Used Rotating Harrows for sale (7,985)

Year of construction: 2014, condition: ready for operation (used), A welding turning device Jucat consisting of two parts with the workpiece in the middle is available. Design: 2-column system, max. load capacity: 6000kg, rotational torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible. Iijdpfx Aoyrg Hyjhnsg

Condition: refurbished (used), Year of construction: 2003, operating hours: 15,000 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 534 mm, feed length X-axis: 762 mm, feed length Y-axis: 305 mm, feed length Z-axis: 534 mm, torque: 45 Nm, controller manufacturer: Haas, total height: 2,700 mm, total length: 2,200 mm, total width: 1,750 mm, table width: 267 mm, table length: 1,213 mm, rotational speed (max.): 6,000 rpm, overall weight: 1,315 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, spindle nose: CT40/ISO/BT40, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Three-axis vertical CNC milling machine Haas TM-1HE, numerically controlled, with a 6000 rpm spindle. The machine is being sold by Haas service technicians with 10 years of experience. The machining center has undergone a complete, comprehensive inspection; it has been refurbished and is ready for operation. The mill is equipped with a range of additional options: - Higher-speed spindle up to 6000 rpm - Rigid tapping - Rotation & scaling - M19 spindle orientation - Macro programming - HSM (High Speed Machining) - IPS (Intuitive Programming System) - Possibility to activate 4th axis after adding servo amplifier and wiring; can be sold separately (fourth axis option) - Air coolant system Machine Information: - Machine type: Three-axis vertical milling machine Haas TM-1 - Serial number: 33515 - Manufacturing date: 12/03 - Spindle speed: 6000 rpm - X-axis travel: 762 mm - Y-axis travel: 305 mm - Z-axis travel: 534 mm - Minimum spindle-to-table distance: 102 mm - Maximum spindle-to-table distance: 636 mm Iedpfx Ajyanlajhnjig - Table size: 1213 × 267 mm - T-slots: 3 slots, 16 mm wide - Overall dimensions (W × D × H): 220 × 175 × 270 cm - Weight: 1315 kg - Spindle motor power: 5.6 kW - Maximum torque: 45 Nm - Spindle taper: CT40 / ISO / BT40 - Voltage: 366/425 V - Phase: 3 - Full load current: 13 A - Frequency: 50/60 Hz - Largest load current: 16 A The machine has undergone a full, comprehensive inspection. All of the following components have been checked and verified: - Ballscrews - Linear guides and ways - Lubrication system - Spindle assembly - Spindle motor - Encoder - Vector drive - Servo amplifiers - I/O board - Processor board - All electrical cabinet components - Axis drives - Tool change system - CNC controller - Additional subsystems and components The machine is fully refurbished and ready for immediate operation.

Year of construction: 2025, operating hours: 300 h, condition: like new (used), Equipment: CE marking, TECHNICAL DETAILS: Drive Unit: Model: VM800T. Maximum load capacity: 400 t. Turning capacity: 800 t. Maximum speed: 108 cm/min. Iisdpfx Ahsy Ex D Sjnog Minimum speed: 20 cm/min. Maximum diameter: 8,000 mm. Minimum diameter: 2,500 mm. Length: 6,360 mm. Width: 1,544 mm. Height: 1,565 mm. Weight: 15,300 kg. Diameter range: As per drawing, 2,500 ÷ 8,000 between 61º and 54º. Wheels: Steel, Ø 950 x 350 mm. Power: 2 motors of 7.5 kW with primary epicyclic gearboxes and secondary worm gearbox. Idler Unit: Model: VC800T. Maximum load capacity: 400 t. Maximum diameter: 8,000 mm. Minimum diameter: 2,500 mm. Length: 5,852 mm. Width: 1,500 mm. Height: 1,565 mm. Weight: 12,720 kg. Diameter range: As per drawing, 2,500 ÷ 8,000 between 61º and 54º. Wheels: Steel, Ø 950 x 350 mm.

