Used Scm Si 400 for sale (648)

Condition: ready for operation (used), Year of construction: 2017, overall weight: 2,880 kg, This SCM SIGMA PRIMA 67 panel saw was manufactured in 2017. Ideal for precise wood panel cutting, it offers reliable performance for your woodworking projects. Consider the opportunity to buy this SCM SIGMA PRIMA 67 panel saw. Contact us for more information. Machine Benefits Technical Machine Benefits • The panel saw is mainly intended for cutting boards sized 2800 x 2070 mm and these are the formats that were typically processed. The working range of the panel saw is 3800 mm on one of the axes. Extra Information Media Electrical specifications: Voltage: 400 V Phases: 3 Nominal current: 22 A Frequency: 50 Hz Lsdpfx Apjzug Insdjag

Condition: excellent (used), Year of construction: 2001, I sell the format sliding table saw with scoring SCM SI 300N, year 2001. Lsdpfoiu Awbjx Apdeag Sliding table length 3200mm. Max. cutting width on cross fence 1950 / 2850mm. Max. cutting width on parallel fence 1270mm. Motor 5,5 kW. Max. saw blade diameter fi.300x30mm Max. scoring saw blade diameter fi.120x20mm Main blade (scoring blade) 4000 (8000) rpm. Condition very good. Avialable immediately. Please contact for more photos and details.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: AE00003735, overall weight: 4,300 kg, input frequency: 50 Hz, input current: 126 A, input voltage: 400 V, warranty duration: 12 months, Basic information Manufacturer: SCM Group / DMC Model: DMC Eurosystem M4 1350 Year of manufacture: 2023. Condition: unused, new Operating hours: 0 h Working width: 1.350 mm Working thickness: 3-200 mm Feed speed: 2-16 m/min Power supply: 400 V, three-phase, 50 Hz Rated current: 126 A Weight: approximately 4,300 kg Serial number: AE00003735 Location: Tenja, Croatia Availability: immediately Description; For sale is an unused SCM DMC Eurosystem M4 1350 automatic wide-belt sanding and calibrating machine, manufactured in 2023. The machine has never been used in production and has 0 operating hours. It is installed at our production facility and is available for inspection by prior appointment.   Working unit configuration 1st working position - sanding roller • R 320-2620 sanding unit • Roller diameter: 320 mm • R45 rubber-coated roller, 45 Shore hardness • 15 kW motor with frequency inverter • Oscillating abrasive-belt blowing and cleaning system 2nd working position - brush unit • BF 300 brush unit • SI 300-E helicoidal brush roller • 3 kW motor with frequency inverter • Abrasive inserts, grit 180 and 240 Lodpfxjzyghlo Apdsag • Automatic electronic brush position setting • Side oscillation and reversible brush-roller rotation 3rd working position - brush unit • BF 300 brush unit • SI 300-E helicoidal brush roller • 3 kW motor with frequency inverter • Abrasive inserts, grit 180 and 240 • Automatic electronic brush position setting • Side oscillation and reversible brush-roller rotation 4th working position - superfinishing sanding pad • S-2620 unit with superfinishing sanding pad • PE 32/L EPICS electronic sectional sanding pad • Segment pitch: 32 mm • 11 kW motor with frequency inverter • Electronic working-pressure control • Oscillating abrasive-belt blowing and cleaning system   Outfeed finishing unit • SB/U oscillating finishing unit • SB 200 UFC Ultra Fine brush roller • Silicon-carbide fibres • Rotating blowers for final workpiece cleaning Additional equipment • Fixed working height of 900 mm • BL 32 electronic infeed panel-reading bar • EPICS electronic sectional-pad system • Vacuum conveyor system with motor up to 7.5 kW • Perforated vacuum conveyor belt • Rubber-coated conveyor belt, 50 Shore hardness • 2.2 kW conveyor-belt drive motor • Front and rear roller support tables • Eye-M industrial PC • 21.5-inch Full HD touchscreen • Maestro Pro-Sand control software • Remote service capability • Operator interface in English and Croatian • CE-compliant version Inspection and terms of sale; The machine is available immediately and can be inspected by appointment at our production facility in Antunovac, Croatia. The machine is offered ex location. Dismantling, loading, transport and installation at the buyer's site will be agreed separately. All technical information is based on the original SCM quotation and the machine identification plate. The buyer may verify the specifications and condition during inspection. Additional photographs, videos, the original technical specification and the relevant SCM documentation are available to serious prospective buyers. Price; EUR 125,000 net, plus VAT - negotiable

