Used Scm Si 450 E for sale (571)

Condition: new, Year of construction: 2026, Holzkraft Minimax ST 5es - Maximum equipment for professionals Saw-milling combination with miter cutting device and swiveling milling spindle Art. No.: 5501086 Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved when the scoring saw blade is installed Scoring unit with separate motor and Ø 120 mm saw blade, easily and precisely adjustable from the outside Saw unit can be tilted from 90° to -45 High-precision format sliding carriage made of anodized aluminum Large extension arm (1200 x 650 mm) With material roller and extendable aluminum telescopic fence up to 3300 mm Pivoting milling spindle from 90° to -45° backwards into the milling fence Four milling speeds With right-left rotation of the milling spindle Three independent motors With lockable main switch, motor protection switch With separate saw-parallel fence and separate jointing fence for dressing as standard Equipment details: Sliding carriage with ball contact system Made of anodized aluminum Guides made of hardened and ground steel, 15% harder than conventional steel Double cradle milling unit Swiveling, made of cast iron Fixing points directly on the table, thus optimal running smoothness Milling spindle mounted far up on precision ball bearings, thus low bearing load and longest possible service life Powerful industrial motors Milling stop Heavy-duty professional version The high-quality milling fence made of cast iron is supplied with fine adjustment as standard 3-fold positionable for quick return of the setting With fine adjustment via toothed rack, numerical display and aluminum milling stop jaws Rip fence With fine adjustment and quick clamping Sturdy round bar guide made of ground steel Conveniently folds down for cutting large workpieces Reversible aluminum ruler for narrow workpieces Cast iron double weigh saw unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Close to the saw blade, mounted on both sides Height and up to 45° inclination adjustable Scoring unit with separate scoring motor 0.55 kW as standard Boom with angle-adjustable telescopic crosscut fence with degree raster graduation Dimensions and weights weight approx. 900 kg Connection dust extraction diameter of dust extraction nozzle 3 x 120 mm Suction port diameter saw blade guard 80 mm Drive power scoring motor 0,55 kW main motor 2 x 5,0 kW Electrical data Supply voltage 400 V Format sliding carriage and table Pjdsd Hx Hmjpfx Akfogk Width of sliding table 360 mm height of sliding table 142 mm Table length 1380 mm table width 465 mm Milling spindle spindle inclination 0 - -45 ° useful length of spindle 125 mm spindle speeds 3500/6000/8000/10000 min-¹ Milling tool diameter max. lowerable 240 mm tenon milling 320 mm Circular saw unit and scoring unit trimming length 3200 mm Cutting width with rip fence 900 mm Max. Trimming width to the left of the saw blade 3300 mm saw blade inclination 90 - 45 °. Max. Cutting height 90° 104 mm Max. Cutting height 45° 68 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, 4-knife shaft for best results of Planer Smooth running thanks to precision unit and the heavy casting Front steel feed roller with helical gearing for an optimum feed Satin Steel pull-out roller, optionally with squeegee in the excerpt The working table is mounted on four large pillars that ensure the greatest stability under all operating conditions. The thickness table is adjusted by a Handwheel with numeric display for the planing height (exactly 1/10 mm) Equipped with two speeds, of user facing the front of comfortable selectable Powerful industrial motor Stable steel-cast iron construction Equipment details: Work table Stored on four großdimensonierten screws ensure the stability of the largest under all working conditions Special lifting device correctly maintain the table position, also without lock Tersa Planer knife shaft No adjust and screw more Planer blades change in seconds Self arretierend Particularly low noise Thickness table adjustment at 41 S elite s through a Handwheel with numeric display for the planing height (exactly 1/10 mm) Dimensions and weights Length approx. 900 mm Width/height 1070 mm Weight approx. 361 kg Connect dust extraction Pgodped Hx Hnefx Akfsk Suction nozzle diameter 120 mm thickness Drive performance 5 main motor kW Installation information Space length 1070 mm Space width/depth 900 mm Space height 1100 mm

Condition: as good as new (ex-display), Year of construction: 2025, Minimax ti 55es LL - spindle moulder Figure shows 55 i T s standard version elite The professional craftsman machine with Swivel Milling spindle and 4 speeds. M Digital: motorized height adjustable and Tiltable Stable steel-cast iron construction Large dimensioned milling unit of grey cast iron, swivel up to 45 ° to the rear Display of the cutting speeds by LEDs Quick and easy change of speed of eccentric tension Right left rotation Display height and inclination 1/10 mm exactly Shaper fence heavy-duty professional: with fine adjustment via rack and pinion, with numerical display, ALU stop baking, 3-fold positioned for quick repeat of setting Pododqzh Rspfx Akfegk Scope of delivery: Aluminium milling stop baking Milling wheel arch guard Extension table left and right Model minimax ti 55es LL Item No. 5502252 Technical data Dimensions of the working table 2500 x 655 mm Formatschiebeschlitten commercial length of spindle dimensions 125 mm Max tool diameter 240 mm Max tool diameter lowerable 230 mm Max tool-Ø pin cutter 320 mm Spindle inclination 0-45 degree Speed 3500/6000/8000/10000 min-1 Engine power 400 V / 50 Hz / S6-40% 5.0 kW Suction nozzle diameter 2 x 120 mm

Condition: new, Year of construction: 2025, 4-knife shaft for best results of Planer Pedpfxsd Hx Hps Akfogk Smooth running thanks to precision unit and the heavy casting Front steel feed roller with helical gearing for an optimum feed Satin Steel pull-out roller, optionally with squeegee in the excerpt The working table is mounted on four large pillars that ensure the greatest stability under all operating conditions. The thickness table is adjusted by a Handwheel with numeric display for the planing height (exactly 1/10 mm) Equipped with two speeds, of user facing the front of comfortable selectable Powerful industrial motor Stable steel-cast iron construction Equipment details: Work table Stored on four large screws, ensure the stability of the largest under all working conditions Special lifting device correctly maintain the table position, also without lock Tersa Planer knife shaft No adjust and screw more Planer blades change in seconds Self arretierend Motor thickness table height adjustment at 52 S elite s Height adjustment of the Thicknesser table motor with electronic number For greater precision and more ease of use Dimensions and weights Length approx. 1080 mm Width/depth approx. 1440 mm Weight 455 kg Connect dust extraction Suction nozzle diameter 120 mm thickness Drive performance 7 main motor kW Installation information Space length 1440 mm Space potatoes

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 1,800 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 700 mm, workpiece length (max.): 2,900 mm, total height: 3,000 mm, total length: 5,000 mm, total width: 2,500 mm, overall weight: 5,200 kg, table length: 1,800 mm, table width: 1,400 mm, spindle motor power: 7,400 W, number of spindles: 2, spindle nose: 4, spindle speed (max.): 18,000 rpm, table height: 400 mm, Equipment: documentation/manual, CNC machine with two tables and one head, that carries 2 spindles with two spinning tools in each. 4 tools in total. The tables and work independently to maximise speed, or in synchrony and work as one long table (2900mm) There is 6 clamps in total, which can be fitted to your liking. Pgjdpfx Aoxyh Dhokfek The calmps can handle 100x100mm If working on two tables the part on each one can be 1400mm long. Also a removable vacuum table. with powerful vaccum pump. The machine is in working condition and is still operating at our factory. "TCAS" CAM Software comes with machine.

Condition: excellent (used), SCM Machining center Podpfswmxkuox Akfegk

Condition: excellent (used), CNC Woodworking Center. Pgodpfowmxkhex Akfsk

Condition: used, Year of construction: 2008, functionality: fully functional, Sanding width 1100 mm Min. ÷ max. working height 4÷170 mm Sanding belt width 1115/1370 mm Sanding belt length 2150 mm Podpfx Aoxwwgyokfogk 2 feed speeds 4.5-9 m/min Feed motor 0.45/0.8 kW Table adjustment motor power 0.25 kW Motor power (HP) for single or dual-head machines 11 kW (15) 50 Hz Operating pressure 6 bar

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) Electronic Programmer EasyLing Safety and sound-proof enclosure No. 3+3 Vertical columns to support the working units Min. useful working width (mm) 240 Max. useful working width (mm) 3100 Min. useful working tickness (mm) 3 Max. useful working tickness (mm) 150 Pjdpfxowhmdfs Akfjgk Distance between center-axes of the disappearing dogs (mm) 800 Adjustable (min/max) feeding speed (m/min) 4 - 24 Total installed power No. 4 Working groups (for each machine's side): Scoring Unit Jumping Scoring Unit 1 x Kw 3 (RPM 6000) Hogging Unit 1 x Kw 6 (RPM 6000) 0-10° Jumping Milling Unit 1 x Kw 6 (RPM 6000) 0°-90° Milling-Shaping unit 1 x Kw 6 (RPM 6000) 0°-90°

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 8 (12)* Panels thickness (min/max) mm 8 / 60 Numerical Control "StarTouch" + "Touch 7" Feeding speed m/min 12-18 Top pressure system with rubber belt (C.N.) Spraying unit (Anti-sticking liquid) AAR In-feed fence, adjustable by N.C. "EASY SIZE PLUS" Pre-milling Unit (vertical joint trimmers) 2 x Kw Lamps to heat the workpieces side Glueing Unit (P.U.R. Glue + Quick Melt system) "VC/800" - "VC/6" + "AirFusion AF15" Band Pressure zone (N.C. adjustment) Edge coils supporting unit - 1 Snipping (end-cutting) K/SEL Rough Trimming unit RS/K Fine Trimming unit RI / 800 (3 pos.) Multi Function Unit (Profile contour Trimming Unit) “4 EDGE” KIT Spraying Unit (for sliding liquid) Profile edge scraping unit RAS/1000 Glue scraper RCA / 2C Milling grooving unit K-100 (1 x Kw 1,8) 90° Hot Air Heater (to reactivate the color of plastic tape) Pgedpfx Aexlqntjkfek Panels Return System "SAG" Mod. SPINNER 47 / 63

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 14 / 60 Working width (min/max) mm mm 260 (ca.) / 3200 Numerical Control /Software MAESTRO PRO EDGE Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) Band Pressure zone (N.C. adjustment) Edge coils support (No 2 reels) motorized Snipping (end-cutting) unit YU/SP-750 (30 m/min) Rough Trimming unit RSP Pedpowhi Sljfx Akfsgk Fine Trimming unit (Multi-profile, by N.C.) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Profile Scraping unit RAS/S Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE Milling grooving unit U (1 SX + 1 DX) 2 x Kw 5,5

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) option: mm 20 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 250 / 3000 (ca.) Adjustable feeding speed (m/min) 12 - 40 m/min (ca.) Psdpek Nk R Djfx Akfjgk Safety sound-proof enclosures/cabins Distance (center-axes) of Disappearing Dogs (mm) 500 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit (1 x Kw 4 (ca.)) Hogging Units (2 x Kw 5,8 (ca.)) Milling-Shaping unit 1 x Kw 4 (ca.) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) Edge coils support (No 2 reels) + Band Pressure zone Snipping (end-cutting) unit (2 x Kw 0,35) ca. Rough Trimming unit (2 x Kw 1) ca. Fine Trimming unit (2 x Kw 0,5 ca.) 0°-30° Multi Function Unit (Profile contour Trimming unit) with 2 revolvers (8+8 folds) - max 27 m/min Milling grooving unit 1 x Kw 4 (ca.) (0° - 90°) Profile Scraping unit + Glue scraping unit + Buffing unit

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) Electronic Programmer Safety and sound-proof enclosure - OPTIONAL No. 4+4 Vertical columns to support the working units Min. useful working width (mm) 150 (ca.) Max. useful working width (mm) 3100 (ca.) Max. useful working thickness (mm) 180 (ca.) Distance between center-axes of the disappearing dogs (mm) 500 (ca.) Adjustable (min/max) feeding speed (m/min) 8-40 (ca.) No. 8 Working groups (for each machine's side): 1 Jumping Scoring Unit Podpsifz H Nofx Akfegk 1 Hogging Unit 1 Jumping Milling Unit 1 Milling-Shaping unit 1 Corners Rounding unit (contour trimming) with 2 vertical motors 1 Belt sanding unit (with abrasive disc) 1 Belt sanding units (with abrasive papers)

