Used Sanders for sale (1,607)

Condition: excellent (used), Catalog number 7431 TECHNICAL DATA Isdpfx Ahozw Dibsnoig - max. width of the workpiece: 950 mm - max. height of the workpiece: 150 mm From above: - metal roller, pressure roller - unit (fluted rubber roller for calibrating + shoe + metal roller) - metal roller, smooth, sliding roller From below: - conveyor belt - pneumatic belt oscillation with photocells - electric table lifting - 2 types of feed speed - main motor: 7.5 kW - feed motor: 0.6 kW - table lifting motor: 0.18 kW - working pressure: 8 bar - diameter of the dust extraction nozzle: 150 mm - dimensions (L/W/H): 1600x1250x2000 mm - weight: 1109 kg ADVANTAGES - German production - additional shoe included - used grinder, very good condition Net price: 19,900 PLN Net price: 4,738 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 6582 TECHNICAL DATA - max. width of workpiece: 920 mm - max. height of workpiece: 150 mm 2 units: 1) grooved rubber roller for calibrating, 11 kW 2) grooved rubber roller for calibrating + tape blowing, 7.5 kW From above: - 2 slip rubber rollers - unit - 2 slip rubber rollers - unit - 2 slip rubber rollers From below: - 3 slip rubber rollers - conveyor belt - pneumatic tape oscillation - electric table lifting - stepless feed speed adjustment - working pressure 8-10 bar - pneumatic brake Iisdezw Dchjpfx Ahnog - diameter of extraction nozzle: 2 x 160 mm - overall dimensions (L/W/H): 1600 x 1460 x 2000 mm - weight: approx. 1305 kg – German made – 2 units – used grinder, very good condition Net price: 24,900 PLN Net price: 5,929 EUR Net price calculated according to the exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 1992, Used Machine Year of manufacture: 1992 Features and technical specifications: - Designed for small workshops, with 1 Combi unit that sands from above - Working width: 950 mm - Sanding belt dimensions: 970 mm wide, 1,700 mm long - 1 combined contact roller/sanding shoe unit, drive motor 7.5 kW, with contact roller (85 Shore) and sanding shoe with felt pad and sliding surface - DFL veneer sanding device - Protected sanding shoe storage compartment inside the machine - Sanding belt drive with automatic star-delta start-up and maintenance-free, wear-free electric braking system - Additional storage compartment for an extra sanding tongue - Safety shut-off when the door is opened - Pneumatic sanding belt tensioning device - Belt feed mechanism, driven by a worm gear motor, feed speeds of 4 and 8 m/min, and automatic control for belt travel - LED digital display for workpiece thickness adjustment - Safety shut-off at the machine inlet in case of excessive workpiece thickness - Indicator lights to show operational readiness - Optimally positioned dust extraction hood with connection (D=160 mm) for the sanding belt - Roller table at the infeed Isdozy Dzcspfx Ahnjig - Complete pneumatic control system, including automatic pressure switch, control and monitoring devices - All electrical switching elements—main switch, fuses, contactor control with motor protection relays, and display devices—in VDE-compliant design - Total connected load: approx. 9 kW - Operating voltage: 380 V, 50 Hz - Dimensions: approx. 1500 x 1650 x 2000 mm - Weight: approx. 1200 kg

Condition: excellent (used), functionality: fully functional, Motor power 11 kW First calibration unit with steel roller Second unit with rubber roller Belt cleaning blow-off Working width 1100 mm Two feed speeds for sanding belts Iedpfx Ajzz Nmyshnoig Stepless adjustable conveyor feed Electric table height adjustment Shoe with adjustable activation time Brush at workpiece outlet Pneumatic oscillation

Condition: excellent (used), functionality: fully functional, working width 1350 mm, calibration unit with metal roller, combination unit with two rubber rollers and multi-segment pad, oscillation by photocells, machine function activation from control panel, belt blow-off, stepless feed speed regulation for sanding belt on 2nd unit, pneumatically controlled multi-segment pad with adjustment, year of manufacture 2007, electric table adjustment, material thickness gauge, vacuum under-table. Isdpfjzz Nmmex Ahneig

Condition: like new (used), functionality: fully functional, total motor power 14 kW two sanding units plus a milling unit Iiedszz Nl Aepfx Ahnog two shoe lasts controlled by a timer variable feed speed regulated by variator two sanding belt speeds plus right/left rotation infinitely variable milling speed control via inverter sanding belt air blowing mechanical oscillation CE marking year of manufacture 1999 380 V

