Used Roofer Elevator for sale (804)

Condition: new, functionality: fully functional, machine/vehicle number: 1.161-070.0, working width: 510 mm, area performance: 2,805 m²/h, overall weight: 345 kg, warranty duration: 24 months, water tank capacity: 70 l, battery capacity: 105 Ah, Technical specifications: Condition - NEW! Catalog number: 1.161-070.0 Drive type: Battery Drive: Traction motor Brush working width (mm): 510 Vacuum working width (mm): 900 Fresh/dirty water tank capacity (l): 70 / 75 Theoretical area coverage (m²/h): 2805 Battery (V / Ah): 24 / 105 Charger power supply (V / Hz): 95 – 253 / 50 – 60 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 13 / 20 Ffedpfx Aoxn I Suefpeu Water consumption (l/min): max. 2.3 Sound pressure level (dB(A)): 66 Gross weight (kg): 345 Weight without accessories (kg): 100 Dimensions (L × W × H) (mm): 1310 × 590 × 1060 Scope of delivery and equipment: SONNENSCHEIN 12V 105Ah GEL BATTERIES (2x). NEOS 24V 10A EXTERNAL CHARGER 900mm V-shaped suction bar with oil-resistant polyurethane rubbers 510mm red disc brush - medium hard Features: Powerful drive Automatic water stop Solenoid valve 2-tank system Batteries and charger included: - Sonnenschein 105Ah batteries + Neos 24V charger included in the set - Easy charging at any standard outlet. - Mains-independent use without tripping hazards. Advantages: - Self-explanatory symbols and a clear control panel. Short training phases. Easy operation thanks to a small number of yellow-coded controls. - Robust construction with integrated disc brush head. High surface performance thanks to a large working width. Brush changes are made via pedal ejection. - Particularly maneuverable machine. Good overview of the surfaces to be cleaned. Easy transport. Key features: - Thanks to its slim and compact design, our battery-powered ride-on scrubber-dryer BD 50/70 R Bp Pack Classic with disc brush technology is extremely easy to maneuver and transport – even in elevators, for example. This positions the affordable entry-level model, powered by powerful 105 Ah batteries, as a viable alternative to walk-behind machines (batteries and a suitable charger are included).

Condition: new, functionality: fully functional, machine/vehicle number: 1.161-070.0, working width: 510 mm, area performance: 2,805 m²/h, warranty duration: 24 months, water tank capacity: 70 l, noise level: 66 dB, battery capacity: 105 Ah, Technical specifications: Condition - NEW! Catalog number: 1.161-070.0 Drive type: Battery (not included in the set) Drive: Traction motor Brush working width (mm): 510 Vacuum working width (mm): 900 Fresh/dirty water tank capacity (l): 70 / 75 Theoretical area performance (m²/h): 2805 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 13 / 20 Water consumption (l/min): max. 2.3 Sound pressure level (dB(A)): 66 Gross weight (kg): 345 Weight without accessories (kg): 100 Dimensions (L × W × H) (mm): 1310 × 590 × 1060 Scope of delivery and equipment: The set includes NO batteries and NO charger Squeegee 900mm V-shaped with oil-resistant polyurethane rubbers Disc brush 510mm red - medium-hard Features: Powerful drive Automatic water stop Solenoid valve 2-tank system Fedpfx Afexnzuispefu The option of a machine ready to work with batteries and charger is available in our other listings. Advantages: - Self-explanatory symbols and a clear control panel. Short training phases. Easy handling thanks to a few yellow-coded controls. - Robust construction with integrated disc brush head. High area performance thanks to the large working width. Brushes are changed via pedal ejection. - Particularly maneuverable machine. Good overview of the surfaces to be cleaned. Easy transport. Key features: - Thanks to its slim and compact design, our battery-powered ride-on scrubber-dryer BD 50/70 R Bp Pack Classic with disc brush technology is extremely easy to maneuver and transport – even in elevators, for example. This positions the affordable entry-level model as a viable alternative to walk-behind scrubbers.

