Used Threaded Bolt for sale (4,117)

Condition: used, Year of construction: 1987, functionality: fully functional, shaft length under head: 160 mm, thread length: 85 mm, total width: 2,800 mm, total length: 7,800 mm, bar diameter (max.): 16 mm, Machine is complete bolt making machine with pointing and threading. Pedsztrpnspfx Airsrc

Condition: good (used), Lubricating bolt for rope pulley, steel rope pulley, rope deflection pulley, crane rope, four-rope orange peel grapple, polyp grapple, mechanical orange peel grapple, shell grapple, ship unloading grapple, scrap grapple, garbage grapple, rope grapple, digging grapple, bolt crane bolt, lubricating bolt -Grease bolt: thread M30 -Shaft: Ø 39.6 x 80 mm -Number: 9x bolts available -Price: per piece Predpfx Aijv Ilqxsrsc -Dimensions: Ø 60 x 125 mm -Weight: 1.3 kg/piece

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Manufacturer: Ridgid, Universal Thread Cutting Head 1/8 to 2 inch Predozlf Rcepfx Airec -Pipe size: 1/8 to 2" -Bolts: 1/4 to 2" -Dimensions: 280/240/85 mm -Weight: 5.8 kg

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Manufacturer: Ridgid, threading head -Pipe size. up to 3" Quantity: 1 piece available -Dimensions: 350/270/H90 mm Podpfx Aoi Exqueirorc -Weight: 7.9 kg

Condition: good (used), Threaded spindle, threaded rod, threaded bolt, threaded rod, spindle, trapezoidal threaded spindle -Threaded spindle: Trapezoidal threaded spindle -Thread: Diameter 70 mm -Gradient: mm -Thread length: 650 mm -Dimensions: see photos Pjdpfx Aisza Tgvsrerc -Dimensions: Ø 70 x 650 mm -Weight: 16.5 kg

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Manufacturer: Ridgid, Thread cutting head model 5008 Prsdpfx Aieyquwqjrsc -Pipe size: 1/4 to 1" -built-in cutting jaws: 1" -Dimensions: 190/240/H75 mm -Weight: 3.4 kg

Condition: good (used), Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head, thread cutting chuck -Manufacturer: Efem, thread cutting head thread cutter four-jaw chuck type G3 -Cutting jaws: not included -Bore: Ø 27 mm -Hole: Ø 40 mm -Dimensions: 160/130/H175 mm Pjdev T Ufcspfx Airerc -Weight: 3.8 kg

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head Psdjix Rcdjpfx Airsrc -Manufacturer: Ridgid, Thread cutting head model 811A 1/8 to 2 inch -Pipe size: 1/8 to 2" -Bolts: 1/4 to 2" -Dimensions: 260/240/H70 mm -Weight: 5.6 kg

Condition: good (used), Toggle bolt, anchor hook Pedpfx Asb A H Uqsirjrc -Type: EKD-HM5 -Quantity per package: 25 pieces -M4 threaded rod Price: per package -Number of packages: 21 -Weight: 1 kg/package

Condition: good (used), Toggle bolt, anchor hook Psdpfx Aijb A Hibererc -Type: EKD-HM4 -Quantity per package: 50 pieces -M4 threaded rod -Price: per package -Number of packages: 12 -Weight: 1.2 kg/package

Condition: good (used), Threaded rod, threaded bolt, threaded rods according to DIN 975 -Diameter: M24 -Threaded rod: galvanized Psdpfocd Emysx Airorc -Quality: 4.8 -185 pieces, length: 2000 mm, price per piece: 15 EUR net -19 pieces, length: 3000 mm, price per piece: 20 EUR net

Condition: used, Year of construction: 1989, machine/vehicle number: 921, overall weight: 3,500 kg, type of input current: three-phase, ORT Italia RP20 hydraulic rolling machine for creating threads, knurls, and profiles through cold forming. Manufacturer: ORT Italia Model: RP20 Serial number: 921 Year: 1989 Number of rollers: 2 Maximum rolling force: 20 tons Maximum workpiece diameter: 60 mm Spindle speeds: 25, 40, 55, 65, 85, 105, 135 and 220 rpm Power supply: 380 V three-phase, 50 Hz Control: hydraulic / electromechanical Pedpfs Afaa Njx Airorc Machine complete as shown in the photographs. Inspection possible at our warehouse. Loading onto the transport vehicle is the seller’s responsibility. Transportation is the buyer’s responsibility.

