Used Saw Blade Grinding Machine for sale (84,337)

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Ksdpfx Acowhqprewjdw

Condition: reconditioned (used), Year of construction: 1988, Cutter Grinder Manufacturer: Maschinenfabrik Baden-Baden Model: FSS Year of manufacture: 1988 - overhauled, newly painted RAL7012 basalt grey, RAL 7035 light grey Machine No.: 3018 Warranty: 12 months in single-shift operation from delivery. For machines located outside our North Bavarian sales area, travel costs are to be borne by the customer. Accessories: - Machine stand Ksdjxxyt Sjpfx Acwedw - Grinding wheel with flange - Operating manual including new electrical system On/off switch in new housing with undervoltage release coil to provide restart protection (e.g. in the event of power failure or unplugging) Used, sold as seen The machine is technically in accordance with the status of its year of manufacture.

Condition: used, Year of construction: 1999, grinding length 1.000 mm grinding width 550 mm workpiece height 400 mm table surface area 1.580 x 550 mm table load capacity 950 kg magnetic clamping plate 1.000 x 550 mm x-Travel 1.200 mm Kdjdpfoxx A Dmox Acwew table feed 1 - 30 m/min vertical feeds: 1 - 300 mm/min z-axis 470 mm cross feed 1 - 2.000 mm/min dimensions of grinding wheel 400 x 100 x 127 mm grinding wheel speeds 1.500 - 3.500 U/min grinding spindle drive 11,00 kW total power requirement 23,00 kW weight of the machine ca. 7,50 t dimensions of the machine ca. 4,50 x 2,90 x H2,90 m Coolant system with coolant pump integrated in the hydraulic tank, exhauster.

Condition: excellent (used), Year of construction: 1991, swing diameter 400 mm Kdsdpoxyllvjfx Acwjw

Condition: ready for operation (used), Year of construction: 2001, grinding length 800 mm grinding width 500 mm workpiece height 475 mm table-size 800 x 450 mm longitudinal feed 900 mm hydr. feed stepless 30 m/min cross feed autom. 1-30 mm vertical feeds: 1-99 My rapid traverse vertical 0,3 mm/min dimensions of grinding wheel 350 x 50 x 125 mm grinding spindle drive 7,5 kW total power requirement 9,37 kW weight of the machine ca. 2,9 t Kdedpsxddr Aefx Acwjw dimensions of the machine ca. 4 x 2,7 x 2 m Hydraulic surface grinding machine with AC control for automatic surface and plunge grinding with automatic intermediate dressing and dressing compensation, including various infeed rates in the roughing and finishing cycles. Hydraulic longitudinal table movement, servo-controlled transverse movement, hardened ball screw of the highest precision, automatic lubrication of the longitudinaland transverse movement. Automatic vertical infeed via stepper motor with digital display. Dressing device for manual or automatic straight dressing of the grinding wheel. Electro-permanent magnetic chuck with automatic demagnetization and holding force control. Automatic spark-out, rapid traverse vertical adjustment. Machine dealer with own stock of 1600 m².

Year of construction: 2008, condition: ready for operation (used), General Data Measurements width 2700mm Measurements depth 6200mm Measurements height 2470mm Machine weight 8500 kg Kdsdexx D Adspfx Acwjw This Kent KGS 615 WMA1 surface grinding machine was manufactured in 2008. It features a robust table clamping area of 1500 x 600 mm, supporting a maximum load of 1300 kg. The machine is equipped with a powerful grinding spindle motor of 7.5 kW and a standard grinding wheel size of 355 x 50.8 x 127 mm. Consider the opportunity to buy this Kent KGS 615 WMA1 surface grinding machine. Contact us for more information about this machine. Application Types Grinding

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Kdsdpfxewhqplo Acwjw

Condition: good (used), Year of construction: 1974, Ref. -No.: 10159 Kdedpfx Acjxxn Udowjw Manufacturer: KELLENBERGER Type: 1000 U Year of construction: 1974 Storage location: Halberstadt Country of origin: Schweiz Grinding Length: 1000 mm Grinding Diameter: 250 mm

