Used Saw Milling for sale (15,579)

Condition: excellent (used), machine/vehicle number: 77WSX22305E5A-135, BENZ - MONO WSX 05 - 90° angle head Mounting: HSK-A100 Collet: ER25-A (clamping range: 0.5–16 mm) Max. torque: 30 Nm Max. speed: 8,000 min⁻¹ Transmission ratio: 1:1 Angle head: 360° adjustable Weight: approx. 8 kg Itodpfxox I N Ere Aanjr The angle head was used on a MAG HÜLLER HILLE - NBH6+ but can also be adapted or fitted to other machines.

Condition: good (used), functionality: fully functional, travel distance X-axis: 1,000 mm, For sale is a milling machine of the Niigata brand and type U-1000 The machine is fully functional and ready for immediate use Technical data Work table 360x1500 mm with 4 T-slots Longitudinal travel X 1000 mm Transverse travel Y 500 mm Itjdpfxjr Izbrj Aanor Mounting: SK 50 Vertical travel Z 430 mm Rapid traverse 2 m / min. Spindle holder SK 50 Spindle speeds 500 - 2000 rpm. Max. Table load 800 kg Vices and magnetic plate not included in the offer, can be offered additionally. On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 2024, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2024 Control : Siemens 840 Dsl - Operate Turning diam. : 400 mm Turning length : 1100 mm Main spindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):17 kW Torque (max.):345 Nm Clamping cylinder:Hollow clamping cylinder Bar capacity:67 mm Workpiececlampig:3-Jawchuck, Schunk Rota THW 315-104 Sub spindle: Technology:Motorspindle Itjdox Ih Rtopfx Aanor Speed:5,000 rpm Power (max.):17 kW Torque (max.):345 Nm Clamping cylinder:Partially hollow clamping cylinder Workpiececlamping:3-Jawchuck, SMW Autoblok 250 BB Movement in Z:1.200 mm Thrustforce (Tailstockfunction):2,5-6 kN Tool carrier (X/Y/Z/B): Technology:Travelling column with millingspindle Speed:12.000 rpm Power (max.):10,5 kW Torque (max.):90 Nm Taper:HSK-A63 Swivelrange in B:+/- 120° In general: Toolmagazine:Chainmagazine, 60 Stations Movement in X/Y/Z:750/200/1.100 mm Rapid travers in X/Y/Z:40 m/min Equipment: Positionsensor:Direct scales in X/Y Chip disposal:Chip conveyor Coolant supply:Internal coolant with Paperbeltfilter and Highpressure, 20 bar Workpiecemeasurement:Renishaw RMP 40 Toolbreakagecontrol:Blum Z-Nano Toolmonitoring:Easy Tool Monitor Automation:Automationpackage (Automatic Door, electrical Interface Robo2Go) Emulsion mist separator:Meachanical extraction, AFS 1100 :Set-up operation. Electronic handwheel Technology cycle:Alternating speed Digital Manufacturing:IoT Connector Further Equipment:Spindlechiller, Rinsing pistol

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1000x1500x1800 mm Weight 570 kg Itedpov A Hgdsfx Aaner Total power requirement 3 kw

Condition: excellent (used), Year of construction: 1986, CNC Machine: Heidenhain TNC 155 Table dimensions: 860 x 380 mm Isdpox H Sdzjfx Aanetr Travel paths: X-axis: 510 mm Y-axis: 400 mm Z-axis: 480 mm Tool magazine: 16 positions Tool holder: BT 40 Weight: 3,500 kg Year of manufacture: 1986

Condition: excellent (used), Year of construction: 1982, Table saw ULMIA 1710s Year of construction 1982 Tilting angle 45° Cutting length on cart 750mm Blade diameter max 250mm. Cutting height 75mm. Cutting width between the saw and the attachment 650 mm Scale carriage for cutting angles Itsdpfeufgnzjx Aaner Table size 1000x630mm

Year of construction: 2019, operating hours: 1,650 h, condition: ready for operation (used), Additional Equipment Iedpfxsx D Irte Aanstr Spray unit capacity: approximately 12 liters / Hydraulic oil capacity: approximately 5 liters / Coolant capacity: approximately 180 liters This MEBA MEBAmat 434 Metal Band Saw was manufactured in 2019. It features a band saw drive power of 7.5 kW and a cutting speed of up to 150 m/min. The machine can handle round material up to Ø434 mm and square material up to 434 × 434 mm. Weighing approximately 4000 kg, it's designed for robust performance with a hydraulic clamping system. If you are looking to get high quality cutting capabilities consider the MEBA MEBAmat 434 machine we have for sale. Contact us for more information. Application Types Sawing

