Used Sandblaster for sale (330)

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, overall weight: 8,000 kg, inner dimension height: 600 mm, workpiece weight (max.): 20 kg, turntable diameter: 400 mm, The described shot blasting machine is designed for the automatic blasting or peening with selected media shots in accordance to the final finishing result to achieve. Part to be blasted will be positioned on suitable pieces’ holders that minimized the shadowing of the contact areas parts/jigs. The parts are inserted and extracted by an automatic cycle into the blasting/peening zones, by means of a step-by-step conveyor that can also operate in continuous mode. The parts, after passing through a neutral zone, are blasted / peened in the subsequent zones, prior unloading the parts are also blown. The system is equipped with one (1) loading/unloading position to allow easier loading/unloading during the process cycle Once the piece has been loaded with operator or automation, the cycle starts and the conveyor process a step forward, allows the newly loaded piece to enter the cabin and the simultaneous arrival of an already processed part at the unloading station. The machine works with masked times, therefore all the positions of the satellites equipping the conveyor are occupied in the cycle time, when fully operational. Bcjdpfx Afewdgrzoheu In the inner positions of the cabin the satellites rotate, and the shooting guns jets the blasting/peening media with a correct impact angle as from appropiate design.

Condition: good (used), Sandblasting Unit MHG SMG 45K - Working chamber 1000x600x750 mm - Work gloves Bedpow Tc Hljfx Afhecu - Two side doors, dust-tight sealing - Double-walled, sound-insulated with foam - On/Off extraction and lighting - Pressure regulator, pressure gauge, and foot switch - Viewing window Dimensions: LxWxH 1.5x1.5x1.8 m / Weight 380 kg Errors and omissions excepted.

Condition: used, Year of construction: 2012, machine/vehicle number: DHT 05-15-3.6-08-07,5, Machine no.: 181174 Manufacturer: AGTOS Bcsdporq Hd Ssfx Afheu Type: Continuous overhead conveyor blast machine Designation: DHT 05-15-3.6-08-07,5 Turbines: 8 turbines with 7.5 kW Extraction air volume: 7500 m³/h Year of construction: 2012 Other details: Characteristics of the installed filter system Residual dust content with secondary filter: ≤ 2 mg/Nm³ Type: Dry dedusting system Characteristics of the blasting system Blasting media (material and size): Steel abrasive Abrasive quantity (initial filling): 5 tons Workpiece material: Steel Max. Workpiece length: 1400 mm Passage width: 500 mm Passage height: 1500 mm Sound pressure level without sound insulation: ≤ 85 dB(A

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 181199, Machine no.: 181199 Manufacturer: AGTOS Type: Barrel blasting machine Designation: TS 150-3.6-01-15,0 Turbines: 1 turbine with 15.0 kW Extraction air volume: 3000 m³/h Bcedpfx Afsrq Hmzohsu Max. batch weight: approx. 1000 kg Type: Sinter-plate filter Other details Characteristics of the installed filter system Residual dust content: ≤ 1 mg/Nm³ Characteristics of the blasting system Blasting media (material and size): Wire grain Blasting media quantity (initial filling): approx. 1000 kg Workpiece temperature: max. 80°C Drum length: 900 mm Drum diameter: 800 mm Max. Drum load: 250 kg Max. Single piece weight: 5 kg Capacity: 150 liters Max. Feeder lifting capacity: 480 kg Sound pressure level without sound insulation: ≤ 85 dB(A)

Condition: used, Year of construction: 2014, operating hours: 20,600 h, functionality: fully functional, Characteristics of the blasting machine Blasting purpose: Cleaning, deburring Abrasive (material and size): Steel abrasive Abrasive quantity (first filling): 3 t Bodpfxjw Slmrs Afhjcu Workpiece material: Steel Workpiece temperature: Ambient temperature Conveying speed: 0.5 – 2.5 m/min Conveying width: 1,000 mm Conveying height: 500 mm Sound pressure level without noise insulation: > 85 dB(A)

Condition: excellent (used), functionality: fully functional, Satellite blasting system from Nicolis; 6 satellites with rotary motion; horizontal up/down motion with up to 6 nozzles, individually switchable; Maximum component size: height 320 mm, width 230 mm. System was used only for demonstration and testing purposes and is being sold due to disuse. Delivery/customs clearance available upon request. Bsdpfxewbhb Se Afhecu Inspection and test run available upon request.

