Used Rotating Harrows for sale (7,970)

Condition: excellent (used), Year of construction: 2019, operating hours: 18,800 h, functionality: fully functional, machine/vehicle number: AAKJ4001, clamping force: 12,000 kN, screw diameter: 110 mm, clearance between the columns: 1,250 mm, column diameter: 220 mm, displacement volume: 5,701 cm³, injection pressure: 1,700 bar, injection weight: 5,244 g, mold height (min.): 500 mm, ejector force: 3,50,000 N, ejector stroke: 350 mm, opening stroke: 1,300 mm, plate length: 2,610 mm, plate width: 1,800 mm, plate height: 1,800 mm, total length: 13,200 mm, total width: 3,400 mm, total height: 3,500 mm, overall weight: 63,000 kg, heating capacity: 55 kW (74.78 HP), pressure: 178 bar, number of injections: 1, pump power: 2,04,000 W, power: 260 kW (353.50 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 512 A, Equipment: documentation/manual, The machine has been used sparingly and is in very good condition. It has been well-maintained. The machine only processes ABS and PP. The machine’s control system is B&R. The machine is equipped with numerous accessories, including 3 air valves, two hydraulic valves, a servo valve for table movement hydraulics, 22 tool heating zones, a water manifold with 8 zones, screw heater insulation, hydraulic screw rotation for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a euro-map for the robot, a door with automatic opening, and an electrical cabinet with sockets. The machine also has water blocks on both the moving and stationary tables, each with 8 connections. In addition, several spare parts are included, such as a complete torpedo, a screw nozzle, heaters, temperature sensors, and specific seals for the hydraulics, as well as a self-filtration filter and a torpedo wrench and auxiliary ejector rods. A Wemo robot can also be sold with the machine; while it is not part of this listing, it can be purchased separately and added to the machine later. It was used with the machine and is adapted for it. Hedpfxjznbqqj Aftsfl

Condition: used, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 29,900 mm, total length: 9,140 mm, Rotating forklift Manitou MRT 3060 Drive Diesel Year built 2026 Lifting height (mm) 29,900 Hodpfoztggusx Aftsfl Lifting weight (kg) 6,000

Year of construction: 2005, condition: excellent (used), functionality: fully functional, machine/vehicle number: 14764, Key operating data Motor power (standard): 5.5 kW Cutting diameter of the rotor: 300 mm Rotor width / cutting length: 125 mm Rotor speed: 230 rpm (slow-speed system for noise and dust reduction) Average output (throughput): 80 kg/h (depending on the type of plastic and the mesh size of the screen) Hodpfeztplgex Aftsfl Power supply: 3 x 400 V + N, 50 Hz Cutting system and working chamber Opening of the shredding chamber: 450 x 335 mm Opening of the feed hopper: 490 x 420 mm Number of rotating knives (on the rotor): 10 Number of fixed knives (on the stator): 2 Cutting geometry: Shear cutting with a slanted rotor, which facilitates the handling of three-dimensional parts Standard screen: Mesh size 6 mm (round, interchangeable) Particle size of the recovered regranulate: Standard 4–8 mm (depending on the installed screen) External dimensions and weight Machine length: 1100 mm Machine width: 900 mm Machine height: 2100 mm (for the version with a high stand frame for dust extraction) Total weight: 500 kg Additionally: new replacement knives, three screens with 5, 6 and 8 mm Cross magnet in the feed hopper!

Condition: used, mileage: 2,21,000 km, power: 105 kW (142.76 HP), first registration: 07/2016, fuel type: diesel, overall weight: 3,500 kg, color: red, gearing type: mechanical, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Special equipment: Hfjdpfjz Aw Afex Aftsl 13-pin trailer socket, Audio system Audio 15 (radio with color display), outside temperature display, 180 A generator, ladder rack behind the cab, Becker MAP Pilot navigation system, spare wheel with road tires, spare wheel holder under the frame end including jack, rotating beacon, interior rearview mirror, rear wall with window, seats in the cab: double passenger seat, rear stabilizer, reinforced front stabilizer, storage compartment on the left and right below the platform/body, reinforced shock absorbers, fuel gauge for auxiliary heater, 95 Ah absorbent glass mat (AGM) battery, reinforced front axle, pre-installation for tachograph, auxiliary heater (hot water) Adaptive brake light, driver-side airbag, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both sides, exterior mirrors with integrated turn signal, 74 Ah battery, braking system with ABS+ASR, headliner in the cab, lockable glove compartment, body/superstructure: standard double-cab pickup bed, fuel tank: main tank 75 liters, headlight range adjustment, model update, engine 2.1 liters - 105 kW CDI CAT, wheelbase 3665 mm, low emission according to emission standard Euro 6, safety belt system with warning system (driver side), seat cover/upholstery: fabric Lima, seats in the cab: adjustable passenger seat, service interval display Assyst, heat-insulating glass, permissible gross weight 3.50 t.

