Used Saw And Drill for sale (15,757)

Condition: used, Year of construction: 1999, - Usable cutting length: 1600 mm - Saw blade overhang: 100 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) Panel dividing saw with infeed table and destacking device Manufacturer: Giben Type: Prismatic 2 h100 SPT Year of manufacture: 1999 Technical data - Usable cutting length: 1600 mm - Saw blade overhang: 100 mm - Clamping chuck opening: 117 mm - Working height: 950 mm - Lifting table dimensions: 1600 x 2700 mm - Max. stack height: 620 mm - Dimensions: 2444 x 1220 mm, 2500 x 1250 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) High-speed saw carriage Nsdpfx Aozuyywjiyoda - 2 guide shafts: 40 mm - Saw carriage drive via frequency-controlled motor - Feed speed: 1 - 100 m/min - Return speed: 100 m/min Adjustment of the saw carriage speed from the control panel. Automatic cutting length control according to the panel dimensions - Scoring saw speed: 5035 rpm - Carbide-tipped saw blade speed: 3760 rpm - Main saw motor power: 11 kW - Scoring saw motor power: 2.2 kW - Main saw blade: 400 mm - Main saw spindle: 75 mm - Scoring saw blade: 215 mm - Scoring saw adjustment from the outside in stepped increments to: 0.025 mm - Changing the main saw and the scoring saw via a quick-release system (pneumatic) Sliding table - Support table in the sliding table area with free-running roller rails - Top-mounted sliding table with 3 floating clamping chucks with patented, foldable lower clamping chuck fingers - Sliding table drive via servomotor - Drive torque: 6.5 Nm - Feed speed: 1 - 60 m/min - Return speed: 60 m/min - Cable routing via drag chain - 2 front aligners Automatic infeed via lifting table - Dimensions: 1600 x 2700 mm - 4-column spindle lifting table with 12 free-running roller groups - Automatic package height counting when lifting the panels via control - Min. panel dimensions: 2000 x 1200 mm - Max. stack height without pit: 620 mm - Max. load: 12 t - Infeed height: 330 mm Support table - 2 pcs support table with PVC surface 2000 x 510 mm Machine control G-Drive 1D Extraction - 1 extraction port on the pressure bar: 115 mm - 1 extraction port on the lower side of the machine bed: 200 mm - The chip extraction takes place directly at the saw unit via sheet metal ducts into a chip duct arranged along the saw line, which is sealed with flexible rubber lips. Performance parameters - Average cycle time/saw cut: approx. 25 s Quality - Cutting accuracy: +/- 0.15 mm is guaranteed (for straight panels) - Angularity: +/- 0.15 mm/m Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2012, - Work area: X: 9000 mm / Y: 2700 mm - Gantry 1: 5-axis milling spindle 20/26 kW - 32-position tool changer - Gantry 2: 2x13 spindle drilling unit Technical data - Heavy-duty gantry system with 2 gantries - Gantries with drives on both sides (gantry drive) - CNC control SIEMENS 840D sl / PCU 50 with NCU 730 - Operator panel OP 15 with 15" display, mounted on a guide rail along the longitudinal axis Work area / machinable cube size with tool length/diameter of 160 mm - X-axis: 9000 mm with both gantries - Y-axis: 2700 mm - Z-axis: (Standard cube size 420 mm) - Customer-specific design for workpiece thicknesses up to 60 mm - 5-axis head Equipment, Gantry 1 - 1 universal head for 5-axis milling - Milling spindle power: 20/26 kW (S1/S6) - Speed adjustable up to 24,000 rpm - Water-cooled - Tool interface HSK F63 for automatic tool changes - Thread cutting is possible! Ndsdpfx Aiezuw Ixoyea - 1 chain-type tool magazine with 32 positions - With rotary gripper for fast tool changes - Magazine fixed on the operator side Equipment, Gantry 2 - 2 head mounting brackets - Equipped with 2 heavy-duty multi-spindle drilling units each - With common dust extraction hood - Each drilling unit with 13 drilling spindles (total of 26 drilling spindles) - Individually selectable vertically - Arrangement in an L-shape - 2 angled drilling spindles adjustable from 0 - 25° - 1 right, 1 left, each approx. 2.2 kW, n= 2800 rpm - Drill chuck collet Rego Fix ER 25 M Machine table - Base frame with linear guide - 12 table traverses on a linear guide for positioning in the X-direction, individually driven and positionable via NC drives - Vacuum supply integrated into the table traverse - Each traverse is individually vacuum-monitored and linked to the machine control system Workpiece infeed function - 1 belt conveyor consisting of 4 belt strands - Width 40 mm, each traverse with lifting devices - Lifting device NC-controlled - Stroke 110 mm (+10 mm, -100 mm) - The machine should be installed in a foundation pit of approx. 300 mm - Vacuum pump Bush type: Mink MM 1322 - Suction capacity 250 m³/h - With intermediate tank 500 l for rapid vacuum generation - 2 chip transport belts under the machining area for the removal of chips and/or small swarf up to a size of max. 100 x 100 x 100 mm - Automatic central lubrication Work safety - Moving protective cabin on both gantries - Protective cabin with safety bumpers and safety light curtain system on the operator and rear sides (due to automatic table adjustment)