Condition: new, Technical specification: - Chamber volume: 990 litres - Power supply: 230V ~ / 50Hz - Nominal operating pressure: up to 10 bar Bcjdsft Srcepfx Afhou - Cleaning capacity: up to 15 m2 / h - Cleaning degree: SA-2.0 (deep and extensive corrosion) - Air requirement: 3500 l / min (for 4.0 mm nozzle) - Maximum air flow: up to 12,500 l / min - Supported nozzle diameters: from 4 to 10 mm - Grinding valve vacuum BRAGO - Gun: vacuum CTR - Working area dimensions: 1 600 x 870 x 730 mm - Sight glass dimensions: 305 x 610 mm - Work table load: up to 250 kg - Illumination: LED, adjustable in a range of +/- 90 degrees (two parts) - Coating protection: powder coating - Working temperature: 10 to + 50 degrees Celsius - Inspection valve: Yes - In the picture an example of the configuration of the SCI-800-10 FA The offer includes: - Land Reko SCI-800-10 FA Chamber Cleaner Automatic. - Boron carbide nozzles 8 pcs. Big choice between 4 mm and 10 mm - Pneumatic connections - Control panel with inverter system - Roller conveyor with automatic drive 1,5 Lm x 2 - Working pressure control system for sprinkler sections - Automatic sprinkler and grinding valve x 8 - Workpiece blowing system after processing - CE Declaration of Conformity - User manual in German language - 24 months warranty for consumers - 24 months warranty for contractors - Free delivery - Device also available in leasing or financing - Device on order. Delivery time 8 weeks from order

Condition: new, Technical specification: - Chamber volume: 1600 liters - Power supply: 230V ~ / 50Hz - Nominal operating pressure: up to 10 bar - Cleaning capacity: up to 23 m2 / h - Cleaning degree: SA-2.0 (deep and extensive corrosion) - Air consumption: 500 l / min (for 4.0 mm nozzle) - Maximum air flow: up to 2,300 l / min - Supported nozzle diameters: from 4 to 10 mm - Grinding valve: 2 x vacuum BRAGO - Gun: vacuum CTR x 2 - Working area dimensions: 1 500 x 1340 x 720 mm - dimensions of sight glass: 305 x 610 mm Bjdjft Sqxspfx Afhocu - Working table load: up to 600 kg - Lighting: LED, adjustable in the range of +/- 90 degrees (two parts) - Coating protection: powder coating - Working temperature: 10 to + 50 degrees Celsius - Common work table: Yes - Inspection valve: Yes - Weight: 720 kg The offer includes: - Land Reko SCI-1600-10 chamber cleaner -Transport cart - turntable - Boron carbide nozzle: 4, 5, 6, 7, 8, 9 or 10 mm (optional) - Protection leather gloves - Holder for hanging details - Foot control pedal x 2 - Pneumatic connection - CE Declaration of Conformity - User manual in German language - 24 months warranty for consumers - 24 months warranty for contractors

Condition: new, Technical specification: - chamber volume: 1300 litres - Power supply: 230V ~ / 50Hz - Nominal working pressure: up to 10 bar - Cleaning capacity: up to 20 m2 / h - Degree of cleaning: SA-2.0 (deep and extensive corrosion) - Air requirement: 500 l / min (for 4.0 mm nozzle) - Maximum air flow: up to 2,300 l / min - Supported nozzle diameters: from 4 to 10 mm - Grinding valve: Vacuum-BRAGO - Pistol: Vacuum CTR x 2 - Dimensions of the working area: 1 200 x 1240 x 700 mm - Sight glass dimensions: 305 x 610 mm - Work table load: up to 300 kg - Lighting: LED, adjustable in a range of +/- 90 degrees (two parts) - Coating protection: Powder coating - Working temperature: 10 to + 50 degrees Celsius - Shared work table: Yes - Inspection valve: Yes - Weight: 350 kg The offer includes: - Land Reko SCI-1300-10 Chamber cleaner - Boron carbide nozzle: 4, 5, 6, 7, 8, 9 or 10 mm (optional) - Protection leather gloves - Holder for hanging details - Foot control pedal x 3 Bcedpfx Afoft Sqqshju - Pneumatic connection - CE Declaration of Conformity - User manual in German language - 24 months warranty for consumers - 24 months guarantee for entrepreneurs

