Used Sbc 990 for sale (1,531)

Condition: new, Fast and convenient goods access - For pallets and pallet cages - For shelf depth 1,100 mm - Ergonomic removal of goods Included in the scope of delivery: 01x support drawer, new Type: UE-870 for shelf depth: 1,100 mm Material color: Anthracite grey RAL 7016 Loading surface: 830 x 1,240 mm Total width: 880 mm Height: 85 mm Cross beam distance outside-outside: 990 - 1,123 mm Load capacity: 800 kg Extension: 70 % = 840 mm Internal designation: 356.948 Shipping costs: (pallet) 1 - 10 pieces: 104 € plus VAT. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery. Itjdpfx Aajuablqonor

Condition: used, Year of construction: 1997, machine/vehicle number: YS2P6X2000123xxxx, Please contact ATS Norway for more information Please provide reference number upon request: 19904 Specifications: EU approved until 12.05.2026 Mileage: approx. 347,000 km Transmission: Manual Steel suspension front, air suspension rear Engine brake Tyres: see pictures Isdpfxjv U S R Se Aanjtr Steering on 3rd axle Atlas XAS96 compressor Approx. 8-meter lift Lift approved until 06.2025 Support legs Rotating light bar Climate control / AC Ready for delivery Video available Description: Scania P114 lift truck from 1997.Equipped with an Atlas compressor and an approx. 8-meter lift.The lift is approved until 06.2025.Ready for delivery. Km: 347000 Technical approved: Yes EU-approved until: 12.05.2026 Own weight: 17880 Total Weight: 26500 Payload: 8545 Width: 250 Length: 923 Euro: 2 Model: P114 Liftbil m/ Atlas kompressor og 8 meters Lift. EU ok Gearbox: Manual

Condition: used, Year of construction: 2015, 2015 | MAN TGX 18.480 4x2 BLS WITH TIPPER HYDRAULIC AND GOOD TIRES | Used Tractor Unit | 396459 kms 📍Location: Germany, Heusweiler 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 19900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 28 inspection points 28 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The MAN truck was in good condition at the time of the inspection, however, most of the tires need to be replaced. The rear left mudguard is torn off. Unfortunately, the trailer could not be detached, which limited the inspection of the truck. Tilting the driver's cabin was not possible due to the lack of tools, so an inspection of the engine could not be performed. The truck is equipped with a double-acting hydraulic system with two lines and an additional pump designed for a Walking Floor. The total height with the cabin spoiler mounted is 3.9 m. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "31325 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed Isdex H A Iqopfx Aanjtr ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, grinding length 12000 mm grinding width 2800 mm workpiece height 2510 mm control Siemens 840 D workpiece weight 24000 kg column daylight 2820 mm table surface area 11990 x 2500 mm table feed 1 - 40 m/min cross rail - adjustment 2510 mm total power requirement 110 kW dimensions of the machine ca. 32,5 x 9 x 6,73 m weight of the machine ca. 151 t Equipment/Accessories: - 1 universal grinding support, 22 kW swivel range of grinding spindle +/- 110° grinding wheel dimensions Ø 700 x 130 mm vertical adjustment 1000 mm with puller Iedpfx Aswa Dxwsanetr - 1 peripheral grinding support, 30 kW grinding wheel dimension Ø 600 x 150 mm vertical adjustment 230 mm with puller - Coolant and filter unit - Various grinding wheels and flanges - Technical documentation

Condition: used, Year of construction: 1990, table load max. 40 t t with manual operation panel ja weight of the machine ca. 22 t 1918 Year ca. 1990 Dimensions (L/W/H) 3500 x 2300 x 2400 mm +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Isdpfx Aaohy T Nvjnjtr +++++