Condition: used, Year of construction: 2019, Panel saw Manufacturer: Holzmann Model: K5-320VFP-2000 Nodpfx Aszuy Risiysda Year of manufacture: 2019 Technical data Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2019, CATALOGUE NUMBER 8030 TECHNICAL DATA - Track width 495mm - Working width of the saw blade shaft 500mm - Max. blade diameter 500mm - Max. cutting height 170mm - Blade arbor diameter 80mm - Table dimensions 2170x950mm - Min. material length 740mm * Top: - Pneumatic pressure roller - Feed rollers/pawls, 2 rows Nsdpfx Aozrmvmeiyoda - 2 smooth, metal feed rollers - Saw blade shaft - 3 smooth, metal feed rollers * Bottom: - Guide rail - Feed roller - Feed rollers/pawls - Track - Toothed feed roller, metal - Central lubrication, electric - Infinitely variable feed speed adjustment 2.5 – 24 m/min - Electric lifting of the machine body up/down, 0.55kW - Feed motor 5.5kW - Main motor 75kW - Dust extraction nozzle diameter 290mm - Overall dimensions L/W/H 2800x2100x2000mm - Weight 4250kg ADVANTAGES – Made in Germany – Control panel at eye level – Max. cutting height 170 mm – Multi-blade saw, used – Very good condition Net price: 78900 PLN Net price: 18786 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to currency fluctuations)

Condition: used, Year of construction: 2007, Saw blade overhang 95 mm Saw carriage feed: forward 1-130 m/min reverse constant 130 m/min Program slider speed: forward 80 m/min reverse 80 m/min (in EU countries forward = 25 m/min) Automatic pressure beam height control yes Automatic cutting height control yes Adjustable pressure beam clamping pressure yes Adjustable clamping chuck clamping pressure yes Completely shrouded machine table (saw body) yes Angle guide device min. pressing width 0 mm max. pressing width complete cutting length Main saw motor 18.0 kW Scoring saw motor 2.2 kW Operating voltage 400 V / 50 Hz Electrical connection value for high-power motor: 18.0 kW = 24 kW 21.0 kW = 27 kW Working height 920 mm Paint finish: textured paint gray RDS 240 80 05 Ndsdpfszuph Djx Aiyoa Main saw blade 380 x 4.4 x 60 mm Scoring saw blade 180 x 4.4 - 5.4 x 45 mm Required air pressure 6 bar Compressed air consumption 150 NL/min V at the dust extraction nozzle approx. 26 m/s Vacuum min. 1200 Pa Exhaust air volume 4600 m³/h Dust extraction connection, chip channel 1 piece 200 mm Dust extraction connection, pressure beam 1 piece 150 mm HPP 380/43/43 Cutting length 4300 mm Cutting width (program slider travel) 4250 mm Roller rail (10-track element) 1 piece Roller rail (2-track element) 5 pieces Clamping chucks 7 pieces of which the first 3 pieces are two-finger, all others are single-finger Spacing 75/275/475/1050/1850/2650/3450 mm measured from the angle ruler to the center Clamping chuck 2 additional two-finger clamping chucks possible Pos. 175/375 mm 1 additional single-finger clamping chuck possible Pos. 650 mm 4 manual trimming stops on clamping chucks Pos. 75/475/1050/2650 mm Air cushion table with roller element 2160 x 650 mm 4 pieces Central blower 1 piece Nozzle spacing of the air cushion tables 70 x 70 mm Specifically designed for bending parts. The lifting device shown in the pictures is not included.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, input frequency: 50 Hz, working width: 1,200 mm, For sale: LAZZONI Group throughfeed drilling and doweling machine – Next 2+3K model, designed for efficient serial production of furniture components. The machine is equipped with automatic feeding and return systems for the components, enabling single-person operation and significantly reducing production costs. Key information: Manufacturer: Lazzoni Group Model: Next 2+3K Year of manufacture: 2018 Control: PLC + operator panel (HMI) Function: drilling + automatic doweling Working width: 230-1200mm Working height: 10-22mm Working width: 40-260mm Power supply: 400 V / 50 Hz Installed power: 9.1 kW Machine weight: approx. 2900 kg CE certificate Working configuration: Number of heads: 5 2 side heads 3 top heads Total number of spindles: 35 7 spindles per head Spindle spacing: 32 mm Throughfeed operation – ideal for repetitive parts Automation and ergonomics: Component feeding magazine Component return magazine (no need for a second operator) Automatic doweling Quick changeovers Stable and consistent operation for large batches Application: Drawer side production Furniture carcass components Fronts, sides, moldings Ndjdpoywxy Rofx Aiyea Ideal for both large companies and smaller businesses focusing on automation The machine is in good working order, has been used in serial production, and is available for on-site inspection. Assistance with loading can be provided. Location: Elbląg