Condition: used, Year of construction: 2023, load capacity: 6,000 kg, lifting height: 29,900 mm, fork length: 1,200 mm, total length: 9,140 mm, · Max. Tragkraft 6000 kg · Max.Hubhöhe 29.90 m · Maximale seitliche Reichweite 25.90 m · Kippwinkel 12 ° · Schüttwinkel 110 ° · Turret rotation (Max.) 360 ° · Antriebsräder (vorne / hinten) 2 / 2 · Lenkart 2-rad Lenkung, 4-rad Lenkung, Krebsgang · Stützentyp Zweifach-Teleskop · Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig · Hersteller Yanmar · Motornorm Stage V / Stufe 4 · Motor Modell 4TN107FTT-6SMU1 · Nennleistung Verbrennungsmotor / Leistung (kW) 173 Hp / 127 kW · Max. Drehmoment / Engine rotation (min) 805 Nm @ 1500 rpm · Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ · Anzahl Batterien / Batterie 2 x 12 V · 12V Battery capacity 120 Ah · Battery starting current (EN)850 A · Getriebetyp Hydrostatic with Speedshift · Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift / 2 / 2 · Max. travel speed 40 km/h · Zugkraft 9200 daN · Parkbremse Automatische negative Parkbremse · Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen · Steigfähigkeit - beladen / unbeladen 32.40 % / 41.40 % · Pumpenart Verstellpumpe · Hydraulikfördermenge 185 l/min · Hydraulikdruck 350 bar · Motoröl 13 l · Hydrauliköl 300 l · Fassungsvermögen des Kraftstofftanks 320 l · Abgasnachbehandlung für Diesel (AdBlue®) 24 l · Geräuschpegel im Fahrerstand (LpA) 67 dB · Außenschallpegel (LwA) 108 dB · Vibrationswert an Händen/Armen < 2.50 m/s² · Lenkräder (vorne / hinten) 2 / 2 Isdpfxozb Rl Es Ahneig · Steuerungen 2 Joysticks · Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 · Anbaugeräte Erkennungssystem (E-Reco) Standard

Condition: excellent (used), Year of construction: 2017, operating hours: 8,500 h, functionality: fully functional, Available in Q1/2027, equipment can still be adapted to meet specific needs. Universal 5-axis retrofitting grinding machine directly from the manufacturer. Equipped with the latest Horizon grinding software, tailored to the requirements of the tools and components. For re-sharpening hammer jaws, helical milling cutters, bevel gear cutters, cutting rotors, form cutters, industrial knives, circular knives, spur gears, skiving tools, deep-hole drills, and other workpieces/components. Working area: X-axis: 630 mm Y-axis: 345 mm Iedpfsyzqwcex Ahnsig Z-axis: 430 mm C-axis: Rotation angle 300° X3 auxiliary axis: Working area: 400 mm Grinding spindle: Interface: HSK80 (conversion to HSK50 possible) Power: 100% 28.8 kW Speed: Standard 12,000 rpm Measuring system and feed: Resolution of linear axes: 0.0001 mm Rapid traverse of linear axes: 30,000 mm/min Resolution of rotary axes: 0.001° Speed of C-axis: 150 rpm Rotary axis: (A-axis SK50) Center height: Standard 175 mm Speed as spindle: 1,000 rpm Optional: 2,600 rpm Control system: Siemens 840D SolutionLine Tool changer: Single-wheel, 6-8 positions Coolant system: Turbo Separator Extraction system: LTA Fire extinguishing system: Kraft & Bauer Dressing unit Tailstock: optional Further accessories/clamping devices available from the extensive A. Haas clamping device catalog. Individual, customer-specific training programs. Includes pre-acceptance at the manufacturer's plant, IBN (installation, briefing, and training), and final acceptance at the customer's site. Financing options available upon request.