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 1203697, Bros. punching press Make: Haulick & Roos Type: RVD 8/800 NS Press with adjacent console: Haulick & Ross RVD 80-800NS Eccentric press with double connecting rod with 4-fold bearing mounted eccentric shaft Isdpfxoudn Uts Aanotr No: 1203697 YEAR OF MANUFACTURE: 1990 Press force: 800kN Speed: 30-300/min. Drive: 26kW Ram stroke: 4-60mm ram adjustment: 80mm Table: 800x640mm Fold-through hole: 780x60-160mm Table over floor: 1240mm Frame width: 780mm Lateral upright width: 350mm Installation height max. stroke bottom/ram top: 300mm Space required for press (LxWxH): 3200x1700x3000mm Control cabinet (LxWxH): 1800x400x 1900mm Weight: 12.000kg Reel: Eigl 2527-90 Driven: no Straightener with strap loop sensor: Eigl RST W37/300 (2528-90) Max. width: 300mm Max. Thickness: 3mm Number of rolls: 5 Feed rate: Haulick & Roos RS 260/120°/2727 Max. Feed length 260mm Max. Width 260mm Max. Max. thickness 3mm Feed speed 40m/min. Material cross-section up to 800mm?

Condition: used, Technical data for the pallet racking system: Racking system: Dexion Type: P 90 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: 29,990 mm Number of bays per shelf row: 10 pcs. Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 09 pcs. Pallet spaces per row: 90 pcs. Total pallet spaces: 90 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 900 kg The scope of delivery includes: 11x pallet rack uprights, used Material color: sendzimir galvanized Type: M Profile dimensions: 90 x 75 x 1.8 mm Incl. cross and diagonal braces, foot plates The uprights are pre-assembled (bolted framework) 1,500 mm high 1,100 mm deep 40x pallet rack cross members, used Material color: sendzimir galvanized Beam type: SLB 110|15 Box profile: 110 x 50 mm Agraffe: 5 HK (hooks) Clear width: 2,900 mm Max. load per pair of beams 2,700 kg, with evenly distributed load 80x safety pin, used Material color: sendzimir galvanized To secure the longitudinal beams against unintentional lifting out 40x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 20x shim plate, used Design: completely galvanized For leveling the shelf uprights that are Itsdpfjtq Eq Ssx Aanor are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, machine/vehicle number: YV2F4B2DXTA25xxxx, mileage: 3,56,000 km, Year of construction: 1996, Please contact ATS Norway for more information Please provide reference number upon request: 21736 Specifications: Not EU-approved Model year: 1996 Mileage: approx. 356,000 km Manual transmission Tires (see photos) 22 t/m Palfinger crane from 1990 Jib Crane rotation Timber body without crane Tipper body Flatbed LAXO locking system Length: 765 cm Width: 250 cm Isdpfx Aexu Ax Aoanetr Wheelbase: 380 / 137 cm Curb weight: 9,660 kg Rotating beacon bar Extra lights Radio/CD Air conditioning Description:1996 Volvo FL12 with LAXO locking system.The truck comes with four bodies: a crane platform with a 22 t/m Palfinger crane (with jib and rotation), a timber body, a tipper body, and a flatbed.The truck is functional but not EU-approved. The exhaust has a leak, but a new exhaust pot is included.Ready for delivery. Km: 356000 Technical approved: no EU-approved until: 31.08.2023 Own weight: 9660 Total Weight: 28000 Payload: 18265 Width: 250 Length: 765 Euro: 1 Model: FL12 m/ 22 t/m Palfinger kran, tømmerflak, Dumperkasse og plan. Gearbox: Manual

Year of construction: 1990, condition: ready for operation (used), Control Unit Itsdpfxex D R Idj Aaner Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 5000 rpm Tool taper ISO 50 Additional Equipment Automatic tool changer: 40 positions Working spindle diameter: 128 mm This 4-axis TOS WFQ80NCA-CNC/50 boring machine was manufactured in 1990. Consider the opportunity to buy this TOS WFQ80NCA-CNC/50 boring machine. Contact us for more information. Application Types Other Machine Tools

