Used Planer Blades for sale (6,468)

Condition: new, planing width: 335 mm, EXCHANGEABLE BLADES FOR PLANER MANUFACTURER KANEFUSA - FOR MARUNAKA PLANER WITH REVERSIBLE BLADE SYSTEM Ksdpfoqxticex Aabonc LENGTH 335 MM SET OF 2 PIECES

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Kodpfx Ajxligujabenc Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2023, functionality: fully functional, CHILLER UNIT 290 kW – 2 separate refrigeration circuits, shell-and-tube heat exchanger, R32 Cooling capacity: 290 kW at 7/12°C and 35°C ambient temperature Shell-and-tube evaporator for efficient heat transfer and compact design Low-GWP refrigerant R32 Four compressors in two separate refrigeration circuits for high operational reliability and flexible load distribution Low-noise design thanks to optimized sound insulation Completely framed compressor enclosure for efficient protection, easy maintenance, and reduced noise emission Knsdpfsu Au I Tsx Aabjc Winter package allowing operation at ambient temperatures down to -20°C Ideally suited for industrial processes.

Year of construction: 1994, condition: excellent (used), 4 side planer 8 8 HARBS heads long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm. Kodpfx Ajl Dw Nxeabonc

Condition: used, Capacity: 80 m/min Planer feed table, tested. At speeds up to 80 m/min. Knjdpfjg S Dm Nsx Aabec

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm Kedsxlfwpspfx Aabjnc With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Technical data: - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm Kedei Apuhopfx Aabjnc - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Power supply voltage - 380-400V Frequency - 50Hz Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Tooth pitch - 6 -25mm Sharpening disc - Profiled 150mm CBN disc Weight - 115kg Kjdpsxiv Ugefx Aabenc

Condition: ready for operation (used), Butler Planer With Flott linisher attachment Vast amount of planning tools 6000mm x 2440mm table 3000mm between columns Knjdpfx Aaswwk Rbeboc 2440mm under the bridge (vertical) New electrics and motor

Condition: new, Selling price: € 250, US$ 264,8 Knedpfxepa Rrho Aabjc For every brand and model of backhoeloder, skid steer, truck front, bobcat, loader snow plough will be manufactured. Please contact for detailed information. Prices are representative.

Condition: excellent (used), SCM F520 Jointer Working width: 520 mm Four-knife cutterhead Traditional knives Electronic raising and lowering of the worktable Main fence adjustable up to 45° Table length: 3000 mm Knjdpjxp Ic Nsfx Aabec CE certificate DTR documentation

Condition: excellent (used), Catalog number 6309 TECHNICAL DATA PLAIER: - shaft width 510mm - 3-knife shaft - adjustable guide at an angle - length of the tops 1910mm - both tops adjustable Knjdog Tl Rwopfx Aabjc THICKNESSING MACHINE: - max. thickness of the processed element on the thicknesser 200mm - cover for the thicknesser shaft from above: - pawls - pulling input shaft, toothed - planing shaft - pulling output shaft, smooth - smooth feed speed adjustment 7-14m/min - main motor approx. 4kW - shaft revolutions 3000/6000 - dimensions length/width/height 1910x870x970mm - weight 780kg – production Italian – very good condition, used machine Net price: PLN 14,500 Net price: EUR 3,420 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: excellent (used), Four-side planer SCM Compact P Max planing width: 230 mm Max planing height: 120 mm Number of spindles: 4 Spindle layout: Bottom 5.5 kW Right Left 7.5 kW Chamfering tools 7.5 kW Spindle diameter: 40 mm Knsdpfxsxph E De Aaboc Two feed speeds: 6/12 m/min Pneumatic material hold-downs Infeed table length: 2500 mm

