Used Sanding Pad for sale (2,811)

Condition: used, used 2-belt sander 1x with continuous pneumatic pressure feed 1x sanding unit 100 mm vacuum clamping device Manufacturer: Heesemann Type: BA2 Machine no. 7304051 Motor: 7.5 / 11 kW Sanding length approx. 2550 mm Sanding width approx. 100 / 150 mm Belt length approx. 8500 mm Table size approx. 2550 x 1350 mm Throat (right) approx. 600 mm Upper belt cover Table lighting Vacuum clamping device with pump 9 vacuum suction plates Belt speeds 710 / 1430 m/min Sanding shoe 2450 mm Kodpfx Absyvvr Uscoww Extraction connection D 180 / 250 mm Required space approx. 4500 x 1400 x 1800 mm Weight approx. 1500 kg Total connected load approx. 12.5 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery as seen, as inspected, without warranty or guarantee

Condition: used, Year of construction: 2000, used, top equipment, excellent condition, low hours Manufacturer: Johannsen Model: T94 Year of manufacture: 2000 Machine no.: 22138 CE type tested GS wood dust tested Motor: 5.5 / 0.25 kW Sanding length: approx. 2600 x 960 mm Sanding width: approx. 960 mm Belt length: approx. 7800 x 150 mm Table size: approx. 2790 x 960 mm Throat depth right: approx. 850 mm Electric adjustment Kedpfx Aoyvvr Ijbcoww Upper belt cover Upper sanding support Table lighting Belt speeds: 1434 m/min Right-left travel Belt blow-off Sanding shoe: 300 x 140 mm Extraction connection: D 180 mm Required space: approx. 4000 x 1500 x 1500 mm Weight: approx. 1000 kg Total connected load: approx. 5.7 kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: used, Year of construction: 1997, functionality: limited functionality, - Oscillation defective - Main switch replaced - Machine is operational - Sold without warranty Kwedpfx Asyi Ug Ajbcsw

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Kodpfx Asq Nf S Robcsww Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.

Condition: new, Sand Gravel Fabrication Plant: Essential Solution for Modern Construction Needs In the construction and infrastructure industry, high-quality sand and gravel are critical raw materials for creating concrete, asphalt, and other foundational elements. A Sand Gravel Fabrication Plant is the cornerstone of producing these materials efficiently and at scale. With advanced technology, versatility, and scalability, these plants cater to a wide range of projects, ensuring consistent quality and meeting the growing demand for construction materials. This article explores the general introduction, features, and applications of sand gravel fabrication plants, including both stationary and mobile systems. General Introduction to Sand Gravel Fabrication Plants A sand gravel fabrication plant is a specialized facility designed to process raw materials such as sand, gravel, and aggregates into construction-grade products. These plants combine various equipment, including crushers, screens, conveyors, washers, and storage units, to convert raw materials into ready-to-use aggregates. There are two primary types of sand gravel fabrication plants: Stationary Fabrication Plants: Fixed installations designed for high-capacity production. Ideal for large-scale operations and long-term projects. Mobile Sand Gravel Fabrication Plants: Portable systems that can be transported to different project sites. Perfect for temporary operations and projects in remote locations. Both types are equipped with advanced machinery and automation systems to ensure high efficiency, precision, and sustainability. Applications of Sand Gravel Fabrication Plants Sand gravel fabrication plants are indispensable across multiple industries due to their ability to produce high-quality aggregates. Key applications include: 1. Construction and Infrastructure Kwodpfx Aevlwqljbcjw Produces sand and gravel for concrete, asphalt, and base materials. Supports large-scale infrastructure projects such as highways, bridges, airports, and railways. 2. Residential and Commercial Development Supplies aggregates for building foundations, driveways, landscaping, and drainage systems. Plays a vital role in residential housing and commercial property construction. 3. Road Construction Provides high-quality crushed stones and sand for roadbeds, pavements, and highways. Ensures durability and longevity of road surfaces. 4. Mining and Quarrying Efficiently processes mined materials into usable aggregates. Enhances productivity in quarrying operations with optimized material handling systems. 5. Environmental Restoration Supplies aggregates for erosion control, land reclamation, and shoreline protection projects. Facilitates sustainable environmental rehabilitation efforts. 6. Recycling of Construction Waste Mobile sand gravel fabrication plants are ideal for recycling concrete and asphalt. Converts waste materials into usable aggregates, reducing landfill burden and promoting sustainability. Stationary vs. Mobile Sand Gravel Fabrication Plants Stationary Fabrication Plants Best For: Long-term, large-scale projects and industrial operations. Advantages: High-capacity production. Robust and durable structures. Advanced automation for minimal manual intervention.

