Used Schaublin 102 Vm for sale (54)

Condition: used, Workspace Tip height 102 mm Centre width - with normal headstock 450 mm - with reduction gear headstock 375 mm - over the cheek 200 mm Fjdjbxkl Tspfx Aabegh - over the slide 120 mm Headstocks spindle nose for collets type Schaublin W25 spindle bore 25 mm Collet bore 20 mm Reduction ratio of the gearbox 1:5 Cheek Height x width x length 168 x 130 x 1000 mm cast iron cheek, trapezoidal profile like lathe 102 N and dovetail guide hardened and ground. Slide Largest travel on the cheek 400 mm Tool slide width - length 80 - 194 mm Path manual adjustment 90 mm Center height above tool slide 20 mm Shaft of the lathe tools 12 x 12 mm cross slide width - length 94 - 300 mm Path manual adjustment 100 mm Bed slide length of the guide on the cheek 250 mm Lead screw Guiding spindle for longitudinal turning and threading, Ø 40 mm Lead screw hardened, thread ground, pitch 4 mm Speed range Speed 270 - 3000 rpm Longitudinal turning 0.02 - 0.3 mm/rev. Thread cutting Largest pitch with standard change gear set 4 mm Machine plate for 20 metric pitches 0.25 - 4 mm Machine plate for 25 english pitches 80 - 6 G/" Tailstock Diameter of the quill 30 mm Inner taper of the quill 2 MORSE Distance of the quill 80 mm Cooling device Coolant tank - capacity 23 litres Net weights Lathe on workbench, approx. 225 kg Lathe on box base, approx. 550 kg

Condition: good (used), Center height 102 mm Distance between centers 450 mm Leit.- / feed shaft Collets W20 available Speed: about 210 - 3000 U / min reducer gear Left.- Rightrunning 2-Multistage drive L x B x H: approx 1760 x 595 x 1230 mm Weight: 650 Kg Fgodpocug H Ssfx Aabjh Different "Schaublin 102" models in stock!

Condition: excellent (used), functionality: fully functional, High-Precision Leadscrew Lathe Schaublin 102N-VM Technical Data: >> Machine No. 283152 >> Centre height: 102 mm >> Centre distance: 450 mm >> Spindle bore: 25 mm >> Longitudinal feeds: 8 steps from 0.02 to 0.3 mm/rev >> Metric threads: 20 pitches from 0.25 to 4 mm >> Imperial threads: 25 pitches from 80 to 6 TPI >> Tailstock: Morse taper 2 >> Infinitely variable speeds from 270–3000 rpm >> Weight: approx. 700 kg Fedpewvq Tmofx Aabogh Accessories: >> 3-jaw chuck, 2 sets of jaws >> Tool post with 6 tool holders >> Quick-clamping device, draw tube and 34 collets >> Coolant system >> Cutting tools, drill chuck (see images) >> Operating manual with spare parts list About the machine: For sale is a Schaublin 102VM leadscrew lathe in very good condition. The machine is, of course, fully functional. All slides operate smoothly and evenly. The 102VM runs quietly even at high speeds. The gear set for thread cutting is present, but is probably not complete. Take the opportunity to view and test the machine under power on site and see its good condition for yourself.

Condition: excellent (used), Year of construction: 2005, Schaublin 102N-VM-CF high precision Swiss lathe Year: 2005 max. admitted diameter over the bed 200 mm max. admitted diameter over the slides 120 mm Height of centers 102 mm Distance between centers 450 mm Bed length 1000 mm Bed height 168 mm Power 4.2 KW Spindle speed 100 - 3000 RPM Spindle W25 Transverse stroke, X axis 100 mm Resolution, X axis (radius) 0,01 mm Longitudinal stroke, Z axis 90 mm Resolution, X axis (radius) 0,01 mm Lead screw - 8 longitudinal feeds - Larger feeds possible when using the thread control for turning Max. cross section of tool shank (Multifix system) 10x10 mm Bar holder (MULTIFIX system) diameter 20 mm Height and side-adjustable tailstock: Internal taper of the sleeve Mk2 Spindle OD 30 mm Spindle stroke 80 mm Coolant tank capacity 23 L Electrical power supply voltage 400 V Overall dimensions: length x depth x height: 1500 x 510 x 1550 mm Fgedpfx Aasw N Rh Asbeh Accessories / options: - ACU-RITE digital readout unit, 3 axis X-Z-Z1 X resolution 0.001[mm] Z resolution 0.005[mm] Z1 resolution 0.005[mm] - Coolant system - Rear sheetmetal guard - Double Start/Stop pedal and spindle rotation direction inversion - Schaublin W25 collet set - Cast iron chuck W25 Ø110[mm] with jaws - Quick-change toolholder turret MULTIFIX-A with holders - Driving system for auxiliary equipment with BELT adjustable and swivelling belt-tensioning attachment drive device complete with motor belt Ø6x2’500[mm] - Tailstock - etc... Under power in our warehouse.