Condition: excellent (used), functionality: fully functional, cutting height (max.): 130 mm, total length: 2,000 mm, total height: 130 mm, cutting width (max.): 230 mm, total width: 230 mm, overall weight: 3,000 kg, SCM Superset 23 – Four-Sided Planer – 5 Heads – 230 × 130 mm – FOUR-SIDED PLANING MACHINE! Professional SCM Superset 23 four-sided planer, renowned Italian manufacture. The machine is equipped with 5 spindles, stepless feed rate adjustment via a frequency inverter, and electric thickness setting. A robust feed system and pneumatic roller pressure ensure stable and precise guidance of the workpiece. The planer is used and in very good technical condition. The machine is suitable for professional wood processing in carpentry workshops, sawmills, and for the production of structural elements, moldings, boards, and timbers. KEY PARAMETERS: - maximum workpiece width: 230 mm - maximum workpiece height: 130 mm - number of spindles: 5 - spindle diameter: 40 mm Lsdpfxszzx Iyj Apdoag - stepless feed rate adjustment via a frequency inverter - electric thickness setting - pneumatic roller pressure - central table lubrication - long infeed table: 1980 mm - machine enclosed in a cabinet SPINDLE ARRANGEMENT: Bottom horizontal spindle - working width: 230 mm - motor power: 4 kW Right vertical spindle - working height: 130 mm Left vertical spindle - working height: 130 mm - total power of the 2nd and 3rd spindles: 7.5 kW Top horizontal spindle - working width: 230 mm - motor power: 5.5 kW - electric up/down adjustment Bottom horizontal spindle - working width: 230 mm - motor power: approximately 5.5 kW All spindles have adjustment in the appropriate directions: up/down and left/right. FEED SYSTEM: - 6 top metal, toothed feed rollers - double top discharge roller – smooth, rubber - 2 bottom rubber pull rollers - 2 bottom side pressure rollers - pneumatic roller pressure - stepless feed rate adjustment via a frequency inverter - feed motor: 3 kW OTHER TECHNICAL DATA: - body lifting motor: 0.37 kW - length of the infeed table: 1980 mm - central table lubrication - dust extraction port diameters: 5 × 130 mm - machine dimensions: 3600 × 1800 × 1750 mm - weight: approximately 3000 kg - country of manufacture: Italy - condition: used, very good Gross price, VAT margin. The machine is available from JBS Maszyny Stolarskie. We invite you to contact us by phone. You can view and inspect the machine before purchasing. We also assist with organizing transportation. JBS WOODWORKING MACHINERY Sale of professional woodworking machines

Condition: excellent (used), functionality: fully functional, chain width 300mm Ljdpfx Aszxpw Topdjag cutting height 120mm max blades diameter 350mm variable regulated feeder manual regulation of pressure rolls manual regulation of shafts connection 380V

