Used Scissors Shape for sale (3,298)

Condition: new, Integrated pre-separator Integrated automatic extinguishing system Efficient and economical: large-volume compressed air tank with with fast-switching diaphragm valves for effective OPTI JET filter cleaning and minimum compressed air consumption. So simple and so effective: OPTI JET cleaning and bag filter with bag filter with snap ring lock. Knedpfxju R S A Rs Aabjc Extremely economical: Energy-efficient drives in accordance with IE3 Safe in the event of an emergency: Maintenance-friendly automatic extinguishing system. Peace and quiet: the soundproofed air recirculation system from AL-KO. All options are open: PLC control for manual and automatic automatic operation. Countless options from machine detection to slide control to frequency-controlled operation operation, to name just three examples. Nothing goes wrong: Collecting container with inspection window. Practical down to the last detail: container lock with ergonomically ergonomically shaped clamping lever. Can be retrofitted: conversion to discharge via briquetting press briquetting press or rotary feeder possible. - High suction capacity - little space requirement - 100 % air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control unit - Optimum filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust bulkhead for dust-free container change - (optional: safety interlocking of the containers) - Freely configurable module replacement and expansion options ----- Technical data ----- Extraction nozzle Ø: 300 mm, Nominal volume flow: 5,089 m³/h, max. volume flow: 6,000 m³/h, max. negative pressure: 2,587 Pa, Filter area: 30 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 7.5 kW, Dimensions (LxWxH): 3,000 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 838 kg, according to: GS - HO - 07 - new exhibition machine -

Condition: ready for operation (used), functionality: fully functional, This is an original ABB robot controller cabinet offered without internal wiring or electronic components. Ksdpfx Aasxc Nbmebjnc The cabinet is empty; no power modules, wiring, or controller boards are included. Compatible with various ABB robot controller series Condition: Used, in good physical shape.

Condition: used, The Volpato LS 1N is a universal machine designed for sanding edges, profiles, and shaped components made of wood as well as other materials. It combines user-friendly operation with high versatility – it can be equipped with a sanding belt, sanding disc, or milling unit. The robust construction and high-quality Italian workmanship ensure long service life and reliable performance even under demanding conditions. Kodpfxexlquto Aabsnc The machine features chain feed with stepless speed control from 4 to 20 m/min, pneumatic belt tensioning, and an oscillation system for even abrasive utilization. Precise adjustment of the pressure shoe allows for both fine contour sanding and precise calibration. Technical Data Sanding Belt Belt size: 2450 × 80 mm Unit tilt: 0–135° Belt speed: 7–14 m/s (2 speeds) Motor: 1.5 kW Oscillation: 0–20 mm Extraction port: Ø 100 mm Net weight: approx. 100 kg Sanding Disc Max. diameter: 220 mm Max. width: 90 mm Unit tilt: 0–180° Rotational speed: 900 rpm Motor: 1.5 kW Extraction port: Ø 100 mm Net weight: approx. 90 kg Milling Unit (optional) Cutter diameter: 140–160 mm Unit tilt: 0–90° Rotational speed: 0–6000 rpm (with inverter) Motor: 4 kW Spindle diameter: 35 mm Extraction port: Ø 100 mm Net weight: approx. 90 kg Feed System Type: Chain drive with rubber inserts Feed speed: 4–20 m/min (infinitely variable) Dimensions and Weight (LS 1N model) Length: 2450 mm Height: 1400 mm Depth: 1900 mm