Condition: used, SIPA horizontal drilling machine Ndjdpjzvm Iqsfx Aiysa

Condition: like new (used), Year of construction: 2003, I sell the panel beam saw SCM Sigma 85KC. Year 2003. Cutting size 3300x3200mm. Cutting height 85mm. Main motor 7,5kW Nsdpfxszvhy Ie Aiyeda Scoring motor 1,1kW Total power 10kW Total area covered W.5400mm x D.7000mm 5 pcs. gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. WinCut optimising software included. Very good condition. Available immediately.

Condition: used, Technical specifications: Track width: 300 mm Max. cutting height: 120 mm Nodpfx Aiozhumxsyoda Max. saw blade diameter: 350 mm Min. saw blade diameter: 200 mm Saw blade speed: 4200 rpm Infinitely adjustable feed rate Automatic lubrication system Anti-kickback protection Laser marker Culaga Dust extraction port: 200 mm Safety switch Power supply: 380 V Main motor power: 26 kW Overall dimensions: Length: 2200 mm Width: 1800 mm Height: 1850 mm

Condition: excellent (used), CATALOG NUMBER 7751 TECHNICAL DATA - Track width: 250mm - Working width of roller: 250mm - Max blade diameter: 300mm - Blade bore diameter: 60mm - Max cutting height: 100mm - Table width with extension: 520mm - Table length: 1580mm *from above: - pawls: 2 rows - metal pressure slip roller - shaft with saw blades - smooth metal slip roller *from below: - slip roller - guide rail - pawls - track - central track lubrication - stepless feed speed adjustment - feed motor: 0.75kW Nsdpfjzr Izksx Aiyjda - main motor: 15kW - extraction port diameter: 200mm - overall dimensions L/W/H: 1640x1400x1550mm - weight: 1000kg ADVANTAGES – Italian manufacture – in very good condition – used multi-blade saw Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (if there are significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2011, Cross-cut and rip saw Manufacturer: HOLZMA Type: HQP 11/16/56/LX Year of manufacture: 2011 Technical data - Combined saw unit with cross-cut saw unit, cutting length 1,600 mm, and rip saw, cutting length 5,600 mm - additional pressure cylinder - postforming unit - waste flap 1600 mm - clamping device for cross-cut saw, 2-finger - automatic ejector guide - roller conveyor designed for 1,300 mm width Ndjdpfszuyzzsx Aiyea - second drive in the roller conveyor - 1 m shaking chute 550 mm (driven) - mobile CADMATIC control panel - cooling unit for individual saw - with vacuum loading system and outfeed table Note: The technical data and descriptions are a copy of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), Catalogue number 7960 TECHNICAL DATA - Max cutting height: 140mm - Max workpiece width: 700mm - Working width of saw shaft: 580mm - Shaft diameter: 70mm - Max saw blade diameter: 400mm From above: - Kickback pawls/anti-kickback devices - 2 feed rollers, toothed - Metal slip roller From below: Ndjdpfxjztacij Aiyoa - Slip roller - Kickback pawls - Smooth feed roller - Saw shaft - Smooth feed roller - Metal slip roller - Stepless feed speed adjustment via inverter - Feed motor: 3kW - Main motor: 22kW - Overall dimensions (L/W/H): 1600x1300x1900mm - Weight: approx. 2000kg Net price: 46,900 PLN Net price: 11,170 EUR (based on an exchange rate of 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: used, machine/vehicle number: 006601, Position 1: Panel Feeding and Loading PRIESS-BMA DLS-CNC Ndodswuclropfx Aiysa Position 2: CNC Flexible Drilling & Inserting PRIESS-BMA DLS-CNC