Condition: ready for operation (used), Year of construction: 1989, operating hours: 2,100 h, functionality: fully functional, thread length: 880 mm, feed length X-axis: 1,000 mm, feed length Z-axis: 100 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 5 m/min, position of the milling head: Horizontal, swivelling, center height: 1,060 mm, type of input current: AC, power of feed motor: 4,000 W, milling spindle length: 200 mm, spindle bore: 90 mm, spindle speed (max.): 400 rpm, spindle speed (min.): 25 rpm, mandrel length: 200 mm, collet bore: 90 mm, clamping length: 880 mm, workpiece diameter (max.): 500 mm, Thread Milling and Gear Hobbing Machine MSZ 5A352ПФ2 The MSZ model 5A352ПФ2 is a universal thread milling and gear hobbing machine, designed for machining splines, worms, and cylindrical gears by milling and hobbing processes. Manufactured in 1984, the machine is intended for industrial applications requiring reliable performance, versatility, and repeatable accuracy. The machine is suitable for workpieces with a maximum length of 1000 mm and a maximum diameter of 500 mm. The maximum machining (spline/thread) length is 880 mm, and the machine supports gear cutting up to module 8, covering a wide range of thread and gear machining tasks. Helix and thread angles up to 30° can be machined, allowing flexible use in mechanical engineering and transmission manufacturing. The milling and hobbing spindle features a 90 mm spindle bore and supports cutting tools with a maximum hob diameter of 160 mm and a maximum hob length of 200 mm. The spindle operates in a speed range of 25 to 400 rpm, providing suitable cutting conditions for different materials and tool diameters. The main drive motor offers multiple power and speed stages (5 / 6.3 / 10 kW at 750 / 1000 / 1500 rpm). The machine is equipped with stepless longitudinal and radial feeds, with longitudinal feed rates from 2 to 100 mm/min and radial feed rates from 2 to 50 mm/min, enabling precise control during machining operations. The milling head is horizontal and swivelling, and the machine allows accurate synchronization for thread milling and gear hobbing operations. With overall dimensions of approximately 3100 × 2270 × 2100 mm (up to 3540 × 2515 × 2100 mm with auxiliary equipment) and a total weight of about 7890–8500 kg, the 5A352ПФ2 features a rigid, heavy-duty construction that ensures excellent stability and vibration damping. The machine operates on three-phase AC power (380 V, 50 Hz) and is equipped with a PU F5007 control system. Condition: *Used machine *Ready for operation *Fully functional *Operating hours: approx. 2,100 h Scope of delivery: *Complete set of change gears *Technical passport (Russian) *Operating manual (Russian) Typical applications: Predpex Unpvsfx Airoc *Thread milling *Gear hobbing (spur gears, worms) *Machining of transmission components *General mechanical engineering *Repair and small- to medium-series production

Condition: used, The REMS Magnum pipe threader is suitable for pipes from 1/4" to 2". The following threading dies are included: - 3x: R1/2 - 3/4 - 5x: R1 - 2 The unit has been function-tested and comes with an electrical inspection carried out by a professional electrical company. Prjdpfxez Nlfgo Airjc

Condition: used, Year of construction: 2013, pressure 20 - 600 kN adjustment of rolling slide 2 x 90 mm diameter of rolling spindle 120 mm roll spindle height over machine bed 200 mm Control SIN 840 D taper length of the roll spindle 200 mm rolling spindle turning speeds 0 - 34 1/min torque per rolling spindle 6.160 Nm power capacity 2 x 8,4 kW distance between rolling spindles min. 271 / max. 368 mm rolling tool outer diameter max. 300 mm Psde Afar Espfx Airerc total power requirement 26 kW weight of the machine ca. 7,1 t dimensions of the machine ca. 9,70 x 4,50 x 3,80 m CNC machine for gear cold rolling / thread rolling Felsomat loader cell Complete housing

Condition: ready for operation (used), Year of construction: 2012, Wiemers AT 12 II Air Tapping Pneumatic Tapping Arm Thread Cutter Year of manufacture: 2012 Operating pressure: 6 – 7 bar Air consumption: approx. 750 l/min Thread size: M3 – M12 Description has been adopted as provided. You are welcome to arrange a viewing appointment. We can also organize cost-effective shipping for you! Prjdpfx Aoymkrvoiroc You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID is supplied. Subject to prior sale. Visit our shop to see our full range of offers. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and product description purposes. Please note that deviations from technical data as well as errors in the item description may occur and are subject to change.