Condition: used, Year of construction: 2005, Technical Data: Cutting Capacity: 90° round: 260 mm 90° flat: 300 x 260 mm 90° square: 260 x 260 mm +45° round: 200 mm +45° flat: 200 x 240 mm +45° square: 200 x 200 mm +60° round: 165 mm +60° flat: 160 x 120 mm +60° square: 150 x 150 mm -45° round: 200 mm -45° flat: 200 x 240 mm -45° square: 200 x 200 mm Shortest remnant length: 35 mm Total connected load: 2.0 kW Saw motor, frequency controlled output: 1.5 kW Infinitely variable cutting speed (frequency controlled): 20 – 110 m/min Saw blade dimensions: 2910 x 27 x 0.9 mm Dimensions and Weight: Length, approx.: 1020 mm Width, approx.: 1830 mm Height (upper section lowered), approx.: 1460 mm Height (upper section raised): 1900 mm Material support height: 950 mm Total weight, approx.: 510 kg Equipment: - Carbide saw blade guides, replaceable - Mechanical material clamping - Hydraulic feed for cutting - Mechanical saw blade tensioning - Saw blade cleaning by a driven, easily replaceable wire brush Itjdpfx Aajx Irx Ijnor - Coolant system: feed via 1 coolant nozzle and 1 coolant hose, tank capacity approx. 45 l, pump performance 16 l/min

Condition: used, Year of construction: 1995, x-travel 650 mm y-travel 410 mm z-travel 410 mm Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 tool taper SK 40 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Ijdpfx Aox Iwg Reanjtr Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 9000x1400x1680 mm Weight 1600 kg Total power requirement 7,5 kw - Max process length 2.5 m (Can be customzied)- Max process width 200 mm -Min process width 30 mm- Max process thickness 1O0 mm (Can be customzied)- Saw blade 405/120/30/3 , 455/120/30/3 mm- Spindle motor 7.5 KW / 400 V- Machine size 9000 mm x 1400 mm x 1680 mm- Machine weight 1600 kg Itedpfx Aaev A E Ndsnjr

Condition: excellent (used), Catalogue number 7248 Iedpsrf Tahofx Aanotr TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm - spindle diameter: 40 mm - max. tool diameter: 220 mm - worktable (length/width): 420x1010 mm - motor: 11 kW - 2 pneumatic workpiece clamps - extraction port diameter: 180 mm - dimensions (L/W/H): 1500x1010x1560 mm - weight: 689 kg ADVANTAGES – German manufacture – Used milling machine, in very good condition Net price: 31,900 PLN Net price: 7,590 EUR depending on exchange rate of 4.2 EUR (Prices may change in case of significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 500 mm, - Heidenhain TNC 410M cnc control - toolchanger for 23 tools - chip screw Itjdsx Izwtspfx Aaner - coolant device Technische Daten / technical details: Verfahrweg X / X-Travel 650 mm Verfahrweg Y / Y-Travel 410 mm Verfahrweg Z / Z-Travel 500 mm Tischgröße / table size 770x400 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 10000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 23 fach Eilgang / rapid feed 36/36/30 m/min Gewicht der Maschine ca. / weight 4300 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Year of construction: 2019, condition: ready for operation (used), Main Drive Spindle speed range 3500 Table Table load 6500 kg Additional Equipment Shredder for waste Tiltable side pressure rollers in the cross-cutting area Itjdpjx D Ngrsfx Aanor Vibration conveyor for waste after longitudinal cutting Tiltable grippers in the longitudinal cutting area FLEXCUT 02 with 2 movable sets and 3 double grippers in each set Label editor with barcode printer capability Online diagnosis This SCM Gabbiani A3 130 panel saw was manufactured in 2019. It features a longitudinal cutting range of 3200 mm and a cross-cutting range of 2440 mm, with a main saw motor power of 18 kW and a maximum saw blade diameter of 430 mm. The machine supports a maximum panel size of 3200 x 2440 mm and can handle a loading weight up to 6500 kg. Consider the opportunity to buy this SCM Gabbiani A3 130 panel saw. Contact us for more information. Application Types Sawing (Wood)

Condition: used, Year of construction: 2006, Cross-profile milling machine Comec Type FRO1000 for precise machining of cross profiles and form milling on solid wood and wood-based materials. The robust construction and the stable milling head enable consistently exact profiles in batch and single-piece production. working width: about 1,000 mm Spindle Ø: 40 mm feed: Pneumatic Ijdpox Ivk Uofx Aanstr