Condition: good (used), lifting height: 22,000 mm, Year of construction: 2018, operating hours: 5,800 h, Empty weight: 4.700 kg Lifting capacity: 3.990 kg CE mark: yes Technical condition: good Visual appearance: good Maximum lifting capacity at end of jib: 250 kg Delivery terms: EXW Please contact Vink Machinery for more information Hoeflon C10 * 2018 * Diesel and 380-volt drive * 5,800 working hours * Fly jib * 4,000 kg winch * Non-marking tracks * Remote control * 22-meter hook height * 19.8-meter horizontal reach * Infinite slewing rotation Iodpfxox I Rgqj Aanjtr * 3,990 kg lifting capacity * 4,700 kg net weight * Includes maintenance history

Condition: excellent (used), CATALOG NUMBER 7541 Technical Specifications: Itjdpfx Aaovwczyonor - Maximum diameter of main saw blade (without scorer): 400mm - Maximum diameter of main saw blade (with scorer): 350mm - Blade bore diameter: 30mm - Maximum cutting height for 400mm blade: at 90 degrees – 120mm, at 45 degrees – 85mm - Maximum cutting height for 350mm blade: at 90 degrees – 95mm, at 45 degrees – 67mm - Main blade adjustable vertically and for angle - Blade guard - Equipped with side sliding table - Cutting length on sliding table: 1700mm - Cutting width on sliding table: 1400mm - Cutting width at fence: 1350mm - Main motor power: 6kW - Table dimensions: 1190x990mm - With table extension: 1880mm - With table enlargement: 1890mm - With scorer unit - Maximum scorer blade diameter: 120mm - Scorer spindle diameter: 20mm - Scorer motor power: 0.75kW - Three spindle speeds: 3500, 4500, 6000 rpm - Brake - Extraction port diameter: 80, 120mm - Machine dimensions (LxWxH): 3050x2200x1600mm - Weight: 800kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Blade guard – Equipped with scorer unit – With table extension and enlargement – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: used, operating hours: 29,905 h, Type of fuel: Electric Empty weight: 4.800 kg Dimensions (LxBxH): 240 x 120 x 265 cm Lifting capacity: 3.000 kg Lift height: 600 cm Clearance lift height: 210 cm Fork length: 900 mm - Documentation available: Yes - └ Type Documentation: User manual - CE certificate present: No - Operating hours: 29905 Ijdpsw I A Hnsfx Aanotr - Lifting capacity: 3000kg - Lifting height: 6000mm - Overhead clearance: 2650mm - Free lift: 2100mm - Fork length: 900mm - Number of wheels: 4 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: Free-lift, Work lights - Drive: Electric - Battery year of construction: 2009 - Capacity: 700Ah - Battery voltage: 80V - Transport dimensions: 2400mm x 1200mm x 2650mm (l x w x h) - Transport weight [kg]: 4800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: new, total length: 5,000 mm, total height: 3,000 mm, total width: 4,000 mm, load capacity: 500 kg, Warehouse stage 4,000 x 5,000 mm, capacity 500 kg / m ² Included in the scope of delivery: 4 stand, on one side of 100 x 100 x 3 mm 2 main carriers C + 300 x 3 x 3,990 mm (perforated) 5 crossbar S + 300 x 2 x 4,800 mm (closed) 10 mounting brackets 2 cross associations 9 chipboard P6, 3000 x 850 x 38 mm, UK white, OK nature incl. mounting material including load signs Dimensions, technical data Steel construction: 4,000 x 5,000 mm Floor area: approx. 20 sqm Top height flooring: freely selectable up to 3,500 mm (other heights on request) height bottom: OK minus 338 mm Load capacity: 500 kg / m ² Support: 100 x 100 x 3 mm Main beam: C profiles C + 300 x 3 mm (perforated) Crossbar: Sigma profiles S + 300 x 2 mm (closed) Flooring: 38 mm chipboard, one side white P6 Support in the following standard colours: RAL 7035, light grey RAL 7016 anthracite grey RAL 3000 flame Red RAL 5003 sapphire blue Other colours available upon request! Itodpfsd Hl D Dsx Aaner Accessories, such as stairs, railings, etc. are not included in the scope of delivery. These can be supplied at an additional cost.