Condition: new, Technical specification: - Chamber volume: 990 litres - Power supply: 230V ~ / 50Hz - Nominal working pressure: up to 10 bar - Cleaning capacity: up to 15 m2 / h - Degree of cleaning: SA-2.0 (deep and extensive corrosion) - Air requirement: 500 l / min (for 4.0 mm nozzle) - Maximum air flow: up to 1,500 l / min - Supported nozzle diameters: from 4 to 10 mm - Grinding valve vacuum BRAGO - Pistol: Vacuum CTR - Dimensions of the working area: 1 600 x 870 x 730 mm - Sight glass dimensions: 305 x 610 mm Bcjdpfjft Sq Hex Afhou - Work table load: up to 250 kg - Lighting: LED, adjustable in a range of +/- 90 degrees (two parts) - Coating protection: Powder coating - Working temperature: 10 to + 50 degrees Celsius - Inspection valve: Yes - The picture shows an example for the configuration of the SCI-800-10 SA The offer includes: - Land Reko SCI-800-10 SA Chamber cleaner semi-automatic - Boron carbide nozzles 8 pcs. Large at choice between 4 mm and 10 mm - Pneumatic connections - Working pressure control system for sprinkler sections - Roller conveyor with manual drive 1,5 lm x 2 - Automatic sprinkler and grinding valve x 8 - Workpiece blowing system after processing - CE Declaration of Conformity - User manual in German language - 24 months warranty for consumers - 24 months guarantee for entrepreneurs - Free delivery - Device also available in leasing or financing - Unit On order. Delivery time 8 weeks from order.

Condition: new, Technical specification: - Chamber volume: 690 liters - power supply: 230V ~ / 50Hz - power of dedusting system: 1 200 watt - Nominal operating pressure: up to 10 bar - Cleaning capacity: up to 13 m2 / h - Cleaning degree: SA-2.0 (deep and extensive corrosion) - Air demand: 500 l / min (for 4.0 mm nozzle) - Maximum air flow: up to 1,500 l / min - Supported nozzle diameters: from 4 to 10 mm - Grinding valve: vacuum BRAGO - Gun: vacuum CTR - Working area dimensions: 1 150x710x850 mm - Sight glass dimensions: 305x610 mm - Working table load: up to 250 kg - Lighting: LED, adjustable in the range of +/- 90 degrees (two parts) - coating protection: powder coating - Working temperature: - 10 to + 50 degrees Celsius - Common work table: Yes - Inspection valve: Yes - Weight: 195 kg Bjdpfoft Sqbsx Afhjcu The offer includes: - Land Reko SCI-690-10 chamber cleaner. - Dust removal system of the OP-1200 - Boron carbide nozzle: 4, 5, 6, 7, 8, 9 or 10 mm (optional) - Protection leather gloves - Holder for hanging details - Foot control pedal - Pnematic connection - CE Declaration of Conformity - User manual in German language - 24 months warranty for consumers - 24 months warranty for entrepreneurs