Condition: ready for operation (used), functionality: fully functional, working width 950 mm calibrating unit with metallic roller combination unit with rubber roller and automatically engaged shoe star-delta start pneumatic oscillation controlled by photocells two conveyor feed speeds motor power 11 kW year of manufacture 2000 power supply 400V Ijdpfx Ahszz Nkrsnoig weight 975 kg

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Iiedeudxchjpfx Ahnsg Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS Isdoxqggcopfx Ahnjig 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Year of construction: 1992, Wide Belt Sander VIET Target 211 A Calibration and fine sanding machine with 2 sanding units and one motor, sanding from above Working width: 1100 mm Abrasive belt dimensions: 2200 x 1130 mm Workpiece dimensions: 4 – 160 mm Motor for table height adjustment: 0.18 kW, 400 V, 50 Hz Main motor: 8.0 kW, 400 V, 50 Hz 2 feed speeds 1st unit: Rubber-coated sanding roller, 90 Sh, 2nd unit: Fixed sanding pad & air cushion sanding pad, timer controlled Compressed air requirement: approx. 6 bar Extraction connection diameter: 2 x 150 mm Approx. dimensions (L x W x H): 1700 x 1750 x 1800 mm Weight: approx. 1,400 kg Automatic workpiece thickness adjustment with digital display Workpiece thickness adjustment via foot pedal Automatic conveyor belt centering Abrasive belt oscillation Abrasive belt (emergency) stop with disc brakes Table extension with 2 rollers at infeed and outfeed Emergency stop Main switch CE compliant Iedjy Exhwspfx Ahnoig INCLUDES many sanding belts INCLUDES 2 pcs newly covered graphite sanding pad inserts NEW bearings for return rollers NEW drive belts for the motor Note on used machinery: • Errors in technical specifications and prior sale excepted. • Stated prices are ex works - free loading! • Machines have been cleaned and tested for functionality. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect the machines on site. • Special arrangements are only possible in writing. (Enquiries are only answered if you provide your address and telephone number!)

Condition: used, Year of construction: 1993, Used Machine Iiedpfx Aezyy Dmshnsg Year of manufacture: 1993 Features and Technical Specifications: - Combination sanding unit with rubber contact roller and sanding shoe - Sanding width: 1100 mm - Max. workpiece thickness: 150 mm - Min. workpiece thickness: 3 mm - Sanding belt length: 1900 mm - Sanding belt width: 1130 mm - Roller diameter: 180 mm - Sanding shoe width: 60 mm - Feed rate: 5–18 m/min - Compressed air: 6 bar - Motor: approx. 9 kW - Dimensions (W x H x L): approx. 1600 x 2315 x 2150 mm - Weight: approx. 1880 kg

Condition: excellent (used), Working width: 1,360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2,160 x 2,260 x 2,025 mm Weight: approx. 2,200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically controlled (timed) for veneer sanding 3rd unit: Cleaning brush Abrasive belt oscillation with selector switch Feed conveyor oscillation pneumatic Motorized workpiece thickness adjustment with LED display Units equipped with emergency brake device Emergency stop button at infeed Roller table extension at infeed Complete documentation included Note – Used machines: Iodeych Igopfx Ahneig • Subject to technical changes and prior sale. • Prices quoted are ex location – loaded on truck! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no warranty or guarantee. Buyers are free to inspect the machines at the site. • Special agreements are only valid in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Wide belt sander for calibration and fine sanding Working width 1100 mm Min. / max. workpiece height 3 - 120 mm Feed motor power 0.8 kW Sanding belt speed 18 m/sec Sanding belt dimensions 1115 x 2620 mm Feed speed 4.5 / 9 m/ min Suction connection 3 x 160 mm Compressed air connection 6 bar 1st unit Sanding roller rubber-coated 90 Sh Motor power 11 kW 2nd unit Combi unit Iiedpfxstwzyfe Ahneg Rubber-coated sanding drum 60 Sh Sanding pad, rigid Motor power 11 kW 3. cleaning brush unit Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Table extension in the outfeed Dimensions approx. L x W x H = 2291 x 1784 x 2350 mm Weight approx. 3000 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Year of construction: 2008, Working width: 1100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 - 13 m/min Feed motor output: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1705 x 1545 x 1905 mm 1st unit: Steel contact roller, diameter 160 mm Motor output: 15 kW, 400 V, 50 Hz 2nd unit: Combination unit with rubber-coated contact roller (Sh 65), rigid sanding shoe Iisdpfeychqzex Ahnjg Motor output: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air 3rd unit: Cleaning brush Multi-function display Multi-function lever (conveyor belt, workpiece thickness adjustment) Electronic belt oscillation Pneumatic conveyor carpet oscillation Motorized workpiece thickness adjustment with LED display in 0.1 mm increments Units with emergency braking system Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 loose rollers Automatic star/delta start Complete documentation Note for used machines: • Specifications and prior sale subject to change. • Stated prices are ex works – loaded free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machine on site. • Special agreements are only possible in written form. (We only respond to inquiries providing your address and telephone number!)