Condition: used, Year of construction: 2020, The sausage production line consisting of two modern machines, VEMAG HP20E and VEMAG FSL210, is an efficient solution for meat processing plants looking for reliable equipment to automate the sausage filling and forming process. Both machines, manufactured by the renowned VEMAG Maschinenbau GmbH, guarantee high quality, durability, and precision. VEMAG HP20E vacuum filler The VEMAG HP20E vacuum filler ensures even portioning of stuffing with different consistencies. With 23 kW of power and an efficient vacuum system, the machine works reliably even during intensive production. Kedjxpgtgspfx Aabenc VEMAG HP20E specifications: Year: 2015 Power: 23 kW Power supply: 3x400V, 50/60 Hz Capacity: up to 6,300 kg/h Portion weight: 1-99,000 g Air consumption: 40 l/min Air pressure: 5-6 bar Construction: stainless steel VEMAG FSL210 – sausage line with grinding head The VEMAG FSL210 is an automatic sausage production system that enables precise filling, portioning, and linking of casings. The device guarantees high performance and consistent quality of finished products, while remaining easy to operate and quick to clean. VEMAG FSL210 specifications: Year of manufacture: 2015 Power: 7 kW Portioning capacity: 800 portions/min, depending on the casing, caliber, and weight Portion length: From 55 mm – no restrictions, single cut / From 40 mm – no restrictions, for 2 or more sausages Power supply: 3x400V, 50/60 Hz Weight: 548 kg Capacity: up to several thousand pieces/hour Construction: stainless steel Advantages of the VEMAG HP20E + FSL210 line: High production capacity for both fresh and cooked sausages Precise portioning and linking of casings Easy operation and simple maintenance Robust and hygienic stainless steel construction Ideal solution for medium and large meat processing plants This line allows for the automation of the sausage production process, minimizing raw material losses and guaranteeing consistent product quality.

Condition: used, Used Complet Bitzer Co2 Cooling installation for processing rooms and or corridors This unit, in excellent condition, is equipped with the following main components: 1. Compressors Rack Teko ROXSTA 2.O, with 4x Co2 Compressors Bitzer 4DTC-25K-40P, and 1x Co2 Compressor 4FTE-20K-40S, and original control cabinet - Compressors Type: 4DTC-25K-40P (x4), 4FTE-20K-40S (x1) - Volume: 21.2 m3/h (x4), 17.5 m3/h (x1) - Cooling capacity for CO2: 264.5 kW at -5°C/30°C, 222.6 kW at -10°C/30°C, 153.5 kW at -20°C/30°C - Dimensions of the compressors rack: 3300 x 950 x 2200 mm - Control cabinet dimensions: 1350 x 950 x 2000 mm - Year of production : 2018 2. Evaporators - 5 pieces Guntner S-DHN 051C/24 dual discharge, full steinless steel ( Housing and block made of stainless steel ) - Type: S-DHN 051C/24- - Cooling capacity: 18.9 kW at DT8, 15.3 kW at DT7 - Surface: 101.9 m2 - Air flow: 11 240 m3/h - Fin spinning: 4 mm - Fans: 2 x 510 mm - Dimensions: 2550 x 1560 x 480 mm - Housing and block made of stainless steel - Year of production: 2019 - Volume: 25.7 L - Weight: 149 kg - Quantity : 5 pieces - Year of production : 2019 3. Evaporators - 3 pieces Guntner S-CXDHN 046C/37 dual discharge, full steinless steel ( Housing and block made of stainless steel ) - Type: S-CXDHN 046C/37 - Cooling capacity: 21.9 kW przy DT8, 17.7 kW przy DT7 - Fin spinning: 7 mm - Fans: 3 x 460 mm - Dimensions: 2950 x 1560 x 480 mm - Housing and block made of stainless steel - Year of production: 2021 - Volume: 29.9 L - Quantity: 3 pieces - Year of production : 2021 4. Evaporators - 1 pieces Guntner S-CXDHN 046C/37 dual discharge, - Type: GADC CX 035.1/41M/HEC7E.TNNN - Fin spinning: 7 mm - Fans: 4 x 350 mm - Dimensions: 3150 x 1000 x 300 mm - Electric defrost - Year of production: 2024 - Volume: 14.2 L - Quantity : 1 piece - Year of production : 2024 5. Evaporators - 4 pieces Guntner GACC CX 040.1/3-70.E-1845718M, standart cubic evaporators - Type: GACC CX 040.1/3-70.E-1845718M Kedpsxpvtcsfx Aabjnc - Cooling capacity: 17.8 kW at DT8, 14.4 kW at DT7 - Surface: 63.3 m2 - Air flow: 8 640 m3/h - Fin spinning: 7 mm - Fans: 3 x 400 mm - Dimensions: 2370 x 550 x 580 mm - Electric defrost - Year of production: 2019 - Volume: 11.1 L - Weight: 114 kg - Quantity : 4 pieces - Year of production : 2019 6. Gascooler Guntner GVD080.4C/2x3-EK.E, V-shape - Type : GVD080.4C/2x3-EK.E - Year of construction : 2018 - Volume : 60,2 ltr - Fans: 6x 800 mm, 490 RPM, with inverter - Dimensions: 4500 x 2320 x 2850 mm