Condition: like new (used), Year of construction: 2020, operating hours: 18,000 h, functionality: fully functional, As-new Gear Grinding Machine KLINGELNBERG VIPER 500 W All-inclusive machine equipped for internal and external gearing Equipped with a special converter from EUR kW to US standard connection (simplified global connection) Available due to restructuring at a high-tech family-run company (no automotive production) Working Area and Capacities Max. workpiece diameter: 500 mm Max. grinding stroke: 500 mm Working area over table (min.–max.): 300 – 800 mm Distance between spindle center and table (min.–max.): 442 – 1042 mm Module (generating grinding module): 0.5 – 22 Swivel angle (min.–max.): –180° to +45° Grinding System Grinding wheel diameter (min.–max.): 221 – 350 mm Grinding worm diameter (min.–max.): 221 – 350 mm Max. grinding wheel width: 75 mm Max. grinding worm width: 150 mm Grinding spindle power: 37 kW Max. grinding wheel speed: 6000 rpm Table and Feeds Table diameter: 400 mm Table bore Ø × depth: 100 × 500 mm Max. table speed: 1000 rpm Max. axial feed: 20,000 mm/min Max. radial feed: 12,000 mm/min Max. tangential feed: 20,000 mm/min Connections and Dimensions Total connected load: 60 kVA Machine dimensions (L × W × H): 4220 × 3120 × 2526 mm Filter unit dimensions (L × W): 3490 × 2250 mm Net weight approx.: 19,300 kg Machine Configuration – VIPER 500 W Base Machine and Options VIPER 500 W base machine Preparation for internal grinding arms Internal grinding unit V5 for straight or helical internal gears Measuring system for profile, lead, and pitch of external gears Measuring system for profile, lead, and pitch of internal gears V5 Touch Trigger Phasing System Power supply with ESR voltage drop compensation 100 mm table adapter Preparation for hydraulic clamping devices Hydromechanical unit for drawbar clamping systems Grinding oil filtration system with band filter 100 Fire extinguishing system Automatic work area door Cleaning system with spray gun Crane/hoist integrated into enclosure Isolation transformer Voltage stabilizer and isolation transformer Signal light/beacon tower Software Packages Gear PRO software Software for grinding of spline shafts Software for testing of spline shafts BIAS control software for gear grinding CBN grinding wheel software ADI dressing process optimization DLC lifetime monitoring for dressing tools Flexible profile correction for grinding operations Consumables Endless filter band Assembly/disassembly aid for filter band 100 Diamond dressing rollers CVD dressing roller D200 R1 for profile grinding CVD special dressing roller for generating grinding Grinding wheels Grinding wheel D350 B60 for profile grinding Grinding wheel D350 B45 for profile grinding Profiled grinding wheel D350 B150 for generating grinding Distance rings/intermediate plates 4 intermediate plates B100 22 intermediate plates B60 Kdjdpfx Acjxx T N Towew 30 intermediate plates B45 37 intermediate plates B30 Additional Components Grinding wheel flange without intermediate plate Set of standard probes / measuring probes Additional Options Warranty extension from 12 to 24 months Closed Loop 1.0 basic version Interface for external automation

Condition: used, Year of construction: 1981, drill diameter 32 mm Kdodpfet Hwn Asx Acwow drilling length 0 mm Universal Drill Bit Grinder lots of accessories

Condition: excellent (used), functionality: fully functional, Catalogue number: 7670 TECHNICAL DATA - Track width: 340 mm - Roller width: 400 mm - Max saw blade diameter for multi-rip saw: 350 mm - Blade bore diameter: 80 mm - Max cutting height for edger: 100 mm - Max cutting height for multi-rip saw: 120 mm - Table width with clearance: 900 mm - Table length: 1780 mm Top section: - Kickback devices - Sliding pressure roller, metal - Kickback devices - Sliding pressure roller - Saw shaft - Sliding pressure roller - Sliding and pressure shaft, metal Bottom section: - Guide bar - Kickback devices - Track - Central lubrication - Infinitely variable feed speed adjustment - Electric saw shaft lifting 0.75 kW + body 1.1 kW - Feed motor 1.5 kW - Main motor 22 kW - Floating saw adjustment 0.55 kW - Lasers (not functioning, require inspection) - Extraction port diameter: 210 mm - Overall dimensions (L x W x H): 2200 x 1450 x 2000 mm - Weight: 1925 kg ADVANTAGES – German-made – Shaft with floating blade for edging Ksdpewrn Dnjfx Acwedw – Includes additional sleeve for multi-rip saw – Used multi-rip saw, condition: very good Net price: 58,900 PLN Net price: 14,000 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant currency fluctuations)

