Used Sandblaster for sale (330)

Condition: new, maximum load weight: 32,340 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of vehicles, including those available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Full specification available upon request. Chassis: * Welded construction made from high-quality steel profiles with through-crossmembers, designed for high point loads Coupling Device: * 2-inch kingpin Landing Gear: * 2 x 12 t landing legs with compensating foot, single-sided operation on the right (FR) Axles: * 3 x 9 t air suspension axle units * Brand: SAF, with disc brakes approx. 430 x 45 mm * ABS * Hub-centric wheel connection, 10-hole, with offset 120 mm * Total air suspension lift approx. 200 mm, of which raising approx. 140 mm and lowering approx. 60 mm, controlled by rotary valve with detent function Brake System: * Dual-line compressed air brake system according to EU standard, with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Mistake-proof coupling heads fixed to the front cross member, without connector to the tractor unit Bcodpfowx Db Asx Afhsu Tires: * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 offset 120, brand of our choice Mudguards: * According to EU standard, PVC mudguards in front of and behind the axle assembly Spare Wheel Carrier: * 1 double basket with mounting material for a spare wheel with offset 120 Load Securing: * 9 pairs of foldable lashing rings, evenly distributed, traction approx. 8.0 t * 8 pairs of foldable lashing rings, evenly distributed, traction approx. 2.5 t * Outer frame drilled every approx. 500 mm for lashing belts Front Wall: * Reinforced steel construction, fixed * Interior lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor recessed in outer frame Lighting System: * According to EU standard, 24V, with multi-chamber lights * LED side marker lights * LED position lights white at front * LED outline marker lights at rear * Number plate lights * 1x 15-pin and 2x 7-pin sockets on the front cross member Equipment: * ECE 70 warning plate * Bracket for rotating beacon (without beacon) Paintwork: * Chassis and front wall sandblasted, primed and finished in a single color * Chassis: RAL 3002 flame red * Drop sides: anodized * Drop side supports: RAL 3002 flame red * SSV: aluminium anodized * Hubs: KTL * Underride guard: white (RAL 9010) * Attachments: galvanized/black KTL * Rims: silver Accessories: * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanized tube 80/50, total length approx. 1,000 mm * Magazine for 20 plug-in stanchions inside the front wall * Drop sides: 5 x 250 mm drop sides and rear wall made of anodized aluminium hollow profiles, foldable and removable, detachable Kinnegrip stanchions * Side and stanchion magazine: insertion rails for drop sides and stanchions under the chassis on left and right * Container locks for 1 x 40' and 2 x 20' containers at the rear, container lock for 1 x 20' container in the center * Work spotlight on lamp bracket * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm Extras: Rental available

Year of construction: 2025, condition: new, A sandblasting cabinet is an enclosed system designed for performing surface cleaning, roughening, or pre-paint preparation on small to medium-sized parts. Unlike large blasting rooms, cabinets are compact and self-contained, allowing operators to work in a controlled, dust-free environment — safely and efficiently. ⚙️ Main Features of a Sandblasting Cabinet Enclosed Working Area: The cabinet is fully sealed. The operator works through glove ports and views the process through a clear safety window. Nozzle (Blasting) System: Compressed air mixes with abrasive material (such as sand, corundum, steel grit, or glass beads) and propels it toward the surface for cleaning. Lighting System: Equipped with bright LED lighting for excellent visibility inside the chamber during operation. Dust Extraction / Filtration Unit: Collects and filters dust generated during blasting, keeping the air clean and maintaining operator safety. Abrasive Recovery System: Used abrasive falls into a collection hopper, is cleaned, and recycled for reuse — making the process cost-efficient and environmentally friendly. Ergonomic Design: Includes features such as comfortable working height, clear viewing window, and foot pedal controls for easy operation. 🧩 Types of Sandblasting Cabinets Pressure Blast Cabinets: Deliver abrasive at high pressure — ideal for removing heavy rust, paint, or scale. Suction (Venturi) Cabinets: Use air suction to draw and accelerate the abrasive — suitable for light cleaning and precision work. Automatic Turntable Cabinets: Include rotating tables for even, automated surface treatment of parts. Wet Blasting Cabinets Bcjdoxr Awaepfx Afhsu