Condition: used, Year of construction: 2014, operating hours: 292 h, 2014 | Genie GS-2032 (8 m) | Used Scissor Lift | 292 hours 📍Location: Germany, Kulmbach 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 5900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 25 inspection points 25 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Knsdsxntifspfx Aabec The machine in good, working condition. No issues were identified during the inspection. The battery is older, and was working for the duration of the inspection. It could not be verified if the batteries still sufficiently hold their charge for normal application or if new batteries should be fitted. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38263 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: reconditioned (used), Fortuna model 4 - used - after overhaul - weight range 40-120 g - 3 plates - power supply 400 V - 6 months warranty Kedsxp Hmmjpfx Aabjnc - collection from warehouse / shipping option - price on request

Condition: used, Year of construction: 2010, · Working area: 2700 x 1300 mm · Travel X-Y: 3070 x 1750 mm · Travel length Z-axis: 270 mm · Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The layout of the machine allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The working unit is in turn attached to this mobile unit carrier on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit F12: Drilling head with 12 + 6 spindles · 7 individually accessible vertical spindles in X · 5 individually accessible vertical spindles in Y · 4 horizontal spindles in X (2 + 2) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm (6,000 rpm optionally available) · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fit · pneum. Feed stroke: 60 mm Grooving saw unit in "X" · Integrated in the drill head · Grooving saw blade with a diameter of up to 120 mm Main milling unit: · Tool holder HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 6.6 kW (9 HP) from 12,000 rpm (S1) · Motor power 7.5 kW (10 HP) from 12,000 rpm (S6) · Right / left rotation · Ceramic bearings (other power classes are optionally available) Tool changer R4 Automatic tool changing device for 4 tools. Traveling on the rear unit carrier to allow quick access to the tools. · Number of tool positions: 4 · Max. tool diameter: 120 mm · Max. weight per tool: 4.5 kg · Max. total weight of all tools: 16 kg · Mount for 1 angle gear · Traveling in X (other and larger tool changers are optionally available) Work table The work table is designed to guarantee the operator maximum freedom of movement. The quick vacuum clamping system ensures maximum flexibility with exact positioning and optimal hold of the workpieces. · 6 supports 1000 mm continuously pneumatically adjustable in X · 12 round vacuum suction cups D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) 1 stop in Y per support (6 in total) · The retractable reference stops are controlled by CNC · Pendulum machining as standard (2 work areas) --- other clamping systems are optionally available --- Axis movement The drive system in X, Y and Z is via ground recirculating ball bearings of the highest precision class. Such characteristics are important to ensure balanced movement even with more complex work. The movement of the various axes is carried out by brushless three-phase servo motors / brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These features make this type of drive completely maintenance-free. · Rapid traverse in Kodpsxnld Isfx Aabonc

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 193 h, load capacity: 200 kg, empty load weight: 2,700 kg, construction height: 1,990 mm, fuel type: electric, total length: 2,820 mm, drive type: Elektro, arm reach: 3,000 mm, construction width: 990 mm, working height: 9,900 mm, Vertical lift platform Condition: Refurbished, without warranty Technical condition: Good Front tyres type: Solid rubber (cushion) Front tyres size: 16-5-11 1/4 Front tyres condition: 80 - 100% Rear tyres type: Solid rubber (cushion) Knedoxn Dnlepfx Aabjc Rear tyres size: 16-5-11 1/4 Rear tyres condition: 80 - 100% Battery voltage: 24V Battery capacity: 250Ah Battery year: 2024 Battery condition: 80 - 100%

Condition: ready for operation (used), Dough dividing: 30 pieces per run Knedpfx Aev Nbxhoabec Weight range: 30-70 g each piece Max. dough input: 2100 g Dough yield at dividing only: max. 75 % Dough yield with rounding: max. 65 %