Condition: used, Year of construction: 2001, Abrasive belt length, 1st unit: 2150 mm Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Cross belt design 1st unit: Cross belt sanding shoe 1st unit: Electronic segmented shoe Kodpexzi S Nefx Abcsww Abrasive belt width, 1st unit: 150 x 4800 mm Drive, 1st unit: kW 2nd unit: Longitudinal roller design 2nd unit: Steel calibrating roller Abrasive belt length, 2nd unit: 2150 mm Abrasive belt width, 2nd unit: 1350 mm Abrasive belt speed, 2nd unit: 18 m/sec 3rd unit: Shoe unit design 3rd roller: Electronic segmented pressure beam SDS Sy Sanding shoe, 3rd unit: Electronic individual segments, 32 mm width Abrasive belt length, 3rd unit: 2150 mm Abrasive belt width, 3rd unit: 1350 mm Suitable for lacquer sanding: Yes Belt blow-off: Yes Vacuum conveyor belt: Yes Feed speed, fixed: stepless 5-15 m/min Control: Touchscreen control Electr./pneum. belt oscillation: electric Infeed height: variable (lower table runs) Table stroke: electro-motor Digital table display Working height or feed table height: 880 mm Location: Nattheim

Condition: new, Working width: 381 mm Working height: 150 mm Kjdpfx Abek Rit Nsceww Main engine 7,5 HP 3P Feed motor 1/4 hp Feed speed 6.2 m/min grinding belt dimension 405 x 1372 mm Machine size 1000 x 730 x 1680 mm Packing size 750 x 830 x 1900 mm N.W./G.W. 450/500 kg You can call or write us. We can speak and write German and Russian. You can also send messages in English. 34.4.4.

Condition: used, Used Percussion Mill Kleemann (for sand) available from Koreman in Maastricht, the Netherlands. Kwodpfxsywbdfs Abcew

Condition: new, Year of construction: 2022, Belt width: 150mm Kodpeiuld Dsfx Abceww Belt length: 2600mm Oscillation: yes Sanding rollers for curves: 1 Sanding unit can be swivelled: yes Table size: 750mm x 290mm Suction connection: 120mm Motor power: 3kW Machine length: 1700mm Machine width: 700mm weight: 180kg

Condition: used, Percussion Mill Kleemann (for sand) Kwsdpoyv Eh Sefx Abcew

Condition: good (used), Year of construction: 1994, I will sell a Tampoflex Jumbo 150-400 pad printing machine, manufactured in 1994. Functional and in good condition. Kwjdpfx Aov Eqatobcsw

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, grinding height: 100 mm, overall weight: 500 kg, grinding width: 300 mm, 3-sided profile sanding machine / brush sanding machine Manufacturer: Loewer Model: MultiMaster LZ 3 Compact 3-sided sanding machine for mouldings, facade boards, profiled timber, etc. The machine comes from a flooring and panel manufacturing facility. Year of manufacture: 2006 CE mark Kwedpfxoyinw Uj Abcew Working width: 300 mm Max. pass-through height: approx. 100 mm Fitted with 4 sanding brush units: - 2x from above - 1x from the left - 1x from the right Spindle diameter: approx. 30 mm Max. brush diameter: approx. 300 mm Brush speed infinitely variable Feed rate infinitely variable, max. approx. 16 m/min Voltage: 400 V, 50 Hz, 3-phase On-site circuit protection: 20 A Weight: approx. 500 kg

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 4,200 kg, Fine and smoothing sanding machine Heesemann, model: FGA 6 For intermediate lacquer sanding, wood surface smoothing, and sanding of foils The machine is fully functional, well maintained, and in very good technical condition. The conveyor belt has been replaced. Sanding width: 1300 mm Working height: 880 mm, constant Maximum workpiece thickness: 3–80 mm Transport bed: with individual transport belts Drive: 2.5 kW three-phase motor, including blow-off unit Feed speed: 4.5–22 m/min, adjustable Units Brush roller unit: centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Longitudinal sanding unit Continuous electronic adjustment of the sanding belt speed via frequency inverter Wear-free brake unit Pneumatic belt tensioning Intermittent belt blow-off device Infrared belt control Counter-rotating sanding belt Sanding belt dimensions: 2620 x 1350 mm Belt sanding speed: 0.3–12 m/s Drive power: 11 kW Graphical operator terminal for inputting machine settings, including numeric thickness adjustment and displays for fault sources, workpiece throughput, and feed speed Electronically controlled pressure beam Control roller spacing: 40 mm Kwsdjya I Iuopfx Abcsw Pneumatic belt tensioning The pressure beam's contact surfaces automatically adjust to the shape of the passing workpieces Workpiece vacuum hold-down system: Fan with 5.5 kW drive power Operator side and terminal: left Operating voltage: 400 V, 50 Hz Space requirements: 2550 x 2220 x 2300 mm Weight approx.: 4200 kg (Technical specifications are subject to change and errors, as well as prior sale.)