Condition: used, Year of construction: 2026, functionality: fully functional, load capacity: 1,500 kg, construction width: 1,200 mm, Rotating device Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Technical condition: New Description: Rotating device, 205 degrees, for complete emptying of all containers, load capacity 1500 kg, support arm permanently mounted/foldable, incl. hoses & quick couplings, available from stock. Iijdpfx Aezhp Dfehneg

Condition: used, Year of construction: 2023, load capacity: 6,000 kg, lifting height: 20,800 mm, fork length: 1,200 mm, total length: 7,760 mm, - Drehbarer Teleskopstapler RTH 6.21 - Maximale Tragkraft 6.000 kg (Schwerpunkt 600 mm) - Maximale Hubhöhe 20,80 m - Drehung 360° (durchgehend) - Nennleistung 100 kW (136 PS) bei 2.200 U/min - Max. Drehmoment 500 Nm bei 1.600 U/min - Hubraum 3,6 l - Zylinderzahl 4 in Reihe - Motorkonfiguration Dieselmotor mit Direkteinspritzung und Turboaufladung - Kühlanlage Wassergekühlter Ladeluftkühler - Antrieb Typ Hydrostatisch - Modell Danfoss / Rexroth - Max. Druck 480 bar - Fördervolumina Elektronisch geregelte Axialkolbenpumpe. Verstellmotor. Isdpfx Ajy Hmg Dohneig - Getriebe Dropbox-Getriebe mit 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt - Achsen und Bremsen: Typ Achsen mit Planeten-Endantriebe - Hinterachse Lenkende Pendelachse mit hydraulischer Sperre - Vorderachse Pendellenkachse mit Niveauausgleich +/- 8 Grad - Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätig - Feststellbremse Negativbremse, hydraulisch betätigt - Reifengröße 445/65 R22,5 - Leistungen: Max. Fahrgeschwindigkeit 40 km/h - Max. Zugkraft am Lasthaken 72 kN - Steigfähigkeit 41% - Wenderadius (mit Gabelzinken) 5.900 mm - Gesamtgewicht, unbeladen 17.600 kg - Auf Vorderachse, unbeladen (Ausleger eingefahren und abgesenkt) 8.000 kg - Auf Hinterachse, unbeladen (Ausleger eingefahren und abgesenkt) 9.600 kg - Max. Betriebsdruck 350 bar - Anlagentyp Load sensing - Betriebspumpe Danfoss / Casappa Verstellpump - Verteiler für Ausleger- und Oberwagenbewegungen: Danfoss- Elektroproportionalventil SIL - Verteiler für Stützen Bosch Rexroth Elektrohydraulische Aktuatoren - Bewegungssteuerung Zwei 2-Achsen-Joysticks Danfoss mit Totmanneinrichtung Steuerung mit CAN-Bus-Technologie

Condition: excellent (used), Year of construction: 2018, operating hours: 9,219 h, functionality: fully functional, machine/vehicle number: 2730218, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 1,500 mm, controller manufacturer: Heidenhaim, controller model: HAIDENAIN TNC 530 HSC, total height: 4,070 mm, total length: 6,800 mm, total width: 6,500 mm, table width: 1,300 mm, table length: 1,800 mm, table load: 6,000 kg, overall weight: 19,000 kg, spindle speed (max.): 3,500 rpm, operating hours of spindle: 9,219 h, number of slots in tool magazine: 32, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, MACHINE FEATURES Model: RTX 25 TG130 Serial Number: 2730218 RTX Series Features Structure: Fixed bed and moving column. Movements: Longitudinal table and transverse column with constant support. Rotary Table: Replaces the fixed rectangular version for continuous machining operations. Head: Bi-rotational head as standard for maximum flexibility. Type: Universal milling machine with fixed bed. Applications: Precision mechanical machining and complex profiles. Construction: Designed and assembled in Turin by Goglio Milling Systems. Travels Longitudinal Travel (X-axis) 2500 RCV UL1007 Transverse Travel (Y-axis) 1700 RCV UL1007 Vertical Travel (Z-axis) 1500 RCV UL0714 Rotary Table TG-130_1300x1800 Iijdpfx Ahoyn Rduensg Spindle Motor Power 24 kW Maximum Spindle Speed 3500 rpm Rapid Traverse Rate X-axis (CNC) 15,000 mm/min Rapid Traverse Rate Y-Z axis (CNC) 15,000 mm/min Rapid Traverse Rate Axes (Manual) 6,000 mm/min Working Feed Rate (CNC) 10,000 mm/min Working Feed Rate (Manual) 2,500 mm/min Continuous Torque Motors X-Y Axis 36 Nm Continuous Torque Motors Z Axis 36 Nm Tool Holder Electro-hydraulic Spindle Taper ISO 50, Tool Drawbar BIR 200 Maximum Permissible Load on the Table 6,000 kg Bi-rotational Head Continuous for B-axis 0 - 360° Module Rotary Table Coupled to Hydraulic Rotating C-axis 0 - 360° continuous Machine Chiller Yes Tool Magazine 32 Positions Operating Temperature 10-40 degrees C Base Machine Mass 19000 Kg CNC HEIDENHAIN TNC 530 HSCI