Condition: excellent (used), Sharpening machine multi-profiles. Automatic stop of work-cycle. Can sharpen a lot of different type of teeth shape. Allowing the independent adjustments of the feed pitch, of the grinding wheel working depth and of the entry/exit speed. It has different cams for different profiles. Its vertical design was studied to require little space and bear high workloads. Solid and reliable. Speed of working adjustable by VFD (variable-frequenzcy-drive). Borazon grinding wheel for perfect sharpening operations. Cooling system. Knsdpfx Aasw Hupmsbjc

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 466 h, load capacity: 200 kg, empty load weight: 2,735 kg, construction height: 1,990 mm, fuel type: electric, total length: 2,655 mm, drive type: Elektro, construction width: 1,000 mm, working height: 10,000 mm, Vertical Lift Platform Kodpfx Aexnd Uxsabsnc Condition: Ready for operation and fully functional Technical Condition: Very good Front tyre type: Cushion tyres Front tyre size: 406/127-266.7 – non-marking Rear tyre type: Cushion tyres Rear tyre size: 406/127-266.7 – non-marking Battery voltage: 24V Battery capacity: 240Ah Battery year of manufacture: 2025 Description: In addition to this Haulotte model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and side loaders available in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Leasing and financing options are always available on attractive terms. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our proprietor, Mr. Peter Sawitzki, will be happy to provide you with detailed advice regarding this STAR 10-1. P.S.: Our master forklift workshop specialises in repair, maintenance, overhauls, and custom modifications for forklifts from 8 tonnes and above. We also offer consignment sales for your vehicles.

Year of construction: 2004, condition: used, controller manufacturer: SIEMENS, pipe diameter (max.): 90 mm, pipe length (max.): 3,000 mm, wall thickness: 8 mm, CONTROLS .. SIEMENS FEEDSTOCK TUBE .. external diameter min.: 10 mm .. external diameter max.: 90 mm .. wall thickness min.: 0.8 mm .. wall thickness max.: 8 mm .. length min.: 150 mm .. lenght max.: 3000 mm Integrated Tube Cutting Line – Standard Configuration The integrated tube cutting line is a fully automated system for the precise processing of tubes and profiles. It combines cutting, brushing/deburring, washing, drying, measuring, and stacking into one continuous process. All workpieces are 100% inspected within the line for length, inner and outer diameter, and defective parts are automatically sorted out. System Components Bundle loading magazine Tube separation unit Sawing unit Brushing and deburring machine Washing machine with dryer Length measurement control Outer and inner diameter inspection (Keyence sensors, measuring mandrels up to 500 mm) Stacking handling with magnetic gripper Safety devices (protective fence, light barriers, etc.) The bundle loading magazine is designed for tube lengths up to 9 m. The system allows for damage-free separation and positioning of the tubes. After cutting, the tubes are deburred, cleaned, dried, and automatically stacked for further transport. Main Technical Data Specification Value Overall length approx. 13,000 mm Width approx. 3,600 mm Height approx. 2,350 mm Floor load approx. 1,500 kg/m² Operating temperature 15 °C – 40 °C Relative humidity max. 90 % Connection Requirements Electrical: Control system: Siemens 840 D Installed power: approx. 125 kW Fuse protection: 200 A Power supply: 3 × 95 mm² + 1 × 50 mm² PEN (IEC 364-4-41 / VDE 0100 Part 410) Pneumatic: Compressed air: approx. 3.5 m³/min, 6–10 bar (dry and filtered) Water: ¾" water connection for washing machine with dryer Filling volume: 1,400 l Tube Processing Parameters Parameter Value Max. bundle weight 5,000 kg Outer diameter range 10–90 mm Wall thickness 0.8–8 mm Tube shape Round and profile tubes Raw material length 3,000–9,000 mm Cut lengths 150–3,000 mm Material Steel, stainless steel, Docol 800 DpAg, 26MnB5, 34MnB5 Max. saw blade width 3 mm Measuring and Inspection Systems Length measurement: Keyence sensor with SPC evaluation Inner/outer diameter inspection: Measuring mandrels with force detection (1–100 N) Repeatability: ± 0.1 mm Data analysis: PC-based evaluation software including documentation Performance Data Processing speed depends on tube diameter, length, and material Max. part weight per cut: 25 kg Machining accuracy: ± 0.05 mm + saw blade tolerance (max. ± 0.10 mm total) Max. stacking weight: 45 kg Positioning accuracy for stacking: 0.5 mm Corrosion Protection All machine and safety components are finished with a high-quality base coat. Machine color: RAL 5010 (Forster Blue) Safety guards: RAL 1003 (Signal Yellow) Kodpfx Aoxnim Tjabjnc Special Features Fully automated workflow from bundle loading to sorted stacking SPC-controlled measurement and documentation system Carbide-compatible sawing technology High process reliability with integrated inspection and monitoring systems Compact design with excellent machining precision

