Used Schaublin for sale (55)

Condition: excellent (used), Year of construction: 1997, Control Fanuc Series 20-T Gujdjzb R Iaopfx Albec Turning diameter 330 mm Bar diameter 42 mm Turning length 650 mm Speed 5,000 min-1 8-position turret Minimum quantity lubrication

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter 270 mm Maximum diameter above the cross slide 160 mm Center height above the cross slide 83 mm Maximum diameter above the machine bed 430 mm Turning length (depending on equipment) 630 mm Headstock: Standardized spindle nose, for the use of various chucks and mandrels with adapter accessories. Accessories for SCHAUBLIN chucks B45/F66 Maximum bar capacity, dia. 36 mm/60 mm Automatic chuck, standard dia. 210 mm Direct drive by AC motor, power at 100% / 50% duty cycle 15/18.5 kW Maximum torque at 100% / 50% duty cycle 135/165 Nm Maximum spindle speed 4000 min-1 Spindle positioning, increment 0.1° C-axis: Programmable increment 0.001° Spindle lock 80 Nm Pneumatic clamping cylinder 3400 daN Cross slide: Transverse travel, X-axis 230 mm Resolution along the radius 0.0005 mm Drive by AC motor, rated torque 3 Nm Ball screw, X-axis pitch 32 x 5 mm Longitudinal travel, Z-axis 720 mm Resolution 0.001 mm Drive by AC motor, rated torque 6 Nm Ball screw, pitch 32 x 10 mm Feeds: Working feeds, X/Z axes, stepless 0-5000 mm/min Rapid traverse rates, X/Z axes 8/10 m/min Feed force, X/Z axes 420/670 daN Turret system: Number of tool stations 12 Number of rotating tool stations 6 Drive by AC motor, intermittent duty power 3.7 kW Maximum intermittent torque 36 Nm Maximum drive speed 5000 min-1 Standardized tool holder 0VDI 30 Maximum cross-section of cutting tools 20 x 20 mm Integrated coolant system Indexing in both directions of rotation Gujdpezb U Epsfx Albsc Coolant system: Tank capacity 120 liters Pump flow rate 10 l/min Pressure 5 bars Inventory 2230043 including: 1 Fanuc 18i control unit 1 A2-6 headstock 1 VDI 30 turret with 12 positions for 6 rotating tools 1 pneumatically operated steady rest 180-65.200 1 SCHUNK Rota-s 200-52 A2-6’’ 1x3 jaw chuck 1 Brucker CM5 rotating center 1 ESX-25 radial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00552 1 ESX-25 axial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00550 1 KENNAMETAL ESX-25 dito, without collet EX 1 EWS ESX-25 dito, without collet EX 4 radial tool holders, short, left-hand, Form B2 ref 4100.0100 1 ESX-25 tool holder, Form E3 with EX25 collet and Ø 5 mm collet 1 dito without EX25 collet 3 threading collets Ø 4.5 – 6 and 8 mm 1 tool holder for indexable insert drills, bore Ø 40 mm, Form E1 ref 4100.00124 1 dito bore Ø 32 mm ref 4100.00107 1 dito bore Ø 20 mm ref 4100.00105 1 boring bar tool holder, bore Ø 8 mm, Form E2 ref 4100.00108 1 dito Ø 10 ref 4100.0109 1 dito Ø 12 ref 4100.0110 2 dito Ø 16 ref 4100.0111 1 dito Ø 20 ref 4100.0112 1 dito Ø 25 ref 4100.0113 1 dito Ø 32 ref 4100.0115 1 dito Ø 32 GARANT, long 5 steel protection plugs, Form Z2 ref 4100.00130 1 axial tool holder, left-hand, force C4 ref 4100.00103 1 CM 5 pneumatically operated steady rest ref 180-65.200 1 separate support for microscope ref 180-60.005 1 coolant system OPTION 1 3-jaw hinged center for Ø 30 – 120 mm ref 180-70.200 CHF 2'500.-- + VAT Unless otherwise stated, the technical data is provided without guarantee.