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS was manufactured in 2019. It features impressive X/Y/Z axis travels of 1,270 x 508 x 635 mm and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer capacity of 30+1 tools and offers high-speed machining capabilities. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining center we have for sale. Contact us for further details. • Tool taper: BT-40 • Rapid Traverse: 35.6 m/min • Cooling pressure: 21 bar • Chip conveyor: Screw-Type Chip Conveyor • Machine Type: Vertical Machining Center • Spindle Nose to Table: 102 mm • Max. Cutting Feed Rate: 20.5 m/min • Tool Changer: Random • Tool Changer Capacity: 30+1 tools, vertical • Power Failure Detection Module: Yes • Interface: USB / LAN • Rigid Tapping: Yes • Coordinate Rotation System: Yes • Programmable Coolant Nozzle: Yes Hfsdpfsz Ah S Dox Aftjl • Automatic Air Blast: Yes • Renishaw Wireless Intuitive Probing System: Yes • Macro Variables and Scaling Factors: Yes • High-Speed Machining: Yes • Auxiliary High-Pressure Filter: Yes

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Hfjdpozzrutefx Aftjl Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Year of construction: 2006, operating hours: 7,000 h, condition: excellent (used), functionality: fully functional, X-axis travel (longitudinal axis) mm 7280 Y-axis travel (transverse axis) mm 525 Z-axis travel (vertical axis) mm 380 A-axis rotation (spindle rotation) mm from 0° to 180° continuous Maximum positioning speed X-axis m/min 80 Maximum positioning speed Y-axis m/min 60 Maximum positioning speed Z-axis m/min 30 Maximum A-axis positioning speed From 0° to 90° in 1" Electrospindle power kW 7 Electrospindle speed rpm variable up to 20,000 Tool holder taper HSK-40E Tool magazine capacity qty. 8 Number of clamps qty. 8 Automatic clamp positioning Installed power kW 16 Residual-current circuit breaker on main line A 0.3 Weight t 4.8 Hfodpfxjyi Umpj Aftol Operating pressure bar 6 ÷ 8

Condition: good (used), Year of construction: 2007, 4 units of THWAITES all-wheel-drive dumpers with rotating dump beds! Hfodpfxeznlwhs Aftjl Dumper 1: Year of manufacture: 2007 According to the meter: 1,450 hours 1,000 kg payload 1,300 kg weight 15.9 kW SOLD!!! Dumper 2: Year of manufacture: 2008 According to the meter: 1,504 hours 2,300 kg payload 2,030 kg weight 24.8 kW Selling price: 10,900,-- net Dumper 3: SOLD!!! Dumper 4: SOLD!!! All 4 units are immediately ready for use and in good condition! All 4 units have all-wheel drive and a rotating dump bed! All 4 units have Dutch road approval! Affordable delivery is also possible!

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, roller stand rotating device -Roller stand: Container rotator without drive, 2 pieces -Roller spacing: 320 - 915 mm Hedpfxszg Urls Aftjfl -Rollers: Ø 190 x 100 mm -Load capacity: kg -Submission/Price: complete -Transport dimensions: 1000/435/H240 mm -Weight: 70 kg

