Used Sajjad Lichner Lathe for sale (5,495)

Condition: used, Year of construction: 2012, Max. part diameter 39 mm Max. part length 65 mm max. turning length 58 mm control Siemens x-axis 750 mm z-axis 180/140 mm spindle tunring speed 6.000 U/min drive capacity - spindle motor 13,7 kW rapid traverse (x/z) 60/30 m/min Acceleration (x/z) 7 m/s² Tool compensation axis 3 mm Tool holder for turning tools Capto C 4 weight ca. 7.000 t In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories: - Step conveyor, Knoll Bwedpfx Absxuku Sjzew - Chip conveyor, Knoll - Robot, Fanuc - Tilting device, Sachwarz - Hydraulic unit, Bosch Rexroth Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: refurbished (used), Year of construction: 2022, turning diameter over bed: 540 mm turning diameter over slide rest: 280 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray several tool holders, 6 chisel holders, 1 holder for clamping sleeve Bsdpfx Abexugdiezsww

Condition: used, CNC control, numeric control, from GILDEMEISTER GDM 65/2A GILDEMEISTER type Eltropilot EP20 GD-2A year of manufacture 1989 Order: 150 299 Ser. No.: 0.854.183 Bsdeh Ecnajpfx Abzjww Mains connection: 220 VAC 50 Hz Rack with 20 module places - 11 Built-in modules Dimension W x H x D 480x 260 x 220 mm Weight approx. 7 kg The control comes from a lathe Gildemeister GDM 42/2A. Further components from the Gildemeister can be found under stock no: 60343, 60346, 60347

Condition: used, Year of construction: 1979, functionality: fully functional, Leadscrew and feed shaft lathe Manufacturer: WEILER, Model: COMMODOR Year: 1979 Technical Data Make: Weiler Model: Commodor Centre distance: 1000 mm Swing over bed: 400 mm Spindle bore: 50 mm Speed range: 63–2000 rpm Drive power: 4 kW Dimensions: approx. L 2.2 x W 1.0 x H 1.7 m Weight: approx. 1.5 t Equipment Bwjdpfx Abext Ngqjzjw • 3-axis digital readout • Drill chuck • 3-jaw chuck • Multifix tool holder All information without guarantee. A demonstration under power can be arranged at any time in our showroom.

Condition: new, The Sinus 330/3000 D is a top-tier Conventional Horizontal Lathe within the Engine Lathes category, renowned for its robust design and superior performance. Built on a solid one-piece cast machine bed, this lathe excels in heavy-duty tasks with a maximum turning diameter of 660 mm and a workpiece length capacity of up to 3,000 mm. Precise operation is ensured with hardened guideways and a manual multi-disc clutch for smooth spindle engagement, making it ideal for machining large parts and flanges. The integrated removable bed bridge expands functionality, while rapid traverse on two axes facilitates quick positioning for increased efficiency. Safety is prioritized with features like overload protection and a well-designed splash guard. As with all KNUTH machines, the Sinus 330/3000 D is engineered for reliability and longevity. For further details or to buy now, explore our offerings in Conventional Horizontal Lathes and Engine Lathes. Bwodpfx Abjuyh Nrszow

Condition: good (used), Year of construction: 2004, functionality: fully functional, Fanuc control, 42mm spindle bore, two turrets, sub-spindle, bar feeder, chip conveyor Bodpfxoxgqrzo Abzoww

Condition: good (used), functionality: fully functional, Type PM1-F-Z, data: Bwedpfx Abjxtvfaszjw Center height: 110 mm Center distance: 160 mm Spindle bore: 23 mm 3 right-hand speeds and 3 left-hand speeds approx. 670 / 1140 / 2840 rpm

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 250 mm Turning length : 650 mm In General: Year of construction:2007 Control:Siemens 840 D Bar capacity:65 mm Turning diameter:350 mm Turning length:650 mm Main spindle: Technology:Motor spindle Speed:5,000 rpm Power max.:35 kW Torque max.:370 Nm C-axis:0.001 Bar capacity:65 mm Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Hollow clamping cylinder Bwsdpfjxtr Iwsx Abzow Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:26 kW Torque:290 Nm C-axis:0.001 Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Partial hollow clamping cylinder Z-axis:670 mm X-axis:175 mm Tool carrier i (X/Y/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:300 Y-axis:80 mm ( +/- 40 mm) Z-axis:650 mm Tool carrier II (X/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:180 Z-axis:650 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system Measuring systems:Direct in all X-axes (glass scales) Bar loader:IRCO Breuning Part removal:Finished part gripper + indexing belt Emulsion mist separator:Mechanical Set-up mode:Electronic handwheel