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Ledpfjvvi N Ijx Apdeag

Condition: good (used), Year of construction: 2019, functionality: fully functional, New price including transport and installation approx. €850,000 net. The machine was professionally disassembled by qualified technicians and subsequently stored. An inspection at the location in the Netherlands is possible after prior appointment. Technical data: Manufacturer: SCM Stefani Type: One 108 Cell Year of construction: 2019 Operating hours: approx. 5,600 Feed speed: 10–40 m/min Maximum speed with pickback: 30 m/min Workpiece length: approx. 250–3,000 mm Workpiece width: approx. 130–1,200 mm Workpiece thickness: 10–60 mm Maximum workpiece weight pickback: 80 kg Machine length edge banding machine: approx. 11,550 mm Installation area of the complete cell according to layout: approx. 30,270 × 13,166 mm Working height: approx. 970 mm Connection: 400 V / 50 Hz with neutral conductor Workpiece feed: Motorized feed roller table Easy Order BN+ automatic workpiece feed Automatic alignment for longitudinal and transverse processing Servo-controlled workpiece centering Automatic adjustment to different workpiece dimensions Large lateral workpiece support Edge and glue system: Nordson AltaPUR 4HO PUR hot melt unit Melt-on-demand technology Melting capacity up to approx. 6 kg/h SGP glue reservoir with CNC-controlled glue metering Additional interchangeable SGP glue reservoir Separate preheating trolley for one glue reservoir Workpiece edge preheating Automatic positioning of the edge guide and pressure rollers 12-position vertical edge magazine with automatic edge changing Processing of roll material up to 3 mm Designed for thin edge, 20° bevel, and radii R1, R1.5 and R2 Machining units: Pre-milling unit RT-H/RT-X with 2 × 4 kW Electronic positioning of the pre-milling unit Trimming unit YU/SP-1000 with automatic saw blade inclination Flush-cutting and pre-milling unit R-E CNC-controlled RSU-E Hi-Drive Multiedge fine milling unit Processing of thin edge and R1, R1.5 and R2 Round 4 four-motor corner rounding unit Automatic selection of four profiles MX80 HSK milling unit with 10 kW CNC-controlled horizontal and vertical positioning Laodpfx Aoz Aquhjpdsg Automatic pivoting from 0–90° Suitable for continuous or recessed grooves on the top, bottom and workpiece edge CNC-controlled RCS-E Multiedge radius drawing blade unit Edge sanding unit GT with oscillating sanding belt Two glue seam drawing blade units RCA/2C Polishing unit SP/F with oscillating Riepe polishing pads Spraying devices: Release agent spraying device at the machine infeed Antistatic and coolant spraying device Spraying device for sensitive or foiled edges Cleaning agent spraying devices for the glue seam drawing blades Spraying device for the first pressure roller Automatic pickback return: Gantry return system with three servo-controlled axes Workpiece pick-up via vacuum gripper Automatic rotation by 0°, 90°, -90° and 180° Automatic return to the machine infeed Up to 10 return cycles per minute without rotation Up to 9 return cycles per minute with 90° rotation Motorized conveyor belts Additional second unloading station Central control via the machine control system Location: Netherlands Inspection: possible after prior appointment Condition: professionally disassembled and stored Availability: short notice Price: on request The technical data were compiled based on the available original documents. Errors, changes and prior sale are reserved.

Condition: used, Year of construction: 2015, Numeric Control Startouch Control System Panel height mm. 60 Edges in PVC/Abs rolls mm. 3 Laedpfstxtzkox Apdjg Solid wood in strips mm. 6 Feed speed up to 11 m/min Working height adjustable electronically by C.N. Panel support guide with adjustment Side roller conveyor with idle wheels for panel support Anti-adhesive group Adjustable two-motor rectifier unit Reel holder plate Gluing group for EVA glue Edge pressure unit on straight profiles with adjustable pressure rollers Trimming unit with 2 motors with automatic inclination adjustment Gleaning unit electronically adjustable by C.N. Multifunction rounding unit (edner + rounder) adjustable by C.N. Edge scraper unit Glue scraper unit Oscillating brush group

Condition: used, Year of construction: 2006, functionality: fully functional, Machine identification Model: SCM Sigma Plus 125 P 45 Type: heavy-duty panel saw with lifting platform Manufacturer: SCM Group S.p.A., Italy Lodpey Iwy Dofx Apdoag Serial number: AE/028708 Year of manufacture: 2006 (used machine) Condition: used industrial panel saw Main equipment / configuration Fixed, phenolic-coated front air cushion table with stop Three movable, phenolic-coated air cushion tables Pneumatic automatic alignment device Quick saw blade change system Independent main saw blade lifting THK precision linear guides Four additional clamps in the right-angle alignment zone Optimized saw blade extension PC operator interface in English

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: AE/034421, functionality: fully functional, cutting height (max.): 67 mm, cutting width (max.): 2,200 mm, saw blade diameter: 320 mm, cutting length (max.): 4,150 mm, spindle speed (max.): 5,000 rpm, TECHNICAL DETAILS Cutting length max.: 4,150 mm Cutting width max.: 2,200 mm Cutting height max.: 67 mm Saw blade diameter max.: 320 mm Saw blade bore diameter: 80 mm Spindle speed min.: 1,000 rpm Spindle speed max.: 5,000 rpm MACHINE DETAILS Voltage: 400 V Current consumption: 21 A Fuse: 32 A Lajdpozulxfefx Apdjg Power: 8.4 kW Power, main motor: 9.0 kW Total weight: 4,000 kg Shipping packages: 4 pcs. EQUIPMENT Software Wincut 12.2.9 Documentation CE marking The following data is taken from the machine's data sheet (see last image): TECHNICAL DETAILS Sawing unit Diameter of scoring saw blade: min. 160 mm / max. 280 mm Speed of scoring saw blade: min. 1,600 rpm / max. 7,000 rpm Cutting length: min. 1,600 mm / max. 4,500 mm Feed rate of saw blade: min. 0 m/min / max. 100 m/min Drive power Power, main saw motor: min. 5.5 kW / max. 8 kW Power, scoring saw motor: min. 0.75 kW / max. 2.2 kW Power, saw blade feed motor: min. 0.75 kW / max. 0.75 kW Power, feed/return motor of the carriage: min. 0.55 kW / max. 0.75 kW Carriage Carriage travel: max. 4,600 mm Feed rate of carriage: max. 25 m/min Return speed of carriage: max. 70 m/min