Condition: like new (used), Year of construction: 2021, operating hours: 900 h, functionality: fully functional, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, spindle diameter: 200 mm, Equipment: documentation/manual, Mazak Integrex J200s Year 2021 Pjdjzz Rt Uepfx Airjrc Control unit: Smooth G Distance between spindles: 1000 mm Maximum machinable diameter: 500 mm Maximum bar capacity: 65 mm X-axis travel: 450 mm Y-axis travel: 200 mm / +- 100 mm Z-axis travel: 960 mm Maximum spindle speed: 4000 rpm Spindle taper: A2/6 Spindle bore (main spindle): 76 mm Tool magazine capacity (automatic tool changer): 36 Capto Chip conveyor: Mayfran belt type

Condition: like new (used), Year of construction: 2012, functionality: fully functional, Clamping table, head adjustable by 400 mm, as new, high-performance thread cutting machine up to M10. Prodpfxezycraj Airjc

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 0049, overall weight: 12,000 kg, Manufacturer: Profiroll Type: UWRA 160S Podpfx Aioz Tznrjrjrc Control system: Siemens Machine type: Ring rolling machine Pressing force: 63 t Max. outer diameter of round parts: 160 mm Dimensions: 80 mm Roller bore: 30/100

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 308, Technical characteristics: ⚙️ Core Specifications Attribute Value Thread Diameter Range: 3 mm to 75 mm Rolling Pressure: 0.5 to 20 tons Max Thread Length (Plunge): 160 mm Max Thread Length (Through): 2000 mm Speed Range: 24 to 114 rpm (8-step gearbox) Tool Diameter: 145 mm to 200 mm Roll Spindle Diameter: 54 mm Shaft Distance: 130 mm to 200 mm Machine Dimensions (L×W×H): 1880 (INCLUDING HYDRAULIC UNIT) × 991 × 1270 mm Weight: ~1.6 tons 🧰 Features & Capabilities Podpjxx Nuxofx Airjrc Variable Rolling Pressure: Adjustable to suit different materials and thread profiles. Heavy-Duty Construction: Built for long-term industrial use with high repeatability. Manual or Semi-Automatic Operation: Depending on configuration and accessories. Machine status: WORKING

Condition: used, REISHAUER US is a Thread grinding machine of high precision, engineered for superior accuracy and reliability. Capacities: grinding length 450 mm; clamping 1055 mm; max Ø 250 mm; thread Ø 2–250 mm; spindle bore 45 mm; weight on centres 200 kg; pitch ≤100 mm; angles ±40°; module ≤10; wheels Ø280–350 mm, width 4–40 mm. Specs: wheel speeds 6 steps 1700–2540 rpm; work spindle 27 steps up to 160 rpm; 3×380 V 50 Hz; grinding spindle 4 kW; total 15 kVA; machine ≈4700 kg; footprint 3300×1930×1800 mm. Accessories: coolant, wheel set, flanges, gear set, centers, oil-mist extractor. Achieves tight tolerances; suitable for automotive, aerospace, watchmaking, machine tools, medical. Prjdpfx Ajz Dbh Eoiroc

Condition: used, Two used Sortimo Globelyst shelving systems for professional vehicle outfitting. The shelves come from a VW T6. This is a two-part set (1 smaller shelf, 1 larger shelf, including an integrated work/intermediate surface and accessory profiles, on a pallet). Dimensions & Details: • Small shelf: o Height: 1.20 m o Length: 1.23 m o Depth: 0.38 m • Large shelf: Predj Afyckepfx Airsc o Height: 1.64 m o Length: 1.47 m o Depth: 0.38 m Condition: The outfitting is used and shows clear signs of wear (scratches, dirt, see pictures), but it is absolutely stable, fully functional and ready for its next use. High-quality Sortimo quality made from aluminum and steel. Scope of supply: Both shelves are sold as shown in the pictures, including the small parts and rails visible in the pictures, on a pallet. Important notes: • Pick-up only (assistance can be provided with loading upon arrangement). • The sale is without guarantee or warranty. No returns or exchanges. If you have any questions or are interested, just send a short message!

Condition: good (used), functionality: fully functional, 1 x Drilling and threading machine WMW Heckert Mikromat Well-maintained machine with complete accessories + coolant pump Podpfx Aiszzz E Iorsrc Technical data: Spindle speeds: 90 - 710 rpm (7 steps) Thread sizes: M6 - M30 Pitches: 1.0 - 3.5 mm The machine can be inspected while powered on.

Condition: good (used), functionality: fully functional, current model HG 36 Thread-cutting capacity in ST 60: M10 - M 36 Prjdpfx Aijz Ig Tnerec Drill chuck taper: B24 Motor power: 3 kW 6 speeds: 19 – 95 rpm

Condition: used, Offered: Mechanical tapping machine with change-gear feed. Equipped with T-slot worktable, tool holder, mechanical operating levers, foot switch and emergency stop button. Inspection possible by appointment. Predpfxj Afzakj Airsc