Condition: excellent (used), CATALOGUE NUMBER 7134 TECHNICAL DATA - max planing width 500mm - max planing height 190mm from above: - pawls - sequential pulling shaft - 2 rows of clamps - sequential pulling input shaft - 500mm, 4-knife planing shaft, 7.5kW motor - clamps - smooth pulling shaft, output - output clamp Kjdpfx Aajpmtckobsnc from below: - adjustable input table + clamp - smooth sliding shaft - 500mm, 4-knife planing shaft, 5.5kW motor - 2 smooth sliding shafts - side clamp from the back: - side spindles 1) vertical right 140mm 4kW 2) vertical left 140mm 4kW - spindle diameter 40mm - spindles adjustable up/down, right/left - smooth feed speed regulation 8-30m/min - electric table top lifting - exhaust port diameters 2x145mm, 2x160mm - dimensions length/width/height 2050x1700x1700mm - weight 2100kg ADVANTAGES - ideal for floor processing - electric table top lifting - Czech production - used planer, very good condition Net price: PLN 37,900 Net price: EUR 8,900 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOG NUMBER 6645 Knsdpfjh Up Rkox Aabjc TECHNICAL DATA - Shaft width: 410 mm - Shaft cover - Noise-reducing comb - Number of knives: 4 pcs - Table length: 2530 mm - Cast iron tables - Both tables adjustable - Original cast iron adjustable-angle fence + slat guide - Motor: 3 kW - Extraction port diameter: 140 mm - Dimensions (L/W/H): 2540x1100x1320 mm - Weight: 728 kg Net price: 13,900 PLN Net price: 3,280 EUR Net price calculated at exchange rate 4.25 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7695 TECHNICAL DATA - shaft width: 640mm - number of knives: 4 - maximum thickness of the workpiece: 200mm *Top section: - anti-kickback fingers - feed shaft, toothed, sequential (split, sectional) - pressure elements - planing shaft - pressure elements - smooth outfeed, feed shaft *Bottom section: - smooth sliding shaft at the infeed - smooth feed shaft at the outfeed - adjustable rollers in the lower table Ksdpjw Elqfefx Aabenc - electric table height adjustment - main motor 7.5kW - stepless feed speed adjustment 8-24m/min - extraction port diameter 180mm - dimensions L/W/H 1400x1100x1650mm - weight 1650kg Net price: 17,900 PLN Net price: 4,210 EUR at the exchange rate of 4.25 PLN/EUR (Prices may change with significant rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7244 TECHNICAL DATA - max. width of the processed element 800mm - max. thickness of the processed element 160mm from above: - smooth sliding roller - pawls - pulling shaft, toothed, divided (segmented, sequential) allows simultaneous planing of several elements - 2 rows of pressure - pulling shaft, toothed, divided (segmented, sequential) - pressure - planing shaft 810mm, 4 knives, 18.5kW - pressure - pulling shaft smooth, metal Knedpfx Aorfb Nvoaboc from below: - adjustable preliminary table with sliding roller - sliding roller - planing shaft 810mm, 4 knives, approx. 10kW - 2 pulling rollers, smooth, metal, adjustable - metal roller, sliding - electric lifting of the table top - smooth regulation of the feed speed 7-40m/min - engine approx. 2.2kW - diameter of the exhaust port 200mm, 180mm - dimensions length/width/height 1950x2100x1700mm - weight approx. 2500kg - Czech production - very good condition, - used planer Net price: PLN 34,900 Net price: EUR 8,200 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7343 TECHNICAL DATA - max. width of the processed element 180mm - max. height of the processed element 120mm 4 spindles: 1) horizontal lower 180mm 4kW 2) vertical right 120mm 4kW 3) vertical left 120mm 4kW 4) horizontal upper 180mm 5.5kW - spindle diameter 40mm - all heads adjustable up/down, right/left - pressure on the infeed - 6 infeed, pulling, toothed rollers from above, including 1 double - double outfeed, pulling, rubber roller from above - input, pulling, toothed, wide, metal roller from below - output, pulling, metal, smooth roller from below - feed motor 2.2kW - feed on Cardan shafts - smooth regulation of feed speed - electric setting of planing thickness - lifting motor 0.75kW - length of the insertion table 1580mm - diameter of the extraction nozzle 4x120mm - dimensions length/width/height 3040x1500x1700mm - weight about 2800kg ADVANTAGES - ideal for wet and dry wood - unpainted - for 4 heads - DTR + CE documentation - used planer, very good condition Knedpfstx Tmmsx Aabsc Net price: PLN 46,900 Net price: EUR 11,040 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Catalog number 6393 TECHNICAL DATA - max. width of the processed element 200mm - max. height of the processed element 150mm - number of spindles 4: 1) horizontal lower 200mm 5.5kW 2) vertical right 150mm 4kW 3) vertical left 150mm 4kW 4) horizontal upper 200mm 5.5kW - all heads adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000rpm from above: - input rollers, pulling, toothed 6pcs, including 2 double - 1 output roller, pulling, rubber from below: - input roller, toothed, pulling, torsional in the lower table - side pressure 3pcs - output, pulling, metal, smooth roller - all rollers pressed pneumatically - length of the