Condition: used, Year of construction: 2009, Palletiser Kolbus PL 771 Year: 2009 Description: - Automatic setting - Colour monitor with touch screen - Infeed conveyor - Turning device - Stacking robot Fedpfxexg Nzhs Afpjfu - Air table - Pallet dispenser - Slip sheet feeder - Pallet delivery station Technical specifications: - Infeed speed: up to 30 piles/min - Stack size max.: 563 x 406 x 350 mm - Stack size min.: 150 x 100 x 25 mm - Pallet size max.: 1.340 x 1.000 mm - Pallet size min.: 1.000 x 800 mm - Loading size min.: 900 x 700 mm - Palletizing height max.: 1.600 mm incl. pallet - Loading capacity max.: 1.500 kg/pallet

Condition: used, mileage: 6,66,437 km, power: 265 kW (360.30 HP), first registration: 05/2015, fuel type: diesel, number of seats: 39, gearing type: automatic, emission class: euro6, color: blue, Equipment: ABS, air conditioning, parking heater, General Engine: Mercedes-Benz AdBlue Emission standard: EURO 6 Total seats: 39 Seats: 36+2+1 (elevated/fixed) Standing places: 89 Transmission: Automatic Safety * ABS, ASR, EBS * Fog lights * Xenon headlights * Rearview camera Passenger compartment * Auxiliary heater * Air conditioning * Driver's microphone * Stroller parking space * Wheelchair ramp * Wheelchair space * Stop request button * Interior camera Exterior * Matrix/destination display Lawo * Number of double-width doors: 4 * Lift/lowering system * Power steering * Digital tachograph card * Sun visor * Electric exterior mirrors * Roof hatches * Roof fans * Roof ventilator Miscellaneous * Twin tires * Vehicle length: 17.95 m Ffsdpsyfkrtsfx Afpou * Vehicle width: 2.55 m * Vehicle height: 3.20 m * Tire condition: front approx. 80 % * Tire condition: middle approx. 40 % * Tire condition: rear approx. 40 % Our internal vehicle number: 12132 Subject to errors and changes. Images and text may differ from the actual vehicle. Over 300 vehicles constantly in stock.

Condition: used, mileage: 5,89,538 km, power: 265 kW (360.30 HP), first registration: 05/2015, fuel type: diesel, number of seats: 39, gearing type: automatic, emission class: euro6, color: blue, Equipment: ABS, air conditioning, parking heater, General Engine: Mercedes-Benz AdBlue Emission standard: EURO 6 Total seats: 39 Seating: 36+2+1 elevated/fixed Standing places: 89 Transmission: Automatic Safety * ABS, ASR, EBS * Fog lights * Xenon headlamps * Reversing camera Passenger compartment * Auxiliary heater * Air conditioning * Driver’s microphone * Space for pram * Wheelchair ramp * Wheelchair bay * Stop request button * Interior camera Exterior * Matrix/destination display Lawo * Number of double-width doors: 4 * Lifting/lowering system * Power steering * Tachograph card * Sun visor * Electric exterior mirrors * Roof hatches * Roof fans * Roof ventilators Other Ffodpfx Aoyfkqvofpou * Twin tires * Vehicle length: 17.95 m * Vehicle width: 2.55 m * Vehicle height: 3.20 m * Tyres: front approx. 80% * Tyres: middle approx. 40% * Tyres: rear approx. 40% Our internal vehicle number: 12087 Subject to error. Images and text may differ from the actual vehicle. Over 300 vehicles constantly available.