Condition: new, Technical specification: - Chamber volume: 420 litres - Power supply: 230V ~ / 50Hz - Dedusting system power: 1 200 Watt - Nominal working pressure: 10 to - Cleaning capacity: up to with 10 m2 / h - Degree of cleaning: SA-2.0 (deep and extensive corrosion) - Air requirement: 500 l / min (for 4.0 mm nozzle) - Maximum air flow: up to 1,500 l / min - Supported nozzle diameters: from 4 to 10 mm - Grinding valve: Vacuum-BRAGO - Pistol: Vacuum CTR - Working area dimensions: 820x620x750 mm - Sight glass dimensions: 305x610 mm - Work table load: up to with 250 kg - Lighting: LED, adjustable in a range of +/- 90 degrees - Coating protection: Powder coating - Working temperature: - 10 to + 50 degrees Celsius - Shared work table: Yes - Inspection valve: Yes - Weight: 170 kg The offer includes: - Land Reko SCI-420-10 Chamber cleaner - Dust extraction system of the OP-1200 - Boron carbide nozzle: 4, 5, 6, 7, 8, 9 or 10 mm (optional) - Protection leather gloves - Holder for hanging details - Pnematic connection Bcsdjft Sp Nopfx Afheu - CE Declaration of Conformity - User manual in German language - 24 months warranty for consumers - 24 months guarantee for entrepreneurs - Device also available in leasing or financing

Condition: new, Technical specification: - chamber volume: 990 litres - Power supply: 230V ~ / 50Hz - Dedusting system power: 1 200 Watt - Nominal working pressure: up to 10 bar - Cleaning capacity: up to 15 m2 / h - Degree of cleaning: SA-2.0 (deep and extensive corrosion) - Air requirement: 500 l / min (for 4.0 mm nozzle) - Maximum air flow: up to 1,500 l / min - Supported nozzle diameters: from 4 to 10 mm - Grinding valve: Vacuum-BRAGO - Pistol: Vacuum CTR - Dimensions of the working area: 1 600 x 870 x 730 mm - Sight glass dimensions: 305 x 610 mm - Work table load: up to 250 kg - Lighting: LED, adjustable in a range of +/- 90 degrees (two parts) - Coating protection: Powder coating - Working temperature: - 10 to + 50 degrees Celsius - Shared work table: Yes - Inspection valve: Yes - Weight: 250 kg The offer includes: - Land Reko SCI-990-10 Chamber cleaner - Dust extraction system of the OP-1200 - Boron carbide nozzle: 4, 5, 6, 7, 8, 9 or 10 mm (optional) - Protection leather gloves - Holder for hanging details - Foot control pedal - Pnematic connection - CE Declaration of Conformity - User manual in German language - 24 months warranty for consumers - 24 months guarantee for entrepreneurs Bjdoft Sqmopfx Afhecu

Year of construction: 2025, condition: new, functionality: fully functional, Hopper capacity: 30l / 150 kg Cleaning degree: SA-3.0 (deep and extensive corrosion) Air demand: 1,000 l/min (for 4.0 mm nozzle) Abrasive valve: FSV Premium Bsdswry R Tspfx Afhscu Nominal operating pressure: 13 bar Working temperature: -20 - 100 °C Cleaning performance: up to 16 m2/h Supported nozzle diameters: from 2 to 15 mm Weight: 45 kg The SBM series compressed air blasting systems are mobile machines designed for advanced surface treatment using a compressed air jet and abrasive grains. The beneficial conical bottom design facilitates abrasive movement and the possibility to use different valve designs makes the abrasives suitable for processing all types of abrasives with spherical, round and/or sharp-edged shapes and any grain size. The blasting systems of the SBM series can achieve a surface finish up to class SA-3/SP5 and a capacity of up to 106 m2/h. The sandblasters of the SBM series are equipped with large claw couplings, which ensure quick and safe connection while maintaining high compressed air throughput. The abrasive loading is carried out by a pneumatically operated rubber membrane - without the need for inefficient screw connections - making the SBM series blasting systems safer and easier to operate. The blasting unit is also equipped with a large inspection valve, enabling quick emptying of the tank and the possibility of internal inspection. The blasting machines of the SBM series allow simultaneous operation with one or two working nozzles (depending on the model). The control of the blasting device (in pneumatic or electric version) is intuitive and precise and therefore efficient, as the control handle is located at the end of the working line. The undeniable advantage of this solution is that the operator performing the cleaning directly can interrupt the operation of the machine, as required by the latest health and safety regulations (solution available as an additional option). The SBM blasting unit container was designed and manufactured in accordance with the requirements of the Pressure Equipment Directive 2014/68/EU based on and under the supervision of a design approved by a notified body, and is CE-marked.

