Used Saw Grinding for sale (9,237)

Condition: used, Year of construction: 1986, Used machine Year of manufacture: 1986 Equipment and technical data: - Cutting length: 3200 mm Hedpoy Rvk Tofx Ai Defg - Cutting width: 1250 mm - with scoring unit - Motor: 5.5 kW - with brake motor - with hydraulic lifting, lowering and tilting of the saw unit - with parallelogram safety device - with table extension 800 mm Availability: short-term Storage location: 63934 Röllbach

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec Hjdpfexq Hkuox Ai Defg capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 1998, Year 1998 Hsdpoxc Nyvsfx Ai Dsfg Control Fanuc In our opinion, the machines are in very good used condition Condition and can be viewed under power by appointment. Accesories: - Suction - Felsomat loading system An accessory package can be purchased additionally. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: like new (used), Year of construction: 2025, For sale is a used JET panel saw JTS-600XL with a maximum cutting length of 1600 mm. The machine was only briefly used for demonstration purposes in our showroom and is therefore in as-new condition. Technical data: - Motor: 230 V / 1.5 kW / 2 HP - Saw blade speed: 4000 rpm - Saw blade diameter / bore: 250 / 30 mm - Saw blade tilt: 0° – 45° - Max. cutting depth at 0°: 80 mm - Max. cutting depth at 45°: 54 mm - Max. cutting width at rip fence: 610 mm - Table dimensions: 800 x 350 mm - Table extension: 415 x 350 mm - Table widening (right): 800 x 270 mm - Precision sliding table: 1600 x 255 mm - Max. cutting length: 1600 mm - Machine dimensions: 1650 x 2200 x 1100 mm Hodpey Nm H Ajfx Ai Dofg - Weight: 157 kg Scope of delivery: - Sliding table 1600 x 255 mm - Circular saw blade Ø 254 x 30 x 3 mm - 36 TCT teeth - Parallel fence - Support table 460 x 600 mm with extendable crosscut fence 2200 mm - Extraction port Ø 100 mm The machine is located in A-8561 Söding and can be inspected during our business hours at any time. Subject to prior sale! Related terms: saw, circular saw, panel saw, format Reference: R-D1618

Condition: excellent (used), I sell a massive band saw for cutting metal in bdb condition. Hjdsu Udriepfx Ai Defg

Condition: excellent (used), Year of construction: 1966, I sell a circular saw made in Germany. Company Eisele model vms II in good condition Hjdpfx Aievbwfns Dsfg

Condition: good (used), I am selling a Rema DS 12/ST in good condition. Hfsdpfx Aieu Uvv Tj Djg

Condition: excellent (used), Year of construction: 1982, Table saw ULMIA 1710s Year of construction 1982 Hsdsufgnzjpfx Ai Dofg Tilting angle 45° Cutting length on cart 750mm Blade diameter max 250mm. Cutting height 75mm. Cutting width between the saw and the attachment 650 mm Scale carriage for cutting angles Table size 1000x630mm

Condition: used, Double-sided bench grinder GREIF Type D 20-5-3 Grinding wheel diameter: 200 mm Grinding wheel width: 25 mm Grinding wheel speed: 3000 rpm Motor power: 0.55 kW Hfodpfx Aijy Sbw Ij Dsg Power supply: 380 Volt, 50 Hz - Cast iron base (original) The material rest at the left grinding wheel is missing.

Condition: used, Cylindrical Grinding Machine: Schaudt Model: RFH 500 Condition: used Centre height: 100 mm Hsdpfxoy R Dlfe Ai Defg Centre distance: 500 mm Spindle speeds: 2225 / 2500 / 2825 rpm Grinding wheel diameter min./max.: 200 - 300 mm Weight, approx.: 1900 kg Equipment: - Manual & automatic operation - Coolant system - Machine lamp - Emergency stop button - Machine leveling feet

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, overall weight: 1,700 kg, Equipment: documentation/manual, Universal machine COMEC RCG 900 for reconditioning cylinder heads, engine blocks, drums, and discs for cars and trucks. Planing width: 320 mm Planing length: 900 mm Maximum working height: 370 mm Maximum table travel: 1200 mm Feed rate: 0.8 - 450 mm/min Maximum brake drum diameter: 1400 mm Head motor: 5.5 Hp Brake machining speeds: 35-70-50-100 rpm Hfodey Rffyjpfx Ai Dsg Approximate weight with accessories: 1700 kg Dimensions: 2300 x 790 x 1700 mm (h)