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 150 mm, side roll diameter: 130 mm, working width: 2,050 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic top roll opening head - Movable control panel - Centrally driven rolls powered by electric motor - Hydraulic up/down movement of rear and lower roll - Precision bending with main motor equipped with brake - Conical bending and pre-bending system - Upper and lower roll driven by planetary gearbox - Rear roll ball support system for easier plate handling - Compliance with EU safety directives Fodpfx Ajxw D Udsfpjfu - High-strength forged steel rolls made of SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 pcs) - Operating manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for support during large-diameter bending - Hydraulic side supports for large-diameter bending - Ground and polished rolls - Wire grooves on roll ends - NC control unit - Dual-speed operation - Stepless speed adjustment - Ejector system - Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Bending: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 300 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller length: 3,100 mm, sheet thickness (max.): 15 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload * All rolls driven by hydromotor and planetary gearbox * Hydraulically opening head for easy removal of bent parts * Very easy operation with mobile control panel Fodpfx Afew Sld Repefu * Lower rolls positions easily read via two digital indicators * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical bending system with bearings * Hydraulic balancing system for parallel movement of shafts * Extended shaft ends for fitting profile- and pipe-bending rolls OPTIONAL EQUIPMENT * Top crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Ground and polished rolls for special applications * Rollers for profile bending * Infinitely adjustable hydraulic speed control * Electronic balancing system for parallel shaft movement TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-Bending: 10/13 mm Bending: 13/15 mm Top & Bottom Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 5150 mm Width: 1500 mm Height: 1550 mm Weight: 9050 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 350 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller length: 3,100 mm, sheet thickness (max.): 20 mm, STANDARD EQUIPMENT * Lower, top and side rolls move up and down linearly via pistons hydraulically attached to the frame * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3-roll motor driven) * The position of the rolls can be easily read with three digital displays * Rolled parts are easily removed thanks to the hydraulically opening head and automatically lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC controls * Top crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 12/16 mm Bending: 16/20 mm Top & Lower Roll: 350 mm Side Roll: 260 mm Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Length: 5350 mm Fodpfxow Smdfe Afpofu Width: 1900 mm Height: 1950 mm Weight: 14,450 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 550 mm, roller (top) diameter: 550 mm, side roll diameter: 450 mm, roller length: 3,100 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, power: 70 kW (95.17 HP), warranty duration: 12 months, Equipment: emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT * The bottom and side rolls move up and down linearly via hydraulic pistons attached to the frame * Protected against overloading * The top and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) * Easy roll position reading via three digital indicators * Easy removal of bent parts thanks to hydraulically opening head and automatically lifting shaft * Very user-friendly operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system Fjdpfx Afsxbzptjpefu OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) for support when bending large diameters * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Polished and ground rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel roll movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,050 mm, sheet thickness (max.): 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulically adjustable rear and lower rolls Precision bending with braked main motor Conical bending and pre-bending system Lower and upper roll drive by planetary gearbox Rear roll ball support system to facilitate sheet movement Compliance with EU safety directives High-strength forged steel rolls made of SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operation manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for assistance in large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Ffodpfx Afsw Slctepeu Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending Capacity: 10/12 mm Upper & Lower Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 400 mm, roller (top) diameter: 400 mm, side roll diameter: 300 mm, roller length: 3,100 mm, sheet thickness (max.): 30 mm, STANDARD EQUIPMENT * The bottom, top, and side rolls move linearly up and down via hydraulic cylinders connected to the frame * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3-roll motor drive) * The positions of the rolls can be easily read via three digital displays * Thanks to a hydraulically opening head and an automatically lifting shaft, bent workpieces can be easily removed * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending device * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 – 320 – 350 – 380 – 400 – 460) * Electronic balancing system (Ø500 – 550 – 580 – 620 – 680) * Dual-speed working system Ffodpfx Afow Sl T Sspeu OPTIONAL EQUIPMENT * Automation via NC and CNC control * Top crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet extraction system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel roll movement (Ø280 – 320 – 350 – 380 – 400 – 460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 20/25 mm Bending Capacity: 25/30 mm Top & Bottom Roll: 400 mm Side Roll: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 20,200 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 460 mm, roller (top) diameter: 460 mm, side roll diameter: 380 mm, roller length: 4,100 mm, sheet thickness (max.): 25 mm, power: 38.5 kW (52.35 HP), STANDARD EQUIPMENT * The lower, upper, and side rolls move linearly up and down via hydraulic pistons attached to the frame * Protected against overload * Upper and side rolls driven by hydromotor and planetary gearbox (all three rolls are motor-driven) * The position of the rolls can be easily read via three digital displays * Thanks to the hydraulically opening head and automatically lifting shaft, the bent workpiece can be easily removed * Very easy operation with a movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operating system OPTIONAL EQUIPMENT * NC and CNC control automation * Overhead crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending Fodew Sl I Nepfx Afpsfu * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 4100 mm Pre-bending Thickness: 16/20 mm Bending Thickness: 20/25 mm Upper & Lower Roll Diameter: 460 mm Side Roll Diameter: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 6950 mm Width: 2300 mm Height: 2350 mm Weight: 29,500 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 350 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller length: 2,550 mm, sheet thickness (max.): 25 mm, STANDARD EQUIPMENT * Lower, upper, and side rolls are hydraulically actuated and move linearly up and down via body-mounted pistons * Protected against overload * Upper and side rolls are driven by hydromotors and planetary gearboxes (3-roller motor drive system) * Positions of the rolls can be easily read via three digital displays * The hydraulically opening head and automatically upward-moving shaft make it easy to remove the bent workpiece * Extremely easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone rolling system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) for support in large diameter rolling * Hydraulic side supports for large diameter rolling * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Rolling Length: 2550 mm Pre-bending: 16/20 mm Fedpfxow Smb Rs Afpsfu Bending: 20-25 mm Upper & Lower Roll: 350 mm Side Roll: 260 mm Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1900 mm Height: 1950 mm Weight: 12,800 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 1,550 mm, working width: 1,550 mm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, power: 7.5 kW (10.20 HP), warranty duration: 12 months, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overloading * All rolls are driven by hydromotors and planetary gearboxes Fjdpfxexbzr Uj Afpjfu * Easily removable bent parts thanks to a hydraulically opening top roll * Very easy operation with movable control panel * Lower roll positions are easily read via two digital displays * Welded steel frame construction * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical rolling system with roller bearings * Hydraulic synchronisation system for parallel movement of shafts * Extended shaft ends to allow mounting profile and pipe bending rolls OPTIONAL EQUIPMENT * Top crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Specially ground and polished rolls for custom work * Bending rolls for profiles * Infinitely variable hydraulic speed adjustment * Electronic synchronisation system for parallel movement of shafts TECHNICAL SPECIFICATIONS Bending Length: 1550 mm Pre-bending: 10/12 mm Bending: 12/15 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Motor Power: 7.5 kW Bending Speed: 5 m/min Length: 3500 mm Width: 1200 mm Height: 1370 mm Weight: 3600 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,550 mm, sheet thickness (max.): 10 mm, STANDARD EQUIPMENT - Steel construction main frame - Hydraulic top roll opening head - Movable control panel - Motor-driven central rolls - Hydraulic up-down movement for rear and lower rolls - Precision bending with braked main motor - Cone bending and pre-bending system - Lower and upper rolls driven by planetary gearbox - Rear roll ball system facilitating sheet movement - Compliance with EU safety directives - High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 units) - User manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for supporting large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at roll ends - NC control unit - Dual speed operation - Infinitely variable speed adjustment - Ejector system - Hydro-motor option TECHNICAL SPECIFICATIONS Bending length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4500 mm Fodpfx Afow Slcgepjfu Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Condition: new, Year of construction: 2025, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 320 mm, roller (top) diameter: 320 mm, side roll diameter: 240 mm, working width: 2,050 mm, sheet thickness (max.): 25 mm, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, STANDARD EQUIPMENT * The lower, top, and side rolls move linearly up and down via hydraulic pistons fixed to the frame Fjdpfx Afjxw Eblopefu * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3-roll motor driven) * Roll positions are easily readable via three digital indicators * Easy removal of the bent workpiece thanks to the hydraulically opening head and the automatically ascending shaft * User-friendly operation with a movable control panel * Welded steel construction frame * SAE 1050 (CK 50) forged or rolled steel shafts, induction-hardened * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Infinitely variable speed control system * Electronic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 2050 mm Pre-bending : 16 / 20 mm