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. Kedpefyadbsfx Abcsww The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Condition: used, Year of construction: 2019, operating hours: 1,580 h, functionality: fully functional, total length: 1,100 mm, total width: 670 mm, total height: 1,440 mm, overall weight: 410 kg, power: 3.55 kW (4.83 HP), rotational speed (min.): 2,480 rpm, rotational speed (max.): 1,220 rpm, grinding width: 250 mm, The Bomar orbital 250 NS machine has served us well for edge grinding of profiles. However, as our production has changed, we no longer have use for it. The machine is ready for further use and available for immediate collection. We can arrange loading of the machine onto the customer’s transport. Kedpfx Abjyn Dyvscjww

Condition: used, Year of construction: 1997, type of input current: three-phase, DELLA VEDOVE profile sander Kwodpfx Aeytcv Hebcow

Condition: ready for operation (used), Year of construction: 1989, grinding belt length: 2,600 mm, grinding belt width: 150 mm, space requirement width: 900 mm, space requirement length: 1,650 mm, Langzauner LZK 3/2 edge sanding machine motor power 2,2kW Belt dimension 2600 x 150 mm Belt speed 20m /sec Table dimensions 1000 x 350 mm Height adjustment 200 mm Weight 300 kg Space requirement 1650 x 900 mm Kwedporgpw Aefx Abcsw Sanding unit 45° tiltable Veneer sanding unit Oscillation Feed console year of construction 1989 Condition: fully functional

Condition: ready for operation (used), functionality: fully functional, Offered are 2 x feed hoppers / sand hoppers / hoppers / sand storage containers / sandblasting tanks / bulk material containers as shown in the photos. Kedpfx Aeyupv Nebcsww Ideal for sand, but also suitable for many other materials. Can be laid flat on a truck for easier transport. Very good condition. Inspection welcome north of Flensburg. B2B sale only. More info/photos upon request – just write or call.

Condition: used, Year of construction: 1995, functionality: fully functional, grinding height: 100 mm, grinding length: 3,250 mm, We are offering this used Löffler KSL-100 MG edge sanding machine, year of manufacture 1995. Manufacturer: Löffler Maschinenbau GmbH Langenaltheim / Bavaria Model: KSL-100 MG Serial number: 95.005/6/95 Year of manufacture: 1995 Kwjdpfjythu Ijx Abcew If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 03/2027, type of input current: three-phase, Lye Coating Machine Drautz RD 100 Compact design One-person operation & easy cleaning Double lye curtain With stripping unit Connection: 400V, 16A CEE plug Used machine With warranty & spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Kwsdpfx Ajxmrbdjbcsw Options: Maintenance contract Service package Salting unit Delivery service Spare parts box for increased safety Training & commissioning Visit our extensive selection!

Condition: used, used, good condition, low operating hours Manufacturer: Johannsen Type: T82K Machine No.: 14883 GS-certified Motor: 7.7 kW Sanding length approx. 2700 mm Sanding width approx. 950 mm Belt length approx. 7800 mm Table size approx. 2800 x 950 mm Throat left approx. 850 mm Upper belt cover Adjustable upper sanding support Right-left run Belt blow-off Sanding shoe 450 x 140 mm Extraction connection D 160 mm Space requirement approx. 4300 x 1500 x 1400 mm Kedjythb Uepfx Abcsww Stock location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-inspected condition, without warranty or guarantee

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, input voltage: 380 V, input current: 25 A, input frequency: 50 Hz, Profile sander FLADDER 300/L.S.4 Kwodeyrqzbjpfx Abcjw Year of manufacture: 1996

Condition: new, Deburring machine brand: Aboagye Kwodpfx Ajdurxnsbcow Model: AF 165 Condition: new machine Speed: 2,800 RPM maximum cutting width: 1 mm equipped as standard with: -Special flap disc K80-ST -Suction nozzle -Manual

Condition: ready for operation (used), Year of construction: 1994, Wide Belt Sander HEESEMANN KSM 8 CSD incl. EA2 Year of manufacture: 1994 Condition: used – ready for operation Description Wide belt sander Condition: Functionally tested – Working width: 1300 mm – Cross sanding unit with belt blow-off device – Longitudinal sanding unit with infinitely variable speed and belt blow-off device Kwedpfx Abex N A Aascsw – Calibration roller, activatable via control panel – Vacuum conveyor belt – feed speed infinitely adjustable – Satin finishing roller – Brush roller – Machine settings and pressure control system CNC-controlled - EA dust extraction machine: High-pressure blow-off system with rotating nozzles and ionization for removal of statically charged dust Location: ex client site - Immediately available - Machine must be dismantled by the customer and collected at short notice

Year of construction: 2014, condition: used, machine/vehicle number: 753.04.14, Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green Kedexrb Rfepfx Abcoww - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg