Used Schechtl Hbm 310 for sale (28)

Condition: good (used), Schechtl HBM 310 The machine is equipped with: ✅ a rolling shear ✅ a foot pedal for single-person operation ✅ an angle stop for consistently accurate bending Cjdezxrwvopfx Aptehb ✅ a support grid with depth adjustment ✅ a 15mm insert strip for the bending jaw Condition: • very good technical condition • very good visual condition • immediately available, no delivery time required • weight: 1480 kg An inspection and test run can be arranged.

Condition: used, functionality: fully functional, Year of construction: 2013, degree of automation: semi-automatic, actuation type: electric, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 20 mm, back gauge: 1,000 mm, input current: 60 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: angle stop, documentation/manual, emergency stop, foot remote control, We are offering this used Schechtl MBM 310/ECT pivoting bending machine, manufactured in 2013. Year of manufacture: 2013 Chsdpfx Ajzrabisptsb Model: MBM 310/ECT Serial number: MA6239 Capacity: 1.00 mm Three-phase frequency: 50 Hz Machine rated current: 60 A Wiring diagram number: 300.000 Order number: 20.013 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: new, Year of construction: 2026, • efficient, quiet and powerful mechanical machine • fast processes as in the case of MAX and MAB machines • maximum free space for material bending thanks to the F-geometry for the bending beam • Possibility to make omega profiles without additional tools • 1 top bar 20°, radius 1 mm, 66/24 mm • 1 bending bar 10/100 mm and 24/100 mm • operating pedal • soft start of the bending beam • mechanical stop with a working length of 6-1000 mm • 32 A plug + 5 m power cord for EU Chjdolbilvepfx Apteb • supply voltage: 3 x 400 V, 50 Hz for EU Thickness of bent sheet 1.5 mm steel sheet for 3000 mm length

Condition: new, Year of construction: 2026, MBM series machine • easy start-up in the engine efficiency class • designed for smooth and efficient one-person operation Csdswf Hghepfx Aptjhb • produce complete profiles in one operation and repeat them exactly at any time • Wear-free and maintenance-free direct eccentric drive Standard equipment: • 1 sharp rail 20°, radius 1 mm, offset, 66/24 mm for the pressure beam • 1 insert rail 68/10 mm and 68/24 mm for the bending beam • Motorised rear stop 6-750 mm • foot switch • 16 A connection plug with 5 m cable (within the EU) • connection voltage: 3 x 400 Volt, 50 Hz (within the EU)

Condition: new, Year of construction: 2026, Quick reverse movement, high cutting capacity with low power Strong steel welded frame structure Maintenance-free guides and bearings. Operating pedal, safety buttons Chjdpfx Apjl Exypjteb Front material support up to 920 mm 5m 32Amp cable to power the machine CE certificate Automatic stop with digital position readout, length 0 - 750 mm with pneumatic sheet support system with rear material pick-up compressed air connection required min. 6 bar

Condition: new, Year of construction: 2026, • efficient, quiet and powerful mechanical machine • fast processes as in the case of MAX and MAB machines • Possibility to make omega profiles without additional tools • 1 top bar 20°, radius 1 mm, 66/24 mm • 1 bending bar 10/68 mm and 24/68 mm • operating pedal • soft start of the bending beam • mechanical stop with a working length of 6-1000 mm • 32 A plug + 5 m power cord for EU • supply voltage: 3 x 400 V, 50 Hz for EU Thickness of bent sheet 1.5 mm steel sheet for 3000 mm length Codpfx Aolbimaoptjhb

Condition: good (used), Year of construction: 2011, Well-maintained, used CNC swiveling bending machine by Schechtl. Type: MAE 400 CNC Chjdpfx Aozykyxoptjb Capacity: 4040 x 2 mm (Aluminum 3 mm, Stainless steel 1.25 mm, Copper 2.5 mm, Zinc 3.5 mm) Electrically adjustable back gauge up to 1000 mm Machine was refurbished by Schechtl in 2023.