Condition: used, Year of construction: 2000, Used machine Ljdpfx Aezlbr Ajpdoag Year of manufacture 2000 special SCM guide system of the saw carriage. The arc-shaped arrangement between balls and running guides as well as the hardened contact surfaces ensure exceptional and constant precision the scorer can be swivelled in and out from outside without any problem; a special plate enables precise positioning the fence is extremely robust and can be used for both rip cuts and angle cuts; fast return to the initial position. The precise flip stops enable a direct reading of the dimensions over the entire length Table dimensions 830 x 1200 mm Saw carriage 1500 x 290 mm Cutting length 1500 mm Tilt of the saw blade 45° max. diameter main saw blade 300 mm max. diameter scoring saw blade 100 mm max. cutting height 90° = 95 mm max. cutting height 45° = 67 mm Saw blade speed 4000 rpm Scoring saw speed 8000 rpm Cutting width with parallel guide 1000 mm Diameter extraction port 100 mm Motor 4 kW Weight: 425 kg Availability: at short notice Storage location: Röllbach

Year of construction: 2025, condition: new, Exhibition machine Laedpfx Apex Enrxodog Year of manufacture: 2025 Equipment and technical data: L'invincibile SI X - DOUBLE MITER CIRCULAR SAWING MACHINE 931201 Frequency: 50 Hz 570348 Scoring unit with independent motor 570351 LED lighting of the scoring area 530130 "Full Support & Wireless" 570353 Extension with roller conveyor on the parallel fence side 080999 Ex works R01264 L'invincibile SI X, CE version 083202 Base 109993 MACHINE LANGUAGE: German 930731 Voltage: 400 EU 080685 Additional packaging 109999 Standard safety regulations Article number: SI X Variant: R021401 Availability: Short-term, upon agreement Location: Flörsheim

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Cutting length: 4300 mm Cutting depth: 4300 mm 7.5 kW main blade unit Scoring blade unit 1 fixed front table with air cushion 3 mobile front tables with air cushion Pushing carriage with approx. 7 clamps WinCut software Foot pedal for cycle start and stop Safety guards Weight approx. 3277 kg. Available starting September 2026. Ledpfoznz Uisx Apdjag

Condition: excellent (used), Year of construction: 2005, 3-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data input via membrane keypad Electronic scoring unit adjustment Automatic parallel fence with adjustment via leadscrew and linear ball bearing guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis with corresponding fine adjustment. Angle detection system using magnetic strip and LCD display. Crosscut stop with 3 LCD displays Extendable support table with roller support Technical Data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Scoring blade diameter mm: 120 Panel cutting size with extendable stop mm: 3200x3200 Swivel range degrees: 0° / +46° Max. cutting height at 90° mm: 150 Max. cutting height at +45° mm: 130 Saw blade rotation speed rpm: 2500, 3500, 5000 Scoring blade speed rpm: 9000 Extraction port diameter mm: 120 & 100 Main motor power Hz 50 kW: 7.5 Scoring unit power Hz 50 kW: 0.75 Cutting width with parallel fence mm: 1270 Weight approx.: 1180 kg Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-location, loaded free of charge! Lasdpjyftzkjfx Apdog • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty or guarantee. The buyer is welcome to inspect the machines at our premises. • Special agreements are only valid in written form. (We only respond to inquiries including your address & telephone number!)