Year of construction: 2025, condition: new, functionality: fully functional, Hopper capacity: 60l / 300 kg Degree of cleanliness: SA-3.0 (deep and extensive corrosion) Air requirement: 1,000 l/min (for 4.0 mm nozzle) Abrasive valve: FSV Premium Nominal operating pressure: 13 bar Operating temperature: -20 - 100 °C Cleaning performance: up to 19 m2/h Supported nozzle diameters: from 2 to 15 mm Weight: 65 kg The SBM series compressed air blasting machines are mobile devices designed for advanced surface treatment using a stream of compressed air and abrasive media. Thanks to the advantageous conical bottom design to facilitate abrasive movement and the possibility of using various valve types, the machine is suitable for processing all types of abrasives with spherical, rounded, and/or angular shapes and any grain size. Bcodpfewrza Njx Afhsu The SBM series blasting systems can achieve a surface finish up to class SA-3/SP5 and a capacity of up to 106 m2/h. The sandblasters of the SBM series are equipped with large claw couplings, ensuring quick and secure connections while allowing high compressed air throughput. The abrasive loading is performed by a pneumatically operated rubber membrane—without the need for inefficient screw connections—which makes the SBM series blasting systems safer and easier to use. The blasting unit is also equipped with a large inspection valve that enables quick tank discharge and allows for internal inspection. The SBM series blasting units allow for simultaneous operation with one or two working nozzles (depending on the model). The control of the blasting unit (in pneumatic or electric version) is intuitive and precise and therefore efficient, as the control handle is located at the end of the working line. The undeniable advantage of this solution is that the operator performing the cleaning can interrupt the operation of the machine directly, as required by the latest health and safety regulations (solution available as an optional extra). The SBM blasting unit container was designed and manufactured according to the requirements of the Pressure Equipment Directive 2014/68/EU based on and under the supervision of a design approved by a notified body, and is CE marked.

Year of construction: 2025, condition: new, functionality: fully functional, Hopper capacity: 90l / 450 kg Degree of cleaning: SA-3.0 (deep and widespread corrosion) Air requirement: 1,000 l/min (for 4.0 mm nozzle) Abrasive valve: FSV Premium Nominal operating pressure: 13 bar Operating temperature: -20 - 100 °C Cleaning performance: up to 22 m2/h Supported nozzle diameters: from 2 to 15 mm Weight: 110 kg The compressed air blasting machines of the SBM series are mobile machines designed for advanced surface treatment with compressed air jets and abrasive media grains. The advantageous conical bottom design facilitates abrasive movement and, combined with the option to use various valve types, makes the abrasives suitable for processing all types of abrasives with spherical, round, and/or angular shapes and any grain size. The blasting units of the SBM series can achieve a surface quality up to class SA-3/SP5 and a capacity of up to 106 m2/h. SBM series sandblasters are equipped with large claw couplings, ensuring quick and safe connections while maintaining high compressed air throughput. The abrasive is loaded via a pneumatically operated rubber membrane - eliminating the need for inefficient screw connections - which makes the SBM series blasting units safer and easier to operate. The blasting device is also equipped with a large inspection valve that allows for quick tank emptying and the possibility of internal inspection. The SBM series blasting machines allow simultaneous operation with one or two working nozzles (depending on the model). The control of the blasting device (in pneumatic or electric versions) is intuitive and precise, making it efficient, as the control handle is located at the end of the working line. The undeniable advantage of this solution is that the operator performing the cleaning can interrupt the operation of the machine directly, as required by the latest health and safety regulations (solution available as an additional option). Bedpjwrzbgofx Afhocu The tank of the SBM blasting unit has been designed and manufactured in accordance with the requirements of the Pressure Equipment Directive 2014/68/EU, based on and under the supervision of a design approved by a notified body, and is CE-marked.