Condition: used, machine/vehicle number: WDB9670251L93xxxx, mileage: 3,10,000 km, Year of construction: 2015, Please contact ATS Norway for more information Please provide reference number upon request: 15937 Specifications: Itjdpsvg Rmvjfx Aansr Mileage: 310000 km Transmission: Automatic Full air suspension Engine brake Euro 6 Good tires 4x2 Webasto heater Zepro tail lift, 2000 kg Specialkarosser AB box body 15-pallet capacity 231 hp Rear-view camera Remote control Radio/CD Climate control / AC Service performed by owner Upgraded at BOS Ready for delivery Description: Mercedes Atego with 15-pallet box body. New gearbox.The vehicle has been upgraded at BOS, including AdBlue system, brake pads, and circuit board.Service has been carried out by the owner.Ready for delivery. Km: 310000 HK: 231 Technical approved: no EU-approved until: 26.09.2025 Own weight: 7095 Total Weight: 11990 Payload: 4820 Width: 255 Length: 789 Kw: 170 Euro: 6 Model: Atego Gearbox: Automatic Number of pallets: 15

Condition: new, Heating circulating pump Product condition: new Brand: WILO Type: TOP-S 50/80r Model: 1320990 Connection size: DN 50 Supply voltage: 380V Itedpfxjvil Hve Aanjr

Year of construction: 2010, condition: excellent (used), Drive: 75 kW / 990 rpm Infeed opening: approx. 450x580 mm Rotor length: approx. 600 mm Rotor diameter: approx. 450 mm Heavy-duty design Closed solid rotor 3 rows of rotor knives (9 pcs), new 2 rows of stator knives (4 pcs), new With wear protection lining (Hardox), new Screen basket + 1 screen, new With control cabinet, approx. 6 m of cabling newly rewired Housing temperature monitoring Hydraulic power unit Brockenmühle (coarse shredder), ideal for shredding solid parts Test / demonstration possible by appointment Itedpfxeh Igyge Aanjr

Condition: excellent (used), CATALOG NUMBER: 6857 TECHNICAL DATA - Spindle diameter: 30mm Iedpfsi Aphvox Aanetr - Spindle height: 140mm - Interchangeable spindle - Height adjustable (up/down) - Guide fence - 4 spindle speeds + right/left rotation: 3000, 4500, 6000, 9000 RPM - Table size with extension: 1970x990mm - Motor: 5.2kW - Extraction port diameter: 1x80mm, 1x120mm - Dimensions (L/W/H): 1920x1050x1130mm - Weight: 550kg ADVANTAGES – German manufacture – Used milling machine – Very good condition Net price: 11,900 PLN Net price: 2,830 EUR Net price calculated at exchange rate 4.2 PLN/EUR (in case of major exchange rate fluctuations the price may change)

Condition: new, neu ca. 6 Monate ab Auftragse Itjdpfx Aaswiq Hmener Taiwan 111200 € 2101.68 € 1200 mm 730 mm 1.200 x 500 mm 1.200 x 500 mm max. 30 m/min 3.7 kW 27 kVA kW 4600 mm 3040 mm 2200 mm 6400 kg 990 mm 930 kg 1250 kg 405 x 50 x 127 mm 0,001 mm 500 - 2.000 U/min 11 kW 10.4" graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list Max. table speed (X axis) 30 m/min vertical feed by servo drive and ballscrew spindle transversal feed by servo motor and ballscrew spindle double V-slide wasy (turcite-B) for table longitudinal move grinding wheel spindle on 6 high precision angular contact bearings electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment table mounted with compensation * grinding wheel grinding wheel flange grinding wheel balancing stand balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH * The exact configuration of the dresser must be clarified before ordering