Condition: used, mileage: 14,215 km, power: 81 kW (110.13 HP), first registration: 05/1980, fuel type: diesel, overall weight: 6,500 kg, gearing type: mechanical, number of seats: 2, Year of construction: 1980, Equipment: all wheel drive, crane, Very well-maintained Unimog U1100 from first owner. Equipped with an Atlas AK 3006 A crane featuring 1x hydraulic extension, a maximum working height of 10 meters, and 5th & 6th hydraulic functions (e.g. for grab or bucket). The vehicle has only 14,215 km and 839 operating hours. Collector’s condition. * Atlas AK 3006 A * 3,300 kg at 2.93 m * 1,620 kg at 4.77 m * 1,200 kg at 6.07 m * Optional: 3x mechanical extensions * 980 kg at 7.42 m * 730 kg at 8.73 m * 520 kg at 10.04 m * Working height: 10 m * Additional control circuit on crane (e.g. for rotator or grab) * 4-point outriggers * Remote control * Front hydraulics (e.g. for snow plow) * Selectable all-wheel drive with differential locks * 2x trailer hitches * Reversible gearbox with 8 forward + 4 reverse gears * Air-suspended driver’s seat * Engine: OM 352, 6-cylinder, 5,638 cm³, 81 kW * Registration as self-propelled work machine possible * Odometer: 14,215 km * Operating hours: 839 Hfsdpfxozdcvzj Aftol * Vehicle is from first owner Financing available through our partner banks, we are happy to assist you. Please note: Intermediate sale reserved, as this item is also advertised on other platforms. Accessories information without guarantee. Subject to change, prior sale, or errors. We offer and strongly recommend viewing and inspection to ensure buyers have a correct impression of the vehicle’s condition and suitability. Inspections and test drives are possible anytime by appointment and are expressly desired.

Condition: ready for operation (used), A complete and used robot gripper tool for Bags in good condition - was previously mounted to a 4 axis Palletising robot with a 130Kg payload for Palletising bags - tool is fitted with vacuum cups and rotating arms for handling layer sheets also - tool is adjustable and is fitted with all the necessary sensors and valves. Please request more pictures and videos via Whats app Hjdpfx Afoz An Raetofl ISO flange mounting Ready to ship worldwide We offer competitive shipping costs and take care of all export paperwork.

Condition: good (used), Fork carriage, rotator for wheel loaders, forklifts, telescopic handlers, forklifts, rotator, forklift rotator -Manufacturer: Stabau, forklift rotator 360° continuous rotation -Type: unfortunately without a type designation -Load capacity: approx. 2,500 kg Hjdpfx Aezkg U Hoftefl -Mounting dimensions: see photos -Dimensions: 1050/205/H755 mm -Weight: 353 kg

Condition: new, Year of construction: 2026, load capacity: 10,000 kg, Column lifting and rotating device, 10 tons lifting capacity, available as a set or individually. Driven on 2 sides. The machine is offered as a set for synchronous operation or individually. Protec rotating device / positioner Syncrolift. Double column, hand-held remote control, wireless and manual. Column adjustment, 2x electrically adjustable (at extra cost). Hedpfx Afswtq Dtotefl Lifting capacity 10,000 kg, 360°. Minimum working height: 800 mm. Maximum working height: 1700 mm. Speed: 0.5 RPM. Diameter of clamping plate: 900 mm. Rotating movement: 2 x 2.2 kW. Torque: 18950 Nm. The machine is also offered individually as a mono model (more affordable). Optional with a universal joint flange (cardan flange).

Condition: used, NET NEW Net 4-row rotatable / Hfodpfxjtx Dk Ao Aftol

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1160235, SPECIFICATION Table size 1370mm x 620mm X axis traverse 1016mm Y axis traverse 660mm Z axis traverse 635mm Spindle nose to table 102 – 737mm Spindle BT40 Spindle speeds 0-12,000rpm Spindle motor 22.4kW Rapid feed rate 18m/min Toolchanger capacity 30+ 1 tools Approximate weight 7750Kg   Hfodpezz Ndrsfx Aftsl MACHINE EQUIPPED WITH: - Haas CNC Control Swarf auger High speed machining Co-ordinate rotation and scaling Rigid tapping Filtermist extraction system Programmable coolant nozzle Lighting Guarding

Condition: used, functionality: fully functional, load capacity: 3,500 kg, Rotator ISO Class: ISO Class 3 = 2,500 - 4,999 kg Hfodpfx Afew Ermajtel Condition: Ready for use and fully functional Technical condition: good Description: ISO 3A (51 cm), capacity 3,500 kg, 360° rotator, width 930 mm / 1000 mm, ID OS1679

Condition: used, Year of construction: 1987, machine/vehicle number: 1815, functionality: fully functional, power: 5.5 kW (7.48 HP), Mortise and tenon machine with stop, control panel on top, electric feed, year of manufacture 1987, Hsdpfx Afjzizipotefl 4 speeds: 3000/4500/6000/9000 rpm with reversible motor, star-delta starter, clockwise/counterclockwise rotation, emergency stop switch.