Condition: used, Spare Parts Donor We are dismantling the CNC lathe GILDEMEISTER Type GDM 42/2A CNC control: Eltropilot EPL 2 Machine No. 4.5733 Year of construction: 1989 Machine not operational - electrical issues Standard turning diameter: 185 mm Maximum swing diameter: 400 mm Cross slide travel (X-axis): 190 mm Longitudinal slide travel (Z-axis): 450 mm Spindle bore diameter: 52.7 mm Draw tube spindle clearance: Ø 42 mm Feed rate X and Z axes: max. 3000 mm/min Spindle speed: 40-6300 rpm, infinitely variable Spindle drive motor power: 22 kW Electrical connection: 400 Volt, 50 Hz, 45 kVA - Hydraulic 3-jaw power chuck FORKARDT Ø 200 mm - 12-station tool turret, VDI 40, every second station driven - 6 driven tool stations - Chip conveyor with integrated coolant unit - Separate electrical cabinet - 10 tool holders VDI 40 Footprint of complete machine (L x W x H): 5000 x 2500 x 2100 mm Total weight: approx. 5.7 t Good condition Bsdpfxedzqm Rj Abzoww Transport dimensions: Footprint of base machine (L x W x H): 3000 x 2300 x 1900 mm Weight of base machine: approx. 4.8 t Footprint of chip conveyor (L x W x H): 4300 x 1200 x 1650 mm Weight of chip conveyor: approx. 500 kg Footprint of control cabinet (L x W x H): 2500 x 550 x 2000 mm Weight of control cabinet: approx. 450 kg Main drive motor missing Individual components available on request

Condition: used, Year of construction: 2011, turning diameter: 530 mm, controller manufacturer: SIEMENS, controller model: 840 D, number of spindles: 1, CONTROLS .. CNC controls SIEMENS 840 D BASIC FUNCTIONS .. design principle: vertical spindle .. number of spindles: 1 .. number of x/z slides: 1 Bodpfx Aoxt Dkwebzoww .. number of turrets: 1 .. live positions: yes .. number of c-axes: 1 WORKING RANGE TURNING .. turning diameter (max): 530 mm .. worpiece length max.: 200 mm MAIN SPINDLE .. spindle revolutions (max): 4000 /min .. c-axis: yes X/Z SLIDE .. tool fixture: Turret .. number of tool positions (total): 12 .. - rotation speeds (max): 8000 /min ELECTRICAL SPECIFICATIONS .. total power consumption: 71 kW .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 9500 mm .. space requirements -front/back-: 5000 mm .. total height: 4200 mm .. total weight approx.: 13500 kg - Axes: X / Z / C spindle / A turret / including life tool - The machine features a VDI 50 turret with 12 positions. - Feed roller conveyor with pickup station - 20 bar internal cooling

Condition: new, The Basic 170 Super PRO is a high-performance Conventional Horizontal Lathe from the renowned brand KNUTH, designed specifically for metalworking applications. Over the years, the Basic series has established itself as a reliable choice for mechanics, featuring a modern ergonomic design and extensive standard equipment to meet the demands of contemporary users in workshops and training centers. This lathe boasts a turning diameter over bed of 354 mm and a center width of 1,000 mm, providing robust construction from high-quality cast iron for maximum stability. With hardened and ground gears for quiet operation, adjustable spindle bearings for precision, and an effective coolant system, the Basic 170 Super PRO ensures long tool life and minimal maintenance. It also features ample storage for accessories and an easy-to-use position indicator for auxiliary functions. For universal applications in repairs, training, and production, you can request a quote for this exceptional Conventional Horizontal Lathe today. Bwjdpfxouyhvxe Abzjw

Condition: good (used), Mounting bracket adapter, cross table, for mounting three-jaw chucks, three-jaw lathe chucks -Manufacturer: Scheelen, clamping bracket for lathe -Photo: Short cone 6 -Groove: 70 x 13 mm -Dimensions: see photos Bjdpfexugl Hjx Abzjww -Dimensions: 300/185/H180 mm -Weight: 26.3 kg

Condition: good (used), Year of construction: 1976, Bed has been newly hand-scraped! Swing over cross slide: 300 mm Spindle speed: 7 - 1,400 rpm Chuck diameter: 250 mm, 3-jaw scroll chuck Footprint: 2.9 x 1.4 x 1.5 m (L x W x H) Machine is in excellent condition, as it was only used intermittently by the previous owner, meaning it has low operating hours. Bsdexr A D Tepfx Abzeww