Condition: new, Year of construction: 2024, functionality: fully functional, SY-ZP4A Rotary disc precision sand Bcjdpfx Aowcfvpsfhju Dry blasting machine year 2024

Condition: new, Year of construction: 2026, Desciption in english language after demand. Bcsdpfsdulhvjx Afhou

Condition: used, Year of construction: 2012, type of input current: three-phase, filter area: 62 m², suction capacity: 2,500 m³/h, negative pressure: 9,000 Pa, Dust extractor, welding fume extractor, self-cleaning pneumatic filter, vacuum dust collector, absorber for plasma, laser, sandblasting, and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. Large filtration area requiring minimal space. Bcjdpfxjxrpmzs Afhsu High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters, it causes minimal pressure loss. Short bursts of compressed air during the filtration process provide effective filter cleaning. Fan power: 7.5 kW Capacity: 2,500 m³/h at a pressure of up to 9,000 Pa Filter cartridges: 11 pcs Filtration surface: 62 m² The device is equipped with an automatic system for impregnating cartridge filters. The extractor is designed for special applications where the filtered fumes and dust may be moist and sticky. Adding impregnating agent captures moisture from the fume, protecting the filters from clogging. In this case, the lifespan of the cartridge filters is increased. Stock number: 0981

Condition: new, Year of construction: 2026, functionality: fully functional, ### Double Workstations for Maximum Industrial Efficiency The NANXING ND712DTL is a high-performance industrial solution designed for six-sided drilling of wood-based panels. By integrating two independent workstations into a single compact footprint, this machine effectively doubles production efficiency while minimizing the required floor space. It is the ideal choice for high-volume furniture manufacturers looking for speed, precision, and reliability. ###Key Advantages & Technologies Dual Station Productivity: Features two independent workstations ( mm) with separate industrial computers and processing units, allowing for the simultaneous processing of two panels. Comprehensive 6-Sided Processing: Capable of drilling and routing on all six sides of a panel in a single cycle, eliminating manual handling errors. High-Rigidity Structure: The integrated machine body undergoes stress-relief tempering, vibration aging, and sandblasting to ensure long-term operational stability and precision. Advanced Control System: Powered by the SYNTEC CNC system and operating on Windows 10, delivering a processing speed that is 20%-25% faster than standard systems. Precision Engineering: The monolithic frame is manufactured in a single process using Japanese SNK equipment to guarantee high-precision alignment. ### Technical Specifications Panel Dimensions Length: 250 - 2,800 mm; Width: 250 - 650/1200 mm; Thickness: 10 - 60 mm | | Drilling Configuration | Top: 4 units (194 vertical); Bottom: 2 units (92 vertical) | | Main Spindles | 2 x 5.5 kW (ER25) + 2 x 3.5 kW (ISO30), max 18,000 rpm | | Max Travel Speed | X/U Axes: 135 m/min; Y Axis: 75 m/min; Z Axis: 30 m/min | | Tool Magazine | 8+8 position automatic tool changer for top electromandrels | | Total Power / Weight | 52.36 kW / 7,850 kg | ### Standard Features & Smart Functionalities Intelligent Panel Detection: Equipped with X-axis length detectors and Y-axis width compensation to ensure correct panel loading and prevent processing errors. Bsdpjygr T Ujfx Afhecu Specialty Hardware Support: Configured with specialized aggregates for Lamello grooves and "invisible" hardware connectors. Automatic Scanning: Integrated dual scanners ensure rapid reading of barcodes, even on long panels, to increase workflow automation. Surface Protection: Outfeed tables feature brushes and conveyor belts to protect delicate finished surfaces during movement. Enhanced Safety: A comprehensive safety fence with light barriers and safety doors ensures total operator protection. ### About the Manufacturer NANXING Machinery, established in 1996 and listed on the Shenzhen Stock Exchange, is a global leader in intelligent furniture manufacturing solutions. Known for innovative technology and meticulous quality control, Nanxing machines are certified to international CE standards.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Electric Motors Total Power: 2 x 45 = 90kW 2. Machine Weight: 12.000 kg 3. Shredding Capacity : 3 - 4 tons / h ( Aluminum profiles, barrels, fridge, etc steel thickness up to 3 mm and waste ) 4. Cutting blades are made of material HARDOX 500. Blade thickness is 6 cm and coated with HRC 60 hardfilled welding. Blades are easy to replace. 5. Loading Chamber Dimensions: 800 mm x 1200 mm 6. The walls will be covered with HARDOX 500 material. 7. Before painting, the whole machine body will be sandblasted. 8. Two cover undercoat and one cover paint will be applied. Bcodpfx Aegwcfzsfheu 9. The movement of the rotors is provided by an electric motor linked with a gearbox. 10. The rotors are moving independently of each other 11. The loading of the shredder can be done by grape or conveyors 12. In case of a jam between the rotor blades the machine turns the rotors in the opposite direction to remove the compression. 13. After the jam is solved the rotors return to their normal direction, If Jam is continuing the machine will stop with an acoustic warning. 14. A Hydraulic Oil cooling system is implemented. 15. Rotors are independent from each other and work at 18-20 rpm. 16. Hydraulic system components will be provided by PARKER or EATON-VICKERS & KAWASAKI brands. 17. All electrical parts will be SCHNEIDER and SIEMENS brands. 18. The machine is fully automatic with SIEMENS S7-1200 PLC control. 19. The machine is certified with ISO 9001 issued by URS, and CE issued by SGS. 20. Machine will be under AYMAS MAKINA San. Ve Tic. A. S. guarantees against manufacturing defects for one (1) year or two thousand five hundred (2.500) hours of operation.