Condition: as good as new (ex-display), Schaublin lunette steady rest glasses 102VM Fjdpfjkw Drzjx Aabegh

Condition: used, Manual lever lathe SCHAUBLIN Type 102 Precision mechanic lathe Machine no. 208322 Year of manufacture: approx. 1970 Total bed length: 650 mm Center height over bed: 102 mm Center height over carriage: 53 mm Medium spindle speed: approx. 2,800 rpm (3 speed stages) Fsdpfx Aew Iq Umsabsgh Drive motor: 0.37 kW, 2800 rpm Power supply: 380 Volt, 50 Hz - Manual lever parting and grooving slide with precisely adjustable stops - Tool holder with precise height adjustment - Collet chuck device (only one collet included) - Speed change by shifting the drive belt Space requirement with stand: L x W x H 1150 x 600 x 1200 mm Weight with stand: 130 kg Good condition

Condition: excellent (used), The used SCHAUBLIN 102N bench lathe is a small-sized Swiss precision manual lathe, 102mm center height, 400mm center distance, 20mm spindle hole. 2 similar machines available (one with short bed and quick tooling and the other with long bed and gear head); already complete with electrical panel and safety devices; equipment and conditions as per photo. Fgedpfx Aswqxcxsabjh

Condition: used, manufacture Schaublin In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Fjdpfx Asw A Ap Toabjgh Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), functionality: fully functional, Precision lathe, make SCHAUBLIN, type 102 N 80 No.: BL 280280 Technical data: Data: Center distance approx. 400 mm Center height 102 mm Spindle bore 26 mm Speeds see speed diagram Width x depth approx. 1.3 x 0.5 m Machine weight approx. 0.4 tonnes Fedpew Dfbuofx Aabegh

Condition: used, TECHNICAL DETAILS - center height : 102 [mm] - Max. diameter on bench : 200 [mm] - Distance between centers : 470 [mm] - Type of spindle clamp : W20 - Boring : 20 [mm] Fsdpfx Ajw Ihttjabsgh - Passage of bar in clamp : 14.5 [mm] WEIGHT & DIMENSIONS - Machine floor space : 1500 x 800 [mm] - Machine height : 1300 [mm] - Machine weight : 500 [kg]

Condition: used, centre height 102 mm centre distance 450 mm spindle bore 25 mm spindle speed: 220 - 2600 Accessories were not checked for completeness Fodswbi Hpspfx Aabogh Cabinets are not included in the scope of delivery

Condition: good (used), Center height: 130 mm Distance between centers: 450 mm Speed: about 55-3000 U / min Fodpfx Aajcuhvuobogh Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 Control Manual control available Coolant system available Machine lamp available Machine feet Available Dimension (LxWxH): approx 1400x560x1230 mm Weight: approx 550 kg Different "Schaublin 102" models in stock!

Condition: excellent (used), The used SCHAUBLIN 120 VM precision parallel lathe is a medium/small sized Swiss manual lathe, 120mm center height, 600mm center distance, 25mm spindle hole. Fgsdpfx Aaowqxcfjboh Complete machine with feeds and various equipment, already complete with electrical panel and safety devices; equipment and conditions as per photo.

Condition: good (used), Center height: 102mm Distance between centers: 450 mm Spindle bore: 32mm reduction gear left.- Right running 2-stage drive Vario Speed: 270-3000 U / min Fsdpfx Aocpznhoabegh knee circuit Turning diameter over bed: 200 mm Spindle nose: W 20 Tailstock: MK 2 Dimension (LxWxH): approx 140x56x123 cm Weight: approx 550 kg Accessories available Guide available Different "Schaublin 102" models in stock!