Condition: used, Collet set, rotary tool chuck collet holder for draw-in collets Collet chuck, collet holder, collet system Suitable for BOLEY - LEINEN - SCHAUBLIN - WEILER Draw-in collet type: 367E K28 DIN 6341 Collet diameter: 28 mm Collet length: approx. 105 mm Collet thread: TR 28 x 1.5 mm Collet taper: 40° Gusdpfx Ajzbhu Delbec - Draw tube with internal thread M 28 x 1.5 mm, handwheel for manual tightening of the collet - Length of draw tube to stop collar inside the handwheel: 457 mm - Outer diameter of draw tube: Ø 31 mm over a length of 390 mm, Ø 32.5 mm over a length of 67 mm - 31 draw-in collets: Ø 1 / 2 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 / 6 / 6.5 / 7 / 7.5 / 8 / 8.5 / 9.5 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 20.5 / 21 / 22 / 23 / 24 mm Total weight: approx. 10 kg Good condition

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 490 mm, table width: 305 mm, table length: 1,100 mm, overall weight: 2,000 kg, input voltage: 400 V, Schaublin 53 in good condition. ISO-40. 5.1 kW. Guodpoy A Nbiefx Albsc

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: Series 0i/-MC, total height: 2,580 mm, total length: 2,150 mm, total width: 2,470 mm, table width: 750 mm, table length: 540 mm, overall weight: 4,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 1,480 h, spindle nose: ISO40, number of spindles: 1, number of slots in tool magazine: 20, Equipment: documentation/manual, rotational speed infinitely variable, The Schaublin 60 CNC is perfectly suited for high-precision work and small batch production. This machine is renowned for its exceptional dimensional and form accuracy, excellent spindle runout, and top-quality surface finish—ideal for toolmaking, precision engineering, or the medical/jewelry industry! The machine is standard equipped with: - Internal cooling (TSC) - Electronic handwheel - Original documentation - Approximately 30 drawbars Gusdpfxjyu Rpks Alboc

Condition: excellent (used), The used SCHAUBLIN 120 VM precision parallel lathe is a medium/small sized Swiss manual lathe, 120mm center height, 600mm center distance, 25mm spindle hole. Complete machine with feeds and various equipment, already complete with electrical panel and safety devices; equipment and conditions as per photo. Gusdswqxcfspfx Albec

Condition: excellent (used), The used SCHAUBLIN 102N bench lathe is a small, high-precision Swiss manual lathe with a center height of 102mm, a center distance of 400mm, and a spindle bore of 20mm. Godpjwqxcxjfx Albsuc One machine is available (with a long bed and gear head); it is already equipped with an electrical panel and has been repaired to meet current standards. Equipment and condition are as shown in the photos.

Condition: ready for operation (used), Year of construction: 2019, spindle speed (max.): 6,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 90 mm, spindle motor power: 1,500 W, total height: 1,370 mm, total width: 800 mm, overall weight: 360 kg, product length (max.): 2,000 mm, number of axes: 2, Horizontal turning machine manufactured in 2019. This SCHAUBLIN 102Mi W25 features a W25 spindle nose and an integrated motor headstock. It includes a pneumatic clamping device and a Tripan-111S quick-change tool holder system. The machine is equipped with a 3-jaw chuck and a tailstock with a rotating center. If you are looking to get high-quality turning capabilities, consider the SCHAUBLIN 102Mi W25 machine we have for sale. Contact us for further details. • Headstock: Integrated motor • Mounting: Mounted on workbench (Version CE) • Cross-slide: Crank cross-slide with digital measurement device • Tailstock: Morse Taper 2 Additional equipment • Workbench: 2000 x 800 x 900 mm • Lista drawer cabinet: 564 x 725 x 850 mm • Pneumatic clamping device W25 with graphite distributor • Tripan-111S quick-change tool holder system • Boring bar holder, 30° angled, max Ø12 mm • 3-jaw chuck W25/Ø100 (cast iron, manual) • Tailstock accessory: Rotating center 60°, Ø18 mm (Gepy) • Collet set W25 (0.5–25 mm, 50 pieces) • Mebiflex 70 lamp • Max. Permissible Diameter Over Bed: 200 mm • Max. Permissible Diameter Over Carriage (Cross Slide): 120 mm (60 mm with rear support) • Center Height Over Bed: 102 mm • Center Height Over Carriage: 20 mm • Max. Center Distance: 470 mm • Bed Length: 1,000 mm • Bed Height: 168 mm • Main Spindle Drive: AC Motor, 1.5 kW (Continuous operation) Guedpfx Aoy Snmvslbsc • Spindle Type Options: W20 / W25 • Spindle Speed (Infinitely Variable): 100 - 6,000 rpm (min⁻¹) • Spindle Internal Diameter: 20 mm (W20) / 25 mm (W25) • Max. Bar Capacity: 14.5 mm (W20) / 19 mm (W25) • Carriage Travel (Manual) on Bed: 442 mm • Cross Travel (X-axis): 100 mm • X-axis Resolution (Radius): 0.001 mm (digital) • Longitudinal Travel (Z-axis): 90 mm (Optional: 150 mm for orientable upper slide) • Z-axis Resolution: 0.001 mm (digital) • Trapezoidal Screw Spindle: Ø 9 x 2 mm pitch • Max. Tool Shank Cross-Section: 16 x 16 mm (Multifix-System) / 12 x 12 mm (Tripan-System) • Tool Holder Diameter: 20 mm (Multifix-System) / 12 mm (Tripan-System) • Standard Tailstock: Morse 2 internal taper, 30 mm spindle outer diameter, 80 mm stroke • Lever-operated Tailstock (Optional): W20/W25 internal taper, 40 mm spindle outer diameter, 100 mm stroke • Starwheel-operated Tailstock (Optional): W20/W25 internal taper, 40 mm spindle outer diameter, 150 mm stroke • Quick-clamping Lever System (Optional): Max spindle speed 3,000 rpm • Pneumatic Clamping System (Optional): Adjustable axial clamping force, 500 daN at 5 bar, Max spindle speed 6,000 rpm • Spindle Lock: Pneumatically operated spindle lock, locking torque 48 Nm at 5 bar (Max speed 3,000 rpm) • Steady Rests (Optional): Clearance, stationary steady rest, Ø 0.01 to 40 mm • Electrical Connection: 400V, 50/60 Hz, Nominal Current 12A (Max 20A input fuse), +/- 5% allowable voltage fluctuations • Power Consumption: 1.8 kVA • Noise Level under Load at Operator Station: < 60 dBA • Operating Temperature: +15°C to +30°C (+5°C to +40°C for digital measuring devices) • Relative Humidity: 5% to 80% • Digital Measuring Unit Battery: 1x Lithium 3V, Type CR 2032 (Current consumption: 45 µA, Lifespan: 5,000 hours continuous operation) • Floor Loading: 263 kg/m² • Floor Payload Capacity: 113 kg/m² Technical Specification Counter Spindle No Driven Tools No