Year of construction: 2025, condition: new, functionality: fully functional, The Blasting room (also called a sandblasting room or shot blasting room) is an enclosed area designed for cleaning, roughening, or surface preparation of materials such as metal, concrete, stone, or wood. Inside the room, abrasive materials (like quartz sand, steel grit, aluminum oxide, or glass beads) are propelled at high speed using compressed air to remove rust, paint, scale, or dirt from the surface and achieve the desired roughness. Main Components of a Sandblasting Room Bcodpfx Aoxr Am Ujfheu Blasting Chamber / Room: A steel-structured enclosure with wear-resistant lining to protect the interior walls. Blasting Machine (Nozzle System): Mixes compressed air and abrasive media, then directs it toward the workpiece. Dust Collection System (Filter Unit): Removes airborne dust and maintains clean air inside the room. Abrasive Recovery System: Collects used abrasive material, cleans it, and recycles it for reuse. Operator Equipment: The operator wears protective gear, including a helmet with air supply, gloves, and a blast suit. CODE DIMENSIONS OF SANDBLASTING AREA (L x W x H) mm KO - 1 4.000 x 4.000 x 3.000 KO - 2 6.000 x 3.000 x 3.000 KO - 3 6.000 x 5.000 x 5.000 KO - 4 10.000 x 5.000 x 5.000 KO - 5 12.000 x 5.000 x 4.000 KO - 6 15.000 x 5.000 x 5.000 KO - SPECIAL 27.000 x 18.000 x 9.000

Condition: used, Year of construction: 2006, filter area: 31 m², suction capacity: 2,500 m³/h, Dust extractor, welding fume extraction unit, self-cleaning cartridge filter, pneumatic, vacuum-based, for plasma cutting, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. The Absolent TSF4F dust filter is built on the latest and most efficient filtration technology. Air is drawn into the filter cartridges, while most residual particles adhere to the outside of the cartridges. The cleaned air passes through the fan into the HEPA filter, which ensures a guaranteed and constant collection efficiency of 99.99%, capturing particles with a diameter of 0.3 µm. The HEPA filter is equipped with a manometer that indicates when the cartridge needs to be replaced. When the pressure drop across the filter cartridges exceeds the set threshold, the valves in the cleaning air tank open and a pulse of compressed air is released into the filter cartridges from the cleaning nozzles. Bsdexu Hg Dopfx Afhecu Make: Absolent Model: TSF4F Specifications: Fan power: 4 kW Capacity: 2500 m3/h Sound level (operation/cleaning): 60/85 dB(A) Filtration area: 31 m2 HEPA filter area: 24 m2 Stock no.: 1078

Condition: used, Year of construction: 2010, type of input current: three-phase, filter area: 50 m², suction capacity: 5,000 m³/h, negative pressure: 3,000 Pa, Dust extractor, welding fume extractor, self-cleaning cartridge filter, pneumatic and vacuum-type, suitable for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. Brand: TEKA Model: Filtercube 2H Year of manufacture: 2010 Bcsdpfx Afow Aw Nnjhou The filter is cleaned during operation by compressed air pulses controlled by a microprocessor, ensuring high system efficiency. Low compressed air consumption due to the "Power-Spray" system. The Filtercube central extraction and ventilation unit, equipped with cartridge filters, is the ideal solution for almost any problem involving smoke and dust filtration. The fan is positioned on the clean-air side, reducing explosion risk to a minimum. Applications: - Central extraction system for multiple welding stations - Extraction system for welding robots - Extraction system for thermal cutting and grinding tables - General hall ventilation system (push-pull or displacement system) - Extraction system in combination with extraction tables - Extraction system for grinding non-explosive materials Specifications: - Soundproofed fan housing, power: 4 kW - Capacity: 5,000 m³/h - Negative pressure: 3,000 Pa - Inlet diameter: 315 mm - Filtration surface: 50 m² New filter cartridges tailored to customer specifications available on request. Stock no.: 1047