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Bwsdpfowz Rifex Abzsw Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: new, The V-Turn 410/1000, part of the Conventional Horizontal Lathes category and under the Engine Lathes group, is a precision lathe that excels in both precision and production applications. This bestselling machine features a robust inverter and a high-performance 5.5 kW motor that enables spindle speeds of up to 3,000 RPM, ensuring efficient processing of workpieces with small diameters. The constant cutting speed function automatically adapts to the turning diameter during face turning, delivering superior quality akin to that of CNC machines. Built on a heavy ribbed machine bed and a solid one-piece cast-iron frame, the V-Turn provides exceptional stability for heavier machining tasks. With its wide, hardened guideways and large spindle bearings, it guarantees excellent concentricity and longevity. The extensive standard equipment includes a 3-axis position indicator, coolant system, and a quick change tool holder, among others. Experience the precision of KNUTH's V-Turn 410/1000—request a quote today and enhance your machining capabilities in the Conventional Horizontal Lathe category and Engine Lathes group. Bsdpfxop Aua Uj Abzoww

Condition: good (used), Year of construction: 2008, For sale is 1 Scherer VDZ 80 DS with the following technical data: Rotation diameter: 120 mm z-axis (vertical): 265 mm x-axis (horizontal): 280 mm Diameter in the front bearing: 85 mm Bwedpfx Absxr A Dtozsw Diameter in rear bearing: 75 mm 2 x A4 spindle Spindle unit drive Rated power: 16.8 kW Nominal torque: 100 Nm Speed: 1000 - 7000 rpm Traversing speed z-axis: max. 30 m/min Traversing speed x-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation available. Attention! The system will probably have to be reprogrammed somewhat, as it was part of a complete line. However, a single program is available.

Condition: used, L + Z Lathe WEILER Type Condor 81 A Machine no. No. 36553 Year of construction approx. 1985 center distance 750 mm Turning diameter over bed 330 mm Center height over bed 165 mm Turning diameter over support 180 mm Center height above support 90 mm Spindle bore 40 mm Chuck holder short taper DIN 55027 size 5 Tailstock inner taper MK 3 Pinol adjustment 110 mm Bwsdpok S Ht Ajfx Abzsw Spindle speed 45 - 2800 rpm 16 steps Drive power 3 kW Mains connection 400 Volt, 50 Hz - Spindle speed via 16 gear steps - 3-jaw lathe chuck Ø 160 mm RÖHM with with drilling and turning jaws - Multifix size B quick-change steel holder with 3 inserts - Automatic longitudinal and planar feed - Electro-mechanical spindle brake - Emergency stop - Coolant tank with pump in the machine base, without supply line to the work area - Folding chuck guard - Splash guard - 1 piece rotating center point - Electrical diagram and operating instructions Space requirement L x W x H 1850 x 950 x 1400 mm weight 1100 kg good condition

Condition: good (used), Year of construction: 2004, For sale are 2 pieces of shearer VDZ 80 DS with the following technical data: Bwedpoxr A Dgofx Abzsw Rotation diameter: 120 mm z-axis (vertical): 265 mm x-axis (horizontal): 280 mm Diameter in front bearing: 85 mm Diameter in rear bearing: 75 mm 2 x A4 spindle Spindle unit drive Rated power: 16.8 kW Nominal torque: 100 Nm Speed: 1000 - 7000 rpm Traversing speed z-axis: max. 30 m/min Traversing speed x-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation available. Attention! The system will probably have to be reprogrammed somewhat, as it was part of a complete line. However, a single program is available.

Condition: used, Automatic lathe, turning machine with copy attachment UMA Type F1 NK 60 Copy lathe for chuck parts Machine no. 28-0031 Year of manufacture: 1971 Maximum turning diameter: 150 mm Swing diameter over bed: 400 mm Turning length: approx. 200 mm Spindle bore in machine spindle: approx. 42 mm Spindle speeds: 580 / 930 / 1480 / 2380 rpm, 4 steps Main motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gearbox steps - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying unit SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system mounted below the machine bed - Hydraulic unit positioned behind the machine - Operating manual, electrical diagram, hydraulic diagram Bsdoib D H Repfx Abzeww Space requirement automatic lathe with hydraulic unit (L x W x H): 2900 x 1900 x 1700 mm Space requirement automatic lathe (L x W x H): 2400 x 1900 x 1500 mm Space requirement hydraulic unit (L x W x H): 1400 x 850 x 1700 mm Weight automatic lathe: 2400 kg Weight hydraulic unit: 400 kg Total weight with pallet: 3000 kg In good condition