Condition: used, TECHNICAL DETAILS - Strokes : 320 x 150 x 375 [mm] - Distance between vertical spindle-table surface : 310 [mm] - Distance between horizontal spindle-table surface : 410 [mm] Gusdpfx Ajuhbw Nelbsc - Spindle speeds (continuous adjustment) : 58-2000 [Rpm] - Spindle taper : 30 ISO - Feeds : 12-400 [mm/min] - Fast feed up : 1200 [mm/min] - Supply : 3 x 380 [V/50 Hz] - Motor power : 1.5 [kW] - Total installed power : 2.1 [kW] - Machine floor space : 1500 x 1100 x 1600 [mm] - Machine weight : approx. 700 [kg] EQUIPMENT - Revolving vice - Irrigation system

Condition: good (used), Swing over bed 270 mm Center Height 125 mm Distance between centers 600 mm Spindle speeds 30-5000 rpm Gujdpfx Alotwpyajboc Control: FANUC 18i Manual Guide Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, machine/vehicle number: BL278700, center height: 150 mm, turning diameter over cross slide: 177 mm, spindle bore: 40 mm, turning diameter: 340 mm, spindle nose: Camlock D 1-4, type of input current: three-phase, total length: 1,730 mm, total height: 1,300 mm, total width: 970 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 55 rpm, empty load weight: 1,250 kg, overall weight: 1,250 kg, For sale is a Schaublin 150 precision lathe from Switzerland. It is considered one of the best conventional lathes ever built. The machine has been overhauled. The spindle has been fitted with new bearings. The bearing set was ordered directly from Schaublin. The slides have been scraped. Turning tests with 30mm round steel resulted in a cylindricity of 0.002mm over 200mm. A large amount of accessories is included with the machine: - Reishauer 3-jaw chuck, 2x - Original Multifix B Mivesa tool holder - Collet chuck with lever clamp - Schaublin B32 collet set, 2 to 28mm, complete in 0.5mm increments, with MK5/B32 reducing sleeve and draw tube. - Steady rests - Machine documentation with catalog - Complete standard set of change gears, plus special gears - Conventional tool holder from Schaublin - Fixed and live center - Albrecht drill chuck - Coolant system - Digital readout The machine has not been used extensively in recent years and was only used sporadically. Extremely robust construction, suitable for hard turning. Center height: 150mm Distance between centers: 630mm Spindle bore: Ø40mm Spindle speed, continuously variable: 55-3,000 rpm Feed rate: 0.05-0.35 mm/rev Spindle taper: MK5 Tailstock taper: MK3 Swinging diameter over cross slide: Ø177mm Swinging diameter over bed: Ø340mm Motor: 4.5kW Dimensions: 1,730x970x1,300mm Godpoy Uqx Hofx Albsuc Weight: 1250kg The machine can be inspected and tested under power by arrangement in 5023 Salzburg.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, LOW USAGE - GE FANUC 20-T Godpfsy U Ntpjx Albsuc