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Knjdpfexnldbox Aabjc

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 13 h, load capacity: 227 kg, empty load weight: 2,014 kg, construction height: 1,930 mm, fuel type: electric, total length: 2,320 mm, drive type: Elektro, construction width: 840 mm, working height: 9,790 mm, Scissor lift Condition: New machine Technical condition: New Front tires type: Solid rubber Front tires Size: 16x5x12 Front tires Condition: 80 - 100% Knedpfeurz R Ssx Aabsc Rear tires Type: Solid rubber Rear tires Size: 16x5x12 Rear tires Condition: 80 - 100%

Year of construction: 2017, condition: refurbished (used), Features and benefits: • Processes up to 30 pieces/minute • Adjustable peeling depth using ABL patented peeling system • Self-adjusts for different fruit shapes/types • High yield rate: 50% and up on fully peeled fruit • Reliable and robust performance for industrial and non-industrial processes • Maximizes productivity while reducing production costs OP30 is a semiautomatic peeling machine for citrus (orange & grapefruit), kiwi and mango. The machine can be used to peel one fruit variety at the time or even two separate fruit since it is equipped by two peeling head. When processing citrus fruit or kiwi the speed rate is 30 fruit x minute , while the speed it’s reduced to 24 fruit x minute when processing mango. Fruits are positioned manually into the feeding cups by one operator, if processing citrus a coring option is Knsdpfxjpv Uz Ns Aaboc also available. Two self centering hand will center and transfer the fruit between two mandrels , these will put in rotation the fruits to allow their peeling. The ABL patented peeling head will gently perform the peeling following the fruit shape according it’s dimension with the possibility to adjust the peeling depth also with the machine in function. Once peeled two blades will remove the two extremity (not for mango) and then release the fruit onto the peeled fruit conveyor. serial number: 201, year of construction: 2017, weight 1550 kg, 415 V, 50 Hz, 4.0 kW, total dimensions: 2650 mm x 1700 mm x 2100 mm. We have three machines. All are refurbished with new PLC and electronics.

Condition: good (used), ML-800 NXL Die-Cutting Machine This machine is used to cut shapes from a mold (die) from materials such as paper, cardboard, leather, plastics, etc. The machine is in perfect condition, manufactured in 2018. First installed in 2020. This is the heaviest die-cutting machine in this format, precise. Kodpfxjxgbgps Aabsnc Format: 830 x 560 mm Weight: 2500 kg Power supply: 380 V Motor: 2.5 kW Equipment: – Electromagnetic clutch and brake – Quick-mount frame – 3 operating modes: continuous, time-delayed, and manual – Centralized pressure lubrication – Additional safety guards – Operating tools and instructions with CE documentation.

Condition: excellent (used), Year of construction: 2021, operating hours: 150 h, functionality: fully functional, machine/vehicle number: 47/11/21, type of input current: three-phase, The VPF series vacuum press is designed for laminating with PVC foil as well as veneering with natural wood veneer. It is suitable for both small and large manufacturing facilities. The VPF Vacuum Press is fully automated and features three operating modes: - Automatic Mode: After pre-setting the working parameters on the PLC controller, the press automatically performs all actions (heating, pressing, cooling). - Manual Mode: The operator manually carries out all operations. - Membrane Mode: Intended for use with a membrane for veneering and laminated bending (also available in automatic mode). Knedpfx Aaexpqt Djboc Working area: 1400x3000 mm Max temperature: 140°C Power: 30 kW Power supply: 3P 400V 50Hz Dimensions: 3500x1700x2200 mm Weight: 1150 kg APPLICATIONS: - Laminating flat components with PVC foil (kitchen fronts, window sills) - Veneering straight and shaped elements with natural wood veneer (doors, frames, chairs, tables, furniture, coffins) - Laminating components with HPL laminates in 2D format (kitchen countertops, window sills) - Pressing of structured surfaces (stone veneer, decorative mats) CONSTRUCTION: - Robust welded frame, powder-coated - Infrared heating system with carbon heaters - Three heating zones with adjustable temperature - Pneumatic cylinders for lifting the heating dome - All-round access to the working table - Integrated PLC controller for automated operation - Equipped with an electronic vacuum control system - Working table surface made from HPL board - Built-in oil-lubricated vacuum pump (100 m³) – 0.9-0.95 bar (9000-9500 kg/m²) - Integrated 100-litre buffer tank - Upper heating dome made of aluminum

