Used Scm Windor for sale (658)

Condition: used, Year of construction: 2022, Panel saw Manufacturer: SCM Type: NOVA 400 Year of manufacture: 2022 Technical data Hsdpfx Ais Adr Hljrjw Length of sliding table: 3200 mm Maximum saw blade diameter: 400 mm Power supply: 400 V Machine weight: approx. 718 kg Equipment Sliding table made of aluminum Machine start buttons on the sliding table Parallel fence with digital position display Scoring device for clean cuts in composite panels Cross-cutting fence with stops for repeatable cuts Rip fence with position lock Upper saw blade guard on an independent support arm Extension table for large panels Adjustable saw blade height and tilt angle Control panel with emergency stop button Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2017, I sell the panel beam saw SCM SIGMA PRIMA 67 P. Year 2017. Cutting size 3300x2200mm + back loading table. Cutting height 67mm. Main motor 9,0 kW Scoring motor 1,3 kW Max saw blade diameters 330 + 160mm Total area covered W.5400mm x D.9900mm 9 pcs. gripper with pneumatic regulation Side alignment with pneumatic stroke. Hodpez Suv Hsfx Airow Wincut optimising software included. Very good condition. Available immediately.

Condition: used, Year of construction: 2017, ++ without ST package ++ can be purchased separately CNC-CONTROLLED MACHINING CENTER KEY FEATURES "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS TECHNICAL DATA AXES Pratix S22 Working area in X-Y-Z axis * mm 22-43 = 4286-2155-150 Travel X-Y-Z axes mm 22-43 = 4970-2585-250 Travel speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area pcs 4 Vacuum pump (Opt.) m³/h 90/108 - 250/300 DRILLING UNIT Hedpjz Ebzhsfx Airow Vertical spindles No. – rpm 7 (5X-3Y) 6,000 – 12 (8X-5Y) 6000 Horizontal spindles (Opt.) No. – rpm 4 (2X-2Y) 6,000 – 6 (4X-2Y) 6000 Integrated saw blade in X (Opt.) Ø mm – rpm 120 – 7500 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed rpm 24000 Side tool changer 13 positions INSTALLATION Installed power kVA 23÷28,5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/sec 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage Only electrospindle or electrospindle + drilling unit: diameter 200 mm; extraction air requirement 3400 m³/h In conjunction with the slider for panel output, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC-controlled machining center for processing panel materials. Self-supporting structure and work table Box structure made of cold-rolled steel, consisting of rectangular sections that are welded together; multifunction work table made of aluminum with a single working area. Holes in a 120 mm grid for vacuum connection, can be easily removed using a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be processed. Moving gantry This is a gantry structure made of cold-rolled steel in a box design, consisting of right-angled sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a tool quick-change system type HSK63F. Travel paths of the gantry and the unit carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides with the help of pre-tensioned Movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive and oblique The movement of the unit carrier in the Z direction takes place via pre-tensioned Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servomotors and digital CONTROL The control unit consists of a numerical control for milling and drilling machines and a user interface with remote control with a 7" touchscreen color screen. The Xilog Maestro machine operating interface offers optimal communication between operator and the machine for all programming functions.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: AB / 162765, overall weight: 1,410 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, input current: 33 A, We offer this used SCM COMPACT XL 4-side planer, year of construction 2004. Serial number: AB/162765 Year of manufacture: 2004 year Weight: 1.410 kg Nominal voltage: 400 V Phases: 3 Current: 33 A Hsdpfsz Hacyex Airsw Frequency: 50 Hz Short-circuit current: 10 kA If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2019, overall weight: 1,259 kg, This SCM SI 5 panel saw was manufactured in 2019. It features a maximum cutting height of 200 mm at 90° and a sliding table version of 3800 mm, allowing for format cuts up to 3800 x 3200 mm. The machine is equipped with an "EASY TOUCH 7" electronic control unit, enabling up to 999 storable programs. If you are looking to get high-quality cutting capabilities, consider the SCM SI 5 panel saw we have for sale. Contact us for further details. - Controlled Axes: Up to 3 axes (Main Saw Height, Main Saw Tilt, Programmed Rip Fence / Scoring Unit positioning) - Voltage: 400 V - Phases: 3 ~ - Current: 22 A - Frequency: 50 Hz - Short-circuit current (Icc): 12 kA - Main Motor Power: 9 kW (12 HP) at 50Hz (with automatic star-delta starter) - Scoring Motor Power: 0.9 kW (S6-40%) - Main Saw Blade Diameter: Up to 550 mm (without scoring blade); up to 450 mm (with scoring blade) - Max. Cutting Height at 90°: 200 mm - Max. Cutting Height at 45°: 130 mm - Saw Blade Swivel: 46° - Saw Blade Speeds: 2500 / 3500 / 5000 RPM - Scoring Saw Speed: 8500 RPM - Cutting Width at Rip Fence: 1500 mm - Sliding Table Version: 3800 mm (Format cuts up to 3800 x 3200 mm) - Exhaust Socket Diameters: 120 mm (on frame), 100 mm (on saw blade guard) - Fence System: Programmed rip fence with THK guide and recirculating ball screw (25 m/min speed), fully swingable under the table - Blade Clamping: "Pro-Lock" system for quick clamping of main saw blade with keyless riving knife adjustment Hjdo Adti Uopfx Airjw