input table 2130mm - top adjustable up/down - central lubrication - electric setting of planing thickness - lifting motor 1.1kW - smooth regulation of feed speed on the inverter - feed motor 3kW - feed on Cardan shafts - closed in the cabin - diameters of the exhaust nozzle 4x130mm - dimensions length/width/height 3550x1750x1800mm - weight about 3000kg Knjdpfx Aashh Sflsbjc ADVANTAGES - for 4 heads - ideal for wet and dry wood - DTR documentation - used machine, very good condition Net price: PLN 65900 Net price: EUR 15500 Net price calculated according to the exchange rate 4.25 PLN/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: excellent (used), CATALOGUE NUMBER 7663 TECHNICAL DATA - max planing width 510mm - max planing height 200mm - from above: - pawls - pulling shaft, toothed - clamps 2 rows - infeed pulling shaft, toothed - clamp - 510mm planing shaft, 4-knife, 7.5kW motor - clamps - pulling shaft, smooth, outfeed - clamp on the outlet 2pcs - smooth pulling shaft - from below: - clamp - adjustable infeed table + sliding roller - 510mm planing shaft, 4-knife, 5.5kW motor - 2 sliding shafts, smooth - side clamp - from the back: - side spindles 1) vertical right 140mm 4kW 2) vertical left 140mm 4kW - spindle diameter 40mm - 4-knife heads installed at a height of 120mm - spindles adjustable up/down, right/left - smooth feed speed regulation - electric table top lifting - exhaust port diameters 3x150mm, 1x110mm - dimensions length/width/height 2300x1700x1700mm Kodpfxewqchfs Aabonc - weight 2200kg ADVANTAGES – ideal for floor processing – electric table top lifting – Czech production – used planer, very good condition Net price: PLN 36900 Net price: EUR 8680 Net price calculated according to the exchange rate of PLN 4.25/EUR (for larger price may change due to exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7221 TECHNICAL DATA - min / max width of the processed element 45 / 150mm - min / max height of the processed element 15 / 50mm 3 spindles: 1) horizontal lower 11kW 2) horizontal upper 22kW (7000rpm) 3) horizontal lower 5.5kW spindle diameter 40mm - spindle 1 and 3 manually adjustable up / down, right / left - spindle 2 manually adjustable right / left - spindle 2 electrically adjustable up / down - spindle 2 and 3 are equipped with brakes from above: - 3 input, pulling, metal toothed rollers - 1 double output, pulling, rubber roller from below: - pressure at the inlet - grooved top - pulling roller, metal, smooth - electric setting of planing thickness - smooth regulation of feed speed 6-24m/min - 3kW feed motor - feed on Cardan shafts - length of the inlet top 1970mm - automatic top lubrication system - diameter of the exhaust port 1x150mm, 2x140mm Knsdpoq Nnpfsfx Aabsc - dimensions length/width/height 3070x2000x1800mm - weight 2000kg ADVANTAGES - German production - for 3 heads - for processing lamellas - grooved top - heads included - unpainted - very good condition - used planer Net price: PLN 125900 Net price: EUR 29600 Net price calculated according to the exchange rate 4.25 PLN/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: excellent (used), CATALOGUE NUMBER 7133 TECHNICAL DATA - max. width of the processed element 220mm - max. height of the processed element 120mm - 5 spindles: 1) horizontal lower 220mm 5.5kW 2) vertical right 120mm 3) vertical left 120mm; 2i3 11kW 4) horizontal top 220mm 11kW 5) horizontal bottom 220mm 5.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - pneumatic clamps - 4 input rollers, pulling, toothed, including 2 double - 1 double output roller, pulling, smooth, rubber, from above Knedpfxjpmr T Ao Aabjc - output roller, pulling, rubber, from below - feed on Cardan rollers - feed speed adjustment - feed motor 2.2kW - lifting motor 0.25kW - electric adjustment of planing thickness - length of the input table 1970mm - central lubrication - diameter of the extraction nozzle 4x120mm, 140mm - dimensions length/width/height 3500x1550x1400mm - weight 1750kg ADVANTAGES - 5 heads - German production - unpainted - used planer, very good condition Net price: PLN 48,900 Net price: EUR 11,500 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Catalogue number 7738 TECHNICAL DATA SURFACE PLANER: - shaft width 500mm - 4-knife shaft - noise-dampening comb - shaft guard - adjustable angle fence - table length 2200mm - longer infeed table 1180mm - both tables adjustable THICKNESSER: - max workpiece thickness on thicknesser 240mm - thicknesser shaft guard *from above: - anti-kickback fingers - toothed, swiveling infeed roller - pressure bars - cutterblock - pressure bar - smooth outfeed roller - adjustable roller in lower table - two feed speeds 7/14 m/min Ksdpfsxcx Ucjx Aabenc - main motor 5.5kW - electric brake - extraction port diameter 150mm - dimensions L/W/H 2300x950x1100mm - weight 910kg ADVANTAGES – Italian manufacture – 4-knife cutterblock – long tables – perfect condition, not repainted – used surface planer-thicknesser Net price: 21,900 PLN Net price: 5,150 EUR depending on exchange rate 4.25 EUR (Prices subject to change with higher fluctuations)