Condition: good (used), Included in the scope of delivery: 01x placed grating shelf, used Material finish: hot-dip galvanized Total depth: approx. 1,113 mm (load bar direction) Total width: approx. 885 mm (cross bar direction) For frame depth: 1,100 mm Beam support: approx. 59 mm Clear support span: 990 mm Load bar: TS 30/1.5 Frame height: approx. 45 mm Itsdpfx Asxz E Dzeansr Mesh size: approx. 68 x 33 mm Weight per piece: approx. 16.01 kg Internal designation: GR-155 Note: - The grating may show signs of damage, scratches, dents, or welded joints. Your contact persons in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only offered for collection. Any transport or shipping of this item beyond collection involves additional costs, which can be arranged with us individually depending on the delivery location or order volume.

Condition: used, machine/vehicle number: H2X116F0xxxx, Year of construction: 2015, operating hours: 9,900 h, fuel type: electric, Please contact ATS Norway for more information Please provide reference number upon request: 22013 Iodpfxsx H Ig Se Aanstr Specifications: Certified until 04/2026 2015 model Hours: approx. 9900 Capacity: 1400 kg 48 V Lifting height: 7900 mm Fork-mounted camera Extra work lights Charger included Description:Linde R14X reach truck from 2015.A camera is mounted on the forks.The truck is certified until 04/2026 and is ready for operation.Ready for delivery. Hours: 9900 Own weight: 11 Lifting heigth: 7900 Lifting capacity: 1400 Model: R14X-03 Reach Truck

Condition: new, Warehouse stage 16,000 x 5,000 mm, capacity 500 kg / m ² Dimensions / technical data Dimensions steel construction: 16,000 x 5,000 mm Dimensions surface Max: 16,000 x 5,000 mm Floor area: approx. 80 m ² OK height flooring: up to 3,500 mm (freely selectable) height bottom: OK minus 338 mm net capacity: 500 kg / m ² gleichm.verteilte load Itjdpfx Aasd Htr Tjner Included in the scope of delivery: 10 stand on one side of 100 x 100 x 3 mm 8 main beam C + 300 x 3 mm, L = 3,990 mm 18 crossbar S + 300 x 2 mm, L = 4,800 mm 36 bracket 4 Cross associations 33 chipboard P6, 3000 x 850 x 38 mm, UK white, OK nature incl. mounting material incl. load signs Stand either in the following standard colours: RAL 7035 light grey RAL 7016 anthracite grey RAL 3000 flame Red RAL 5003 sapphire blue (other colours on request) Galvanized main and cross members Accessories, such as stairs, railings, etc. are not included in the scope of delivery. These can be supplied at an additional cost. (Prices on request) Our services at a glance: (Prices on request) Installation, construction our general conditions of erection are to be observed Shelf testing Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelf systems Delivery with our own fleet of vehicles (without discharge)

Condition: new, Warehouse stage 8,000 x 5,000 mm, capacity 500 kg / m ² Dimensions / technical data Dimensions steel construction: 8,000 x 5,000 mm Dimensions surface: 8,000 x 5,000 mm Floor area: approx. 40 m ² OK height flooring: up to 3,500 mm (freely selectable) height bottom: OK minus 338 mm net capacity: 500 kg / m ² gleichm.verteilte load Included in the scope of delivery: 6 steel tube supports 100 x 100 x 3 mm 4 main beam C + 300 x 3 x 3,990 mm (perforated) 9 cross bar S + 300 x 2 x 4,800 mm (closed) 18 mounting bracket 3 cross associations 18 chipboard P6, 3000 x 850 x 38 mm, UK white, OK nature incl. mounting material including load signs Stand either in the following standard colours: RAL 7035, light grey RAL 7016 anthracite grey RAL 3000 flame Red RAL 5003 sapphire blue (Other colours on request!) Iedjd Htr Hspfx Aanetr Galvanized main and cross members We manufacture the storage platforms to any other desired measurement. Prices on request! Accessories, such as stairs, railings, etc. are not included in the scope of delivery. These can be supplied at an additional cost. (Prices on request) Our services at a glance: (Prices on request) Installation, construction our general conditions of erection are to be observed Shelf testing Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelf systems Delivery with our own fleet of vehicles (without discharge)