Year of construction: 2024, condition: new, IMPORTANT: MACHINE WILL BE BRAND NEW All electric-electronic components used are Schneider and Siemens Brands. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for one (1) year or two thousand five hundred (2.500) operation hours, whichever comes first. The cylinder rods, especially “hard chrome plated” for resistance against any damage, are induction hardened to maintain maximum strength. The “Off-The-Shelf” equipment used in the electric and hydraulic systems are from reputable worldwide brands and comply with the CE European standards. The body of the machine is constructed from “DIN St52” material. After welding they are stress-relieved and sandblasted before painting. SEE THE TECHNICAL DESCRIPTION BELOW Electric Motors: 11 kW Machine Weight: appx 2.700 kg Cutting Speed: 5 cuts/min Blade Length: 620 mm Max. Working Pressure: 250 bars Bcedpfegv Ix Iex Afhou Cutting Force: 150 tons Machine Dimensions (Width x Length x Height): 750 mm x 2.500 mm x 1.300 mm

Condition: used, Year of construction: 2017, overall weight: 512 kg, total width: 1,400 mm, total length: 1,400 mm, total height: 2,660 mm, type of input current: three-phase, negative pressure: 4,600 Pa, filter area: 14 m², suction capacity: 2,655 m³/h, Dust extraction unit, RINGLER/Karcher Group brand, self-cleaning vacuum filter, extractor and dedusting system designed for efficient extraction of graphite, metallic, mineral dusts, hard fibers, flammable, hazardous, toxic substances, and for process dust collection during sandblasting, soda blasting, grinding, polishing, and all types of dry dust. The vacuum fan is positioned after the filter on the clean air side, minimizing the risk of explosion. Brand: Ringler / Karcher Group Bedpfx Ajxn Rgusfhecu Model: RE201 D5.5 IE3 Pocket filter cartridge – multi-pocket Fan power: 5.5 kW Capacity: 2655 m3/h Vacuum: 4600 Pa Filter surface: 14 m2 Inlet diameter: 180 mm / 125 mm Electromotorized filter cleaning Device in very good condition. Warehouse No.: 1051