Condition: new, power: 353 kW (479.95 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, loading space width: 2,420 mm, loading space length: 5,200 mm, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, soot filter, Internal number for customer inquiries: 5-060 ---- Ideal for low loader transport, etc.! Towing capacity 30,000 kg! MAN TGS 28.480 6x4-4 BL THREE-WAY TIPPER WITH FASSI F195 LOADER CRANE Loader Crane: * FASSI F195A.2.24 e-dynamic * Lifting moment 162 kNm (16.51 mt) * Hydraulic four-section extension 12.7 m * e-dynamic hose equipment for two auxiliary devices * Slewing range 400° * Double knuckle system with PROLINK (overbending knuckle arm up to 15°) * Electronic overload cut-off with FX 500 * FASSI stability control FSC incl. LMB II * Fassi RCS remote maxi – 6 functions with 3 joysticks (2-2-2) * Special outrigger system, outrigger width 6.64 m, hydraulically extendable incl. FSC * Outriggers operable via remote control * FL-System (Full Lift) switchable high-speed valve for extensions * LED work lights Vehicle: * Leaf/air suspension * Drive 6x4-4 * MAN D26 diesel engine, 480 HP, Euro 6e * MAN TipMatic automatic gearbox * MAN TipMatic operation, with steering-column lever, manual (DNR selection, shift strategy selection) * Front axle as hub reduction axle, driven, selectable * Trailing axle, 9,000 kg, non-driven, steered, liftable * Differential locks on driven rear axle + front axle * 3,600 mm main wheelbase, 1,400 mm wheelbase between rear axle and trailing axle * 310-litre fuel tank, 35-litre AdBlue tank * Digital axle load display (ALM) for air-suspended axles * Cab NN: the practical one (narrow, medium-length, standard height) * Sunblind for windscreen, inside, electric * Driver’s comfort seat, air-suspended, with lumbar support and shoulder adjustment * MAN EasyControl control panel, 2 functions, operable from outside when the door is open * MAN Mediasystem Navigation Professional 12.3 inch Bcsdpfsxnn Txjx Afhou * Navigation map Europe and Russia * Online traffic for navigation function * Smartphone integration * MAN SmartSelect infotainment control with touchpad and direct access buttons * Standard driveline extended warranty for 3rd year of operation up to 450,000 km, conditions as per service record * And much more. Superstructure: Three-way tipper body with FASSI F195A.2.24 e-dynamic crane mounted directly behind the cab (crane with top features: radio remote control, hydraulic outriggers via radio operation, work lighting, etc.) Drop Side Platform: * Dimensions LxWxH 5,200 mm x 2,420 mm x 800 mm * (Alternative also available: load space length 4,800 mm x 2,420 mm x 800 mm) * Front wall 1,000 mm high Substructure: Robust steel welded construction, two longitudinal beams with cross members to support the 5 mm thick tipper profile and 5 mm floor plate made of Hardox or Naxtra. A fixed 1,000 mm high steel front wall with 2 lashing rings inside, positioned at each outer side at half height. Corner posts fixed, with lower locks. Rear and side walls (single piece over entire length) made of aluminium hollow profiles; side walls foldable and swinging with tailboard lift assist. Tailgate also foldable and swinging, centrally locked into the tipper profile. Floor plate made of Hardox or Naxtra, 4 mm thick, neatly welded to the tipper profile and longitudinal/cross members. Ram crosstube and tipper bracket set into the longitudinal members and accordingly reinforced. Lashing rings (4 per side) are mounted externally on the tipper floor, distributed along the length. Steel construction executed in St 52-3. All steel parts are sandblasted, body parts in RAL 9016.

Condition: used, Year of construction: 2005, filter area: 126 m², suction capacity: 6,000 m³/h, Dust extraction, welding fume extraction, filtration ventilation, self-cleaning pneumatic vacuum dust collector, absorber for plasma, laser, sandblasting, and all types of dry dust. Donaldson Torit model: TDP 1350 Cartridge filter elements are pneumatically cleaned during operation with compressed air pulses, ensuring high device efficiency. The fan is positioned after the filter on the clean side, reducing explosion risk to a minimum. Year of manufacture - 2005 Fan power 7.5 kW Capacity 6000 m3/h Filtration surface area 126 m2 Inlet diameter - 315 mm Donaldson Ultra WEB filter cartridges – 6 pcs. Stock no.: 1026 Bedsw Hrxfepfx Afhocu Height - 3.80 m Width - 1.32 m Depth - 1.36 m Base: 1.25 m x 1.25 m

Condition: used, mileage: 4,55,000 km, power: 309 kW (420.12 HP), first registration: 08/2011, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: semi-automatic, loading space length: 4,150 mm, loading space width: 2,400 mm, loading space height: 600 mm, Year of construction: 2011, Equipment: ABS, crane, Scania R 420 / 4x4 Platform 4,15 m + CRANE + REMOTE CONTROL + SANDBLASTE Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2011 ? MILAGE: 455 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ?AIRCONDITION ?POWER STEERING ? TACHOGRAPH LOADING SPACE: 415 x 240 x 60 cm CAPACITY: 9 000 kg TOTAL WEIGHT: 26 000 kg TIRE SIZE: FRONT : 385/65R22,5 BACK : 315/80R22,5 WHEELBASE: 390 cm SUSPENSION: SPRING CRANE: PALFINGER PK 11002 + REMOTE CONTROL Bcedox Ayuwjpfx Afheu TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 4662