Condition: excellent (used), Year of construction: 1999, machine/vehicle number: AB/118718, functionality: fully functional, SMC SCIE spindle shaper SI12TW Table length: 1,500 mm Spindle adjustment: up/down Blade adjustment: up/down Blade angle adjustment: up to 45° Cutting width on the right side: 1,450 mm Maximum blade diameter: 300 mm Milling spindle diameter: 35 mm Lajdpfx Aozc Dxzepdog Spindle speed: 3,000/4,500/6,000/8,000/10,000 rpm Saw speed: 4,000 rpm Motor power: 4 kW Available in the Ardennes region.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Maximum panel thickness: 60 mm Edging unit Gluing unit with glue tank Trimming unit Rounding unit Lsdpfx Asyziutjpdeag Edge scraping and gluing unit Brush unit "StarTouch" control system replacing Orion 110 Only 30,217 meters of edge material processed (statistics from 12.03.2026) 4,482 hours

Condition: used, Year of construction: 2005, Working width: 180 mm Working height: 110 mm Number of working spindles: 4 Spindle arrangement: bottom, right, left, top Motor power (bottom & top spindle): 7.5 kW Motor power (right & left spindle): 7.5 kW Adjustment (bottom spindle): - Adjustment (right spindle): - Adjustment (left spindle): handwheel Adjustment (top spindle): handwheel Planer heads (bottom & top): Centrolock Lodpfoyq R Aiox Apdoag Planer heads (left & right): Centrolock combined with profiling capability Feed speed: 2 Feed roller pressure: spring Current consumption: 32.8 A Extraction connection: Machine length: Machine width: Weight:

Condition: used, Year of construction: 2013, power: 9.5 kW (12.92 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,250 mm, number of axes: 3, actuation type: electric, total height: 2,244 mm, total length: 5,240 mm, total width: 2,500 mm, overall weight: 2,700 kg, Equipment: CE marking, We offer this used SCM TECH Z1 machining centre, year of manufacture 2013. Type designation: FORA-FRESATRICE CN Manufacturer: SCM Serial number: AA1/017424 Type: TECH Z1 Model: TECH Z1 Year of manufacture: 2013 Weight: 2,700 kg Rated voltage: 400 V Rated current: 31 A Ljdpfoyvpp Hsx Apdsag Frequency: 50 Hz Short-circuit current: 10 kA If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, cutting height (max.): 90 mm, cutting width (max.): 3,800 mm, saw blade diameter: 380 mm, overall weight: 4,400 kg, cutting length (max.): 3,800 mm, main saw diameter: 380 mm, Beamsaw SIGMA IMPACT 90 (SCM Group) suitable for furniture panels precize cutting by one or more panels overlapped. Manufacturer: SCM Group Model: Sigma Impact 90 Production year: 2017 Cutting width: 3.800 mm Cutting depth: 3.200 mm Max. cutting height: 90 mm Front tables (air cushion): 1x 2.500x600mm, 3x 2.500x600mm Machine basement with air-cushion. Max. main blade diameter: 380 mm Scorer diameter: max. 300 mm PUSHER: brushless motor, max. speed 120 m/min ! SAW CARRIAGE: brushless motor, max. speed 150 m/min ! THK linear guides for the saw carriage movement. THK linear guides for the PUSHER movement. Automatic centralized lubrication of THK linear guides. Hi-Tronic kit: - main motor 15 kW (mode S6) - vertical movement of main and scoring blade by price ball-screws - optimized stroke of the main blade - electronic scorer adjustment in 2 axis (vertical, horizontal) - grooving with the main blade (electronic depth adjustment) - postforming cuts - window cut outs (blind cuts) - AKE flange for main and scoring blade Quantity of clamps (grippers): 10 pcs (maximum) Automatic exclusion of the clamp acting on the panels edge (up to 800 mm width). Start/stop pedal. Label printer. Control SW: WINCUT Optimalisation program: OTTIMO PERFECT CUT TOP (1x HW key) Control PC Eye-S: Windows + LCD touch screen 21" Air conditioning device for the electric box. Panel´s dimension automatic measuring. Laser line for the visualisation of the cutting line. Automatic double side aligner - motorized (60-2.200 mm). Lsdpfx Aox Nc Ayjpdjag Machine stat: fully working Possibility to see in actuall production. Availability: cca April 2026

Condition: used, heavy-duty precision panel saw SCM SI 550 E Class Version: Carpentry - Joinery Cutting length 3200 mm Cutting width approx. 1500 mm Main motor 11 kW 3 speeds: 2500/3000/4200 rpm Mitre fence with length compensation Ljdpfxozi Sctj Apdsag Saw blade up to Ø 550 mm Electric height adjustment and tilting of saw blade with digital displays Machine from retirement / first delivered in 2011 Machine is WORKSHOP TESTED and in EXCELLENT CONDITION Available from stock Lieboch

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Morbidelli X 400 cnc machine with flat (nesting) table Ljdpfx Apexqzm Dsdsag