Condition: good (used), Year of construction: 2011, Well-maintained, used plate shear from Schechtl. Type: MSC 400 NC Capacity: 4040 x 2.5 mm (aluminum 4 mm, stainless steel 1.5 mm) Electrically adjustable back gauge up to 750 mm with a support table for delivering the cut sheet at the front. The machine was refurbished by Schechtl in 2023. Cedpfozyirmjx Aptjhb

Condition: used, Year of construction: 2010, gebraucht 2010 080065 prompt, Zwischenverkauf v Deutschland 29800 € 1 2040 mm 3 mm 2 mm 4.5 mm Motorisch 1.5 kW 1.1 kW 3060 mm 1650 mm 1500 mm 2730 kg 750 mm 140 mm 50 °/sek CNC control ECT (Schneider Magelis) - Input of bending angle, depth stop dimension, lifting height, folding, precut - max. 36 bending angles can be saved per set - max. 510 sets can be saved - comfortable 7.5" color touch TFT monitor - Power mode for material-friendly operation - Soft start of the bending beam and the depth stop - Visual user guidance in the event of faults (diagnosis center) Csdpfxowiri Aj Aptjhb - Selection of different languages ??such as German, English ... CNC back gauge - Back gauge range 6 - 750 mm - Drive via belt - 6 stop fingers - support plates with brushes Sectioned goose neck rail height 75 mm Additional 10 mm rail on the bening beam Flat rail R 1 mm Flat rail R 2 mm Mechanical drive via gear brake motor Upper beam drive via double eccentric Foot pedal Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: good (used), Schechtl HT 200 The machine is equipped with: ✅ a depth stop ✅ capacity: 1.25 mm steel sheet ✅ working width: 2035 mm Condition: • very good technical condition • good visual condition • immediately available, no lead time Csdszx Uliopfx Aptehb • weight: approx. 650 kg An inspection and a test run are possible by arrangement.

Condition: excellent (used), Schechtl CNC pivoting bending machine MAB 310 CNC in top condition (please note that the matching shear is also available) 3m x 2mm – in excellent condition with CNC control and depth stop. The pivoting bending machine is in very good technical and optical condition. Csdpfxjzv H Abs Aptshb Ideal for sheet metal workers, roofers, carpenters, metalworkers, or workshops looking for a precise and reliable bending machine.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 18402, Offer 26114 Chodpfx Apjy D Rxreteb Technical Data: - Bending operation is performed manually, assisted by counterweight - Clamping of the upper beam via side eccentric lever and foot pedal - Max. working width: 2040 mm - Max. material thickness St 40: 1.00 mm - Bending angle adjustment via end stop: 10 - 180° - Max. stroke of upper beam: approx. 70 mm - Max. adjustability of bending beam: 10 mm - Space requirement: approx. W 2800 x H 1200 x D 900 mm - Weight: approx. 520 kg - Various bending rails as depicted

Condition: used, Year of construction: 2010, working width: 2,000 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness stainless steel (max.): 1 mm, sheet thickness aluminum (max.): 4 mm, overall weight: 2,030 kg, We offer this used Schechtl MAX 200/CNC S-10007 pivoting bending machine, manufactured in 2010. Manufacturer: Schechtl Model: MAX 200/CNC S-10007 Year of manufacture: 2010 Chsdpfx Aozilx Ioptob Serial number: MA5726 Sheet metal thickness capacity: 2.50 mm - Technical specifications: Bending length: 2,000 mm Steel: 2.5 mm Aluminum: 4.0 mm Stainless steel: 1.5 mm Weight: 2,030 kg If you have any questions or require further information, please feel free to send us a message or call us. “The machine is sold according to Incoterms® 2020 EXW [Frankenweg 2, 9100 Völkermarkt]. From the moment the machine is made available at the designated location, the buyer bears all costs and risks, including loading, transport, and customs formalities.”

Condition: good (used), You are bidding on: a high-quality sheet metal shear and bending machine from a very reputable manufacturer – Schechtl. Features of the machine: Sheet metal shear HT 200 Capacity: 1.25mm steel, aluminum, etc. Cutting length: slightly over 2m Holder for round bar (properly attached to the machine; if desired, we also have round bars in various lengths available as an option) Extendable front support Invoice with VAT shown Bending machine KS – Capacity: 1mm steel, aluminum, up to approx. 1.5mm Bending length: slightly over 2m Foot clamp Optional: back gauge or beading device Attachment rail Round rollers and other rails According to §25a UStG The machines are in good used condition and are ready for immediate use. They come from a private owner and a small business (50/50). Important! Optionally, you can find and purchase many machines and machine accessories, such as various rails, back gauges – everything related to sheet metal and steel processing, including bending machines, sheet metal shears, drilling machines, round machining machines, slitting and profiling machines – accessories (beading device, round rollers for gutter production, back stop, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. Please feel free to contact us if you have any questions. You will receive an invoice according to §25a UStG, which includes the sales tax – differential taxation. Free loading is possible – weight approx. 750 kg and 650 kg. Inspection and testing are possible and welcome after prior telephone arrangement. Codpfxozgua Ao Aptehb Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 highways. Article number: Bending machine KS & HT.