Condition: used, Year of construction: 2008, x-travel 600 mm y-travel 450 mm z-travel 300 mm spindle tunring speed 42.000 U/min In our opinion, the machine is in good used condition and can be inspected under power by appointment. Equipment: - Extraction system, Keller Itjdpfx Aaox Iwg Dsnsr - Pallet system, Röders RC 2 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, rotational speed (min.): 1,500 rpm, rotational speed (max.): 9,000 rpm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1997 Control system: Heidenhain Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±90° Clamping table Length x width x height approx. 4,500 x 2,000 x 400 mm T-slots longitudinal 18H12 T-slot spacing 250 mm (The zero-point clamping plates shown and additional clamping devices are not included in the scope of delivery!) Itsdpox Iugujfx Aaner Milling head Spindle power: 12 kW Spindle speed: max. 9,000 rpm Tool holder: SK40 / ISO40 Linear axes drives Feed speed X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Space required by machine (without control cabinet): approx. 5,600 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 14,000 kg Condition of the machine Fully functional, the machine is delivered without enclosure and must be enclosed in a CE-compliant manner by the buyer. Note: The tool changer, vacuum table including pump, and extraction unit can be purchased at an additional cost. However, they are NOT included as standard equipment with the machine!

Condition: excellent (used), functionality: fully functional, Catalogue number 7364 TECHNICAL DATA - max. workpiece height: 160 mm Iedpfjudif Tex Aanotr - spindle working length: 250 mm - spindle diameter: 40 mm - max. tool diameter: 220 mm - working table (L/W): 410x1000 mm - motor: 11 kW - 2 pneumatic material clamps - extraction port diameter: 160 mm - dimensions (L/W/H): 1070x1260x1400 mm - weight: 650 kg ADVANTAGES – Made in Germany – Additional set of cutters + copy template – Not repainted – Used milling machine, in very good condition Net price: 33,900 PLN Net price: 8,070 EUR according to 4.2 exchange rate (Prices may change with significant exchange rate fluctuations)

Year of construction: 2025, condition: new, Multifunctional CNC drilling and milling center for all types of profiles. Suitable for processing aluminum and PVC profiles for doors and windows. The multifunctional CNC (Computer Numerical Control) drilling and milling center is a high-tech machine designed to perform a wide range of metalworking operations. This type of equipment combines functions such as drilling, milling, reaming, tapping, and sometimes even turning, providing high precision and efficiency in machining various materials including metals, alloys, wood, and PVC. Key Features and Advantages - High precision and repeatability: Thanks to digital control, CNC centers can perform complex, multi-stage operations with micron-level accuracy. - Versatility: Multifunctional centers allow rapid reconfiguration for different operations and can machine parts of different sizes and shapes. - Automation: These machines are automated, which significantly reduces the need for manual intervention and the risk of errors. - Reduced production costs: By consolidating multiple operations into a single machine, equipment, time, and labor costs are optimized. - Capability to process complex shapes: CNC centers can machine intricate geometrical parts that would be difficult or impossible to achieve with manual machines. Main Components - Control system (CNC): Manages all movements and operations of the machine according to the pre-set program. - Worktable and spindle: The area where the workpiece is mounted, and the spindle that drives the tool. - Tool magazine: Stores and manages the tools for automatic changes during operation. - Cooling and lubrication system: Maintains optimal working temperature and protects both tools and material. Applications Multifunctional CNC centers are used in various industries, including automotive engineering, aviation, electronics, and mechanical engineering, wherever high-precision machining of parts and complex geometrical shapes is required. These machines deliver high productivity, reduced setup time, and significantly improved quality control, making them indispensable for modern manufacturing processes. Ijdow T Sldepfx Aanjtr Brand new!!!

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 1800 kg Iodpfx Aajx D H Tijnjtr This SCHÜCO PDG SET was manufactured in 2008. A robust circular metal saw featuring a motor speed of 2800 rpm and a saw blade diameter of 500 mm. Weighing 1800 kg, it is fully functional and has been regularly maintained. Available for viewing under power on site. Contact us for further details regarding this machine. Application Types Sawing

Condition: used, Year of construction: 2011, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm Control SIEMENS SINUMERIC 840D table-size 2.900x700 mm table weight 2.150 Kg tool adaptor SK 40 DIN 69872 Itedpsv Da T Hefx Aanor workpiece length - max. 300 mm workpiece weight 6 kg workpiece dia. 80/130 mm 30 fach main drive 18,4/14 kW speed 14.000 mm/min rapid traverse 40 m/min feed 40 m/min Machine on 18.859 h Spindle hours 5.666 h internal coolant system feed 40 Bar/600 l Chip coveyor inkl. Machine on 19.230 Spindle hours 5.998 h total power requirement 55 kW weight of the machine ca. 14.520 kg dimensions of the machine ca. 10.280 x 7.230 x 3.042 mm Acceleration in the axis 4 m/s2 -Cleaning gun -Portable handwheel -Direct measurement system