Condition: excellent (used), SCM sandya 3s 950mm WIDE BELT SANDER Sanding width: 950 MM 1 calibrating unit with a metal roller 2 combination unit with a rubber roller and sanding pad The sanding pad has an oscillating motion One motor for 2 units - 7.5 kW Oscillation controlled by photoelectric cells Hsdpfe Afunhjx Airjw 2 feed speeds Electric table adjustment Table position display Thickness gauge Very good condition, inspected, ready for operation

Condition: excellent (used), SCM F520e Planer 4 cutting knives, Comb plates on the table, Electrically adjustable feed table, width 520mm, table length 3000mm, Hedpfxe Agf Eie Airow adjustable fence, brake, well-maintained machine, quiet operation.

Condition: like new (used), functionality: fully functional, spindle diameter 35mm 5 speeds from 3000 to 10,000 rpm motor power 5.5 kW Maggi feed system with 4 rollers and adjustable speed Hedezx U Nuopfx Airjw indexing carriage with a graduated scale for angle adjustment table 120x730 cm 760 kg year of manufacture: 2001 DTR manual – YES CE marking – YES guard for mortising AIGNER table tops 4 feed speeds turret for adjusting milling depth option to purchase without the feed system external dimensions: 2550x1700x1660

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: AA1/015841, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 6,050 mm, travel distance Y-axis: 1,240 mm, travel distance Z-axis: 200 mm, number of slots in tool magazine: 12, total length: 7,250 mm, total width: 2,420 mm, overall weight: 4,800 kg, table length: 6,050 mm, table width: 1,240 mm, Equipment: CE marking, SCM RECORD 100 AL XL CNC machining center, manufactured in 2006. A machine from the renowned Italian manufacturer, SCM Group, designed for professional processing of wood, MDF, plywood, chipboard, and other wood-based materials. Model: RECORD 100 AL XL Year of manufacture: 2006 Weight: 4800 kg Power supply: 400 V / 3 phases / 50–60 Hz Rated current: 62 A Technical specifications Working area / axes: X-axis: 6050 mm Y-axis: 1240 mm Z-axis: 200 mm Rapid traverse X: 60 m/min Rapid traverse Y: 45 m/min Rapid traverse Z: 30 m/min Electrospindle: manufacturer: SCM power: 8.5 kW maximum speed: 24,000 rpm tool holder: HSK-F63 automatic tool changer automatic magazine: 12 HSK-F63 tools Drilling unit: 7 vertical spindles 5 horizontal/angled spindles capability for vertical and side drilling Vacuum system: 2 × Becker VTLF 250 vacuum pump performance of one pump: 248 m³/h at 50 Hz total rated performance: 496 m³/h Hsdpfezynkhox Airsw power of one pump: 5 kW vacuum: 200 mbar Other equipment manual manipulator for machine operation table with vacuum clamping system capability for processing parts with a length of over 6 meters central chip extraction system from the machining head brush guard for the machining head safety mats complete enclosure of the working area CE marking The machine has a large working area of 6050 × 1240 mm, making it suitable for both standard panels and the processing of very long parts. The powerful 8.5 kW / 24,000 rpm / HSK-F63 electrospindle, automatic tool changer, and 12-position HSK magazine allow for the performance of various operations without manual tool changes. An additional advantage is the drilling head equipped with 7 vertical and 5 horizontal spindles, as well as a highly efficient vacuum system with two Becker VTLF 250 pumps with a total rated performance of approximately 496 m³/h. The machine has a solid, industrial-grade construction – weight 4800 kg.