Condition: good (used), You are bidding on: a branded device – a press brake, from a very good and well-known manufacturer – Schechtl. New list price 2024 – see pictures (now more expensive again) €18,490 net, excluding the radius beam. Features of the device: Press brake Schechtl HA Beam bends cleanly – testing possible Degree indicator Bending length slightly over 2m Sheet metal thickness 2 mm steel – sheet – aluminum, zinc, etc., up to approx. 3 mm Beam radius for aluminum, zinc is installed – a sharp beam is also included (see picture)! Optional: depth stop Sheet metal shear HT 200 or sheet metal shear Schröder electric 2m - 2.5mm would be optional. Important! Optionally, you can find and purchase many machines and machine accessories, such as various beams, depth stops – everything related to sheet metal and steel processing, such as press brakes, sheet metal shears, drilling machines, rounding machines, slitting and profiling machines – accessories (beading device, round rollers for gutter production, backstop, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. I am always available to answer your questions. You will receive an invoice in accordance with §25 a UStG – the value-added tax is included in the invoice amount. Subject to differential taxation. Free loading is possible – weight approx. 1450 kg. Chodezgt Nvspfx Aptsb Inspection and testing are possible and welcome after a telephone appointment has been arranged. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer himself (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97261 Güntersleben Article number: Press brake HA 200

Condition: new, Year of construction: 2026, Efficient, quiet, and powerful mechanical machine Technical specifications: Working length: 4040 mm Total length: 5352 mm Depth: 2232 mm Working height: 950 mm Total height: 1924 mm Weight: 5,000 kg Maximum bending thicknesses: Steel: 1.5 mm Aluminum: 2.00 mm Stainless steel: 1.00 mm Copper: 2.00 mm Galvanized sheet: 3.00 mm Standard equipment: • 1 bending rail, 20° with sharp nose, radius 1 mm, offset, 66/24 mm for the clamping beam • 1 insertable rail, 10/100 mm and 24/100 mm for the bending beam • Foot switch (MAF 400/CNC model delivered with a second foot switch) • Soft start for the bending beam • Electrically driven back gauge, 8-1000 mm • 5 m power cable with 32 A mains plug (EU version) • Supply voltage: 3 x 400 V, 50 Hz (EU version) CNC S-Touch control: From profile concept to bending precision in record time Standard features at no extra charge: • Graphical display of the bending sequence for the selected program • Graphical representation of sheet position before every bend • Operator guidance – each work step visually explained via the graphic control system • Programming without submenus • Profile correction by direct touch in the desired section of the profile • Programmable angle correction • Set repeat cycles for special radius arcs • Cutting program for RSL rotary shears • Easy mode for: single bends, back gauge, bending angle, lifting height, closing edges • Profile search possible by name, sketch selection, and profile drawing on the touchscreen • 21.5-inch LCD touchscreen with best-in-class graphics • USB port for program backup and transfer • Non-volatile memory for over 3,000 programs • Freely assignable program names (profile names) • Registration of produced quantities and machine operating time • 16 languages • Remote support (Team Viewer) • Soft start for bending beam • Back gauge with drive, 6-1000 mm • Foot switch For EU market: Chjdpfx Aox Hyhbjptob • 16 A plug with 5 m power cable • For MAF and MAZ models, 32 A plug with 5 m power cable

Condition: new, functionality: fully functional, Year of construction: 2026, Technical specifications: Working length: 4040 mm Overall length: 4858 mm Depth: 2592 mm Working height: 920 mm Total height: 1430 mm Weight: 3450 kg Chodpox Hykvjfx Aptjb Maximum cutting thickness: Steel: 2.5 mm Aluminum: 4.00 mm Stainless steel: 1.5 mm Standard equipment: ▪ Mechanical backgauge, range 0 - 750 mm, with pneumatic sheet support system; front or rear material discharge ▪ Required compressed air connection: minimum 6 bar ▪ 4 front support arms, 1000 mm, with T-slot and metric scale ▪ 2 front sheet supports, square bar type, positioned on the left and right sides of the machine, with T-slot and metric scale ▪ Blade clearance adjustment with scale ▪ Controller with digital readout (memory for 99 six-step programs) ▪ Rigid welded steel frame. Maintenance-free linear guides and bearings. ▪ Foot switch ▪ CE certificate NEW! Option to install a conical backgauge Advantages: Fast return stroke, high cutting capacity Rigid welded steel frame Maintenance-free linear guides and bearings.