Condition: good (used), Right & left rotation with knee reverse switch 2 steps Vario Headstock with reduction gearing Cross slide with 90 mm stroke Tripan steel holder 1 set of W20 collets 2 drawers lamp 380 VAC Centre distance: 350 mm Center height: 102 mm Turning-Ø over bed: 200 mm Turning-Ø over slide: 120 mm Spindle bore: 20 mm Spindle speed: 55 - 3000 rpm / infinitely variable Tailstock quill: MK 2 Weight: approx. 500 kg Machine size W x D x H: approx. 1300 x 600 x 1300 mm Different "Schaublin 102" models in stock! Fodpfsd Htvdox Aabegh

Condition: excellent (used), functionality: fully functional, Any accessories can be discussed on site Fedpfx Aev Natwsabjgh

Condition: good (used), functionality: unexamined, machine/vehicle number: 160378, turning diameter over cross slide: 180 mm, spindle bore: 40 mm, turning diameter: 375 mm, center height: 160 mm, turning length: 750 mm, total length: 2,500 mm, total width: 1,000 mm, total height: 1,500 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 38 rpm, overall weight: 2,500 kg, - Operating voltage: 380 V Fsdpfx Aasv Irh Dsbjgh - Largest workpiece diameter over cheek: 375 mm - Largest workpiece diameter over cross support: 180 mm - Spindle taper: Morse 5 - Collet passage: 24 mm - Fine feeds longitudinal and transverse: 0.015 to 0.21 mm/rev - Longitudinal and transverse feeds: 0.025 to 0.35 mm/rev - Cross support path on the cheek: 750 mm - Tool slide path: 120 mm - Cross slide path: 215 mm - Center height above tool slide: 32 mm - Steel cross section: 20 x 20 mm - Tailstock quill taper: Morse 3 - Quill path: 120 mm - Lateral adjustment: +/- 10 mm Equipment: - Incl. documentation - Matching workshop cabinet including accessories

Condition: used, Year of construction: 1999, max. bar material dia. 42 mm max. turning diameter 180 mm turning length 350 mm control FANUC 18i Main-/Counter -spindle turning speeds 6.000 U/min number of tapers in turret head 2 x 12 tool taper VDI 25 travel -x axis 170 mm travel -z axis 350 mm CNC Turning- and Milling Center | SCHAUBLIN - 42S TM-6 with main and sub-spindle, 2x turrets aligned for driven tools and equipped with a bar feeder. The machine has 7.856h running hours. The machine is in good condition and can be inspected under power. For further technical details, please refer to the attached offer. Fgedpfx Aexlugmeabjh - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 42STM-6 | 42STM | 42STM6 | 42 S TM-6

Condition: good (used), Swing over bed 270 mm Center Height 125 mm Distance between centers 600 mm Spindle speeds 30-5000 rpm Fedpfx Aaetwpyasbegh Control: FANUC 18i Manual Guide Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 1968, Precision lathe, turning machine, lathe, center lathe, center lathe -Manufacturer: Schaublin, lead screw and feed screw lathe type 135 -Machine bed: hardened -Turning length: 750 mm -Turning Ø over bed: 315 -Turning Ø over recess: 355 mm -Turning Ø over support: 150 mm -Spindle bore: Ø 34 mm -Spindle speeds: 45 - 3000 rpm Fgjdpfx Aew Rd Hbjabsh -Wedge bar chuck: Forkardt Ø 160 mm -Tailstock mount: MK3 -Drive: 1.5/3.0 kW -Accessories: Drawer cabinet with 2x steady rests, 28x Multifix tool holders, collets, see photos -Lathe dimensions: 960/1700/H1290 mm -Weight of lathe: 1230 kg -Dimensions cabinet: 480/725/H1000 mm -Cabinet weight: 222 kg

Condition: good (used), Working travels 300 x 150 x 355 mm Table size 700 x 250 mm Spindle taper for collets ISO 30 Spindle speeds 58-2'000 rpm Fgsdpfxeu Eqixo Aabsh Digital read-out Misc.accessories MARCELS MASCHINEN CH

Condition: excellent (used), Center height 125 mm Distance between centers 500mm Fedpfolyrcijx Aabogh Spindle speeds 40-3000 rpm Several accessories MARCELS MASCHINEN CH

Condition: excellent (used), With NC dividing head Working travels 600 x 510 x 510 mm Spindle taper BT40 Spindle speeds -12'000 rpm Tool changer 20 Pos. Control SIEMENS 810D Shopmill Coolant through spindle Zero point clamping system Misc. accessories Fedpfx Aaswhlcmjbegh MARCELS MASCHINEN CH

Condition: good (used), Digital read-out With milling and drilling head Working travels 330 x 400 x 475mm Table size 650 x 245 mm Spindle taper for collets ISO 40 Spindle speeds 63-2'800 rpm Fedpfew Nnutex Aabsgh Misc.accessories MARCELS MASCHINEN CH

Condition: excellent (used), Sub-spindle, C-axis FANUC 18i-TB control Fgedpowufdqofx Aaboh Turning diameter max 300mm Turning length -366mm Spindle speeds main spindle 30-5000 rpm Spindle speeds sub spindle 30-6000 Turret head: 12 driven positions C-axis Dividing 0.001 degrees Misc. accessories MARCELS MASCHINEN CH