Condition: used, input voltage: 380 V, total length: 1,320 mm, total width: 940 mm, total height: 830 mm, tank capacity: 250 l, overall weight: 540 kg, power: 1.5 kW (2.04 HP), Ref: SP 100 L Flour capacity: 100 kg Dough capacity: 160 kg Bowl volume: 250 L Number of speeds: 2 Tool speeds: approx. 110 / 220 rpm Spiral power: 6.5 kW Bowl power: 1.5 kW Timers: 2 Bowl rotation: right / left Controls: push buttons Hjdpfez Arlusx Aftsfl Dimensions: 940x1320x830mm Weight: 540 kg KEMPER SP 100 L spiral mixer – 100 kg of flour The KEMPER SP 100 L is a professional spiral mixer with a fixed bowl, designed for bakery productions requiring large-scale kneading. Its documented capacity reaches approximately 100 kg of flour for 160 kg of dough, with a bowl of approximately 250 L. This configuration makes it a suitable model for bakeries seeking high capacity while maintaining a simple workflow around an integrated bowl. Why this model stands out The SP 100 L uses the zone kneading principle developed by KEMPER. The dough is worked between the spiral and the bowl according to a geometry designed to promote homogeneous kneading while limiting its heating. The model has two speeds, with tool speeds of approximately 110 and 220 rpm, to differentiate the phases of the cycle. Two electromechanical timers allow the working times to be adjusted. The bowl rotation is reversible, to the right or left, which provides greater control during incorporation and kneading. Key advantages 100 kg flour capacity 160 kg dough capacity 250 L bowl Two kneading speeds Two electromechanical timers Reversible bowl rotation (right / left) Bowl and spiral made of stainless steel KEMPER zone kneading system Bowl protection with safety device Closed body facilitating routine maintenance

Condition: used, Year of construction: 1992, operating hours: 6,254 h, Wheel loader ZL 1801 with original 6,254 operating hours Rotating beacon at the front and rear Road approval 94 kW / 128 hp Front axle load 7,000 kg Rear axle load 6,000 kg Hjdpfxezahgqj Aftsfl Wheel loader in good overall condition, fully functional. No liability for typographical or data transmission errors. Subject to errors and prior sale. Daily cash purchase of used commercial vehicles, construction machinery, trailers and semi-trailers from the year 2000-2026. Nationwide delivery possible.

Condition: excellent (used), Year of construction: 2021, For sale is a high-quality Format4 Profil 45 M from Felder. This machine was manufactured in 2021 and is in excellent condition. The Profil 45 M is a heavy-duty, precision swivel spindle table saw designed for professional use. The electric adjustment of the milling spindle and the fence allows for comfortable, quick, and very precise operation. Features and technical data: +Manufacturer: Format4 / Felder +Type: Profil 45 M +Year of manufacture: 2021 +Condition: very good +Robust and low-vibration industrial design +Stable cast iron milling table +Electric height adjustment of the milling spindle +Electric milling spindle swivel from -5° to 45° +Digital display for spindle height and swivel angle +Milling spindle quick-change system +Milling spindle diameter: 30 mm +Usable spindle height above the table: 140 mm +Milling spindle lock from the outside +Five speeds: 3,500 / 4,500 / 6,000 / 8,000 / 10,000 rpm +Right and left rotation +Large milling table opening: 320 mm +Milling fence for tools up to a maximum diameter of 250 mm +Electromotive MULTI adjustment system for the milling fence +Digital display of the fence position +Anodized aluminum fence scales +Working height: approx. 890 mm +Dust extraction connections on the milling fence and under the table +Weight depending on equipment: approx. 730 kg +Operating voltage: 400 V Comfortable and precise operation: The height and angle of the milling spindle are conveniently adjusted electrically and read off precisely via digital displays. The milling fence can also be adjusted electromotively. This allows for quick, precise, and reproducible adjustments. The milling spindle quick-change system enables rapid tool or spindle changes and significantly reduces setup times. The milling fence can be conveniently folded away for tool changes. Thanks to the large table opening, even larger milling tools can be safely used below the table. Hjdpfjzz Nm Tox Aftofl The rear-swiveling milling spindle ensures comfortable workpiece guidance, good chip removal, and allows for the trouble-free use of a feed device even when swivel milling. An extremely stable and user-friendly table saw for demanding milling operations, individual pieces, and professional series production. -Inspection and a test run are possible after prior arrangement. -Loading on-site is no problem. -You will receive an invoice with VAT shown. -Price: €10,500 net