Condition: excellent (used), Flexible N.C. line for drilling, routing and "hardware" insertion. Numerical Control "TPA" Albatros. Composed by: 1) Hedgehog loader, with 12 positions (for 12 panels), vertical panel introduction. 2) CNC Drilling and routering machine Mod. Over 25.13 with inserter (for bushes, shelf support and base). - N. 1 operating head (estimated KW 5,5) with tool storing revolver (10 positions) - N. 1 boring head with 24 independent spindles (X axis) - N. 1 boring head with 2 independent spindles (Y axis) - N. 1 boring head with 5 independent spindles (Z axis) - N. 1 insertion unit (bushing screwing) - N. 1 insertion unit (shelf support pressure) - N. 1 storage and feeding tank Pgodehvagkepfx Akfjk 3) Unloader (90° side-deplacement), with motorized conveyor for vertical outfeed of the panel. 4) Unloader - tilting (0°-90) moves the panel from vertical to horizontal, with motorized conveyor

Condition: excellent (used), Year of construction: 2007, I sell the double end cutting and tenoning machine SCM CONCEPT NT. Working width up to 3000mm Configuration left side / fix: 1 pc. cutting saw aggregate 1 pc. moulding aggregate 1 pc. moving jumping moulding aggregate Pgsdpfetv Rxbjx Akfok Configuration right side / moving: 1 pc. cutting saw aggregate 1 pc. moulding aggregate 1 pc. moving jumping moulding aggregate Material pressure feeding band from top Throughfeed machine. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2000, I sell the window angular centre SCM Multiflex. Pgjdpshw Dfyjfx Akfok Moulding heads VIVALDI EU68mm. Cutting + Tenoning spinde right side / Tenoning side. 2 pcs. Profiling spindles + glass strip cutting machine left / Profiling side. Available immediately.

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Pjdpfx Aovyuqfokfsgk

Condition: new, - NEW -- With TERSA cutter block for secondsChange planer knives- TERSA planing knife system enables particularlyquiet running- Helical-toothed steel feed roller forconstant and even wood intake- The particularly long planing tables from onePiece allow easy dressing of theWork pieces- Large planing fence can open when openingthe planing tables remain in position- Planing tables that open to the rear- The high machine weight ensures the highestPrecision and smooth running- Powerful industrial engine- Robust steel / cast iron construction- work tables are made of gray cast iron,post-annealed and stress-free, therebyinsensitive and permanently flat- Table lips for quiet runningEquipment detailsTERSA planing knife shaft- No more adjusting and screwing- Blade change in seconds- Self-locking- Particularly quiet- Perfect planing resultSuction hose connection- The suction nozzle of the planer and thicknesspoint in the same direction.- The hose connection is made by just oneSide off.- No hose is needed aroundthe machine passes ve- Stable chain drive- Steel drive wheels- Solid cast iron bearing blockPlaning mill- Prevent massive kickback protectionthe kickback of workpieces- TERSA planing knife shaft with three knivesensures an optimal planing patternThe material feed- Helical steel feed rollers for oneconstant and even material intakewithout prints- Multiple teeth grip at the same time for powerfulFeed- Wear-free in contrast to rubber feedrollingTechnical specifications:Length approx. 1725 mmWidth / depth approx. 880 mmWeight approx. 270 kgDressing chip removal max. 4 mmExtraction nozzle thickness 2 x 120 mmThick working height min. 3 mmThick working height max. 230 mmThickness of the chip removal max. 4 mmDrive motor power 4 kWConnection voltage 400 VMains frequency 50 HzPlaner knife shaft type TERSANumber of planing knives 3 pcsSpeed ??5200 min¯¹Planing width max. 300 mmFeed speed 7 m / minItem No. 5503031Storage location 97447 Gerolzhofen- free loaded- Pedpfevwgaajx Akfegk