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Column drill press MK 4 IBARMIA AZ 34 CE Infinitely variable speed from 50 - 2000 rpm Iisdpfsz A Tu Usx Ahnsg 3-stage feed Threading device Coolant system Drive: 2.3 kW Overhang: 300 mm Drilling stroke: 150 mm Quick-change drill chuck Röhm, drill vise 120 mm Table: 480 x 400 mm, rotatable Condition: almost new Dimensions: H 1.92 m, D 0.85 m, W 0.42 m Weight approx. 400 kg Can be inspected while powered on Free loading at D - 88433 Schemmerhofen

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, planing width: 500 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,700 rpm, total length of planing tables: 800 mm, total width: 920 mm, total height: 1,140 mm, overall weight: 450 kg, VEBA S500 PLANER | 500 MM | 4 KNIVES | 4.3 kW | 2009 | ITALY | Professional VEBA S500 planer/thicknesser from the renowned Italian company VEBA Meccanica S.r.l. This machine is designed for the precise planing of wooden components to a specific thickness. Its robust, compact design and 4-knife cutterblock make it ideal for use in both carpentry workshops and for the production of solid wood components. Made in Italy, this machine is used and ready for operation. KEY FEATURES: - Renowned Italian brand VEBA - Model S500 - Planing width of 500 mm - 4-knife cutterblock - Traditional knives - Robust construction - 2 feed speeds - Material height range up to approx. 240 mm - Maximum planing depth of 8 mm - Table height adjustment - 2 rollers in the table to facilitate material feed - Machine equipped with CE marking - Year of manufacture 2009 TECHNICAL DATA: - Planing width: 500 mm - Work table dimensions: approx. 500 × 800 mm - Material height range: approx. 4–240 mm - Maximum planing depth: 8 mm - Planing cutterblock: Ø 110 mm - Number of knives: 4 pcs - Type of knives: traditional - Cutterblock rotational speed: approx. 4700 rpm - Feed speed: 6.5 / 13 m/min - Table rollers: 2 pcs - Height adjustment: electric and mechanical MOTOR / POWER SUPPLY: Motor power: 4.3 kW Voltage: 400 V Power supply: 3 phases DIMENSIONS AND WEIGHT: Machine dimensions: approx. 1000 × 920 × 1140 mm Weight: 450 kg – according to the nameplate We invite you to test the machine on-site. Financing options available through leasing or installment plans. WE ORGANIZE TRANSPORT. Iisdpfx Ahez A A Iweneg

Condition: not inspected (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 4619, Gubisch UFA with 4 spindles, 1st spindle: synchronized rotation 2nd spindle: counter-rotation 3rd spindle: counter-rotation 4th spindle: counter-rotation Working height 115 mm, Spindle speed 6,000 rpm, Spindle diameter: 1 x 30 mm and 3 x 40 mm, Largest working diameter D = 220 mm, Smallest working diameter 100 mm, Total power consumption 19 kW, 380 V, 50 Hz, Weight approx. 1,850 kg, in “as is” condition, as inspected, available from the Seevetal warehouse, Ex works, excluding transport, subject to prior sale. Iiodsznkyuopfx Ahneg