Condition: used, Year of construction: 2004, 3200mm carriage Lsdpfozqg Rusx Apdsag Electric tilting blade electric cutter Digital display Blade diameter 350mm 380V

Condition: used, functionality: fully functional, SCM SI16 SW panel saw Carriage length: 1500mm Cutting width from the right side: 1000mm Maximum cutting height: 100mm Scoring saw Main saw diameter: 250-350mm Scoring saw diameter: 120mm Laodpfx Apezg H N Njdog Saw blade adjustable from 0-45° Saw blade adjustable up/down 3 saw blade speeds: 3200/4500/5500 rpm Scoring saw speed: 9800 rpm Main motor power: 5.5kW Scoring saw motor power: 0.75kW Dust extraction port diameter: 120mm

Condition: used, Year of construction: 2015, Colour: White Weight: 4.000 kg - Year: 2015 - Documentation available: Yes - └ Type Documentation: Technical data, Assembly manual, User manual, Operating system - CE marking present: Yes - CE certificate present: No - Serial number: AE/034421 - Main motor power [kW]: 9.0 - Software: Wincut 12.2.9 - Saw blade bore diameter [mm]: 80 - Max. saw blade diameter [mm]: 320 - Max. cutting length [mm]: 4150 - Max. cutting width [mm]: 2200 - Max. cutting height [mm]: 67 - Spindle speed: - └ Min. spindle speed [rpm]: 1000 - └ Max. spindle speed [rpm]: 5000 - └ Spindle speed control: Variable - Voltage [V]: 400 - Current consumption [A]: 21 - Fuse [A]: 32 - Power [kW]: 8.4 Laedpfx Aezzb I Njpdjg - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2013, .30 Base machine ACCORD 30 FX N. 1 CONCEPTCNC machining center with a moving gantry and a fixed worktable for processing various sheet-like materials: chipboard, MDF, laminated solid wood, plastic materials, and light alloys. STRUCTUREThe machine is developed using the best three-dimensional CAD systems for solid modeling. The machine bed and moving crossbeam represent the two main elements of the machine structure and are manufactured in the company's own foundry. All mechanical machining operations are carried out on special production equipment in a single setup to ensure optimal precision and to minimize tolerances during machining. The control cabinet is mounted directly on the machine bed, allowing for a very compact design and easy access. CONTROL UNITThe control unit consists of an industrial NC control system with an integrated office PC (desktop computer). The CNC solution with an office PC combines all the features of numerical control with the typical user-friendliness of an office PC, which greatly simplifies the control of the machine by enabling the use of the XILOG MAESTRO user interface, i.e., the software developed by SCM for simple and fast programming, even for non-experts. GENERAL FEATURESPassage height: - 250 mm with H50 accessories- 190 mm with H110 accessoriesPendulum machiningAutomatic lubrication of the axesAir conditioning system to maintain the correct internal temperature in the control cabinet. Software for remote customer serviceOperator interface Xilog MAESTRO with integrated CAD/CAM, which allows for the extremely simple execution of products even with special shapes.A number of advanced functions allow for: - programming via macros- creating and managing subprograms- optimizing machining- managing all machine functions- creating and managing a database of tools93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz R0.00.03 LINGUA P.C. GERMAN 02.12.57 ACCORD 30 FX - Worktable X-Y = 3680x1380 56.05.25 No. 6 Support rail MATIC - L1300 The worktable is equipped with: - no. 2 lateral fixed supports- no. 6 aluminum supports, motor-driven and movable along the X-axis- motorized conveyor belt for unloading chipsEach movable support has: - no. 3 motor-driven support rails for clamping cylinders and vacuum suction cups- air blower for cleaning on each movable support- pneumatic locking/release for quick replacement of the clamping cylinders and vacuum suction cups- preparation for lifting devices- preparation for reference stopsThe workpiece vacuum clamping system is divided into 2 independent worktables.23.02.19 DUO Prisma K working unitThe working unit with 5 interpolating axes is located on the moving crossbeam, which provides maximum stability during milling and thus also ensures optimal machining quality of the workpieces, even with high material removal rates. It allows for rotation around the axes arranged at 50° to each other and has many advantages over traditional 5-axis working units, such as: - the full use of the work areas both with 5 axes and with a vertical spindle- spindle external dimensions outside the working area- a particularly light design for horizontal machiningThe unit has a central chip extraction system. Lajdpfx Aezl Ap Nspdog