Condition: used, Year of construction: 2013, lifting height: 5,800 mm, fuel type: electric, color: red, Drivetrain Drive: Wheel Weights Empty weight: 230 kg Functional Lifting capacity: 230 kg Working height: 780 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Transport dimensions (LxWxH): 1,86x0,76x2,17 Production country: DE Additional information Please contact Christian Theißen for more information Manufacturer PB Lift Type S78-7EC Built in 2013 Usage data Max. Working height 7,80 m Max. platform height 5,80 m can be moved up to a working height of 7,80 m Engine Battery platform dimensions LxW 1,69 x 0,76 m platform dimension extended 2,59 m Kodpfxjv Tkdbj Aabonc Hublast 230 kg Max. Lifting capacity on extension 113 kg Overall dimensions LxW 1,86 x 0,76 m Transport height with railing 2,17 m Transport height without railing 1,37 m ground clearance 0,09 m indoor use only no Weight 1.240 kg Specifics White tires Attachment Points for restraint systems (PSA) available

Condition: good (used), Formit PRO X The FORMIT ProX is designed from aluminium (anodized) and stainless steel. The profiler is suitable for smaller installations with a ready product production capacity of up to 150 kg/ hour. Knedpet Sxt Djfx Aaboc The ProX profilers are suitable for producing balls sized between 17 and 33 mm. The feeding of the raw material into the ProX is important for successful production results. It is recommended to place a good speed controlled conveyor in front of the profiler. Raw materials, such as potatoes and carrots (cut), can be successfully used. Cube shaped raw material can also be used. It is recommended to pre-peel all the raw material before use. Pre-peeled raw material improves the quality of the final product, increases the capacity and extends the user-life of the cutting edges on the shaping rolls. After the shaping process, it is recommended that the products are washed. For removal of the secondary product, we recommend the installation of a pump or some other transportation system underneath the machine. When producing balls from a pre-peeled product of a good size, the quantity of the secondary product may be almost the same as the primary product produced.

Condition: used, Year of construction: 2012, lifting height: 12,100 mm, fuel type: electric, Drivetrain Drive: Wheel Weights Empty weight: 1.810 kg Functional Lifting capacity: 360 kg Working height: 810 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Transport dimensions (LxWxH): 2,3x0,8x1,71 Production country: JP Additional information Please contact Christian Theißen for more information Manufacturer: Aichi Model: SV06CNL Year of build: 2012 Knedpfxsv Tibro Aaboc Condition: Used Data: Max. working height: 8,10 m Max. platform height: 6,10 m Drive type: Battery Platform dimensions LxW: 2,21 x 0,71 m Length of the platform extension: 1,00 m Lifting capacity: 360 kg Lifting capacity on extension: 120 kg Total dimensions LxW: 2,30 x 0,80 m Height transport position with railing: 2,125 m Height transport position without railing: 1,715 m Max. Wheel load: 800 kg Max. climbing capacity: 25% Max. permissible longitudinal tilt angle: 3° Max. permissible cross slope angle: 1,5° Own weight: 1.810 kg Special features: white tires, attachment points for restraint systems (PSA) available, only for indoor use Information: Suitable transport trailer upon request for an additional charge of €2,999 Location: 41468 Neuss immediately available