Condition: used, machine/vehicle number: 005910, X axis working area: 2500 mm Y axis working area: 1300 mm Main Electrospindle power: 6 KW Njdpfx Aswuckhoiyoda Number of controlled axes: 3 axes Total number of drilling spindles: 84

Condition: used, Model: HOLZ-HER 100 L-2 Cutting length: 5,300 mm Cutting height: 2,100 mm Power: 3 kW S1 / 4 kW S6 ED 40% Voltage: Y 380 V, 3~ 50 c/s Speed: 2840/3740/min Njdpfxjzt Dy Se Aiyeda Fully functional This saw is ideal for rough cutting. Availability: short notice Location: near Mannheim

Condition: used, bore capacity in steel (diameter) // mm throat / mm Ndodpfx Aexn Aqroiyea bore stroke / mm ABARBOGA MASKINER GSMK6012 Drill press WITHOUT VISE

Condition: used, bore capacity in steel (diameter) / mm throat / mm bore stroke / mm Nsdoxqrhfepfx Aiyjda total power requirement / kW

Condition: used, Year of construction: 1988, bore capacity in steel (diameter) 50 mm Nsdpfewt Dwasx Aiyeda arm length / mm workpiece height max. / mm Table dimensions: 1200x580mmTable dimensions: 1200x580mm

Condition: used, Used multi-blade saw SCM M3 for professional use in woodworking. This SCM M3 multi-blade saw is suitable for typical processing tasks of this type of machine and can be inspected by appointment. Further technical data and the exact condition will be provided upon request. Nsdpfxjztvrao Aiyoda

Condition: excellent (used), CATALOG NUMBER 7906 Technical specifications: - Track width: 400mm - Working width of roller: 400mm - Max saw blade diameter: 450mm - Saw blade bore diameter: 70mm - Max cutting height: 160mm - Table width with extension: 720mm - Table length: 1900mm From above: - Kickback fingers/ejectors: 2 rows - Sliding roller, metal, pressure type - Kickback fingers/ejectors - Sliding roller, metal, pressure type - Shaft with saw blades - Smooth sliding roller, metal From below: - Guide rail - Kickback fingers - Track - Electric body lifting - Central track lubrication - 2 feed speeds + stepless adjustment - Feed motor: 0.9kW - Main motor: 30kW - Extraction port diameter: 260mm - Overall dimensions (L/W/H): 2350x1800x2200mm - Weight approx: 2000kg ADVANTAGES – Italian manufacture – New track and sliders – Very good condition – Used multirip saw Net price: 55,900 PLN Net price: 13,300 EUR depending on 4.2 EUR exchange rate (Prices may change with significant fluctuations) Nedpfxjzccmqs Aiysda