Condition: excellent (used), Year of construction: 2010, operating hours: 18,502 h, functionality: fully functional, machine/vehicle number: 3201379, type of input current: AC, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, overall weight: 40,000 kg, total length: 2,550 mm, total height: 1,090 mm, total width: 1,500 mm, Our Salvagnini P4X-2516 Panel Bender is a fully automatic, high-performance panel bending system designed to streamline sheet metal production with maximum efficiency and precision. It integrates automated loading, feeding, bending, and unloading into a single continuous process, minimizing manual handling and ensuring consistent output quality. The machine features adaptive bending technology with real-time sheet thickness measurement, allowing automatic adjustment of bending parameters for optimal accuracy. Equipped with an advanced SiX control system and intelligent software, it enables flexible production scheduling and program management. The inclusion of an automatic blankholder (ABA) and auxiliary bending tools (CLA) allows complex and multi-stage bending operations without manual setup, while the rotating manipulator enables multi-side bending in a single cycle. Max. sheet length: 3,048 mm Max. sheet width: 1,524 mm Max. bending length: 2,500 mm Sheet thickness (steel ~410 MPa): 2.5 mm (90°) Sheet thickness (stainless steel ~580 MPa): 2.1 mm (90°) Sheet thickness (aluminium ~265 MPa): 3.2 mm (90°) Max. bending angle: +135° / -135° Max. flange height: 165 mm Max. diagonal (rotatable sheet): 2,800 mm Min. sheet thickness: 0.5 mm Max. pack height (incl. pallet): 350 mm Max. load capacity: 5,000 kg Vertical stroke (loading table): 550 mm Rotation capability: 0°, 90°, 180°, 270° Automatic loading system with scissor lift table () Conveyor–destacker (PCD3015) for automatic feeding Automatic panel bending center P4X-2516 Upper bending blade (LS1) Iisdjyr Ackopfx Ahnsg Lower bending blade (LI) SiX CNC control system SOLE.P4 production management software OFFICE.P4 offline programming software ABA automatic blankholder (automatic length adjustment) CLA-A asymmetric auxiliary bending system UC1000-G13 gooseneck tool set Eroded clamp (for coated / special materials) PSE automatic cleaning & lubrication system SAP panel unloader / accumulator Spare parts kit (approx. €7,000 value)

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, nominal power: 9 kW (12.24 HP), overall weight: 2,100 kg, type of input current: three-phase, The Crossline 650 automatic cut-off saw is equipped with a rotating table and a 650 mm diameter saw blade that can rotate +/-70°. Material inserted into the machine is automatically detected, and its length is determined. The material is then fed using a push-type clamping device. Cutting accuracy is ensured by two independent upper and side clamping devices. Once the material is firmly clamped, the saw blade rises for cutting. After cutting, the material is pushed onto the output table. The machine can operate in manual mode or automatically, connected to the WinCreator software or with data from other commonly used programs. Crossline 650M The Crossline 650M is equipped with a grooving module. Its use is intended for situations where the production of trusses needs to be combined with cutting material for wall panels, ensuring precise positioning of studs and components in the structure. Iijdpfjzz A Iwjx Ahnsg Thanks to its functionality, the Crossline 650M is an efficient, comprehensive solution and is often an alternative to complex machining centers in the prefabrication of wood-based panels. Groove width max. 60 mm (depending on the tool). Technical data for Crossline 650 and 650M: Industrial PC Beckhoff with 12" touch screen Saw blade Ø 650 mm, 2800 rpm, motor 7.5 kW Blade stroke adjustment Cutting accuracy ± 0.5 mm/meter Feed rate 0-60 m/min Automatic material measurement Cutting diagram for Crossline 650, 650M

