Used Sawmill for sale (759)

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, Round logs stepfeeder for logs separation and one piece feeding, hydraulical driven, incl. cylinders, meant for logs with diam 10-45 cm. Pgjdpfx Apeua Tb Dehor

Condition: used, Board sorting pockets IDL000771 - electric motors 14 pcs x 0,55 kW - inside width: 6400 mm - pocket length: 2600 mm - between rails: 1200/800/900/900/900/900 mm - in each section 6 rails Pgodpfx Ast Ebn Dephjr

Year of construction: 1988, condition: reconditioned (used), Grinder type DURE Cel The grinder is designed for sharpening woodworking tools such as: circular, straight and helical tooth milling cutters; milling heads, circular saws with carbide blades, planer blades; chisels. It is used in vegetable sawmills for woodworking. Dure grinder Technical and operating data Supply voltage: ~3 x 400 V; 50 Hz Largest tool travel of the tool carrier: 660 mm Largest travel of the cross slide: 160 mm Largest horizontal travel of grinding head: 140 mm Rotation of grinding head in horizontal plane: 360° Rotation of the grinding head in the vertical plane: ± 30 ° Largest vertical displacement of the grinding head: 240 mm Spindle speed: 3500 or 6000 min-1 Overall dimensions of the sharpener (L x W x H): 1380x830x1460 mm Weight of the grinder (with accessories): 515 kg Largest diameter of sharpened cutters: 250 mm Largest diameter of sharpened blades: 600 mm Diameter of shanks of sharpened cutters: max. 20 mm Maximum length of sharpened blades: 640 mm Podsuuk Dtjpfx Aphsgr Year: 1988

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance Pgsdonygvrepfx Aphor No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Year of construction: 2008, condition: excellent (used), Downward conveyor / separation / cycle conveyor. Very stable design. Only 6 years in operation. With 5 cycle discs. Drive via SEW gear motor with brake. Including steel base / cladding. Pgjdpslvt E Uefx Aphor

Condition: refurbished (used), PALLET LINE MULTIBLADE AND CROSSCUTTING MACHINE Pgjdpfjqag T Ajx Aphjr A.COSTA VOLLMER ARTIGLIO PRIMULTINI STORTI We also have all kind of Sawmill machines

Condition: used, Year of construction: 1995, machine/vehicle number: IDC000049, Vecoplan VZ 60/34 V shredder Pedpfxjrdykvo Aphjgr For shredding wood waste and other products. Inlet width 600 mm; Inlet height 340 mm; Number of cutting plates 28; Cutting inserts 40 x 40 mm; Rotor speed approx. 450 rpm; Chip or shredded product size approx. 30 mm; Capacity 2 m3/hour; Input rotor motor power 11 kW

Condition: new, Year of construction: 2026, The PIRANHA 310 Multi-blade or Multi-blade Circular Saw with single shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. Pjdjhpbu Repfx Aphsgr ideal for the production of strips, squares, sawn timber, profiles, edged planks, prisms, boards, elements for pallets. SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE

Condition: excellent (used), functionality: fully functional, Frietsch SAWMILL MACHINERY Purchase and sale of KASTO sawing machines Dear Sir or Madam, We buy, sell, overhaul, and refurbish KASTO sawing machines. For over 40 years, we have experience with KASTO sawing machines and have specialized in overhauling these machines. We can also handle KASTO controls! The machines are overhauled by qualified personnel according to KASTO factory standards. We also source KASTO sawing machines according to your requirements for machine overhauls. Excellent price-performance ratio through professional machine overhauls. Technical data KASTOtwin AE 3 Dimensions of standard machine Length 2,345 mm Width 2,240 mm Height max. 1,835 mm Total weight approx. 2,500 kg Total drive power 7.0 kW Drive power, sawing motor, frequency-controlled 4.0 kW Cutting range in mm approx.: Cutting range Ø 320 mm Cutting range, flat (W x H) 320 x 320 mm Smallest dimension, round Ø 10 mm Square, H x W 10 mm Material feed length, single max. 750 mm Multiple feed 9,999 mm Shortest section length 6 mm Smallest diameter to be sawn 10 mm Minimum remaining piece in single cut 15 mm Shortest remaining piece length in automatic operation 100 mm Cutting speed, stepless 20 - 100 m/min Saw band dimensions Material support height 700 mm Pgsdpfsgwaf Dox Apher Cutting feed: stepless adjustment Material feed, ball screw Band tension Control system CompactControl Chip pressure regulation 20 to 60 bar Band slippage monitoring Coolant system

Condition: used, Year of construction: 1980, machine/vehicle number: GUS 71 Typ 26.813, Full frame saw from Wusterer & Dietz including: Pjdpfxov Ummbs Aphegr Frame saw Saw tensioner Riving knife Frame roller conveyor 4-strand puller Viewing by appointment.