Condition: excellent (used), functionality: fully functional, Multi-Blade Saw Brodpol WP 100 Hfodpoy Icwhsfx Ai Deg Maximum saw blade diameter: 350 mm Largest distance between outer blades: 320 mm Minimum cutting thickness: 15 mm Maximum cutting thickness: 100 mm Maximum cant width: 500 mm Minimum cant length: 550 mm Feed speed adjustable via inverter: 26 m/min Main motor power: 30 kW

Condition: used, Year of construction: 2000, functionality: fully functional, Used Cylindrical Grinding Machine Reckord M 1432 B The Reckord M 1432 B is a high-performance universal cylindrical grinding machine that combines maximum precision with robust construction. With a minimum infeed setting of just 0.0025 mm and outstanding roundness accuracy, it is ideal for demanding grinding tasks in both single-part and series production. Your advantages at a glance: Maximum precision: Minimum grinding wheel infeed of 0.0025 mm ensures top surface finishes and form accuracy. Exceptional flexibility: External, internal, and face grinding – swiveling workhead (+90° / -30°) and table (+3° / -6°) for tapers and complex geometries. Robust construction: Heavy-duty machine bed weighing approx. 4,000 kg for maximum rigidity and vibration damping. Powerful drive: 4 kW grinding wheel motor for rapid stock removal and short machining times. Ergonomic operation: Clearly arranged controls for rapid operator familiarization and intuitive handling. Technical Data Manufacturer: Reckord Hfodjyxgldspfx Ai Deg Model: M 1432 B (Model 1000) Type: Universal cylindrical grinding machine Centre height: 180 mm Max. grinding length: 1000 mm Max. grinding diameter: 315 mm Max. workpiece weight: 150 kg Workhead speeds: 40, 72, 128, 228 rpm Grinding wheel dimensions: 400 x 50 x 203 mm Grinding motor output: 4 kW Total power consumption: 7.8 kW Machine weight: approx. 4,000 kg Machine dimensions (L x W x H): 3240 x 1760 x 1680 mm Colour: Blue (as existing) Condition: Used, fully checked and operational Availability: Immediately ex stock Stockstadt Additional Information Scope of delivery: Cylindrical grinding machine Reckord M 1432 B including standard accessories as per the operating manual. Fully checked and operational. Technical documentation: Supplied in German. Optional services: Commissioning and training by experienced technicians, maintenance contract, as well as financing and leasing options on request. Inspection: The machine can be inspected by appointment in Stockstadt am Rhein.

Condition: used, Year of construction: 2002, functionality: fully functional, Homag Profi Line CHF 51/32/32 Panel Saw - Year of manufacture: 2002 - Cutting width: 3200 x 3200 - 3 tables with air curtain - Saw projection: 102 mm - Cutting height: 85 mm Hedpfsx Ey Nvox Ai Defg - Main blade 400 mm - Main motor 11.2 kW (15 HP) - Incisor blade with independent motor

Condition: used, Year of construction: 1994, Cutting length 5300 mm, cutting height 2200 mm, cutting height 80 mm, manual feed, measuring system: scale, free-standing supports, rated current 21 A. Storage location: Nattheim. Hfedpfx Aijytrhrs Dog

Condition: used, Year of construction: 1996, max. blade length: 4720 mm, motor power: 2.2 kW, roller diameter: 600 mm, max. cutting height: 395 mm, max. cutting width: 585 mm, tiltable table: yes, column side: left, fence: usable on both sides, blade guide position: top and bottom, blade guide: roller guide, design: stationary, weight approx.: 300 kg, dimensions: 1115 x 670 x 2115 mm. Storage location: supplier. Hsdjy Rz Htspfx Ai Djfg

Condition: new, Year of construction: 2026, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle 0º ø220 260 x 140 Hfodpfsudi Unox Ai Djg 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: good (used), Code: 0385 Brand: FESTOOL Model: KS 120 EB Hedpfx Aijy Sa Aie Dofg Precision radial mitre saw for wood, profiles, panels, beams, frames, joinery, furniture and various, complete with support table and 2 side stops System FAST FIX for quick blade change Precision double-column guide on 2 ball bearings Dual-line laser for precise cut marking Compact, lightweight design for easy transport Variable speed 220 Volt Blade diameter 260 mm Hole 30 Motor power 1600 W No-load speed 1400/3400 rpm Cutting depth 90/90° mm 305 x 88 Cutting depth 45/90° mm 215 x 88 Contoured profile 45/90° diagonal cut 168 mm Tilt angle 47/47° Bevel angle 50/60° 4-legged support table 2 side extension and support stands with measuring rod 1 workpiece clamping vice Dust extraction connection diameter 27/366 Overall dimensions machine mm 950 x 800 x 650 h Overall dimensions with table and stands mm 3300 x 850 x 1500 h Mitre saw weight kg 24