Condition: good (used), Year of construction: 2019, functionality: fully functional, New price including transport and installation approx. €850,000 net. The machine was professionally disassembled by qualified technicians and subsequently stored. An inspection at the location in the Netherlands is possible after prior appointment. Technical data: Manufacturer: SCM Stefani Type: One 108 Cell Year of construction: 2019 Operating hours: approx. 5,600 Feed speed: 10–40 m/min Maximum speed with pickback: 30 m/min Workpiece length: approx. 250–3,000 mm Workpiece width: approx. 130–1,200 mm Workpiece thickness: 10–60 mm Maximum workpiece weight pickback: 80 kg Machine length edge banding machine: approx. 11,550 mm Installation area of the complete cell according to layout: approx. 30,270 × 13,166 mm Working height: approx. 970 mm Connection: 400 V / 50 Hz with neutral conductor Workpiece feed: Motorized feed roller table Easy Order BN+ automatic workpiece feed Automatic alignment for longitudinal and transverse processing Servo-controlled workpiece centering Automatic adjustment to different workpiece dimensions Isdoz Aquhopfx Ahnjig Large lateral workpiece support Edge and glue system: Nordson AltaPUR 4HO PUR hot melt unit Melt-on-demand technology Melting capacity up to approx. 6 kg/h SGP glue reservoir with CNC-controlled glue metering Additional interchangeable SGP glue reservoir Separate preheating trolley for one glue reservoir Workpiece edge preheating Automatic positioning of the edge guide and pressure rollers 12-position vertical edge magazine with automatic edge changing Processing of roll material up to 3 mm Designed for thin edge, 20° bevel, and radii R1, R1.5 and R2 Machining units: Pre-milling unit RT-H/RT-X with 2 × 4 kW Electronic positioning of the pre-milling unit Trimming unit YU/SP-1000 with automatic saw blade inclination Flush-cutting and pre-milling unit R-E CNC-controlled RSU-E Hi-Drive Multiedge fine milling unit Processing of thin edge and R1, R1.5 and R2 Round 4 four-motor corner rounding unit Automatic selection of four profiles MX80 HSK milling unit with 10 kW CNC-controlled horizontal and vertical positioning Automatic pivoting from 0–90° Suitable for continuous or recessed grooves on the top, bottom and workpiece edge CNC-controlled RCS-E Multiedge radius drawing blade unit Edge sanding unit GT with oscillating sanding belt Two glue seam drawing blade units RCA/2C Polishing unit SP/F with oscillating Riepe polishing pads Spraying devices: Release agent spraying device at the machine infeed Antistatic and coolant spraying device Spraying device for sensitive or foiled edges Cleaning agent spraying devices for the glue seam drawing blades Spraying device for the first pressure roller Automatic pickback return: Gantry return system with three servo-controlled axes Workpiece pick-up via vacuum gripper Automatic rotation by 0°, 90°, -90° and 180° Automatic return to the machine infeed Up to 10 return cycles per minute without rotation Up to 9 return cycles per minute with 90° rotation Motorized conveyor belts Additional second unloading station Central control via the machine control system Location: Netherlands Inspection: possible after prior appointment Condition: professionally disassembled and stored Availability: short notice Price: on request The technical data were compiled based on the available original documents. Errors, changes and prior sale are reserved.

Condition: used, 4-beam Double-acting hydraulic folding Tubular bar roller Tine harrow / goose foot coulters attached (reversible coulter) / Ijdpfx Aoual Tfjhnsig

Condition: used, functionality: unexamined, Year of construction: 2012, Rotating Device Stabau S 08 - DE 80 - S - G Ijdpfoy Av Ntjx Ahnjig Year of manufacture: 2012 Was mounted on an 8-ton forklift.

Condition: good (used), Year of construction: 1980, Offer 24518 Technical data: Iisdpfx Aevtnyyehnsg - Load capacity 150 kg - Cross supports + mounting bolts - Height of mounting bolt in horizontal position 1350 mm - Diameter of mounting bolt 55 mm - Rotation continuously adjustable - Right-hand and left-hand rotation - Drive 400 V / 3.0 kW - Height of mounting bolt in horizontal position 1350 mm - Space requirement approx. W 600 x D 1200 x H 1350 mm - Weight approx. 150 kg .