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, roller stand rotating device -Roller stand: Container rotator without drive, 2 pieces -Roller spacing: 315 to 965 mm -Rollers: 2 pieces on each side, Ø 250 x 140 mm -Load capacity: kg -Dimensions: 890/440/H800 mm -Submission/Price: complete -Transport dimensions: 890/880/H800 mm Hedpoy R Nrqsfx Aftsfl -Weight: 506 kg

Condition: used, Year of construction: 2013, .30 Base machine ACCORD 30 FX N. 1 CONCEPTCNC machining center with a moving gantry and a fixed worktable for processing various sheet-like materials: chipboard, MDF, laminated solid wood, plastic materials, and light alloys. STRUCTUREThe machine is developed using the best three-dimensional CAD systems for solid modeling. The machine bed and moving crossbeam represent the two main elements of the machine structure and are manufactured in the company's own foundry. All mechanical machining operations are carried out on special production equipment in a single setup to ensure optimal precision and to minimize tolerances during machining. The control cabinet is mounted directly on the machine bed, allowing for a very compact design and easy access. CONTROL UNITThe control unit consists of an industrial NC control system with an integrated office PC (desktop computer). The CNC solution with an office PC combines all the features of numerical control with the typical user-friendliness of an office PC, which greatly simplifies the control of the machine by enabling the use of the XILOG MAESTRO user interface, i.e., the software developed by SCM for simple and fast programming, even for non-experts. GENERAL FEATURESPassage height: - 250 mm with H50 accessories- 190 mm with H110 accessoriesPendulum machiningAutomatic lubrication of the axesAir conditioning system to maintain the correct internal temperature in the control cabinet. Software for remote customer serviceOperator interface Xilog MAESTRO with integrated CAD/CAM, which allows for the extremely simple execution of products even with special shapes.A number of advanced functions allow for: - programming via macros- creating and managing subprograms- optimizing machining- managing all machine functions- creating and managing a database of tools93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz R0.00.03 LINGUA P.C. GERMAN 02.12.57 ACCORD 30 FX - Worktable X-Y = 3680x1380 56.05.25 No. 6 Support rail MATIC - L1300 The worktable is equipped with: - no. 2 lateral fixed supports- no. 6 aluminum supports, motor-driven and movable along the X-axis- motorized conveyor belt for unloading chipsEach movable support has: - no. 3 motor-driven support rails for clamping cylinders and vacuum suction cups- air blower for cleaning on each movable support- pneumatic locking/release for quick replacement of the clamping cylinders and vacuum suction cups- preparation for lifting devices- preparation for reference stopsThe workpiece vacuum clamping system is divided into 2 independent worktables.23.02.19 DUO Prisma K working unitThe working unit with 5 interpolating axes is located on the moving crossbeam, which provides maximum stability during milling and thus also ensures optimal machining quality of the workpieces, even with high material removal rates. It allows for rotation around the axes arranged at 50° to each other and has many advantages over traditional 5-axis working units, such as: - the full use of the work areas both with 5 axes and with a vertical spindle- spindle external dimensions outside the working area- a particularly light design for horizontal machiningThe unit has a central chip extraction system. Hfjdpfx Aozl Ap Neftjl

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 1,200 h, load capacity: 6,000 kg, lifting height: 26,000 mm, fuel type: diesel, mast type: telescopic, construction height: 3,100 mm, power: 115 kW (156.36 HP), fork length: 1,200 mm, empty load weight: 18,000 kg, total length: 8,080 mm, drive type: Diesel, construction width: 2,500 mm, Rotating Telescopic Handler Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: As new Technical condition: Very good Front tires type: Pneumatic Front tires size: 18-22 Front tires condition: 80-100% Rear tires type: Pneumatic Rear tires size: 18-22 Hedpjzxu Hmsfx Aftefl Rear tires condition: 80-100% Description: Thanks to its 3-in-1 design (telehandler, crane, and work platform), the MRT 2660 is a highly versatile tool for your material handling needs. The MRT 2660 can lift up to 6 tonnes, and its pentagonal boom profile along with exceptional 360° visibility ensures precise control over your loads. With 360° rotation, you can perform various tasks without repositioning the machine. It can be used on wheels or stabilizers, which provide an increased footprint for safe operation. The MRT 2660 is intelligent, ergonomic, and comfortable, making it ideal for construction and industrial applications. It is a powerful and precise tool you won’t want to be without! A variety of attachments such as man basket, winch, or bucket are available for this telehandler. 3rd hydraulic valve, heater, full cab, air conditioning,