Year of construction: 2007, condition: excellent (used), functionality: fully functional, REMONNAY edging and resawing machine, type DR8/225, manufactured in 2007. 7-position variable adjustment, 2 x 110 kW motors each. Pre-trimming saws for side boards. Cutting height 225 mm. S-type singulation with infeed roller table. Podpsfcltgsfx Aphjgr Includes tilting and aligning table. Chip separator with two deflectors. Board cross conveyor. Roller conveyor with stripping device. Electrical control cabinet with control panel. Includes all accessories (circular saws, etc.).

Condition: excellent (used), functionality: fully functional, Robust Möhringer slat conveyor system. Length 11.20 m. Slat length 2.0 m. Overall height 1.0 m. Equipped with integrated lifting and lowering transverse conveyors with 5 chain strands, hydraulically operated. Pgedpfxjzg Drnj Aphsr Discharge to the left and right. 4 hydraulically lifting and lowering model support rollers. Split drive with 2 geared motors.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 40,000 h, machine/vehicle number: 1708, arm reach: 15,550 mm, load capacity: 1,800 kg, track width: 3,000 mm, year of last overhaul: 2020, Equipment: cabin, crane, Well-maintained forestry truck with crane for sale on behalf of a customer: Year of manufacture: 2005 Pgsdjzh Uk Repfx Aphor Crane: ESX I, new in 2020 Reach: 15.55 m All-wheel drive Saw: 1.30 m bar length, on the left side Track width (m): 3.0 Grapple: included Crane arrangement: in front of the cab Cab side: left

Condition: used, machine/vehicle number: G-BBS124070P, Pilous CTR750EV log band saw, very good condition, new rails, 5.5 kW, 4100 mm band length, 460 kg Prices subject to change, errors, printing and typesetting errors reserved Psdpfx Asvw Ecgjphegr

Condition: used, Jonsored Chainsaw Mill EL-600, 9m cutting length, electric motor, 5.5 kW, 600 kg, maximum log diameter approx. 500 mm Pgedpfx Apex H Udwoher Prices subject to change without notice; errors, misprints, and typographical mistakes excepted.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, A log turning (orientation) system for top-end-first positioning is available for sale. The system was in use for only a few years before the entire log infeed was removed. Pgodpfx Apswkdt Nehsr We also have additional components from the same log infeed available.

Condition: excellent (used), Complete planing line from intake to stacker with a Waco 3000 planer and surrounding equipment from System Hall Pjdpfx Apem Uyknjhjgr

Year of construction: 1995, condition: used, In Good Condition Pedpfedq Uf Hsx Aphogr

Condition: ready for operation (used), Cambio 75 feed conveyor, infeed conveyor wheels Pjdpfxsv Irvus Aphjgr

Condition: good (used), Year of construction: 1995, functionality: fully functional, 1 used Cambio 70 debarking machine with Mayrhofer mechanization, consisting of: Mayrhofer roundwood infeed system with 4 strands, approx. 6 m long and 6 m wide; singling stage and feeder onto the block conveyor; Cambio 70 debarking machine; length measurement; 4 discharge bunkers; overall line length 45 m; scraper conveyor for bark removal. Inspection in operation is possible at any time. Pgjdexvpq Iopfx Aphsr

Condition: good (used), Hydraulic unit for Esterer LSH saw gate, manufactured in 2006 Type: RP 63 WÜ Feed mechanism for LSH also available Podpfog R Sm Dex Aphjgr Fully functional – in good condition – immediately available Location: Austria, near Ried im Innkreis Please also check out my other listings. I look forward to your inquiry.

Year of construction: 1982, condition: good (used), Travelling crosscut saw, Esterer KSG-F, manufactured in 1982 Pgjdpfsip T Dlox Apher including saw blades including control system including length measurement including frame including hydraulics available immediately Location: Austria, near Vienna

Condition: used, Year of construction: 1977, Wurster and Dietz GDZ 600 GES Year of construction 1977 Passage: 71 cm stroke: 600 mm with swing frame with water-cooled guides with hydraulic saw clamp Jansen with riving knife with saw blades with templates with fence Pedpfx Aeqpdi Usphsgr immediately available Location: Austria, near Klagenfurt

Year of construction: 1994, condition: used, Edger line / automatic edger / double edger with measurement and automatic saw blade adjustment EWD Esterer Type: DK90 TL 1000 Year of manufacture: 1994 Pgsdpjyam Iasfx Aphjr Maximum pass-through width: 1000 mm Maximum cutting height: 120 mm 3 blades in total 2 blades adjustable Measurement system: Combimes with S-conveyor with crosscut saw with Esterer ARS TR infeed with 2-lamella chip separator Can be fully refurbished upon customer request. The plant has already been dismantled and is immediately available. Location: Austria, near Leoben

Condition: used, Sorting / stacking system consisting of: - Cross feed conveyor - Tilting table - Disposal conveyor for intermediate laths - S-conveyor - Alignment roller conveyor - Double cross-cut station - 3 sorting boxes (1x reject, 2x stacking boxes with hydraulic lift) - Electrical components, if available - Accessories, if available Total width: approx. 7.5 m Total length: approx. 14 m Total height: approx. 3.5 m Sawn timber lengths: 3–5 m (possibly up to 6 m) Pedpfey Da Agox Aphogr Location: Austria, near Vienna