Condition: excellent (used), With DRO With step-down gear for spindle speeds Center height150 mm Distance between centers 630 mm Turning diameter over bed 340 mm Gedpfxoy Iz Ixo Albouc Spindlespeeds 55-3000 rpm Spindle bore 40 mm Pitch of leading screw 4 mm Tail stock MK5 Misc.accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 1987, Schaublin 125 C precision lathe Year: 1987 Center height 125 mm Gujdpfey Avyxex Albsc Center width 500 mm Speed 45 - 3000 rpm Feed rate 4 - 260 mm/min Spindle nose Camlock D1-3" Tailstock cone MK 2 Turning diameter over bed 250 mm Turning diameter over face slide 120 mm Top slide travel 100 mm Cross slide travel 180 mm Dimension (W x D x H) 1500 x 850 x 1300 mm Weight approx. 950 kg Accessories/options: tool holders Röhm chuck 125mm documentations

Condition: excellent (used), Swing over bed 330 mm Gedpfsy H Dkmjx Albouc Distance between centers 650 mm Spindle speeds 30-5000 rpm Spindle taper ASA A2-5 Control: FANUC 18i-T Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 1964, functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 250 mm, feed length Z-axis: 490 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 490 mm, total height: 1,720 mm, total width: 1,920 mm, total length: 2,250 mm, table width: 305 mm, table length: 1,100 mm, overall weight: 2,000 kg, space requirement width: 1,920 mm, space requirement length: 2,250 mm, space requirement height: 1,720 mm, Equipment: documentation/manual, We are offering this well-maintained Schaublin 53 milling machine, manufactured in 1964, for sale. Serial number: 271090 Technical data – Schaublin 53 N Model: N Longitudinal travel of table (X): 700 mm Vertical travel (Z): 490 mm Cross travel (Y): 250 mm Table clamping area: 1100 × 305 mm Number of T-slots: 5 Max. slot width: 14 H7 mm Spindle mounting (internal taper milling arbor): ISO 40 Spindle bore: 25.2 mm Main motor: 3 / 1500 kW·t/min Gedpfx Alsyhm D Debsuc Rapid feed motor: 1.2 / 3000 kW·t/min Power: 5.1 kW Rapid traverse speed: 3500 mm/s Dimensions (L×W×H): 2250 × 1920 × 1720 mm Weight: 2000 kg Documentation available Accessories available: Dividing head, steady rest, jaw chuck, centering point, various clamping elements and accessories If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, centre height 102 mm centre distance 450 mm spindle bore 25 mm Gjdpfswbi Hpsx Albeuc spindle speed: 220 - 2600 Accessories were not checked for completeness Cabinets are not included in the scope of delivery

Condition: used, Mechanic's Lathe SCHAUBLIN Type 102 Mach. No. 1998 Centre distance: 350 mm Bed length overall from headstock: 635 mm Gusdpey Dvf Refx Albsc Swing over bed: 200 mm Centre height over bed: 102 mm Swing over cross slide: 120 mm Centre height over cross slide: 61 mm Spindle bore: 18/20 mm Spindle speed, gear stage 1: approx. 120 / 190 / 320 rpm Spindle speed, gear stage 2: approx. 590 / 970 / 1500 rpm Chuck mounting: external thread M38 x 3 mm Tailstock taper: MT 1 Drive motor: 0.55 kW, 920 rpm Power supply: 380 Volt, 50 Hz - Spindle speeds adjustable via 2 gearbox stages and 3-step drive belt shifting - Main spindle with forward and reverse operation - Spindle mount with M38 x 3 mm thread - 3-jaw scroll chuck Ø 128 mm with stepped jaws - Collet clamping system with 6 round collets Ø 3 / 4 / 5 / 6 / 8 / 20 mm - Integrated dividing plate on main spindle with 48 / 60 / 100 holes - Toolholder slot approx. 10 x 18 mm with clamping screw - Sturdy wooden base with 42 mm laminated board Required space (with stand): L x W x H: 1160 x 750 x 1300 mm Weight with stand: 150 kg Good condition