Condition: new, Ideal for demanding craftsmen and carpentersThe particularly long dressing tables made of one piece enable easy dressing of the workpiecesWork tables are made of gray cast iron, making them robust and permanently flatRear-opening dressing tables with tension spring support for quick and easy retoolingThanks to the fixed extraction hood, it is not necessary to reposition the extraction hose during retooling, This saves valuable working timeHelically toothed steel infeed roller ensures constant and even wood infeedRubber outfeed roller in the thickness run-out ensures even wood outfeedMaterial feed with four speedsPlane thicknessing table adjustment via handwheel with integrated display for the planing heightDIGITAL: with electric thicknessing table height adjustment and digital displayOn/off switch in operator positionPowerful industrial motorThe high machine weight ensures maximum precision and smooth paration for slot drilling deviceQuality Made in ItalyTECHNICAL DATADimensions and weightsLength (product) approx. 2250 mm Width/depth (product) approx. 1370 mmWeight (net) approx. 695 kgJointerTotal length of tables 2250 mmChip removal max. Dressing 5 mmDressing fence length 1200 mmDressing fence height 150 mmSuction connectionSuction nozzle diameter thickness 1 x 120 mmInstallation informationSpace requirement length 2250 mmSpace requirement width/depth 1440 mmExplanation of space requirement: The dimensions take into account maximum travel distances or effective cknessThicknessing table length 520 mmThicknessing table width 850 mmWorking height thickness min. 3 mmWorking height thickness max. 240 mmWorking length thickness min. 220 mmChip removal max. thickness 5 mmElectrical dataDrive motor power 7 kWSupply voltage 400 VMains frequency 50 HzPlaner cutterheadPlaner shaft type TERSAPlaner shaft diameter 120 mmNumber of planer knives 4 pcsPlaner shaft speed 5000 min¯¹Planer width max. 520 mmFeedFeed speed 5/8/12/18 m/minSCOPE OF DELIVERYJointer-jointer fence with round bar guide4 feed speedsTersa planer shaftManufacturer no.5503501 Psdsvwflbopfx Akfegk

Condition: new, - Maximum equipment for the professional with Tersa knife shaft.- Ideal for demanding craftsmen and joiners- The particularly long planing tables enable easy dressing of the workpieces- Work tables are made of gray cast iron, because of that insensitive and permanently flat- To the rear, planing tables that open at the same time for short set-up times- Helical-toothed steel feed roller ensures constant and even wood intake- Rubber pull-out roller in the outlet of the thickness ensures even wood pull-out- Material feed at four speeds- Plane thickness table adjustment via handwheel with numerical display for the planing height- TERSA planing knife system enables Knife changes within seconds as well particularly quiet running- The large planing fence (1200 mm x 150 mm) can when opened the planing tables remain in position- The high machine weight ensures the highest Precision and smooth running- Preparation for slot drilling equipment Digital version with electric thicknessing table adjustmentTechnical specificationsTotal length of the tables 2250 mmWorking width 520 mmmax. chip removal 5 mm--- Technical data thickness ---Dimensions thickness table 520 x 850 mmmin./max. Working height 3/240 king length thickness 220 mmFeed speeds 5/8/12/18 m / min Planer shaft diameter / planer knife 120 mm / 4 ed ??5,000 rpmMotor 400V / 50Hz / S6-40% 7.0 kW (9.5 HP)Extraction nozzle diameter 1 x 120 mmWeight 695 kg Slot drilling device (option)Table size 470x230 mmCross / longitudinal stroke 160mm / 110 mmVertical stroke 120 mmExtraction nozzle diameter 1x120 mmManufacturer number 5503511 Pgjdpfx Akovwd U Iofok

Condition: new, - New -Description:TERSA quick-change system for changing planer knives in secondsFour-blade shaft for best planing resultsSmooth running thanks to precision unit and heavy cast iron designLong planing tables for precise planingRobust dressing tables made of ribbed gray cast iron, milled and stress-free, making them insensitive and permanently flatLarge, sturdy aluminum dressing fence with round rod guide (1200 x 150 mm), easily adjustable and tiltable up to 45°With auxiliary fence as standardPowerful 5.0 kW industrial motorSturdy cast steel constructionSlot drilling device can be retrofittedLength (product) approx. 2250 mmWidth/depth (product) approx. 1370mmWeight (net) approx. 465kgJointerTotal length of the tables 2250mmMax. chip removal 8mmDressing fence length 1200mmDressing fence height 160mmSuction connectionSuction nozzle diameter 120mmInstallation informationSpace requirement length 2250mmSpace requirement width/depth 1440mmExplanation of space requirementWorking area length 1000mmWorking area width/depth 3500mmChip removal max. thickness 8mmElectrical dataPower drive motor 5kWSupply voltage 400VMains frequency 50HzItem no. 5503521 Pgedpfovwf Hrjx Akfjk