Condition: like new (used), Year of construction: 2012, functionality: fully functional, I sell the horizontal foil wrapping packing machine Hsdpor Alx Usfx Airjw Producer: SCM GROUP, Italy Model: PACK 8080 Year: 2012 / like NEW, almost not used before Working circle diameter 1300mm. Working tables width 900mm. Feeding manual with tables total length 2,60m Assembled, ready for work. Avialable immediately. On stock.

Condition: excellent (used), Year of construction: 2020, Equipment: Manual adjustment of the milling spindle with digital display Hodpe Aayg Eofx Airew Milling fence with crank adjustment of the fence jaws and digital display Electrical preparation for feed mechanism Speed indicator Right/left rotation of the milling spindle with electrical locking during switching Automatic motor brake CE conformity declaration Technical data: Spindle extension length 140 mm Milling spindle diameter 30 mm Spindle speeds 3000/4500/6000/7000/10000 rpm Overhang of the spindle base from the table 5 mm Dust extraction port diameter 2 x 120 mm INCLUDED OPTIONS: - Milling fence with crank adjustment - Aluminum fence jaws instead of the wooden fence jaws on the milling fence - LL version with 2 cast iron table extensions, length 2500 mm - Motor power: 7.0 kW, 400 V, 50 Hz Note on used machines: • Errors in technical data and prior sale reserved. • Quoted prices are ex works, collection only - free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claim. The buyer is free to inspect the machines at the location. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address + telephone number!)

Condition: used, Year of construction: 2007, functionality: fully functional, working width: 630 mm, grinding width: 630 mm, overall weight: 500 kg, grinding height: 160 mm, working height: 160 mm, height adjustment type: electric, type of input current: three-phase, SCM Sandya Win wide belt sander Hodpfxj Agvzzj Airow Working width: 630 mm Sanding height: 3 – 160 mm 1 combi unit Electric height adjustment Optical oscillation Two feed speed options Main motor power: 5.5 kW

Condition: used, Year of construction: 2021, CNC MACHINING CENTER Morbidelli N100 KEY FEATURES "BUMPERS": THE PERFECT COMBINATION OF SAFETY AND PRODUCTIVITY "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS AXES Morbidelli N100 12 Morbidelli N100 15 Morbidelli N100 18 Morbidelli N100 22 Working area in X-Y-Z axis * mm 2486-1255-150 3686 TECHNICAL DATA -1555-150 3686-1860-150 22-31 = 30862185-150 22-43 = 42862185-150 Travel X-Y-Z axes mm 3120-1685-250 4320-1985-250 4320-2285-250 22-31 = 37702585-250 22-43 = 49702585-250 Traverse speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area No. 4 Vacuum pump (Opt.) m³/h 250/300 DRILLING UNIT Vertical spindles No. – RPM 7 (4X-3Y) 8000 – 12 (8X-4Y) 8000 Horizontal spindles (Opt.) No. – RPM 4 (2X-2Y) 8000 – 6 (4X-2Y) 8000 Integrated saw blade in X (Opt.) Ø mm – RPM 125 – 10000 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed RPM 24000 Lateral tool changer 8 positions 10 positions 11 positions 13 positions INSTALLATION Installed power kVA 23÷28.5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/s 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 1950 2200 2500 22-31 = 2550 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage only electrospindle or electrospindle + drilling unit: diameter 200 mm; Extraction air requirement 3,400 m³/h In conjunction with the strip for panel ejection, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC machining center for processing panel materials. Self-supporting structure and work table Box construction made of cold-rolled steel, consisting of rectangular sections welded together; multifunctional work table made of aluminum with a single working area. Holes in a grid of 120 mm for vacuum connection, easily removable via a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be machined. Moving gantry It is a gantry structure made of cold-rolled steel in a box construction, consisting of rectangular sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a quick-change tool system of type HSK63F. Travel of the gantry and aggregate carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides by means of pre-tensioned ball screws. The movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive. The movement of the aggregate carrier in the Z direction takes place via pre-tensioned ball screws. Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servo motors and digital control units. CONTROL The control unit consists of a numerical control. Hedoz Iyvpjpfx Airow

Condition: excellent (used), Year of construction: 2019, Clean air filter (filter class M, filter bags, i.e. suitable for fine dust) Technical data: Motor power: 7.5 kW / 3-phase / 400 V / 50 Hz Intake nozzle diameter: 300 mm Max. volume flow: 5,750 m3/h Negative pressure at rated flow: 3,100 Pa Filter area: 30.0 m2 Number of filters: 60 pcs Compressed air cleaning Incl. integrated pre-separator Incl. integrated extinguishing system (connection to the water supply) Chip collection volume: 3 x 250 l Sound pressure level: 75 dB(A) Incl. dust baffle Incl. CE & all documents Dimensions L x W x H = 3435 x 1100 x 2440 mm Weight 850 kg Note regarding used machines: Hode Aazbwjpfx Airsw • Subject to errors in technical data and prior sale. • Indicated prices are ex-works prices, collection only - free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machine on site. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address + telephone number!)