Condition: used, mileage: 4,55,000 km, power: 309 kW (420.12 HP), first registration: 08/2011, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: semi-automatic, loading space length: 4,150 mm, loading space width: 2,400 mm, loading space height: 600 mm, Year of construction: 2011, Equipment: ABS, crane, Scania R 420 / 4x4 Platform 4,15 m + CRANE + REMOTE CONTROL + SANDBLASTE Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2011 ? MILAGE: 455 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ?AIRCONDITION ?POWER STEERING ? TACHOGRAPH LOADING SPACE: 415 x 240 x 60 cm CAPACITY: 9 000 kg Bcedpfx Asx Ayudsfhju TOTAL WEIGHT: 26 000 kg TIRE SIZE: FRONT : 385/65R22,5 BACK : 315/80R22,5 WHEELBASE: 390 cm SUSPENSION: SPRING CRANE: PALFINGER PK 11002 + REMOTE CONTROL TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 4662

Condition: good (used), functionality: fully functional, “Steinert NES 100 220 E 5009” for Sale Manufacturer: Steinert Type: NES 100 220 E 5009 Belt widthness: 1.000 mm (New belt) With new control-unit. Bsdpfx Afsxb S Srohocu Overhauled, balanced, sandblasted and painted.

Condition: good (used), functionality: fully functional, 2 Pcs. “Steinert NES 200 220 E 5009” for Sale Manufacturer: Steinert Type: NES 200 220 E 5009 Belt widthness: 2.000 mm (New belt) With new control-unit. Overhauled, balanced, sandblasted and painted. Bcedsxb Tbzepfx Afhou

Condition: good (used), functionality: fully functional, “Steinert NES 125 220 E 5009” for Sale Manufacturer: Steinert Type: NES 125 220 E 5009 Belt widthness: 1.250 mm (New belt) With new control-unit. Overhauled, balanced, sandblasted and painted. Bcjdpfxjxb S Exj Afhsu

Condition: new, AUTOMATED PAINT SHOPS These are the paint shops where your product is designed and manufactured by our engineers in line with your capacity, use area and other demands. Bcodpfxody Ez Ij Afhsu Maximum efficiency is aimed to be provided with minimum staff and the least space usage at electrostatic powder coating or wet paint, sandblasting, varnishing, glazing, coating, washing and similar system requirements.

Condition: new, 🚀 Modular powder coating systems with bar transport system Our modern painting systems with bar transfer systems offer maximum flexibility with minimal space and energy consumption. All process steps – from pretreatment to oven drying – can be carried out in a single, continuous line. 💡 Ideal for the following applications: Powder coating and wet painting Bsdpfx Afedy Ezdohscu Sandblasting Chemical pretreatment Baking and cooling 🔁 Intelligent transfer system The transport system moves the workpieces safely and efficiently through all stations of the system: Manually or motor-operated Optionally with a lifting device for heavy workpieces Parking stations for buffering and intermediate storage Compatible with automatic paint booths and walk-in booths The movement is fully automated with a continuously variable drive that enables precise control of cycle times. 🏗️ Structure & Components: Monorail conveyors for longitudinal movement Cross-guide units for direction changes Mobile carriages with product holders Load-bearing steel structure for continuous loads Control via control panel with speed control ⚙️ Efficiency through sophisticated design The system allows contactless handling – the workpiece is suspended at the loading station and remains in the same position until removed. This ensures consistently high quality and minimizes handling times. 🔧 Lifting device for loading and unloading The integrated bar lifting device enables ergonomic and safe working with heavy parts. Operators can precisely position the lifting bar at the push of a button (raising/lowering) – ideal for large components. ✅ Your benefits at a glance: Fully automated material flow For workpieces of any size and weight Reduced space requirements Minimal maintenance, maximum service life High energy efficiency Adaptable to your individual requirements This solution is perfect for modern coating processes where flexibility, ergonomics, and efficiency are paramount. Our experienced engineering teams will adapt the system precisely to your production requirements. 👉 Contact us for a customized solution or visit our website for more information.