Condition: used, mileage: 6,25,000 km, power: 338 kW (459.55 HP), first registration: 04/2019, fuel type: diesel, overall weight: 18,600 kg, axle configuration: 2 axles, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, Special equipment: Exterior mirrors and wide-angle mirrors, electrically adjustable and heated, Battery 225 Ah, Co-driver's seat comfort, air-suspended and heated, with lumbar support and shoulder adjustment, Front bumper trim, chrome, Curb mirror, right, electrically adjustable and heated, Roof antenna CB radio, Differential lock, rear axle, Air horns on the cab roof (2), ETA circuit breaker, Cab: with air suspension, Driver's seat comfort, air-suspended and heated, with lumbar support and shoulder adjustment, Flame starter system, Rocker arm - EVBec-controlled brake, Heated air dryer, Auxiliary air heater Eberspächer D4S, Emergency battery cut-off switch, Rotating beacon (2), Exterior sun visor, Sound system, Cab socket 12V and 24V, Control module for fleet management system, Door extension for cab, Additional long-range/fog lights with cornering lights Additional equipment: Axle configuration: 4x2, Ambient lighting, Approach/front mirrors, Trailer socket 24V / 7-pin, Anti-slip control (ASR), Audio system: Radio MAN Media Truck Advanced 12V with navigation system preparation, On-board computer MAN-Tronic, Electronic braking system MAN-Brakematic, EURO 6 engine, Cab: with Nordic insulation, Cab: XXL, Suspension: Air / Air (full air), Electric windows, Remote control central locking, Windshield tinted, Generator 28 V 80 A, Gearbox 16-speed - Type: ZF 16 S, Body/superstructure: Semi-trailer tractor, Rocker arm - EVB brake, Automatic climate control, Fuel filter, heated, Fuel tank: Combination tank - 400 liters diesel + 60 liters urea solution (AdBlue), Steering wheel with multi-function, Air intake raised, Air compressor 1-cylinder 360 ccm, Engine 12.4 L - 338 kW diesel, Engine compartment encapsulation, Wheelbase 3600 mm, Spare wheel lifter, side, Fifth wheel coupling: Jost JSK 37 C, Disc brake, rear axle, Disc brake, front axle, Rear side windows tinted, Seat cover / upholstery: Comfort quality, Sun blind, side window, driver's door, Spray mist reduction, Stabilizer on one rear axle, Storage box accessible from outside, Control type cab, TGX, Door windows tinted, Underrun protection, front, Viscous fan, Central locking, Permissible total weight 18.00 t The truck is in good condition! Service booklet up to 571,789 km! Hfsdpoz A Dv Aofx Aftsl retarder air suspension wheelbase 3600 mm

Condition: like new (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 55 rpm, total height: 2,075 mm, total width: 2,140 mm, total length: 3,250 mm, table length: 800 mm, overall weight: 2,450 kg, distance table to spindle center: 495 mm, Equipment: documentation/manual, ABENE milling machine, type VHF-320BS, in new condition, previously used in an educational institution. Specifications: - Year of manufacture: 2016 - Table dimensions: 800x400mm - X-axis travel: 600mm - Y-axis travel: 500mm - Z-axis travel: 450mm - Distance table-spindle: 45-495mm - 3-axis variable feed - Drilling spindle travel: 75mm - ISO 40 tool holder - Milling head, rotatable 140 degrees - Spindle speed: 55-3000 rpm, variable in 2 steps - Motor power: 7.5kW - Machine dimensions: 3250x2140x2075mm - Machine weight: 2450kg Machine equipped with: - SONY (Magnescale) digital readout on 3 axes - Variable spindle speed (digital display) - Variable feed, 3 axes (digital display) Hfjdpfezt Ibtjx Aftel - Cooling system - Drilling spindle - Tool changer - Machine manual - Compliant with occupational safety regulations