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Hjdpfx Aiocuntzs Defg Art.no.: 3680013 Condition: New machine Cutting range (round): 230 mm cutting speed: 35/70 m/min standard equipped with: - horizontal vice - length stop (600 mm) - Monitoring of saw band tension, electromechanical - chip clearing brush - coolant device - operating instructions

Condition: reconditioned (used), Year of construction: 1984, Graver grinding machine Make: Deckel Model: S0E Year of manufacture: 1984 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey Mach. no.: 84-5532 with guarantee Accessories: - Machine stand - Microscope with support - Integrated dust extraction - Grinding wheel with flange - Pulling tool - Operating instructions Incl. installation of an on/off switch with undervoltage release to implement restart protection e.g. in the event of a power failure or when the power plug is pulled Hodpoqctp Sofx Ai Dofg incl. production of a mounting adapter plate - Used, as seen -

Condition: refurbished (used), Year of construction: 1988, Graver grinding machine Make: Maschinenfabrik Baden-Baden Model: FSS Year of manufacture: 1985 - overhauled, repainted RAL7012 basalt gray, RAL 7035 light gray Machine no.: 2992 Warranty: 12 months single layer from delivery, on the mechanics overhauled by us. The electrics and electronics are excluded, as they have only undergone a functional test. For machines located outside our northern Bavarian sales area, travel costs are to be borne by the customer. Accessories: - Grinding wheel with flange - Operating instructions incl. new electrics On/off switch in new housing Hjdetqdqgjpfx Ai Defg with undervoltage coil to realize the restart protection z. e.g. in the event of a power failure or if the mains plug is pulled out Used as seen The machine corresponds technically the state of the year of manufacture at that time.

Condition: reconditioned (used), Cutter Grinder Make: harich (Deckel) Model: SSM (S0E) Refurbished with CE certification with warranty Accessories: - Machine stand Hedpfx Aijx A U Rgj Dsfg - Integrated dust extraction - Grinding wheel with flange - Dressing tool - Operating manual incl. new machine electrics according to current safety regulations incl. new circuit diagram incl. CE documentation incl. CE labelling incl. CE Declaration of Conformity

Year of construction: 1985, condition: refurbished (used), Cup grinding machine Make: GMN Hsdegayvqopfx Ai Djfg Model: MPS E-200 Year of manufacture: 1985 Machine No.: 9701 with warranty Accessories: - Grinding wheel Ø 200 with flange - Dressing diamond - lateral dresser - magnetic clamping plate 250 x 150 mm (pole pitch: 2 mm) - wet grinding device - instruction manual - used, as seen -

Condition: new, Drill grinding machine Make: MOTOM Model: BSM 13 DUO Grinding range 2-13 mm Paintwork gray Areas of application: Grinding cone shell Sharpening relief grinding Scope of delivery: Hfedpfx Aieguadns Deg CBN grinding wheel for HSS tools Pliers set from 2-13 mm increasing by 1.0 Plexiglas protective shield

Condition: reconditioned (used), Steel grinding machine Make REMA Model DS 07/ST version with pole-changing motor 0,22/0,37 kW 1450/2900 rpm year of manufacture unknown Ma.-No. 022857 Equipment: - Reversing switch right/left rotation - column design with chip tray - Wet grinding device - 2 pcs. support table ATS (left) inclinable from -5° to +15 and with spring rockers - 2 pcs. angular stops - adjustable support table ATK (right) for grinding chip grooves - steel holder for support table ATK 360° rotatable, swiveling, with height adjustment and knurled screw for adjustment of chip depth - enlarged protective hood (left) with silicon carbide cup wheel Ø 175 mm with mounting flange - protective hood (right) Hodpehvu Tmefx Ai Defg for grinding wheels Ø 125 mm with mounting flange - Operating instructions used as seen, without warranty