Condition: new, ME-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from +45 ºC and above. EU-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from -30 ºC to +40 ºC. Rust is the adversary of freshly blasted steel; high air humidity combined with low steel temperatures creates ideal circumstances for moisture condensation onto the recently blasted surface. Condensation rust is a major cause of early coating failure. By lowering relative humidity, the Proton dehumidifiers are designed to give the best climatic conditions for blasting. Climate conditions across the world vary considerably from chilly and humid in Western Europe, warm and humid in the Far East, to hot and humid in the Middle East. Various types of technology can be employed in the dehumidification process; certain dehumidification technologies are more successful than others in dealing with specific climatic conditions. Each Proton dehumidifier is built to the highest quality standards and comes with regional certification. The heart of the humidifier is a very efficient and robust metal silicate rotor. The rotor contains a vast number of air channels, running parallel to the shaft, which ensures a large internal surface for adsorbing water vapour. The rotor is not affected by over saturation. Therefore, the PROTON dehumidifier’s rotor can resist long time storage at high humidity without loosing capacity. The PROTON dehumidifiers have been developed especially for corrossion protection in connection with sandblasting and painting operations to protect materials and to avoid moisture problems, meeting the following conditions: •Avaliable in sizes from 1.000m³/h to 18.000m³/h dry air. •Avaliable in pre-cooled and after-cooled versions for warm climates. •Robust design with steelframe, eyebolts etc. Bcsdpekw Ukuofx Afhsu •Vital parts can easily be maintained and exchanged. •Large air inlet grills and filters. •Can be built into containers for protection. •Adjustable dehumidifying capacity and outlet air temperature in 4Grades. •Outdoor and indoor use. •Dry air pressure up to 1200 Pa. Technical. Spec.: Dehumidifiers differs between 1.000m3/h - 18.000m3/h.PROTON Dehumidifiers decrease the Relative Humidity (RH) from 90% to %10-15. Dehumidifiers are capable to remove 100lt water per hour.

Condition: new, Product description: Bcodpfxsgha A Ss Afheu Casting, forging, pressing, heat treatment, finished product, semi-finished product, steel fabrication etc. It is preferred for surface cleaning, pre-coating preparation or revision works. Its distinct advantages are that it enables versatile sandblasting, and that large and small parts with irregular geometry can be sandblasted. With the help of the digital clock we use in our machines, the sandblasting time can be adjusted according to the part type and desired sandblasting surface. Casting sandblasting, forging sandblasting, press - heat treatment workpieces sandblasting, finished product sandblasting, semi-finished sandblasting, steel fabrication sandblasting, etc. used in transactions. The machine is designed and manufactured according to the size, weight and daily number of the parts to be sandblasted. It can be designed as a continuous system upon request and can be included in the paint line.

Condition: new, Step By Step Wet Painting Systems Elboy Industrial Solutions designs and manufactures full range of paint shops for your product. Bcedpfx Ajdy Dw Asfhju With ELBOY, you can navigate through your facility with virtual reality in the design phase, enabling you to make the desired changes in the design phase and not to encounter the surprise results. It provides designing and manufacturing services for your application by paying special attention to environmental pollution and work safety issues for the processes of Sandblasting, Putty, Washing, Undercoat and Finishing Coat for all sizes of products. Step by Step are systems with overhead conveyor or floor conveyors which can be designed for all sizes of product. Booths of Sandblasting, Chemical Washing, Pre-coat, Drying, Putty , Top Coat and Baking can be integrated into the system. In order to respectively carry out the processes determined by the system step by step, the automatic doors are opened at the end of the time period and the product automatically proceeds to the next process line. These fully automated systems are controlled via a 15” touch screen and provide various reporting methods such as main computer monitoring, product reporting and score reporting upon the demand and provide remote control. These are the paint shops where your product is designed and manufactured by our engineers in line with your capacity, use area and other demands. Maximum efficiency is aimed to be provided with minimum staff and the least space usage at electrostatic powder coating or wet paint, sandblasting, varnishing, coating, washing and similar system requirements.

Condition: new, Automatic sheet metal & profile shot blasting machine It is preferred for surface cleaning works of products such as sheet metal, NPI, NPU, angle, profile etc. The parts to be sandblasted move with the help of roller conveyors located at the entrance and exit of the machine. Turbines are placed in the machine body at appropriate angles so that the part surface can be sandblasted from the bottom and top. Its distinct advantages are that the products can be sandblasted quickly in length, semi-finished and finished products that can move on the roller conveyor, and the conveyor system. Bcsdpfx Afsghaywehsu The digital speed control we use in our machines can be adjusted for each loading according to the piece type and the desired sandblasting surface. The machine is designed and manufactured according to the size, weight and daily number of the parts to be sandblasted. Conveyor lengths can be lengthened or shortened upon request.