Condition: used, Year of construction: 2001, Technical details: turning diameter: 500 mm turning length: 1000 mm control: Siemens 840 D spindle: 42 / 28 kW spindle turning speed - stepless: 31 - 4000 1/min max. torque on the spindle: 345 Nm c-axis: 360000 x 0,001° feeds -stepless-: mm/min rapid traverse: mm/min turret stations / rotary tool stations: 12/12 VDI 40 RPM of rotary tools: 2000 1/min diameter of quill: 90 mm quill stroke: 80 mm tailstock quill taper ISO: SK 30 Tailstock Travel: 600 mm Itodpfx Aex I Ir Reanjr Power rotary tools: 3,5 kW : 22,5 Nm Rotary tool holders: 4 ax./ 4 rad. spindle passage: 66 mm total power requirement: 30 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 8x 3 x 4 m Accerories Power Chuck Programmable Tailstock Chip conveyor

Condition: used, functionality: fully functional, – hydraulic blade stroke TECHNICAL SPECIFICATIONS: – motor power: 5 kW – max. blade diameter: 500 mm – max. cutting height: 145 mm – max. cutting width: 750 mm – hydraulic blade stroke – overall table size: 1080 x 780 mm – height from base: 750 mm – infeed roller table: 260 cm / outfeed roller table: 240 cm – roller width: 510 mm – roller diameter: 80 mm Itedpfxjx Ekm So Aaner – distance between rollers: approx. 400 mm – machine dimensions (L/W/H): 145 / 115 / 130 cm – weight: ~ 300 kg

Condition: excellent (used), CATALOG NUMBER 6056 TECHNICAL DATA - Max workpiece height: 250mm - Spindle working length: 260mm - Spindle diameter: 40mm - Worktable (LxW): 630x360mm - Guide - Motor power: 9.3kW - 2 pneumatic material clamps - Extraction port diameter: 2x120mm - Air requirement: 8 bar - Dimensions (LxWxH): 1370x980x1620mm - Weight: 450kg – Unpainted – 2 cutters included – Italian-made – Used milling machine, in very good condition Itedpfx Ajgig Dysanjr Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: new, Year of construction: 2024, Used machine Year of manufacture: 2024 Condition: as new, machine is unused Features and technical specifications: Cutting height: 2200 mm Cutting length: 5100 mm Cutting depth: 60 mm Saw blade diameter: 250 mm Saw blade speed: 4800 rpm Scoring blade diameter: 80 mm Scoring blade speed: 8500 rpm Stops: 2 pcs Sound pressure level: 89.2 dB(A) Lower material support with metal rollers Automatic retractable slatted frame Vertical digital measurement display Horizontal digital measurement display Panel positioning on movable rollers without lifting Dimensions and weights: Height: approx. 3100 mm Length: approx. 6300 mm Width: approx. 1800 mm Weight: approx. 800 kg Dust extraction connection: Extraction port diameter: 1 x 100 mm Air requirement for extraction: min. 1000 m³/h Air velocity: min. 20 m/s Electrical specifications: Drive motor power: 3 kW Connection voltage: 400 V Line frequency: 50 Hz Scope of delivery: Saw blade Ø 250 x 30 x 3.2 mm Z80 trapezoidal Scoring blade Ø 80 x 2.8-3.6 mm Z20 Availability: short notice Itedpfxsx H Dabs Aaner Stock location: Röllbach

Condition: used, Year of construction: 1997, functionality: fully functional, cutting width (max.): 610 mm, saw blade diameter: 600 mm, type of input current: three-phase, - Year of manufacture: 1997 - Two pneumatic stops TECHNICAL SPECIFICATIONS: Ijdox Ekmrjpfx Aanjtr - Saw blade diameter: 600 mm - Max cutting width: 610 mm (with element height 30 mm) - Max cutting height: 160 mm (with element width 380 mm) - Motor power: 7.5 kW - Sawdust extraction outlet: 2 x 100 mm - Two pneumatic stops for cutting to set length - Hydraulic element clamping and blade movement - Stepless cutting speed adjustment - Infeed table: 1000 mm / 470 mm D-90 mm - Outfeed table: 1500 mm / 500 mm D-60 mm - Spindle diameter: 30 mm - Blade rotational speed: 2800 rpm Transport dimensions - 280x165x140 cm - Weight: 600 kg