Year of construction: 2008, condition: ready for operation (used), Main Drive Number of axis 3 Kjdsxya Ekspfx Acwodw This 3-axis EASTAR ESG-1640ASD II surface grinding machine was manufactured in 2008. It features a substantial work plane of 400 x 1000 mm, ideal for various grinding tasks. If you are looking to get high-quality grinding capabilities, consider the EASTAR ESG-1640ASD II machine we have for sale. Contact us for more information. Application Types Grinding

Condition: new, Year of construction: 2025, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. Kedpfx Acjmrnk Ejwsdw The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Cutting band size [mm] 2520 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame tilt [°] 0-60 Power supply 3 phases 400V Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Dimensions with base [cm] 150x80x140 Weight [kg] gross/net - 210 / 180 kg *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: good (used), Year of construction: 2017, In good technical condition and fully functional. Year of construction 2017. Manufacturer: NS MAQUINAS Grinding machine for grinding stainless steel pipes. It is intended for the preparation of pipes for polishing and chrome plating. Kedpfx Ajxvqmdecwedw There is a complete manual for the grinder.

Condition: ready for operation (used), 440-20 CINCINNATI-MILACRON 'DE' Twin Grip Centerless Grinder Capacity – 254 mm Grinding Wheel Diameter – 609.6 mm Grinding Wheel Power – 29.8 kW Regulating Wheel Diameter – 355.6 mm Regulating Wheel Power – 1.5 kW Kedpfx Aoxwm E Secwjdw Regulating Wheel Speed – 300 RPM Approximate Weight – 14 tons Video of machine under power available

Condition: not inspected (used), Year of construction: 1989, functionality: unexamined, Grinding area: 650x350 mm, machine weight: 2500 kg, in need of repair Kdjdpfx Acexx Tctowsw

Condition: used, ABA MULTILINE 1507 A is a profile grinding machine engineered for precision, high accuracy and reliable operation. Capacities: table 2000x600 mm, grinding area 1500x600 mm, table load max 2500 kg, table‑to‑spindle centre 900 mm; travels X1500, Z750, Y900 mm. Specs: stepless feeds X 2000–35000, Z 5–5000, Y 1–3000 mm/min; wheel speeds 50–2500 t/min; wheel Ø400x60 mm, bore 127 mm; spindle motor 26 kW; supply 3x400V 50Hz; total power 35 kW; weight ≈11000 kg; size 6465x3770x3000 mm. Accessories: paper filtration, magnetic plate 1500x700 mm, lamp, switch‑cabinet air conditioner. Achieves tight tolerances; ideal for automotive, watchmaking, machine tools, aerospace, medical. Kdodpexx U N Uofx Acwew

Condition: used, • Type: 108F • Serial number: GG108F-11521 • 8 spindles Kdsdpfswrxg Tex Acwjw • Running direction: right – left • Glass thickness 3 – 30 mm • Min. dimension: 40 x 40 mm • Year of manufacture: 2005

Condition: new, Year of construction: 2025, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. Kdodpfjudi Uzjx Acwsw The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Cutting band size [mm] 2520 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame tilt [°] 0-60 Power supply 3 phases 400V Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Dimensions with base [cm] 150x80x140 Weight [kg] gross/net - 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: excellent (used), Year of construction: 1987, Grinding length: 500 mm Grinding width: 250 mm Max. workpiece weight: 250 kg Including magnetic chuck Including dressing device FROM DRESS Ksdpfx Asxwl A Aocwsdw Including complete operating manual