Condition: new, Year of construction: 2025, ‼️ NEW! FROM NOW ON: PALLET FORK COMBINED WITH BALE SPEAR WITH 2 TINES ‼️ ✅ NATIONWIDE DELIVERY INCLUDED (Delivery is free for you, not just possible! Compare! We operate our own trucks and cooperate with a reputable haulage company!) ✅ 7-year warranty* ✅ Nationwide service* ✅ We have skilled professionals and an in-house workshop (many sell directly from their backyard or under tents. Visit us and see where you buy! For more transparency, check out the 'News' section on our website!) ✅ Our wheel loaders are sandblasted after welding, primed with rust protection, and then finished with a thick paint coat! Almost never found in Chinese wheel loaders! Compare and ask questions! Best to get this confirmed in writing! ✅ Standardized hydraulic Euro hitch, not just any quick coupler! See for yourself at our premises! ✅ Spare parts warehouse! Located here in Gemmrigheim! 98% of all parts in stock! ✅ NEW LIFTING CAPACITY approx. 1200 kg! Continuous development and upgrades on our wheel loaders! ✅ We operate our own manufacturing plant in China! ‼️ NATIONWIDE DELIVERY INCLUDED ‼️ ‼️ IN STOCK – CAN BE VIEWED ON SITE ‼️ Despite a low height of approx. 2.20m, it features a tipping height of approx. 2.85m at the lower edge of the bucket‼️ ❗️OUR COMPONENTS – THAT’S WHAT SETS US APART❗️ ➡️ Ongoing quality controls throughout the manufacturing process ensure outstanding quality. ➡️ Thanks to our know-how and skilled technicians, we offer quick and uncomplicated support—even after the warranty period—throughout Germany and even Europe. ➡️ Our wheel loaders are deliberately designed to be straightforward and robust without unnecessary extras! Height: approx. 2.20m Lifting capacity: approx. 1200 kg, low clearance height and yet a full cab with heater—a rare combination especially at this price point. Years of Josan experience—continuous improvement and robust quality like in the old days. No frills and unbeatable prices. Josan S21 Wheel Loader Net weight: only approx. 2200 kg; can be loaded onto a trailer and driven away Lifting capacity: approx. 1200 kg Dimensions: approx. L4200 H2200mm W1600mm All-wheel drive Articulated steering ➡️ Cab width: approx. 1.25m ➡️ Total height: approx. 2.20m ➡️ Cab interior height: approx. 1.35m ▶️ Tipping height: approx. 2.85m ➡️ Cab interior width: approx. 1.10m—compare for yourself‼️ ➡️ Adjustable steering column ➡️ Superb all-round visibility ➡️ New: spacious comfort cab ➡️ Bucket ➡️ Hydraulic oil cooler ➡️ UVV (German accident insurance regulation) NEW for 1 year ➡️ Safety belt ➡️ Heated cab with blower ➡️ Extra fan for hot summer days (both doors can be opened) ▶️ Additional control for adjustable tipping speed of bucket/fork ➡️ Automatic hi/lo gear selection ▶️ 2-stage torque converter, electrically controlled ➡️ Electric joystick for forward/reverse driving, thumb control ➡️ Wide tires 31/15.5/15 agricultural tread (note: pictures show narrow tires) ➡️ 3rd and 4th hydraulic circuit with separate small joysticks ➡️ Float function Bedpoufwyzefx Afhocu ▶️ Delivery to your site Optional: ▶️ Combined pallet fork with carrier and spears! Note: we offer 1.20m tines and two spears (spears are 90cm long) ➡️ Euro hitch with hydraulic safety pins Net price 12,499.00€ +19% VAT: 2,374.81€ Gross: 14,873.81€ Subject to errors and changes. Images/text may differ. *Please inquire for full warranty details

Condition: refurbished (used), Year of construction: 2020, operating hours: 310 h, functionality: fully functional, working width: 900 mm, area performance: 5,700 m²/h, overall weight: 957 kg, water tank capacity: 150 l, battery voltage: 36 V, The Kärcher B150R D90 Dose was manufactured in 2020 and has only 310 operating hours. We have completely overhauled the machine, with each component being cleaned and checked for proper function. The drive motor has been fitted with a new drive pad. The suction bar, base plate, and bumper protection have been sandblasted and newly powder-coated in our facility. For optimal suction results, new rubber squeegees have been installed on the suction bar. The machine features six new maintenance-free gel batteries, which can be conveniently charged via the integrated charger. Additionally, the Kärcher B150 R is equipped with a detergent dosing system that meters and supplies the cleaning solution during operation. The Kärcher B150 R is ideal for medium to large areas such as logistics halls, workshops, or underground car parks. Bcjdpfx Afsx Iriyjhsu Technical data: Working width: 90 cm Fresh water tank: 150 liters Suction width: 118 cm Weight: 957 kg

