vehicles. Our strength lies in the purchase and sale of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a variety of applications. With us, it's not just about the vehicle, but also about the service behind it. Fairness, integrity and customer satisfaction are our top priorities. That's why we support you personally and reliably – from the first contact to the handover of your vehicle. See for yourself. We look forward to your inquiry! Our service for you: Vehicle loading We will help you load your purchased vehicles. Special transport We will support you in organizing special transports. Export and short-term registration plates We will help you obtain export or short-term registration plates. Customs formalities We will also support you with customs matters. Vehicle transport If desired, we will arrange for the transport of your vehicle within Germany.

Condition: used, Year of construction: 2008, Control SINUMERIK 840 D rolling power 800 kn diameter max. Werkstück: 250 mm work piece width 80 mm spindle diameter 110 mm 100-700 1/min power capacity 110 kW length 2600 mm width 2600 mm height 2600 mm weight 12,5 t Rcjdpfxoztfwle Abpof Mandrel diameter: 45–100 mmScope of deliveryCentral lubrication, stepless speed control, proportional measuring system, linear mandrel guide, process monitoring for the mandrel, process data management, rolling equipment, distributor 130–190 mm

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: 9730010, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 340 mm, side roll diameter: 300 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 25 mm, sheet thickness copper (max.): 25 mm, overall weight: 9,000 kg, total length: 5,500 mm, total width: 1,600 mm, total height: 1,500 mm, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 3-roll hydraulic plate bending machine with pre-pinch Model MCO3034 Davi capacity 3000x20 mm -Plate width 3000 mm -Capacity rolling 20 mm -Prebend 16 mm Rodpfx Abjzwuu Ujpscf ----- TECHNICAL DATA Top roll 340 mm Surface on the rolls 3050 mm MINIMUM ROLLING DIAMETER ID 430 MM depending on plate thickness and plate yield strength CONFIGURATION: -Rolls hardened high strength surface -Conical plate bending attachment hydraulic -Digital position readouts 2xplate support left and right side hydraulic ( see photo ) -3 rolls driven hydraulic powered with individual motor & gear box on each roll. -Parallelism between top and bottom rollers by torsion bar. -Rolls installed on bearings -Overload safety hydraulic protection of the rolls -Synchronized speed hydraulic rotation of the rolls. -Hydraulic unit self enclosed into the machine. -Speed infinitely variable control with leverage hydraulic distributor -Centralized operator control panel hinged on the front floating left right -Emergency shutdown and safety stop system -Manuals original

Condition: used, mileage: 2,08,400 km, power: 243 kW (330.39 HP), first registration: 11/2011, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: orange, gearing type: mechanical, emission class: euro5, total length: 7,360 mm, total width: 2,500 mm, total height: 3,600 mm, Equipment: all wheel drive, * Iveco Trakker AD 190T33W/P, Abroller Marrel TH 12D, Winterdienst * hydr. Verriegelung * Anbauplatte vorne mit 4 x hydr Anschlüssen * Zusatzbeleuchtung * Sonnenlbende * Lampenbügel mit 4 x Scheinwerfer * Vorrüstung für Rundumlicht * Schleuderketten * AHK + DL Anschlüsse * Arbeitsbeleuchtung * Kranhydraulik Anschlüsse * Zentralschmierung * Staubox * Salzstreuerhydraulik Anschlüsse * Frontscheibenheizung * Steuerung für Anbauplatte * Radstand ca. 4,50 m * Euro 5 * Schaltgetriebe * Klima * Federung: Blatt/Luft * Differenzialsperren * el. FH * el. Spiegel * Multifunktionslenkrad * Tempomat * Standheizung * Allrad * 2 x Luftsitz * Reifen 385/65R22,5 ca. 80% * 315/80R22,5 ca. 70% * deutsches Fahrzeug * Behördenfahrzeug * gegen Aufpreis mit Küpper Weissser Salzstreuer, Schneepflug, Abrollcontainer Rcodjzwyl Sopfx Abpsf * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * WhatsApp

Condition: good (used), Year of construction: 1986, Hollow Spindle Oil Country Lathe SARO SBF 710X2000 Made in Romania Year of manufacture: 1986 Main technical data: - Max. diameter passing through main spindle: 263.3mm - Max. swing over guideways: 710mm Redpfxeumtbro Abpecf - Max. swing over cross slide: 400mm - Max. swing in gap: 950mm - Length between centres: 2000mm - Main spindle speed range: 4 – 500 rpm - Main motor power: 22 KW - Machine weight ab. 6,3ton The machine is in good condition. The electric equipment was changed with new one. For more information please contact us.

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, spindle bore: 250 mm, Oil country lathe SARO SBF 7/3000 Max. diameter: 700mm Rcsdpszt Irxsfx Abpsf Spindle hole: 250mm Turning length: 3000mm ✅ Working condition ✅ New electrical panel ✅ Full documentation

Condition: used, functionality: fully functional, Year of construction: 1999, load capacity: 3,500 kg, Paper roll clamp ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Technical condition: good Description: Year: 1999 ISO 4A (61 cm) Capacity: 3500 kg Opening range: 250-1300 mm Rotator ID: OS2048 Rodpfxszlvmus Abpocf