Condition: ready for operation (used), Year of construction: 1955, gr. Working width: 2040 mm for sheets up to: 1 mm Cedpfxetgf Nkj Aptshb Weight: approx. 680 kg Space requirement: 2650 x 650 x 1180 mm

Condition: excellent (used), You are bidding on: a high-quality plate shear and bending brake from a very good and well-known manufacturer – Schechtl. Features of the machine: Plate shear HT 200 Capacity: 1.25mm steel, aluminum, etc. Cutting length: slightly over 2m (blade in top condition, see photos; original lettering still present, which may fade after frequent cutting) Back gauge Light bar with LED for cut line illumination Adjustable front support Bending brake KS – Capacity: 1mm steel, aluminum, up to approx. 1.5mm Bending length: slightly over 2m Foot pedal Optional: back gauge or beading tool Attachment rail Round dies and other dies According to §25a UStG The machines are in good used condition and are ready for immediate use; they come from a private collection. Important! Optionally, you can find and purchase many machines and machine accessories in our shop, such as various dies, back gauges – everything related to sheet metal and steel processing, including bending brakes, plate shears, drilling machines, slitting and profiling machines, accessories (beading equipment, round dies for gutter production, back stops, etc.), and other hand tools and spare parts from many top manufacturers. I am always available to answer your questions. You will receive an invoice according to §25a UStG, which includes the value-added tax – differential taxation. Free loading is possible – weight approx. 750 kg and 650 kg. Cjdpfx Apey T H Nxotshb Inspection and testing are possible and recommended after scheduling an appointment by phone. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Article number: Bending brake KS 260504 & HT 260505

Condition: good (used), You are bidding here on a branded guillotine shear and folding bench from a very reputable and well-known manufacturer – Schechtl. Device specifications: Guillotine Shear HT 200 - Capacity: 1.25mm steel, aluminum, etc. and more - Cutting length: just over 2m - Depth stop - Front support, extendable Folding Bench - KS model – Capacity: 1mm steel, aluminum and more (up to 1.5mm) - Bending length: just over 2m - Foot-operated closer - Optional depth stop or beading attachment - Round rollers and additional guide rails included - Sale according to §25a UStG Optionally, I offer the possibility to purchase a segment bending bench from the top manufacturer Cidan – likely the market leader. Cidan Machinery also includes Thalmann (top manufacturer of long folding machines) and Forstner (leading slitting line manufacturer). This is the heavy-duty version – 1m / 2mm steel - Aluminum and more significantly higher capacity - Triple-segmented - Angle display - Foot-operated closer - Storage box Note: The segment bending bench can be purchased in addition to any of my machine sets, but will not be sold separately. Additional price available upon request. The machines are in good and clean condition and ready for immediate use. They come from private ownership. Important: Optionally, you can find and purchase many machines and accessories for sheet metal and steel processing – such as folding benches, guillotine shears, drill presses, roll bending machines, slitting and profiling machines, accessories (beading device, round rollers for gutter production, back gauge, etc.), as well as additional hand tools and spare parts from leading top manufacturers in our shop. If you have any questions, I am always available to help. You will receive an invoice according to §25a UStG. The invoiced amount includes VAT (differential taxation applies). Codpeyw Si Esfx Aptohb Free loading available – weight approx. 750 kg and 650 kg. Inspection and testing by appointment via phone is possible and encouraged. Payment in cash upon collection. Take advantage of our experience and expertise – we are happy to advise you. Collection by the buyer (or by a transport company commissioned by the buyer) should occur within 10 days after the auction ends. Location: 97249 Eisingen, approximately 3 minutes from motorway A3 and A81. Item number: Folding Bench KS and HT