Condition: new, mileage: 1 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 14.00 R 20, axle configuration: 6x6, wheelbase: 5,100 mm, fuel: diesel, fuel tank capacity: 390 l, driver cabin: day cab, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: steel, Year of construction: 2025, Equipment: ABS, air conditioning, - Radio/cassette player - Spare wheel - Sun visor flap - Power take-off (PTO) Mercedes-Benz Arocs 3340A 6x6 Cargo The Mercedes-Benz Arocs 3340A 6x6 Cargo is a robust truck, ideal for personnel and cargo transport in challenging conditions. Its 394 HP engine and 6x6 all-wheel drive deliver outstanding performance in difficult terrain. The versatile cargo bed with foldable benches and twistlocks is perfectly suited for troop movement or container logistics. This vehicle provides dependable reliability for demanding off-road operations and deployments. Technical data Mercedes-Benz Arocs 3340A 6x6: - Drive: 6x6 configuration for maximum off-road traction. - Permissible gross vehicle weight (GVW): 27 tonnes, suitable for heavy-duty transport. - Axle configuration: Front axle 8.0 t, rear axles 2 x 13.0 t with differential locks. - Suspension: Reinforced 3-leaf parabolic spring on front axle (8.0 t) and rear axles (2 x 13.0 t). - Wheelbase: 5,100 mm for stability and maneuverability. - Engine: 12.8-litre inline 6-cylinder OM460 Euro III, 394 HP (290 kW), 1,900 Nm. - Transmission: Mercedes PowerShift 3 with off-road mode and distribution gearbox VG 3000-3W. Bedpfx Afexnbwwshscu - Tyres: 365/85 R 20, optimised for off-road use. Cargo bed features: - Dimensions: length 7,000 mm, width 2,550 mm, internal height 2,000 mm. - Floor: Anti-slip checker plate steel floor (3/5 mm, S235JR) with 10 lashing eyes. - Side walls: Foldable, removable side walls and tailgate, optionally usable as flatrack. - Twistlocks: 4 units for ISO 20-foot containers. - Benches: Foldable benches for 30 persons, 415 mm per seat. - Roof and tarpaulin: Steel hoops with waterproof PVC tarpaulin (630 g/m², UV-resistant), colour to RAL white. - Extras: Foldable access steps, rubber buffers, spray protection with stone guard. Included accessories: - Lockable toolbox attached to chassis. - Holders for water and fuel canisters. - Spare wheel carrier with manual cable winch. Paintwork: - Epoxy primer, sandblasting (SA 2½), wax sealant, RAL shade white. Outstanding performance: - Versatility: Flexible for personnel, freight, or container transport. - Robustness: Solid steel construction for off-road deployment. - Efficiency: Quick adaptation of the cargo bed without tools. - Reliability: Reinforced suspension and powerful engine. Areas of operation: - Military: Personnel and equipment logistics. - Logistics: Transport in remote areas. - Container logistics: ISO 20-foot container transport. Additional options: - Lockable fuel caps, tank underride protection. - LED lighting, first-aid kit, warning triangle, 6-kg fire extinguisher. Powerful in the toughest conditions: The Mercedes-Benz Arocs 3340A 6x6 Cargo excels in rough terrain and challenging logistics missions — the ideal solution for heavy-duty transport tasks. Availability: 4 units available from September 2025. Images will be updated upon arrival. Contact: or General information Year of manufacture: 2025 Technical information Number of cylinders: 6 Engine displacement: 12,800 cc GVW: 27,000 kg Transmission Gearbox: PowerShift 3, 16-speed, automatic...