Condition: new, edge sanding machine - made in AUSTRIA motor 2,2 kW, 400 V, 50 Hz Ijdpfxe Dxrgs Ahnjig oszillation 0,18 kW, 400 V, 50 Hz sanding belt length 3000 mm sanding belt width 200 mm work table seize 1000/ 300 mm weight 300 kg roller DM 120 mm sanding roller DM, exchangeable 65/ 115 mm small sanding table for round sanding 350/ 250 mm mitre fence suction DM 140 mm

Condition: reconditioned (used), Grinding table dimensions: 2500 x 800 mm Grinding belt dimensions: 6800 x 150 mm Motor power approx. 3.0 kW Mechanical table height adjustment Right-left rotation 2 grinding belt speeds Grinding belt cover on top CE Incl. special grinding shoe Note on used machines: • Errors in technical information and prior sale reserved. • Prices quoted are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. Isdpfev D H Sisx Ahnsig • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: new, 0,6 t -- mm -- mm consisting of: 30x article no. 2-280510 Quick release pin short - Clamping of 2 components - burnished - with twist lock 8x article no. 2-280410.N Universal stop 150 L - nitrided - nitrided - as standard with fine scaling on both sides 4x article no. 2-280420.N Universal stop 225 L - nitrided - nitrided - as standard with fine scaling on both sides 8x article no. 2-280110.G Stop and clamping angle 175 L - cast / black oxide finish - Hole / elongated hole - Cast / burnished 2x article no. 2-280162.N Stop and clamping angle 500 G - nitrided - Left stop - nitrided 1x article no. 2-280166.N Stop and clamping angle 750 G left - nitrided - Left stop - nitrided 1x article no. 2-280167.N Iisdsgvq Hlspfx Ahnsg Stop and clamping angle 750 G right - nitrided - stop on the right - nitrided 1x article no. 2-280910 Tool trolley - painted - Permissible total weight 240 kg 1x article no. 2-280164.N Stop and clamping angle 500 G with turning angle left - Left stop 1x article no. 2-280165.N Stop and clamping angle 500 G with right angle of rotation - stop on the right - Cast / nitrided 4x article no. 2-280152.N Stop and clamping angle 300 G - nitrided - Left stop - nitrided 8x article no. 2-280651.1. Prism Ø 60 135 ° with screwed-in collar - aluminum - aluminum - M16 thread for e.g. B. Prism Extension Item No. 280649 16x article no. 2-280610.N Professional screw clamp - nitrided - nitrided 6x article no. 2-280630.N Professional screw clamp 45 ° / 90 ° - nitrided - nitrided 4x article no. 2-280426.N Universal stop 300 - nitrided - 3 system holes - nitrided

Condition: excellent (used), CATALOG NUMBER 7910 TECHNICAL DATA - Max. working width: 1350mm - Max. working height: 150mm – From above: - Rubber pressure roller Iodpsy T Ip Tefx Ahneig I unit (metal grooved roller for calibration) II unit (two smooth metal rollers + sequential sanding pad) - Rubber pressure roller - Cleaning brush – From below: - Infeed roller, metal - Feed belt - Outfeed roller, metal, slip type - Pneumatic belt oscillation with photocell control - Electric table lifting - 2 feed speeds: 2–14m/min - Main motor: 5.5/15 kW - Brake - Grinding height potentiometer - Feed motor: 0.75kW - Working pressure: 8 bar - Extraction nozzle diameter: 200mm, 120mm - Dimensions (L/W/H): 1860x2200x1980mm - Weight: 1995kg ADVANTAGES – German-made – Unpainted – DTR technical documentation included – Used sander, in very good condition Net price: 38,900 PLN Net price: 9,260 EUR based on 4.2 EUR rate (Prices may change with significant rate fluctuations)

Condition: like new (used), Year of construction: 2019, functionality: fully functional, New wide belt sanding machine for wood panels (including dust extraction) Iiedpfx Ajxxlz Uehnog