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 3200 mm Measurements depth 6400 mm Measurements height 2500 mm Machine weight 11000 kg Table Table load 1200 kg Tools Number of index 30 Ksdpsxuax Tjfx Acwsdw This AMADA MEISTER G3 was manufactured in 2013. A robust surface grinding machine, it's ideal for precision metalworking. Consider the opportunity to buy this AMADA MEISTER G3 surface grinding machine. Contact us for more information. Application Types Grinding

Condition: used, Year of construction: 2004, gebraucht 2004 050078 Jänner 2026, Zwischenverk Taiwan 19700 € 1 810 mm 630 mm 800 x 400 mm 800 x 400 mm 850 mm 900 mm 5 - 25 m/min 3 - 32 mm 405 mm 0,001 - 0,04 mm 1450 1/min 3,7 kW 3350 mm 1730 mm 1930 mm 2900 kg 355 x 50 x 127 mm Automatic vertical feed Electro-magnetic chuck 1 NEW grinding wheel flange 1 NEW grinding wheel Coolant system with paper filter Kjdpfxsxvivde Acwodw Automatic dressing device above the grinding wheel with NEW diamond NEW balancing stand NEW covers for the cross guides Operating manual in English with EC declaration of conformity

Condition: good (used), ABA EL 806 is a NC Surface grinding machine, built for precision, high accuracy and reliability. Capacities: table 800×500 mm; grinding 800×600×500 mm; table load 800 kg; travels X1100 Y600 Z530 mm. Wheel Ø400×100 mm (bore127), 1000–2600 rpm, spindle motor 11 kW, 3×380V; table speeds 2–35 m/min, cross‑feed ≤5 m/min, vertical feed 1–3000 mm/min (res. 0.001 mm). Accessories: diamond dresser on table, lamp, set of grinding wheels, electronic handwheel. Achieves tight tolerances; typical sectors: automotive, aerospace, machine tools, medical, watchmaking. Kdedpfjxx U Nbex Acwjw

Condition: excellent (used), Catalogue number 7807 TECHNICAL SPECIFICATIONS - Track width: 350mm - Cutting width: 350mm - Blade diameter: from 355 to 505mm - Cutting height: 10-170mm - Spindle diameter: 80mm - Table dimensions: 1900x790mm - Height from base to table: 830mm From above: - 2 rows of pawls/kickers - 2 smooth, metal glide rollers - Shaft with saw blades - 2 pressure glide rollers From below: - Guide bar - Pawls/kickers - Track - Electric height adjustment of the body - Central lubrication - Stepless speed adjustment via inverter - Feed motor: 4kW - Main motor: 75kW Ksdpfx Aoxvb Hzscwodw - Extractor spigot diameter: 2x150mm - Overall dimensions (L/W/H): 2050x1800x1800mm - Weight approx.: 3500kg FEATURES - German-made - DTR technical documentation - Used multi-blade saw - Very good condition Net price: 58,900 PLN Net price: 14,000 EUR depending on exchange rate 4.2 EUR (Prices may change due to stronger exchange rate fluctuations)

Condition: used, STUDER CT 960 is an Internal grinding machine delivering precision, high accuracy and reliable performance. Working capacities: centre height 150 mm, grinding length 150 mm, X/Z travels 400 mm, wheel diameter 250 mm, spindle hole 35 mm; B-axis +61/-91°, rotatable head -5/+275°, turret with 4 spindles. Main specs: spindle speeds 6000 / 45000 / 60000 / 90000 rpm; X/Z feeds 12 m/min; air 6–10 bar; 3x 400 V 50 Hz; total power 34 kVA; weight ~4050 kg; dimensions L 3218 × W 2256 × H 2300 mm. Equipment: coolant system, measuring probe, diamond redresser, spindle cooling, flanges for internal grinding, tool holders, 3-jaw chucks Ø100/125/160, magnetic chuck Ø125/300, tool cabinet, lamp, fire system, electronic handwheel, external grinding spindle 6000 rpm, calibration accessories. Enables tight tolerances; suited to automotive, watchmaking, machine tools, aerospace and medical sectors. Ksdpfoxx U Auex Acwedw