Condition: new, mileage: 1 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 14.00 R 20, axle configuration: 6x6, wheelbase: 5,100 mm, fuel: diesel, fuel tank capacity: 390 l, driver cabin: day cab, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: steel, Year of construction: 2025, Equipment: ABS, air conditioning, - Radio/cassette player - Spare wheel - Sun visor flap - Power take-off (PTO) Mercedes-Benz Arocs 3340A 6x6 Cargo The Mercedes-Benz Arocs 3340A 6x6 Cargo is a robust truck, ideal for personnel and cargo transport in challenging conditions. Its 394 HP engine and 6x6 all-wheel drive deliver outstanding performance in difficult terrain. The versatile cargo bed with foldable benches and twistlocks is perfectly suited for troop movement or container logistics. This vehicle provides dependable reliability for demanding off-road operations and deployments. Technical data Mercedes-Benz Arocs 3340A 6x6: - Drive: 6x6 configuration for maximum off-road traction. - Permissible gross vehicle weight (GVW): 27 tonnes, suitable for heavy-duty transport. - Axle configuration: Front axle 8.0 t, rear axles 2 x 13.0 t with differential locks. - Suspension: Reinforced 3-leaf parabolic spring on front axle (8.0 t) and rear axles (2 x 13.0 t). - Wheelbase: 5,100 mm for stability and maneuverability. - Engine: 12.8-litre inline 6-cylinder OM460 Euro III, 394 HP (290 kW), 1,900 Nm. - Transmission: Mercedes PowerShift 3 with off-road mode and distribution gearbox VG 3000-3W. - Tyres: 365/85 R 20, optimised for off-road use. Cargo bed features: - Dimensions: length 7,000 mm, width 2,550 mm, internal height 2,000 mm. - Floor: Anti-slip checker plate steel floor (3/5 mm, S235JR) with 10 lashing eyes. - Side walls: Foldable, removable side walls and tailgate, optionally usable as flatrack. - Twistlocks: 4 units for ISO 20-foot containers. - Benches: Foldable benches for 30 persons, 415 mm per seat. Bcedexnbwdepfx Afhju - Roof and tarpaulin: Steel hoops with waterproof PVC tarpaulin (630 g/m², UV-resistant), colour to RAL white. - Extras: Foldable access steps, rubber buffers, spray protection with stone guard. Included accessories: - Lockable toolbox attached to chassis. - Holders for water and fuel canisters. - Spare wheel carrier with manual cable winch. Paintwork: - Epoxy primer, sandblasting (SA 2½), wax sealant, RAL shade white. Outstanding performance: - Versatility: Flexible for personnel, freight, or container transport. - Robustness: Solid steel construction for off-road deployment. - Efficiency: Quick adaptation of the cargo bed without tools. - Reliability: Reinforced suspension and powerful engine. Areas of operation: - Military: Personnel and equipment logistics. - Logistics: Transport in remote areas. - Container logistics: ISO 20-foot container transport. Additional options: - Lockable fuel caps, tank underride protection. - LED lighting, first-aid kit, warning triangle, 6-kg fire extinguisher. Powerful in the toughest conditions: The Mercedes-Benz Arocs 3340A 6x6 Cargo excels in rough terrain and challenging logistics missions — the ideal solution for heavy-duty transport tasks. Availability: 4 units available from September 2025. Images will be updated upon arrival. Contact: or General information Year of manufacture: 2025 Technical information Number of cylinders: 6 Engine displacement: 12,800 cc GVW: 27,000 kg Transmission Gearbox: PowerShift 3, 16-speed, automatic...

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. Bjdpfx Aowv Tzaefhocu • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on

Condition: used, Year of construction: 2008, filter area: 72 m², suction capacity: 5,000 m³/h, Dust extraction, smoke extraction, external self-cleaning filter from the renowned brand NEDERMAN. Filtration ventilation suitable for plasma, laser cutting, sandblasting, soda blasting, gypsum, cement, brick, plastics, and various types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Upon customer request, new filter cartridges can be ordered, tailored to the intended application. Model: FilterMax DFIL 40 Fan in a soundproof enclosure, 5.5 kW power. Capacity: 5000 m3/h Bedpfew Dza Tsx Afhecu Filtration area: 72 m2 Stock No.: 1017

Year of construction: 2025, condition: new, ASK - 0 Hanger Type Shot Blasting Machine; It is used for polishing sheet and metal parts which have come out of press and heat treatment, cleaning and roughening of castings, preparation before paint and rubber coating, taking forging parts to canvases and revision of old parts. (Quantity x Diameter): Ø: 800 H: 700 has 2 turbine x Ø 325mm with 6 blades The cabin is made of ST-37 sheet metal and the hot pot area is supported by Brinell or Manganese wear plate. The interior of the cabinet is covered with a rubber sheet to prevent it from being exposed to abrasion due to the sandblasting process. Rubber sheets are fixed to the cabinet with moldings. (Coating with a complete manganese armor is optionally offered to our customers.) The wear plate cladding is screw-in design for future wear-based replacements. It can be easily changed by authorized personnel in your company. Although the cabin door can be pneumatic or manual, it is designed as a winged system and 2 pieces. The cabinet door has a lock system to prevent it from being opened during the blasting process. Bjdevkf Agepfx Afhecu In addition, there is a sensor or switch on the cabinet that stops sandblasting when the door is open. The system consisting of rail line, suspension gear system and crane (optional) is designed to allow the material to be sanded to move easily inside the machine. Full automation panel is available. Panel materials are Siemens / Schineider brand. Machine control is provided with a 10” PLC screen.