Condition: good (used), Year of construction: 2013, lifting height: 5,700 mm, fuel type: electric, Weights Empty weight: 1.420 kg Functional Lifting capacity: 230 kg Working height: 770 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Transport dimensions (LxWxH): 1,89x0,76 Production country: FR Additional information Please contact Christian Theißen for more information Manufacturer: Haulotte Model: Optimum 8 Year of build: 2013 Condition: Used Data: Max. working height: 7,70 m Platform height: 5,70 m Lifting capacity: max. 230 kg Lifting capacity on extension: 113 kg Platform dimensions LxW: 1,68 x 0,71 m Platform lenght pushed out: 2,59 m Total dimensions LxW: 1,89 x 0,76 m Height transport position with railing: 2,00 m Height transport position without railing: 1,14 m Movable up to working height: 7,70 m Ground clearance: 0,06 m Drive type: Batterie Only indoor using: ja Own weight: 1.420 kg Special features: weiße Reifen, Anschlagpunkte für Rückhaltsysteme (PSA) vorhanden. Kjdoxn R Edopfx Aabonc Location: 41468 Neuss immediately available

Condition: used, Year of construction: 2011, lifting height: 2,010 mm, fuel type: electric, color: red, Weights Empty weight: 1.514 kg Functional Lifting capacity: 227 kg Working height: 770 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Transport dimensions (LxWxH): 1,9x0,76x1,15 Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: Genie Model: GS1932 Year of build: 2011 Knedpfx Aev Tifqsabsc Condition: Used Data: Max. working height: 7,70 m Platform height: 5,70 m Lifting capacity: 227 kg Lifting capacity on extension: 115 kg Platform dimensions LxW: 1,64 x 0,75 m Platform lenght pushed out: 2,59 m Total dimensions LxW: 1,90 x 0,76 m Transport height with / without railing: 2,01/1,15 m Movable up to working height: 7,70 m Ground clearance: 0,07 m Drive type: Battery Own weight: 1.514 kg Special features: white tires, attachment points for restraint systems (PSA) available. Location: 41468 Neuss immediately available

Condition: used, Year of construction: 2012, lifting height: 7,870 mm, fuel type: electric, Weights Empty weight: 1.890 kg Functional Lifting capacity: 227 kg Working height: 987 cm CE mark: yes Condition General condition: average Knjdpfewd Nppjx Aabec Technical condition: average Visual appearance: average Other information Delivery terms: EXW Transport dimensions (LxWxH): 2,34x0,84x2,25 Production country: CA Additional information Please contact Christian Theißen for more information Manufacturer: Skyjack Model: SJIII3226 Year of build: 2012 Condition: Used Data: Max. working height: 9,87 m Platform height: 7,87 m Lifting capacity: 227 kg Lifting capacity on extension: 113 kg Platform dimensions LxW: 2,14 x 0,71 m Platform lenght pushed out: 2,98 m Total dimensions LxW: 2,34 x 0,84 m Height transport position with railing: 2,25 m Height transport position without railing: 1,90 m Movable up to working height: 9,87 m Ground clearance: 0,07 m Drive type: Battery Only indoor using: yes Own weight: 1.890 kg Special features: white tires, anchorage points for restraint systems (PSA) available. Location: 41468 Neuss immediately available

Condition: used, Year of construction: 2012, lifting height: 2,070 mm, fuel type: electric, Drivetrain Drive: Wheel Weights Empty weight: 1.922 kg Functional Lifting capacity: 590 kg Working height: 830 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Transport dimensions (LxWxH): 2,35x1,18x2,07 Production country: CA Additional information Please contact Christian Theißen for more information Manufacturer: Skyjack Model: SJIII4620 Year of build: 2012 Knjdpfjv Tknyex Aabjc Condition: Used Data: Max. working height: 8,30 m Platform height: 6,30 m Lifting capacity: 590 kg Lifting capacity on extension: 590 kg Platform dimensions LxW: 2,15 x 1,12 m Platform lenght pushed out: 3,35 m Total dimensions LxW: 2,35 x 1,18 m Height transport position with railing: 2,07 m Height transport position without railing: 1,72 m Movable up to working height: 8,30 m Ground clearance: 0,08 m Drive type: Battery Only indoor using: no Own weight: 1.922 kg Special features: white tires, anchorage points for restraint systems (PSA) available. Location: 41468 Neuss immediately available