Condition: good (used), Technical Data for Pallet Racking System: Racking System: Dexion (Hovik) Type: P 90 Technical Data for Installation: Number of racking rows: 01 pc. Length per racking row: approx. 27,990 mm Number of bays per racking row: 10 pcs. á 2,700 mm Number of levels plus ground level: 03 pcs. Scope of delivery includes: 11x pallet rack uprights, used Material color: sendzimir galvanized Type: H Profile dimensions: 90 x 70 x 2.50 mm Incl. horizontal and diagonal bracing, base plates Uprights are pre-assembled (bolted framework) 5,000 mm high 1,050 mm deep 60x pallet rack cross beams, used Material color: white Box section: 120 x 50 mm Beam connector: 5 HK Itsdpfxsw R Ubvj Aanor Clear span: 2,700 mm 120x safety pins, used Material color: sendzimir galvanized For securing the longitudinal beams against unintentional lifting 44x expansion anchors, new Manufacturer: Hilti Model designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 22x leveling shims, used Design: fully galvanized For leveling rack uprights installed on uneven floors 01x load sign With field and bay load specifications, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for self-collection. Any additional transport or shipping of this item will incur extra costs, which can be requested from us separately depending on place of delivery and scope of supply.

Condition: good (used), Technical specifications for the pallet racking system: Rack system: Dexion Type: P 90 Technical specifications for installation: Number of rack rows: 1 Length per rack row: 36,910 mm Number of bays per rack row: 9 Number of levels plus floor level: 3 The scope of delivery includes: 10x pallet rack uprights, used Material color: Sendzimir galvanized Type: 100|25 Profile dimensions: 100 x 100 x 2.5 mm Incl. cross and diagonal braces, base plates The uprights are pre-assembled (bolted framework) 6,000 mm high 1,100 mm deep 54x pallet rack crossbeams, used Itsdpfxewigq Io Aanjr Material color: Sendzimir galvanized Box profile: 147 x 50 mm Crossbeam type: SLB 147|18 Clamp: 5 HK Clear width: 3,990 mm Max. load per pair of crossbeams: 3,900 kg, with uniform load. Distributed load 108x locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 40x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 20x leveling plates, used Design: Fully galvanized For leveling shelf supports that are installed on uneven ground 1x load plate with information on bay and compartment loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: new, Warehouse stage 4,000 x 10,000 mm, capacity 500 kg / m ² Included in the scope of delivery: 4 stand, on one side of 100 x 100 x 3 mm 2 stand, double-sided 100 x 100 x 3 mm 4 main beam C + 300 x 3 x 3,990 mm 10 crossbar S + 300 x 2 x 4,800 mm 20 mounting bracket 3 cross associations 18 chipboard P6, 3000 x 850 x 38 mm, UK white, OK nature incl. mounting material including load signs Dimensions, technical data Steel construction: 4,000 x 10.000 mm Floor area: 40 sqm Top height flooring: freely selectable up to 3,500 mm (other heights on request) height bottom: OK minus 338 mm Load capacity: 500 kg / m ² Support: 100 x 100 x 3 mm Main beam: C profiles C + 300 x 3 mm Crossbar: Sigma profiles S + 300 x 2 mm Flooring: 38 mm chipboard, one side white Support in the following standard colours: RAL 7035, light grey RAL 7016 anthracite grey RAL 3000 flame Red RAL 5003 sapphire blue Other colours available upon request! Itsdpfxsd Hl Nis Aanor Accessories, such as stairs, railings, etc. are not included, but can be supplied at an additional cost. (Prices on request)