Condition: used, Year of construction: 2009, type of input current: three-phase, overall weight: 200 kg, suction capacity: 2,000 m³/h, filter area: 10 m², negative pressure: 2,300 Pa, Equipment: documentation/manual, Dust extractor, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum for sandblasting, soda blasting, shot blasting and for all types of dry dust. Brand: Pionier Model: Entstauber PF-2B The filter is cleaned with compressed air pulses during operation, ensuring high device efficiency. Fan located on the clean side, minimizing explosion risk. Specifications: Capacity: 2000 m3/h Vacuum: 2300 Pa Filter surface area: 10 m2 Cartridge filter element. Motor power: 1.5 kW Inlet diameter: 180 mm HEPA filter, filtration class H13 Bcsdpfx Afjxnmw Njheu Year of manufacture: 2009 Stock number: 1057

Condition: new, power: 324 kW (440.52 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Internal customer enquiry number: 5-052 / Available immediately!!! MAN TGS 26.440 6x2H-4 BL 3-way tipper with FASSI F195A.2.24 E-DYNAMIC loading crane Loading crane: * FASSI F195A.2.24 e-dynamic * Lifting moment: 162 kNm (16.51 tm) * Hydraulic four-fold extension: 12.7 m * e-dynamic hose routing for 2 additional attachments * Slewing range: 400° * Double knuckle boom system with PROLINK (over-bending knuckle arm up to 15°) Bedpfx Afsxnnwkshecu * Electronic overload shut-off device with FX 500 * FASSI stability control FSC incl. LMB II * Fassi RCS radio remote control maxi – 6 functions with 3 joysticks (2-2-2) * Special outriggers, hydraulic outreach of 6.64 m incl. FSC * Outriggers operable via radio remote control * FL-System (Full Lift) engageable rapid feed valve for extensions * LED work lights Vehicle: * MAN D2676 LFAJ diesel engine, 324 kW (440 hp), 2,200 Nm torque, Euro 6e * MAN TipMatic 12.24 OD automatic transmission * 6x2H-4 MAN HydroDrive, hydrostatic driven front axle * Wheelbase: 3,600 + 1,350 mm * Leaf/air suspension * RINGFEDER 40mm trailer coupling, type 4040/G150A (alternatively with surcharge, 50mm diameter) * 2-line trailer brake couplings, DuoMatic coupling * Fuel tank capacity: 390 l, AdBlue tank capacity: 60 l * High-performance engine brake MAN Turbo EVBec, multi-stage * Differential lock on driven rear axle * Trailing axle, 9,000 kg, non-driven, straight, steered, liftable * Prepared for 2 cameras, one camera coupled to reverse gear * NN cab: the practical cab (narrow, medium-length, standard height) * Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment, and seat heating * Electric sun roller blind for windscreen, interior * Coolbox * MAN EasyControl operating panel, 4 functions, can be operated from outside when the door is open * MAN Media System Navigation Professional 12.3 inch * MAN Advanced sound system Superstructure: 3-way tipper body with FASSI F195A.2.24 E-DYNAMIC crane mounted directly behind the cab (crane with top features: radio remote control, hydraulic outriggers with wireless operation, work lights, etc.) Flatbed: * Dimensions (LxWxH): 4,800 mm x 2,420 mm x 800 mm * (Alternative also available: loading length 5,200 mm x 2,420 mm x 800 mm) * Headboard height: 1,000 mm Subframe: Robust steel welded construction with two longitudinal members and cross members to support the 5 mm tipper profile and the 4 mm floor plate made of Hardox or Naxtra. Fixed 1,000 mm high steel front wall. Fixed corner stanchions with lower-mounted locks. Rear and side walls (single piece along full length) made of aluminium hollow profiles, side walls foldable and swinging with drop-side lifting assistance. Tailgate also foldable and swinging, with central locking integrated in the tipper profile. Floor plate made of Hardox or Naxtra, 4 mm thick, cleanly welded to the tipper profile and longitudinal/cross members. Press traverse and tipping arms are recessed and correspondingly reinforced in the longitudinal members. Lashing eyes (4 per side), positioned externally along the length of the tipper floor. Steel structure made of St 52-3. All steel components are sandblasted, superstructure parts painted or powder coated in RAL 9016 (pure white). Subframe: Subframe for mounting the front and rear tipping arms, with press traverse and cross members. In the crane mounting area, designed as a closed box profile with side-mounted crane mounting plates. Plastic mudguards.