Condition: excellent (used), Catalogue No. 7713 TECHNICAL DATA - Max. working width: 240 mm - Max. working height: 130 mm - 6 spindles: 1) Lower horizontal 240 mm, 7.5 kW 2) Right vertical 130 mm, 5.5 kW 3) Left vertical 130 mm, 5.5 kW 4) Upper horizontal 240 mm, 7.5 kW 5) Upper horizontal 240 mm, 5.5 kW (spindles 4 and 5 electrically adjustable up/down) 6) Lower horizontal 240 mm, 5.5 kW - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm * From above: - 8 metal, toothed infeed rollers, including 3 double rollers - 4 rubber outfeed rollers, smooth, including 2 double rollers * From below: - 3 smooth feed rollers - 3 side pressure rollers - Infinitely variable feed speed control via inverter - Pneumatically pressed rollers - Feed motor: 7.5 kW - Kardan shaft drive feed - Electrically adjustable planing thickness - Body lifting motor: 0.75 kW - Infeed table length: 2480 mm - Pneumatic opening/closing of the safety cover - Pneumatic table blow-off - Centralized table lubrication - Extractor port diameters: 3x120 mm, 3x150 mm - Dimensions (LxWxH): 5300 x 1700 x 1800 mm - Weight: 5000 kg Knodpjw H Aqxofx Aaboc ADVANTAGES - Made in Italy - 6-head configuration - For wet and dry timber - Pneumatic safety cover opening - Pneumatic table blow-off - Spindles 4 and 5 electrically adjustable - Used planer, very good condition Net price: 136,900 PLN Net price: 32,200 EUR (based on exchange rate 4.25 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7618 TECHNICAL DATA - shaft width 500mm - number of knives 4pcs - max. thickness of the processed element 230mm from above: - pawls - toothed, pulling, torsional, sequential input shaft - clamps - planing shaft - clamp - smooth pulling output shaft from below: - 2 sliding rollers in the table - 5.5kW motor - manual lifting of the table - 2 types of feed speed 7.5;13m/min - diameter of the extraction nozzle 160mm - dimensions length/width/height 1100x1000x1200mm - weight 600kg ADVANTAGES - Italian production - unpainted - used thicknesser, very good condition Kodpfx Aowbdlyoabsnc Price net: PLN 15,900 Net price: EUR 3,740 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)