Condition: used, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 31,000 mm, total length: 9,150 mm, Rotating forklift Magni RTH 6.31 Drive Diesel Year built 2026 Lifting height (mm) 31,000 Lifting weight (kg) 6,000 Ijdpfx Aozz Tixohneig

Condition: used, Year of construction: 2011, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 400 mm, cutting width (max.): 850 mm, control type: CNC control, pivoting range: 75 °, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, total height: 3,200 mm, total length: 5,100 mm, total width: 3,300 mm, overall weight: 9,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, 1 Mono-spindle drilling machine HDM + HBP band sawing machine Type: HDM 910 HBP 430/854 G (drilling and sawing line for steel construction) Manufacturer: Vernet - Behringer Drilling machine: - Dimensions of working unit: H=3200 L=5100 W=1800 - Weight: approx. 6 tons - Drilling power: 11.7 kW - Rotating speed: 200 to 4000 RPM - Cooling: external lubrication or by centre-cooled drills Sawing machine: - Machine size: Length=1850mm swivel range 3500mm Width=3300mm swivel range 3500mm Height=2600mm - Saw band size: 6.700 x 41 x 1.3mm Iodpfxozytmzo Ahnjig - Weight: approx. 3 tons - Electric equipment: 400V / 50Hz - Power of motor: 7.5 kW, frequency regulated - Cutting speed: 17-110 m/min Technical capacities: more information can be found in the documentation - Max length of bars: 18m - Max weight of bars: 5 tons Sawing capacities: more information can be found in the documentation Tool clamp: ISO 40 Tool holders: 2x 5 pockets The industrial PC and the business software were updated in April 2025 (retrofit). The installation has been serviced annually.

Condition: excellent (used), Catalog number: 8110 TECHNICAL DATA - max. blade diameter: 350mm - spindle diameter: 30mm - blade adjustable up/down - spindle lock - blade guard - max. cutting height: 100mm - min. cutting width: 230mm - max. cutting width: 2250mm - max. cutting length: 3000mm - with scoring saw - max. scoring saw diameter: 120mm - spindle diameter: 20mm - power of scoring saw motors: 2 x 0.75kW - power of main motors: 2 x 4kW - electric adjustment of cutting head - power of carriage feed motor: 0.37kW - 2 types of rotational speeds: 3000, 4500 - diameter of dust extraction nozzle: 2 x 130mm - overall dimensions (L/W/H): 4000 x 1300 x 1100mm - shipping dimensions (L/W/H): 4000 x 1300 x 1100mm - weight: approx. 1100kg ADVANTAGES – Polish production – Electric adjustment of cutting head – DTR documentation – with scoring saw – very good condition – used double-blade saw Iijdpfx Asz Dim Ajhneg Net price: 12,900 PLN Net price: 3,071 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), functionality: fully functional, Machine specifications: Iijdpfsz Dh Ixsx Ahnjg Table size: 1,800 × 1,800 mm X-axis travel: 3,500 mm Y-axis travel: 2,147 mm measured from the machine table Y-axis clearance: Reaches 70 mm below the table edge Z-axis travel: 3,236 mm W-axis travel: 800 mm Maximum workpiece weight: 25,000 kg Maximum spindle speed: 2,500 rpm CNC control/software: Siemens EdgeCAM can also be used Machine table rotation: 360°