Bending : 20 / 25 mm Top & Bottom Roll : 320 mm Side Roll : 240 mm Motor Power : 20 kW Bending Speed : 1.5 - 5 m/min Length : 4350 mm Width : 1800 mm Height : 1950 mm Weight : 10,500 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 460 mm, roller (top) diameter: 460 mm, side roll diameter: 380 mm, working width: 2,050 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, power: 38.5 kW (52.35 HP), warranty duration: 12 months, STANDARD EQUIPMENT * The lower, upper and side rolls move up and down linearly via hydraulic cylinders attached to the body * Protected against overload * The upper roll and side rolls are driven by hydromotor and planetary gearbox (all 3 rolls are motor driven) * Three digital displays allow easy reading of roll positions * Hydraulic opening head and automatic lifting shaft enable easy removal of the bent workpiece * Easy operation with mobile control panel * Welded steel construction body * SAE 1050 (CK 50) induction hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic synchronization system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) * Electronic synchronization system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Top crane (elevator) for support in large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic synchronization system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Ffsdsxd S T Uopfx Afpsu Pre-bending: 35 / 40 mm Bending: 40 / 50 mm Upper & Lower Roll Diameter: 460 mm Side Roll Diameter: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 2300 mm Height: 2350 mm Weight: 19,800 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 300 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller length: 2,550 mm, sheet thickness (max.): 18 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Equipped with overload protection * All rolls are driven by hydromotors and planetary gearboxes * Hydraulic opening head allows easy removal of curved parts * Very easy operation with movable control panel * Lower roll positions can be easily read using two digital displays * Welded steel construction frame * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Bearing-mounted conical bending system * Hydraulic balancing system provides parallel movement of shafts * Extended shaft ends to allow mounting of profile and pipe bending rolls OPTIONAL EQUIPMENT * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Ground and polished rolls for special operations * Rolls for profile bending * Stepless hydraulic speed adjustment * Electronic balancing system for parallel shaft movement TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 12/16 mm Bending: 16/18 mm Upper & Lower Rolls: 300 mm Side Rolls: 280 mm Motor Power: 11 kW Fodpsw Slf Uefx Afpsfu Bending Speed: 5 m/min Length: 4600 mm Width: 1500 mm Height: 1550 mm Weight: 8400 kg

Condition: new, Year of construction: 2025, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 380 mm, roller (top) diameter: 380 mm, side roll diameter: 300 mm, working width: 3,100 mm, sheet thickness (max.): 25 mm, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT * The lower, upper and side rolls move up and down linearly, operated by hydraulic pistons connected to the frame * Protected against overloading * Upper and side rolls are driven by hydromotors and planetary gearboxes (all three rolls are motor-driven) * The positions of the rolls can be easily read via three digital displays * Rolled parts can be easily removed with hydraulically opening head and automatic lifting shaft Ffedoxw Ecvepfx Afpeu * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) to support large-diameter bending * Hydraulic side supports to assist with large-diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending Capacity : 16/20 mm Bending Capacity : 20/25 mm Top & Bottom Roll Diameter : 380 mm Side Roll Diameter : 300 mm Motor Power : 31.5 kW Bending Speed : 1.5 - 5 m/min Length : 5850 mm Width : 2250 mm Height : 2350 mm Weight : 19,200 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 3,100 mm, sheet thickness (max.): 9 mm, overall weight: 5,400 kg, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Motor-driven central rolls Hydraulic up/down movement for rear and bottom rolls Precision bending with braked main motor Cone bending and pre-bending system Upper and bottom rolls driven by planetary gearbox Rear roll ball support system for easier sheet movement Compliance with EU safety directives High-strength, forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operator's manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for support in large diameter bending Ground and polished rolls Wire grooves on roll ends NC control unit Dual-speed operation Infinitely variable speed adjustment Ejector system Hydraulic motor option TECHNICAL DATA Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 L Length: 5000 mm Width: 1200 mm Height: 1370 mm Ffjdpfx Afew Slbvepou Weight: 5400 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 3,100 mm, sheet thickness (max.): 9 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium sheet metal, aluminum, or stainless steel materials Highly suitable for bending materials into round and various diameters Lower and side rolls move up and down hydraulically via direct linear motion Protected against overload Upper roll driven by electric motor and planetary gearbox. Lower roll driven by cardan coupling system. Both rolls are driven Positions of the rolls easily readable via three digital displays Bent workpiece can be easily removed thanks to the hydraulic opening head Very easy operation with mobile control panel Welded steel construction body SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Cone bending system Hydraulic balancing system for parallel movement of the rolls Conforms to EU safety standards and bears the CE mark User manual OPTIONAL EQUIPMENT Remote assistance with NC control Overhead crane (elevator) support for large-diameter bending Hydraulic side supports for large-diameter bending Ground and polished rolls Ffjdpfx Afew Slkkspsu Dual-speed adjustment system Infinitely variable speed adjustment Rotation driven by hydromotor Extractor system TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-Bending: 5/7 mm Bending: 7/9 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 6800 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 380 mm, roller (top) diameter: 380 mm, side roll diameter: 300 mm, roller length: 4,100 mm, sheet thickness (max.): 16 mm, STANDARD EQUIPMENT * Lower and side rolls are connected to the body by hydraulic pistons and perform vertical linear movement * Protected against overload * Top and side rolls are driven by hydromotors and planetary gearboxes (3 roll motor drive) * Roll positions are easily read via three digital indicators * Hydraulic opening head and automatic upper shaft lift allow easy removal of rolled parts * Easy operation using a movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operating system Fjdpfx Afjw Smc Iepjfu OPTIONAL EQUIPMENT * Automation via NC and CNC control * Overhead crane (elevator) to support large diameter bending * Hydraulic side supports to assist with large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 4100 mm Pre-bending : 10/12 mm Bending : 12/16 mm Top & Bottom Roll Diameter : 380 mm Side Roll Diameter : 300 mm Motor Power : 31.5 kW Bending Speed : 1.5 - 5 m/min Length : 6950 mm Width : 2250 mm Height : 2350 mm Weight : 22000 kg

Condition: new, Year of construction: 2025, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 400 mm, roller (top) diameter: 400 mm, side roll diameter: 300 mm, working width: 2,550 mm, sheet thickness (max.): 40 mm, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, STANDARD EQUIPMENT * Upper, lower, and side rolls are linearly moved up and down by hydraulically actuated pistons attached to the frame * Protected against overload * Upper roll and side rolls are driven by hydromotors and planetary reducers (3 roll motor drive) Fodpfjxw Ebxjx Afpefu * The position of the rolls can be easily read with three digital indicators * The hydraulically opening head and the automatically lifting shaft allow the bent part to be removed easily * Very easy operation with movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) to support large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280-320-350-380-400-460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 25/30 mm Bending: 30/40 mm Upper & Lower Roll Diameter: 400 mm Side Roll Diameter: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 5350 mm Width: 2250 mm Height: 2350 mm Weight: 17,800 kg

Condition: excellent (used), Technical data: Max planing width: 210 mm Max planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 4 Spindle arrangement: bottom right left top Each spindle powered by a separate motor Toothed feed roller in the table before the first head Number of upper steel feed rollers: 6 Number of upper rubber feed rollers: 1 Extraction port diameter: 4x130 mm Fsdpfx Afewv Sxkjpjfu Continuously variable feed speed Feed drive via cardan shafts Lubrication pump for worktable 1 smooth roller in the table Pressure: 6 atm Electric elevation of machine body Power supply: 400 V Total power: 23 kW Overall dimensions: Length: 3580 mm Width: 1700 mm Height: 1800 mm

Condition: used, functionality: fully functional, Year of construction: 2025, CORMAK Electric Scissor Lift is a professional, mobile, self-propelled access platform designed for intensive work at height, both in industrial halls and outdoor environments. Thanks to its robust scissor construction, high stability, and advanced technical functionality, this model ensures safe lifting of operators and tools to a working height of up to 14 meters. It is an indispensable solution for industrial plants, construction companies, logistics centers, and service facilities where precision, safety, and efficiency in working at height are essential. Key Advantages Working height up to 14 m – enables installation and maintenance tasks at significant heights. Scissor lifting system – provides smooth, stable, and even platform movement, even at maximum load. Load capacity up to 320 kg – allows two operators to work simultaneously with tools. Extendable platform (0.9 m) – ensures access to hard-to-reach areas without repositioning the lift. Electric drive with 24V batteries – guarantees quiet, emission-free operation indoors and long operating time without recharging. Driveable at full height – a key feature for tasks requiring mobility while elevated. 230V / 400V power supply on the platform – enables direct connection of tools without additional extension cords. Standard Equipment Lower and platform-mounted control panels Extendable working platform Safety guardrails with access gate 230V / 400V power supply on the platform Non-marking tires Overload protection system and tilt sensors Emergency platform lowering system Built-in battery charger Technical Specifications Max. working height: 14 m Max. platform height: 12 m Max. stowed height (guardrails up / down): 2.59 / 2.05 m Platform dimensions: 2.27 × 1.12 m Platform extension length: 0.9 m Load capacity / Extended platform load: 320 kg / 113 kg Maximum number of occupants: 2 Maximum allowable wind speed: 12.5 m/s Wheelbase: 1.87 m Turning radius: 2.1 m Ground clearance: 90 mm Ground clearance with lowered supports: 19 mm Power supply: 24 V (4 × 12 V, 300 Ah) Max. operating pressure: 240 bar Tire size: Ø 381 × 127 mm Max. gradeability (platform lowered): 25% Max. tilt: X – 1.5° / Y – 3° Travel speed (platform lowered): 3.5 km/h Ffodpfsygthgjx Afpju Travel speed (platform raised): 0.8 km/h Weight: 2883 kg WARNING! SLIGHTLY USED PRODUCT. NO WARRANTY PROVIDED.