Condition: good (used), You are bidding on: a high-quality sheet metal shear and bending machine from a very reputable manufacturer – Schechtl. Features of the machine: Csdpfx Asy Tafyjptjhb Sheet metal shear HT 200 Capacity: 1.25mm steel – aluminum, etc., and more Cutting length: slightly over 2m Back gauge Adjustable front support Bending machine KSV – Capacity: 1.5mm steel – aluminum, approx. 2mm Bending length: slightly over 2m Foot clamp Optional: back gauge or beading device Rounding rollers and additional dies In accordance with §25a UStG The machines are in good, used condition and are ready for immediate use; they come from a private collection. Important! Optionally, you can find and purchase many machines and machine accessories in our shop, such as various dies, back gauges – everything needed for sheet metal and steel processing, including bending machines, sheet metal shears, drilling machines, rounding machines, slitting and profiling machines – accessories (beading device, rounding rollers for gutter production, back gauge, etc.), as well as other hand tools and spare parts from many top manufacturers. I am always available to answer your questions. You will receive an invoice in accordance with §25a UStG, which includes VAT – differential taxation. Free loading is possible – weight approx. 950 kg and 650 kg. Inspection and testing are possible and welcome after scheduling an appointment by phone. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 highways. Item number: bending machine KSV 260506 and HT 260507.

Condition: used, functionality: fully functional, Year of construction: 1988, Schechtl guillotine shear Chedoy I Uulspfx Aptsb With signs of use, but operates flawlessly

Condition: good (used), You are bidding on: a branded folding machine from a very reputable and well-known manufacturer - Schechtl Device features: Schechtl KSV folding machine – reinforced model Rail bends cleanly Angle display Bending length just over 2m Sheet thickness 1.5 mm – suitable for aluminum, zinc, etc., more than 2 mm possible Standard rail - radius for aluminum, zinc is also available as an option Round rolls as shown in the picture Optional: depth stop 500, additional rails Schechtl guillotine shear Useful length 2m Sheet thickness 1.5mm – more for aluminum Depth stop 500 mm Extendable sheet support Optional: additional accessories and tools available, such as bead forming device, tube bars and holders, tools, etc. Matching manual guillotine shear also available, please request a price for the set if interested, I will then configure it for you. Important! Optionally, you can find and purchase many machines and machine accessories, such as various rails, depth stops – everything related to sheet metal and steel processing like folding machines, guillotine shears, drilling machines, round bending machines, slitting and profiling machines, accessories (beading device, round rolls for gutter production, back gauge, etc.), as well as other hand tools and spare parts from many top manufacturers, all in the shop. I am always available for questions. You will receive an invoice with VAT shown separately. Free loading possible – weight approx. 950 kg and approx. 1000 kg Inspection and testing are possible and welcome by telephone appointment. Payment in cash on collection. Take advantage of our experience and expertise, we are happy to advise you. Collection by the buyer (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97261 Güntersleben Codpfxoy Rtb As Aptjhb Item number: Folding machine KSV / Guillotine shear MT

Condition: good (used), You are bidding here on a branded guillotine shear and a folding machine from the well-known German manufacturer Schechtl. Device features: - Guillotine Shear MSB 200: - Cuts 3 mm steel – significantly more for aluminum - Cutting length: slightly over 2 m - Front support table - 500 mm back gauge - Optional sheet metal tray - Free loading available - Folding Machine Schechtl MAX 200: - Rail bends cleanly – test possible - Degree indicator - Bending length: slightly over 2 m - Sheet thickness: 2.5 mm (steel, sheet metal, aluminum, zinc, etc., higher for softer materials) - Standard rail – special radius rails for aluminum and zinc available upon request (add-on and special rails) - Foot pedal operation - Optional back gauge We also have available: Schechtl MSB 200, Schechtl MA 200, Schechtl HA 200 (2 mm), segmented RAS 2 m / 2 mm, and many others from 1 to 6 m. You will receive an invoice with VAT shown separately. Shipping can be arranged upon request. Free loading as shown in the pictures. Inspection and testing possible by prior phone appointment. Cjdoyviwqopfx Aptohb Payment in cash upon collection – if you need anything else, please give me a call. Thank you! Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway) Item numbers: 251007 and 251008

Condition: good (used), I offer here a set from Schechtl Folding bench KS with foot closer and guillotine shear HT 150 Both have a capacity of 1.5mm iron - aluminum significantly more Codpfxjudbzms Aptohb Working length a little over 1.5m Plate shears with depth stop guillotine shears with high quality front support with blade (optional spare blade available)