Condition: used, Year of construction: 1990, Working width 520 mm Length of the planing table 3000 mm Number of knives 4 St. Motor output 4 kW Dimensions (L/W/H) 3000 x 1000 x 1200 mm weight of the machine ca. 850 kg Hjde Agw Smjpfx Airjw cutting capacity 20 mm SCM F520 surface planer (jointer) Total table length: 3000 mm Infeed table length: 1780 mm Outfeed table length: 1180 mm Working width: 520 mm Cutterblock with straight knives Cutterblock diameter: 120 mm Cutterblock speed: 5000 rpm Number of planer knives: 4 Max. depth of cut: 20 mm Table height: 860 mm Motor power: 4 kW (5.5 hp) Available from stock, loaded onto transport

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: AA10001621, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 3,086 mm, travel distance Y-axis: 2,185 mm, travel distance Z-axis: 150 mm, workpiece height (max.): 150 mm, number of slots in tool magazine: 20, controller manufacturer: SCM, overall weight: 2,550 kg, feed length X-axis: 3,770 mm, feed length Y-axis: 2,585 mm, feed length Z-axis: 250 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 6 m/min, spindle motor power: 9,500 W, nominal power (apparent): 29 kVA, number of spindles: 1, rapid traverse Z-axis: 15 m/min, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rotational speed (max.): 24,000 rpm, rotational speed (min.): 1,500 rpm, spindle speed (max.): 24,000 rpm, spindle speed (min.): 1,500 rpm, tool diameter: 160 mm, tool length: 160 mm, distance between spindles: 32 mm, Equipment: chip conveyor, documentation/manual, SCM MORBIDELLI N100 22-31 C – CNC Milling and Drilling Machining Center Brand and Model: SCM MORBIDELLI N100 22-31 C Hjdpfxswtdt Ue Airjw Serial Number: AA10001621 Year of Production: 2019 Condition: Excellent Location: Croatia Technical Specifications: Working Area (X x Y x Z): 3086 x 2185 x 150 mm Vacuum Table: High Efficiency Multipurpose Aluminum Table (HE) Vertical Drilling Head: 12 Spindles (7X / 5Y), 8000 rpm Horizontal Drilling: 3 Units (2X + 1Y), 8000 rpm Integrated Saw (X-Axis): Ø125 mm, 10000 rpm Main Milling Spindle: 9.5 kW (13 HP), HSK 63F, 24000 rpm Tool changer: 20 positions (19 at the rear + 1 in the cabin for quick change) Vacuum pumps: 2 x 250/300 m³/h Dust extraction: 5300 m³/h + 3400 m³/h for unloading pusher, Ø250 mm Machine weight: approx. 2550 kg Total installed power: 23–28.5 kW Control and software: Control via Xilog Maestro system + Eye-M PRO console Industrial computer with Windows Embedded 7 operating system 21.5" touch screen Included nesting optimization module and additional software licenses Built-in accessories: 1. Automatic tool length measuring device 2. TECPAD remote control with 7” touch screen 3. Lateral pick-up for additional tools 4. F18L doweling machine with RO-AX system 5. Two-field positioning for work in two working zones (A + D) 6. Automatic central lubrication 7. Air blowing and micro-lubrication system for processing demanding materials (e.g. aluminum panels) 8. Vacuum cup set 9. Automated unloading system: pusher + conveyor belt 10. Predisposition for automatic loading device 11. Interpolating vector axis with digital control for the 4th axis The machine has been used exclusively in professional conditions, regularly maintained and fully functional. Ready for immediate use in industrial production.