Condition: used, Year of construction: 2017, functionality: fully functional, feed length X-axis: 160 mm, feed length Z-axis: 650 mm, PALMARY GU32X60 NC cylindrical grinding machine, year 2017, designed for external cylindrical grinding operations. The machine is equipped with, among other things, a 40 l/min paper filter, a CM5 collet chuck, and scales on the X and Z axes. TECHNICAL SPECIFICATIONS Capacities Maximum diameter above the table Ø 320 mm Distance between centers 600 mm Maximum external grinding diameter Iijdpfx Ahezzppnonjg Ø 300 mm Maximum load between centers 150 kg Grinding wheel Grinding wheel dimensions Ø 405 x 50 x Ø 127 mm Linear speed 45 m/s X-axis Manual travel 160 mm Automatic rapid traverse 40 m/min Maximum travel 250 mm Minimum adjustment unit 0.001 mm Handwheel rotation 2 mm Graduation 0.005 mm Z-axis Travel speed 1.5 m/min Maximum travel 650 mm Minimum travel in automatic reciprocating motion 8 mm Travel per handwheel rotation 20 mm Pivot angle -2° to +10° Work spindle Pivot angle -30° to +90° Variable speed 10 to 300 rpm Maximum spindle load, including tool holder 35 kg Maximum length 150 mm Tailstock Travel 25 mm Fine adjustment range ± 0.03 mm Motors Grinding wheel spindle 3.7 kW Work spindle – AC servomotor 0.85 kW Hydraulic pump 0.37 kW Grinding wheel spindle lubrication pump 0.18 kW Coolant pump 0.18 kW EQUIPMENT 40 l/min paper filter CM5 collet chuck X-axis scale Z-axis scale

Year of construction: 2025, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S25Lybra04, Exhibition facility - like new. LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Isdpfxsykubij Ahnsig Other systems available immediately from the Ludwigsburg warehouse.

Condition: used, Rotating Device Gunter Seibold Rotating Device for HTS Coils – Steplessly Adjustable Drive (Type S05082) Description: Professional rotating device designed for accommodating and rotating HTS coils with a winding core. Developed to ensure even distribution of two-component resin during the curing process. Ideal for development, laboratory, or manufacturing environments working with high-temperature superconductor coils. The winding form is electrically heated, with power supplied directly to the form (not included in the scope of delivery). The machine stands out for its precise control, user-friendly operation, and maintenance-friendly design. Technical Features Iedpozil R Rjfx Ahneig Solid Machine Base: Welded square tube construction with leveling screws and floor anchors Drive: Three-phase planetary gear motor (11 kW, 400 V, 50 Hz, 3 phases) Steplessly adjustable speed (0.2 – 100 min⁻¹) Soft-start & soft-stop via frequency inverter (4-quadrant controller) Electromagnetic spring-applied brake (safe stop in case of power failure) Selectable clockwise/counterclockwise rotation Control Panel: 5.7" touch panel for configuring speed, direction, ramps, time, or total rotations Emergency stop button, ergonomically integrated 2 programmable analog inputs Electrics & Control Cabinet: Control system integrated in the machine base 400 V / 230 V supply, 24 V DC control voltage Circuit breakers, RCD 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with climate control unit Complete grounding & static discharge of the main shaft Adjustable workplace lamp, tiltable and height-adjustable Specifications Feature / Value Max. coil diameter: 1,500 mm Coil passage: 1,700 mm Center height above floor: 1,100 mm Max. load on faceplate: 500 kg Faceplate Ø 600 mm, 4 T-slots (DIN 650) Speed range: 0.2 – 100 min⁻¹ (stepless) Torque: 775 – 539 Nm Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Connected load: 11 kW Connection current: 32 A Color scheme (according to RAL): Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Control panel / cabinet: Light grey (RAL 7035 / 5010) Weight: approx. 1,800–2,000 kg Condition: used Scope of delivery: (see picture) (Subject to change and error in the technical data and information!) We are happy to answer further questions for you by phone.

Year of construction: 2007, condition: ready for operation (used), Offered is a Kocher + Beck rotary die cutter/rotary die cutting system, sheet die cutting machine approx. year 2007. Sheet format X/Y approx. 500mm/720mm, material thickness up to max. 0.5mm, die cutting width max. 540mm, unwind max. 732mm, axial adjustment of the magnetic cylinder: +/-7.5mm, machine dimensions X/Y/Z: approx. 2100mm/1150mm/1500mm, weight: approx. 450kg. Inspection possible by arrangement. Iiedpoxy R E Uofx Ahnsg