Condition: used, L + Z Lathe WEWAG Model 250 / 1500 make no. 20953 year of construction approx. 1975 center distance 1500 mm nominal turning diameter over bed Ø 500 mm turning diameter over bed max. Ø 510 mm Center height over bed 255 mm turning diameter over support Ø 300 mm Center height over support 150 mm spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm. 24 steps Bwodpfx Abelzm Eqjzjw lathe chuck support short taper DIN 55022 tailstock inner taper MK 5 drive power 4 kW and 6,7 kW pole-changing - 3-jaw lathe chuck BISON, Ø 250 mm - steel holder 4-fold for turning - fixed lynette - control cabinet fixed on the back of the machine weight 2500 kg

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 Bwjdpfxsh Hvk Ao Abzew center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Condition: used, L + Z Lathe WAFUM Type TUD 40 Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Bsdpfxew Uf Hws Abzoww Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg good condition

Condition: used, Precision Lathe BOLEY Type 4 LE Conventional High-Precision Universal Multi-Function Machine Tool Serial No. 42562 Centre Distance 500 mm Swing over bed 240 mm Centre height over bed 120 mm Swing over cross slide 140 mm Centre height over cross slide 70 mm Spindle bore 23 mm Chuck mounting M40 x 3.5 mm external thread Tailstock taper MK 2 Quill stroke / travel 80 mm Spindle speed 30 - 1300 rpm Drive power 1.1 kW Power supply 400 V, 50 Hz - 3-axis digital readout RSF ELECTRONIC, Type Z503ST-220 - Position display HEIDENHAIN, Type VRZ 136B for rotary encoder - LCD display unit for measuring equipment on accessories - Spindle speed adjustable via 2 V-belt stages, 2 gear stages, and infinitely variable via variator belt drive - Longitudinal feed via change gears + set of change gears - Several 3-jaw and 4-jaw chucks Ø 100, 125, and 140 mm with chuck jaws - MULTIFIX quick-change tool post size A with 8 exchangeable tool holders - Vertical slide with clamp - Several clamps and vices Bwodpfx Ajw Dvv Aobzsw - Clamping plates + fixture tables - Indexing table as dividing attachment - Dividing head with collets and tailstock - Heavy dividing attachment with clamping plate and handwheel drive - WOHLHAUPTER spindle tools and milling cutters + collets - Rapid-traverse spindle with pneumatic drive - Milling slide with collet chuck - External cylindrical grinding attachment - Live centre - Steady rest - VOGEL central oil lubrication - Built-in mini compressor (3.5 bar) in machine base - Compressed air maintenance unit for tooling - Operating manual - Machine mounted on steel plate (steel plate 1200 x 540 x 20 mm) Required space (L x W x H) 1650 x 950 x 1750 mm Weight lathe 660 kg (with steel plate) Weight of accessories 325 kg Very good condition

Condition: used, L + Z Lathe ZMM - SLIVEN (Bulmak - Bulgaria) Type CU 325 Machine No.: 8169 Year of manufacture: 2002 Centre distance: 1000 mm Swing over bed: 320 mm Centre height over bed: 160 mm Swing over cross slide: 190 mm Centre height over cross slide: 95 mm Spindle bore: 32 mm Spindle speeds (forward): 85 - 2000 rpm, 12 steps Spindle speeds (reverse): 130 - 1300 rpm, 6 steps Feeds: longitudinal and cross Chuck flange: short taper DIN 55027 size 5 Tailstock quill taper: MT 3 Drive power: 2.2 kW Power supply: 400 Volt, 50 Hz - 3-axis digital readout RSF, type Z 730 - Spindle speed adjustable in machining direction via 12 gearbox steps - Spindle speed adjustable in counter direction via 6 gearbox steps - 3-jaw chuck BISON Ø 160 mm with 1 set of stepped jaws - 4-way universal tool post - Coolant tank with pump integrated in machine base - Spindle brake operated via direction lever - Emergency stop via foot pedal and emergency switch - Foldable chuck guard - Machine lamp - Splash guard - Travelling steady rest - Quick-change drill chuck with MT 3 taper - Multiple change gears - Operating manual with electrical diagram Bwjdpfx Abjvt U Tmozsw Installation dimensions (L x W x H): 2100 x 800 x 1600 mm Weight: 750 kg Good condition

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz Bwsdpfortd Uwsx Abzjw - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition