Universal Milling Machine

SHW UF 21

Condition: used, Year of construction: 1976, Machine type: Universal milling machine Manufacturer: SHW Model: UF21 Year of manufacture: 1976 Control type: NC Gjdpfexwnm Dsx Anxjit Country of origin: Germany X-axis travel: 1050 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Spindle taper ISO: SK40 Spindle head swivel right-left: 90° Quill travel: 180 mm Spindle speed range: 36–1800 rpm / 18 steps Feed rate X+Z: 0.3–1800 mm/min Feed rate Y: 0.3–900 mm/min Rapid traverse X/Z: 1800 mm/min / Y: 900 mm/min Table size: 1200 x 550 mm Total power requirement: approx. 10 kW Estimated weight: 4400 kg Machine dimensions (L x W x H): approx. 3.1 x 2.5 x 2.2 m Spindle motor power: 6.8 kW

Condition: good (used), Year of construction: 1994, functionality: fully functional, feed length X-axis: 1,050 mm, feed length Y-axis: 360 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,050 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 500 mm, overall weight: 3,000 kg, Equipment: documentation/manual, Tiger FO 135 universal milling machine Description of the machine The machine was purchased new in 1994 and has only been in operation for a few hours. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition. good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a digital readout for the 3 axes, which makes it possible to work with cutter compensation and recurring measurement machining. Operating instructions are included with both the machine and the digital indicator. Technical specifications Gijdpsrqwbisfx Anxet - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic traverse path: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds ➢ Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed power: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ Direct current motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast feed ➢ Lengthwise and crosswise 3,000 mm/min Vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low-voltage electrical controls on the pushbutton panel of the side arm - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Machine dimensions (for transportation) ➢ Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accessories - Counter supports for cutting shaft - Cutting shaft ø32 mm Tiger FO 135 universal milling machine Description The machine was purchased new in 1994 and has only had a few hours of operation. The milling machine is fully functional. Axis movements are smooth and the guides are in good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a DRO for the 3 axes, which offers the possibility of working with milling compensation and recurring measurement processing. Both the machine and the DRO come with operating instructions. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic travel: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed services: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast forward ➢ Longitudinal and transverse 3,000 mm/min ➢ vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low voltage electrical controls on side arm push button panel - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Dimensions of the machine (for transport) Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accesories - Counter supports for cutting shaft - Cutting shaft ø32 mm

Condition: good (used), machine/vehicle number: RTT HAU T3, Used rotary table polishing machine Manufacturer: Hau Gedjh Ug Ulspfx Anxeit Rotary table with 6 working spindles and 3 polishing stations with high pressure guns, 5,5 kW motors, control cabinet

Year of construction: 2025, condition: new, functionality: fully functional, High Speed · High Precision · High Stability The VS series high-speed laser tube cutter for small pipes has arrived! This machine features a high-precision chuck system designed specifically for tube cutting. With excellent sealing and dust protection, it delivers clamping accuracy within ≤0.1mm ideal for ultra-precise small tube processing. The chuck rotates up to 160 RPM, with acceleration reaching 1.5G, easily enabling high-efficiency processing of small-diameter tubes. easily enabling high-efficiency processing of small-diameter tubes. it supports true ultra-short tail cutting saving cost from the very beginning. Available in 3000W and 6000W, Handles square and round tubes from 10mm to 120mm in diameter, Also capable of cutting angle steel, channel steel, and I-beams A true all-rounder for small pipe fabrication. Giedpfx Anowwzudoxjt Supports automatic or semi-automatic loading Effortlessly enables smart and automated processing. One machine replaces three workers — A powerful and efficient tool for small pipe manufacturing!

Condition: used, Year of construction: 2004, functionality: fully functional, Amada HFE 220- L Gsdpfxouiwype Anxeit Year of construction 2004 Laser height adjustment Working width 3100mm pressing force 220 tons with many tools

Condition: used, Year of construction: 1984, x-travel 2500 mm y-travel 750 mm z-travel 1000 mm table surface area 2550 x 800 mm spindle taper SK 50 control HEIDENHAIN, TNC 150 B weight of the machine ca. 16 t Gjdpfxstqqnwe Anxoit

Condition: excellent (used), Free-standing aluminium silo on foot ring (previously used as a milk powder silo) – used – designed for a bulk density of 0.65 kg/dm³ Volume: 94,000 litres Manufacturer: P+W Metallbau Quantity: 1 Diameter: approx. 3,000 mm Godpfx Asi E Hnyonxjit Cylindrical height: approx. 17,000 mm Material: AlMg3 Bulk density: 0.65 kg/dm³ Upper head roof pitch: 15° Equipment and connections: Upper head: 1 x access manhole DN 600 with cover 1 x vent nozzle DN 300 with hood 4 x flange DN 100 2 x flange DN 150 Shell: 1 x access door, approx. 850 x 2000 mm with ventilation slots 1 x flange DN 50 for sensor probe 6 x pipe holders for fill pipe (fill pipe not included) 6 x brackets for access ladder (ladder not included) Various pipe penetrations in the area of the lower supporting ring The silo has a 60° cone at the bottom with a vibrating floor (DN 1500). The currently installed measuring and control technology is included in the price, but no warranty is given for its functionality! Otherwise as per images and drawing.

Year of construction: 2001, condition: ready for operation (used), Max. cutting force: 220kN, laser power: 3200W, nitrogen connection: 30bar, oxygen connection: 20bar, connected load: 76kVA, operating hours at the beginning of 2025: 67,766h, with Trumpf TLF 3200 laser and RIEDEL L 15/21 TR3/19.00 cooler, refrigerant: R134a, filling weight: 11.5kg, high pressure: 20.2bar. Tools additionally available. An on-site inspection is possible. Gedpfx Anew Uk A Rjxjit

Condition: as good as new (ex-display), A demonstration belt grinder WIEGAND with two belt speeds ideal for steel and stainless steel belt dimensions: 2000 x 150 mm belt speed: 18/ 37 m/sec Gisdpfx Anopgmufjxet power: 2,2/ 3,8 kW 400V/50Hz weight: 110 kg Tech. Data and dimensions: Errors excepted

Condition: used, Year of construction: 2018, Opportunity to buy an excellent Bystronic ByStar fiber laser with 4000 x 2000 mm working area and 6000W laser output (Dynamix edition F6000). Including: V1 cutting head (first version) NCT zle Changer 64 Pos. Detection Eye Dust extraction system 1 Basic Machine 1.1 ByStar Fiber 4020 Dynamic Edition F6000 1.2 Scope of Delivery 1.3 Safety and Guidelines 1.4 Complete Documentation 1.5 Power Cut Fiber 1.6 ByPos Fiber 1.7 Cut Control Fiber 1.8 Scanning 1.9 Swap Table Gisdpsx Tcvnjfx Anxot 1.10 Laser Source 1.11 Cooling Unit 1.12 Tank Heater 1.13 Machine Control and User Interface 1.14 Uninterruptible Power Supply 1.15 Condition Messenger 1.16 Maintenance Messenger 1.17 Cutting Plan Editor 1.18 Restart Manager 1.19 System Manager 1.20 Cutting Parameter Assistant 1.21 OPC Interface Cutting 1.22 Handheld Control Unit 1.23 Electrical Connection 1.24 Compressed Air (Machine, Laser Source, Cooling Unit, Dust Extraction System) 1.25 Material Specification 1.26 Cutting Gas 1.27 Environmental conditions 1.28 Structural requirements Immediately available and can be inspected under power upon appointment. Working dimensions: 4000 x 2000 mm Laser output: 6000W Power On hours: 49086h Cutting hours: 18659h