Condition: excellent (used), Catalog number: 8090 TECHNICAL DATA - max. width of the workpiece: 1100 mm - max. height of the workpiece: 160 mm - 2 units: * from above: - metal roller, pressure roller - 1) grooved rubber roller for calibration - metal roller, pressure roller - 2) metal roller + backing + metal roller - metal roller, pressure roller * from below: - 2 rubber rollers, slip rollers - conveyor belt - 2 rubber rollers, slip rollers - grinding thickness potentiometer - belt blowing system - pneumatic belt oscillation Isdpfx Aozwgacshneig - electric table lifting + manual (for precise adjustment) - stepless feed rate adjustment - with pneumatic brake - total power: 16 kW - diameter of dust extraction nozzle: 2 x 160 mm - overall dimensions (L/W/H): 1850 x 1600 x 1900 mm - weight: approx. 1200 kg ADVANTAGES – 2 units – Italian production – unpainted – used grinder, very good condition Net price: 32900 PLN Net price: 7833 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: used, Year of construction: 2018, total width: 1,800 mm, total height: 2,200 mm, total length: 1,900 mm, Colour: Grey Empty weight: 1.500 kg Wide belt sander Boere Sandrite 1100C 380V Maximum sanding width 1100mm Maximum sanding height 150mm Sanding unit COMBI Engine 11kW (15HP) Transport dimensions:1800x1300x2100mm (LxWxH), Weight 1850kg - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 18.03.7507 - Number of units [pcs]: 1 - └ Unit 1: - - Position: Top - - Type of unit: Sanding pad - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1100 - - Roller diameter [mm]: 150 - - Roller material: Rubber - - Motor power [kW]: 15 - Max. working width [mm]: 1100 - Min. working height [mm]: 3 - Max. working height [mm]: 152 - Feed motor [kW]: 0.55 - Feed speed: Manual - Min. feed speed [m/min]: 2.5 - Max. feed speed [m/min]: 8 Iiodpfx Asyz U Dmjhnjg - Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 28 - Fuse [A]: 32 - Power [kW]: 15.6 - Transport dimensions: 1900mm x 1800mm x 2200mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, functionality: fully functional, total width: 1,280 mm, total height: 1,920 mm, total length: 1,560 mm, working width: 900 mm, overall weight: 1,100 kg, type of input current: three-phase, input voltage: 400 V, SCM Sandya Uno Wide Belt Sander Iiodpszvfb Nefx Ahnsg Working width: 900 mm Working height: 3–160 mm Number of sanding units: 2 Unit with rubber roller Combi unit with pad Main motor power: 11 kW Pneumatic oscillation Abrasive belt dimensions: 930×1525 mm Two feed speeds: 4.5–9 m/min Machine dimensions: 1560 x 1280 x 1920 mm Weight: approx. 1100 kg

Condition: used, Technical specifications: Working width: 1100 mm 1 Combined unit Shaft diameter: 200 mm Height of material being processed: 160 mm Dimensions of the abrasive belt: 2300x1115 mm Belt feed speed: 2 speeds Diameter of the dust extraction nozzle: 2x180 mm Iijdpfxezza I Ij Ahnsg Electric lifting mechanism Analog display Safety switch Main motor power: 9.5 kW Voltage: 380 V Overall dimensions: Length: 1950 mm Width: 1800 mm Height: 2300 mm

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide-belt sanding machine with electronic segmented sanding pad and finishing sander. Iiodpezqvmrjfx Ahnjg Ideal sanding machine for interior construction companies, also suitable for intermediate sanding before painting. Edge banding machine with a combination unit and electronic multi-segment pressure bar, edge segments can be switched on and off. Segment width of the pressure bar: 35 mm Contact roller pneumatically adjustable, low wear due to grooved steel roller. Grain size compensation. Drive motor 7.5 kW with automatic motor brake, stepless belt speed controlled by a frequency inverter from 2 - 18 m/s. Belt feed steplessly adjustable via a frequency inverter from 2.5 - 13 m/min. Pneumatic workpiece-controlled belt blowing device. Cleaning brush at the discharge. Constant working height of 900 mm by adjusting the upper part of the machine, thus also integrable in sanding lines. Feed belt still has good grip and is in very good condition. Maximum sanding width approx. 1340 mm. Workpiece height approx. 3 to 150 mm. Common sanding belt dimension: 1360 x 1900 mm. 3 rubber-coated pressure rollers. Infeed roller table and foldable discharge table. Preparation for vacuum blower. The belt is perforated and connectors for an optional blower are available. Alternatively, the belt can also be connected to the extraction system. Extraction connection: 1 x 200 mm, 1 x 140 mm and 2 x 100 mm. Terminal control with 50 programmable sanding programs for automated machine control. Parameters: belt speed, feed speed, workpiece height, pressure bar engagement points front and rear, edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller. CE marking. Operating manual. Without the illustrated connection cable. Original paint, only partially retouched. Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150 mm (L x W x H). Weight approx. 2400 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: used, Year of construction: 1991, functionality: fully functional, WELL-MAINTAINED, USED BÜTFERING BELT GRINDER FOR SALE! Ijdez A A Svspfx Ahnjig