Condition: excellent (used), For sale is a set of steady rests for a Schaublin 150 lathe. Very good condition. Includes a set of 3 roller jaws. Price is for the complete set. Shipping available or collection in 5023 Salzburg. Guodpfey Rdaijx Alboc

Condition: good (used), functionality: fully functional, pneumatic collet clamping device with collets Gusdpfx Aljy N N N Tjbsc

Condition: excellent (used), For sale is a Schaublin 125 precision lathe in exceptionally good condition with extensive accessories. The machine was never used in production and shows barely any noticeable wear. Radial and axial runout at the spindle nose is less than 0.001mm. In terms of condition, this machine is almost as new. Naturally, the machine is fully functional and has been thoroughly checked. The brake and the feed control board were recently replaced. This is a rare opportunity to acquire one of the most precise conventional lathes in outstanding condition. TECHNICAL DATA: - Centre height: 125 mm - Centre distance: 500 mm - Maximum workpiece diameter over bed: 270 mm - Maximum workpiece diameter over cross slide: 120 mm - Infinitely variable spindle speeds: 225–3000 rpm - Spindle nose: Camlock D1-3 - Spindle bore: 32 mm - Collets: Schaublin B32 - Collet pass-through: 24 mm - Chuck pass-through: 28 mm Gujdpfx Alsy Hnucebec - Bed travel: 440 mm - Carriage travel: 90 mm - Cross slide travel: 130 mm - Tailstock quill taper: Morse 2 - Tailstock quill travel: 100 mm - Automatic feeds, longitudinal & cross: 4–260 mm/min, stepless Weight approx. 950 kg Accessories: - Röhm 160 mm 3-jaw chuck - Reishauer 160 mm 4-jaw independent chuck - 160 mm 4-jaw self-centering chuck - 6x Multifix tool holders - Change gears for thread cutting - B32 collet set from 1 to 24 mm with draw tube - Machine mounts - Complete documentation including original brochure

Condition: excellent (used), Digital display Accessories available Table Usable table surface: 700 x 250 mm Travel paths X-axis travel: 320 mm Y-axis travel: 150 mm Z-axis travel: 370 mm Automatic table movements 8 longitudinal feeds: 11 to 210 mm/min Guedpfx Aeyywnfelbsc 8 vertical feeds: 11 to 210 mm/min Rapid feed of the table Longitudinal and vertical: 1000 mm/min Spindle taper: ISO 30

Year of construction: 1997, condition: ready for operation (used), - USED - CONVENTIONAL LATHE Guedpjyvlxqofx Albsc CENTRE HEIGHT: 102 mm DISTANCE BETWEEN CENTRES: 450 mm MAX TURNING DIAMETER OVER BED: 200 mm MAX TURNING DIAMETER OVER CARRIAGE: 120 mm BAR CAPACITY: 25 mm SPINDLE: 50 - 5000 rpm; 3 kW TAILSTOCK TAPER: CM 2 QUILL DIAMETER: 30 mm QUILL TRAVEL: 80 mm TURRET HEAD: MULTIFIX OVERALL DIMENSIONS: 1500 x 510 x 1550 mm

Condition: excellent (used), SCHAUBLIN 51 5AX CNC is a 5-axis machining center designed for precision, high accuracy and reliability. Working capacities: X300 Y400 Z430 mm; rotary table Ø210 mm; table load V50 H75 kg; A +30/−120°, C360°. Specs: HSK‑A63, 0–20,000 rpm, spindle motor 23 kW, feed 12,000 mm/min, rapid 30 m/min; weight ≈5750 kg; size 2700×1800×2600 mm. Tool magazine 20 places, Ø 80 mm (95 mm free), length 250 mm, tool change 3 s. Accessories: coolant system, water cooler, oil mist extractor FX4000, rinsing gun. Achieves tight tolerances; sectors: watchmaking, aerospace, medical, automotive, machine tools. Gedpfxsyxn Hve Albouc

Condition: good (used), Schaublin 102 N, machine number BL 329218, year of manufacture approx. 1998, center height 102 mm, center distance 375 mm, max. turning diameter over bed 200 mm, max. turning diameter over cross slide 120 mm, spindle speed up to 2,800 rpm, tailstock, accessories, Guodpfoy Hip Isx Albsc