Condition: new, - new -BeschreibungMit TERSA cutter block for sekundenschnelles HobelmesserwechselnTERSA-Hobelmessersystem ermögclear opening particularly geräuscharmen Lonangular verzahnte steel input roller for konstanten and gleichmäßigen HolzeinzugDie particularly langen Abrichttische aus einem piece ermöglichen leichtes Abrichten der WerkstückeGroßer surface fence kann beim opening der Abrichttische in seiner Position bleibenNach rear öffnende AbrichttischeDas hohe Maschinengewicht sorgt for höchste Präzision and ruhigen LonLeistungsstarker Industrie-motorRobuste steel-/GraugusskonstruktionArbeitstische aus Grauguss, nachgeglüht and spannungsfrei, dadurch unempfindlich and dauerhaft planarsurfacing table lip plates for geräuscharmen LonAusstattungsdetails:TERSA-HobelmesserwelleKein Einstellen and Schrauben mehrHobelmesserwechsel in SekundenSelbstarretierendBesonders low noisePerfektes HobelergebnisAbsaugschlauch-AnschlussDie suction nozzle der surface planer and thickness zeigen in the selbe Schlauchanschluss erfolgt from nur einer side wird kein Schlauch benötigt, der um the machine veStabil ausgelegter KettenantriebAntriebsräder aus steelMassiver GraugusslagerbockHobelwerkMassive Rückschlagsicherungen verhindern den kick-back from WerkstückenTERSA-Hobelmesserwelle with three Messern sorgt for ein optimales HobelbildDer MaterialeinzugSchrägverzahnte Stahleinzugswalzen for einen konstanten and gleichmäßigen Materialeinzug without AbdrückeMehreright hand Zähne greifen gleichzeitig for kraftvollen feederVerschleißfrei im Gegensatz zu GummieinzugswalzenTechnische Daten:dimensions and Gewichtelength (Produkt) ca.     2015 mmweight (Netto) ca.     330 kgwidth/depth (Produkt) ca.     990 mmdrive powercapacity driving motor     5 kWsurface planertotal length der tables     1800 mmchip removal max. surface planer     4 mmworking height     900 mmAnschluss Absaugungsuction nozzle diameter thickness     2 x 120 mmAufstellinformationenrequired space length     2015 mmMaschinenkörper width/depth     596 mmrequired space width/depth    1 460 mmworking dimensions length     1000 mmErläuterung required spaceDie dimensions berücksichtigen maximale Verfahrwege or Nutzläking dimensions width/depth     3500 mmMaschinenkörper length     659 mmErläuterung zu working dimensionsDie angegebenen dimensions bitte with dem required space addieren, um the for the machine empfohlene freie assembly area zu cknessDickentisch length     605 mmworking height thickness max.     230 mmDickentisch width     420 mmchip removal max. thickness     4 mmworking height thickness min.     3 mmElektrische DatenAnschlussspannung     400 VStromart     ACPhase(n)     3 PhNetzfrequenz     50 HzHobelmesserwelleHobelwellentyp     TERSAHobelwellendrehzahl     5200 min¯¹Hobelwellendurchmesser     72 mmplaning width max.     410 mmnumber of Hobelmesser     3 Stfeederfeed speed     7 m/minincluded in deliveryTERSA-Hobelmesserwelleeloxierter Aluminium-surface fenceNo. 550 3414 Pgjdpfx Akevwga Hofek

Condition: new, - new -manufactured by Holzkrafttype FS 41 elite S Tersa DigitalDigitale version with motorischer Dickentischverstellung- Hobelmessersystem ermögclear opening sekundenschnellescutter change soas particularly geräuscharmer Lon- Besonders lange Abrichttische (2200 mm)aus einem piece ermöglichen leichtes  Abrichten derWerkstücke- Arbeitstische sind aus Grauguss, nachgeglüht andspannungsfrei, dadurch unempfindlich and dauerhaft planar- Gleichzeitiges opening der tables- to rear, gleichzeitig öffnende Abrichttische for kurzeRüstzeiten- Leistungsstarker Industrie-motor- Festmontierte dust extraction hood- robuste steel-/Graugußkonstruktion- Gleichzeitiges opening der tables- großer surface fence (serial-production with auxiliary fence)- Materialvorschub with two speeds aboutspearatem motorTechnische Daten:total length der tables:  2200 mmworking width:   410 mmmax. chip removal: 5 mmthickness:dimensions Dickentisches: 775x410 mmmin/max. working height:  3/240 mmfeed speeds: 6/12 m/elwellen D./Hobelmesser: 95 mm/4 piecerpm:   5000 1/minmotor 400 V/50 Hz/S6 - 40 % 5,0 kW (6,6 PS)suction nozzle diameter: 1 x 120 mmweight:    450 kgArt-No.: 550 3441located in: 97447 Gerolzhofen- free on truck- Psdpfjvwgc Uex Akfjgk

Condition: new, - New -Description:- For sawing, milling, surface planing, thickness planingand optional slot drilling- The work tables made of heavily ribbed gray cast ironand the underframe made of welded steel guaranteeTorsion resistance and vibration-free work- Unique in this performance class: smootherAluminum format slide, anodized, with ball contact system- Swiveling saw blade from 90 ° - 45 °- Table bracket with graduated scale and aluminum crosscut fencefor angled cuts on plates and large workpieces- Planing unit with TERSA quick change systemwith three planer knives- Helical-toothed steel feed roller for constantWorkpiece infeed when thicknessing- curved milling protection hood for profiling,with fine adjustment as standard- Milling unit with two speeds- The units are driven by three independent motors- Made in Italy qualityTechnical specifications:Dimensions and weightsWeight (net) approx. 245 kgDressingPlaning table width 300 mmPlaning table length 1200 mmAngle of inclination saw / planer fence 90/45 °Chip removal ssing 3 mmConnection suctionExtraction nozzle diameter 4 x 120 mmSuction nozzle diameter of the saw blade guard 60 mmInstallation informationRequired space length 2460 mmSpace requirement width / depth 2155 mmExplanation of space requirements: Take the dimensions into accountmaximum travels or useful cknessThickness table length 450 mmThickness table width 300 mmWorking height thickness min. 3 mmWorking height thickness max. 200 mmChip removal max. Thickness 3 mmElectrical dataConnection voltage 400 VMains frequency 50 HzNominal operating mode drive motor S6Duty cycle of drive motor 40%Drive motor power 3 x 1.8 kWSliding carriage and tableFormat sliding carriage length 1140 mmFormat sliding carriage width 201 mmFormat sliding carriage height 70 mmTable length 1024 mmTable width 224 mmTable height 900 mmMilling spindleSpindle inclination 0 °Spindle mandrel diameter 30 mmUsable length of the spindle 75 mmSpindle speed (s) 5000 - 7500 min? ¹Milling tool diameter l diameter max. 160 mmTool diameter can be lowered 180 mmTool diameter max. Tenon milling 275 mmPlaner knife shaftPlaner shaft type TERSAPlane shaft diameter 62 mmNumber of planing knives 3 pcsCircular saw unitTrimming length 1200 mmCutting width with rip fence 540 mmMax. Cutting width to the left of the saw blade 1200 mmSaw blade inclination 90 - 45 °Max. Cutting height at 90 ° 67 mmMax. Cutting height at 45 ° 40 mmMax. Saw blade projection 90 ° 75 mmMax. Saw blade projection 45 ° 60 mmFeedFeed speed 6 m / minScope of delivery:- Tersa quick-change planer knife shaft- anodized aluminum sliding table- Multifunctional stop for parallel cuts and surface planing- Table extension arm with crosscut fence and stop jaw- Eccentric clamping armItem no .: 5500030 Pedpfx Aovwf Enjkfogk

Condition: used, Year of construction: 2006, incl. 2nd sanding padused, top equipmentmake SCM Samcotype EG 2500year of manufacture 2006machine . AM/28506motor 3.0 / 2.2 kWsanding length approx. 2500 mmsanding width approx. 1000 mmbelt length approx. 6800 mmtable size approx. 2500 mm x 1000 mmcranking right approx. 700 mmcranking left approx. 700 mmelectric adjustmentupper belt coverupper sanding supportbelt speeds 1400 /2800 rpm = 23 m/sec /46 m/secright-left runsuction connection D 160 mmspace requirement approx. 3900 mm x 1700 mm x 1500 mmtotal connected load approx. 4.55 kWstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in as-is condition as inspected,without guarantee and warranty Podpovwffbofx Akfegk