Condition: used, CATALOG NUMBER 7585 Technical specifications: - wheel diameter: 630 mm - table dimensions: 850x810 mm - angle-adjustable table - motor: 3 kW - max cutting height: 320 mm - band-to-frame throat: 600 mm - dust extraction port diameter: 90 mm - brake - dimensions (L/W/H): 1300x830x2050 mm - weight: 420 kg Advantages: – Polish production – DTR documentation Ndodpszhu Nyefx Aiyoa – very good condition – used saw Net price: 8,500 PLN Net price: 2,020 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7890 Technical specifications: - Track width: 245 mm - Shaft width for edger: 380 mm - Shaft width for multi-blade saw: 320 mm - Max. blade diameter: 350 mm - Blade bore diameter for edger: 80 mm - Blade bore diameter for multi-blade saw: 65 mm - Max. cutting height: 120 mm - Table width (clearance): 900 mm - Table length: 1,780 mm Top components: - Pawls/kickback devices - Smooth pressure roller - Pawls - Smooth pressure roller - Short element insert - Shaft with saw blades - 2 smooth pressure rollers Bottom components: - Guide - Pawls/kickback devices - Track - Centralized lubrication - Laser - Stepless feed speed adjustment - Feed motor: 1.1 kW - Main motor: 30 kW - Manual body height adjustment - Manual saw shaft adjustment - Extraction outlet diameter: 210 mm - Overall dimensions (L x W x H): 1900 x 1500 x 1800 mm - Approximate weight: 2,000 kg ADVANTAGES – Made in Germany – Stepless feed speed adjustment – Shaft with floating blade for edging – Sleeve for multi-blade saw included – Laser Nsdpfszhvhkjx Aiyoda – Short element insert – Used multi-blade saw, in very good condition Net price: PLN 55,900 Net price: EUR 13,300 (based on exchange rate of 4.2 EUR/PLN) (Prices are subject to change depending on exchange rate fluctuations)

Condition: new, saw blade diameter 550 mm Number of revolutions 3580 r.p.m hole of sawblade 32 mm Control NC total power requirement 3 kW weight of the machine ca. 250 kg required space 980 x 1130 x 1430 mm The Gerd Wolff AC 550 is an automatic aluminium cutting machine which is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Schnittbereich 90° rund: 155 mm Schnittbereich 90° quadratisch: 155 x 155 mm Schnittbereich 90° rechteckig: 260 x 200 mm Schnittbereich 45° rund: 130 mm Schnittbereich 45° quadratisch: 130 x 130 mm Schnittbereich 45° rechteckig: 180 x 200 mm Standard Accessories - Location points for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for different types of profile - Saw covering with safety switch - Belt propulsion saw - Two hand safety operation - Easy to change saw blade - 2 x Pneumatic vertical piston with clamps - 1 x compressed air gun Optional Equipment - Hydrocheck – Hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting Ndsdjymf Tbepfx Aiysa - Auxiliary conveyor with rulers

Condition: new, capacity Ø 10 - 75 mm sawing motor 11 kW Nedpfxeymf Ifj Aiyjda hydraulic motor 3 kW Saw Feeding Servo 1,5 KW Siemens Material Feeding Motor 1,5 KW Siemens Saw speed 70-160 rpm /min saw-blade dia. Ø285 x 2,0 x 1,7 x 32 mm cutting range min. 1000 mm cutting range max. 7000 mm control Siemens hydraulic Rexroth Valve coolant Pulverisiertes Schneidöl required space 2950x6800 m weight of the machine ca. 3500 kg GERD WOLFF GLS-75 High-performance circular saw From 10 to 75 Millimeters round material, within seconds, they cut steal of all kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine German with turkish mechanical engineering.

Condition: new, capacity Ø 140 - 250 mm sawing motor 30 kW hydraulic motor 5,5 kW Saw Feeding Servo 3 KW Siemens Material Feeding Motor 3 KW Siemens Saw speed 30-80 rpm /min saw-blade dia. Ø750 x 3,8 x 3,2 x 80 mm cutting range min. 1000 mm cutting range max. 7000 mm control Siemens hydraulic Rexroth Valve coolant Pulverisiertes Schneidöl Njdpsymf Swefx Aiyjda required space 3500 x 8000 mm Saw speed 30-80 rpm / U pro min weight of the machine ca. 9000 kg GERD WOLFF GLS-250 High-performance circular Saw From 10 to 250 Millimeters round material, within seconds, they cut steal ofall kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine german with turkish mechanical engineering.