Condition: used, Year of construction: 2022, HORIZONTAL PANEL SIZING SAWS GABBIANI P KEY FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLE: AN INDISPENSABLE TOOL LATERAL SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL SPECIFICATIONS gabbiani p80 Saw blade overhang mm 80 Work table height mm 950 Number of clamps standard 5 Number of clamps maximum for versions 33 9 CUT DIMENSIONS Version 33 (Opt.) mm 3300x3200 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable slider speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (Star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz U/min 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING SAW Motor power (S6 -40%) - 50hz kW (HP) 1,5 (2) Speed – 50 hz U/min 5850 Scoring saw diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power Kw 12÷15 Base machine voltage Euro Voltage (400 V / 50 hz) Compressed air requirement l/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2190 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: for countries where EC standards apply, the forward feed speed of the slider is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for cutting panels made of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame made as a steel tube construction - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal stop on the left side Saw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring saw blade - Vertical stroke of the saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the best cutting quality - Running direction against the longitudinal stop - Saw carriage drive via rack and pinion - Carriage run on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year guarantee), protected by special dust scrapers - Pneumatic switch for quick and safe changing of the main saw blade and the scoring saw Pressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to prevent collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam to clean the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning slider and rear part of the machine - Positioning slider over the entire length with motor drive via a robust shaft. Positioning slider movement on a double T-beam. The drive is via 2 precision pinions, which guarantee constant parallelism between the slider and the cutting line. The slider is controlled by a brushless motor to enable the regulation of the speed according to the requirements for positioning and a quick return - Stepless dru Hsdpfoz Ehvxjx Airjw

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, working width: 240 mm, spindle diameter: 40 mm, working height: 120 mm, overall weight: 5,050 kg, power of feed motor: 11 W, spindle speed (max.): 8,300 rpm, spindle speed (min.): 8,300 rpm, jointer table length: 2,500 mm, number of spindles: 6, Four side planer SCM TOPSET XL: - working width: 240 [mm] - working height: 120 [mm] - number of spindles: 6 - spindle diameter: 40 [mm] - feed speed: 6-60 [m/min] Planer in very good condtion. First owner! Hsdpeizxf Hjfx Airew

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- Available as an OPTION at an additonal cost of 20.000 Euro: extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): ----- - ??Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Hjdpfx Asy Hl Iyjirsw Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, SCM SANDYA 15S sanding machine – used machine, arriving at our warehouse soon. Hedpo Agu Efsfx Airsw - Working width: 1100 mm - 3 rollers - V380/50 - CE Tecnomac code: CAL-058

Condition: like new (used), Year of construction: 2025, We offer this as a new SCM Morbidelli CX110 CNC Drilling, year of construction 2025, still on warranty! Only a few months in use SCM Morbidelli CX110 CNC – 2025 CNC Drilling and Routing Center for Woodworking We offer for sale a brand-new SCM Morbidelli CX110, a high-performance CNC drilling and routing center designed for precise, flexible processing of wood panels and similar materials. Ideal for industrial production with high efficiency and accuracy. Machine Description Hedpfxjy Hf H No Airsw The Morbidelli CX110 is a compact yet powerful CNC machining center, combining advanced drilling and routing capabilities. With a footprint of less than 10 m², it is perfect for workshops that require high performance in a limited space. Main Features 7.5 kW electrospindle (up to 24,000 rpm) drilling unit (13 vertical + 5 horizontal spindles) Integrated saw blade 6-position automatic tool changer High precision and rigidity Suitable for drilling, routing, and cutting Control & Software eye-M PRIME integrated PC 24” Full HD touchscreen Maestro software (Active, Lab, Connect) Remote teleservice and IoT monitoring Technical Data 400V / 50Hz 31.5 kVA Max current: 46 A Commercial Details Our price: 30,000 EUR (excl. VAT) Transport in EU: included on price Location: Kosovo Buyers are welcome to visit our factory and see the machine in operation under real production conditions. Dismantling and transport within EU countries are included in the price

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: AE00003735, overall weight: 4,300 kg, input frequency: 50 Hz, input current: 126 A, input voltage: 400 V, warranty duration: 12 months, Basic information Manufacturer: SCM Group / DMC Model: DMC Eurosystem M4 1350 Year of manufacture: 2023. Condition: unused, new Operating hours: 0 h Working width: 1.350 mm Working thickness: 3-200 mm Feed speed: 2-16 m/min Power supply: 400 V, three-phase, 50 Hz Rated current: 126 A Weight: approximately 4,300 kg Serial number: AE00003735 Location: Tenja, Croatia Availability: immediately Description; For sale is an unused SCM DMC Eurosystem M4 1350 automatic wide-belt sanding and calibrating machine, manufactured in 2023. The machine has never been used in production and has 0 operating hours. It is installed at our production facility and is available for inspection by prior appointment.   Working unit configuration 1st working position - sanding roller • R 320-2620 sanding unit • Roller diameter: 320 mm • R45 rubber-coated roller, 45 Shore hardness • 15 kW motor with frequency inverter • Oscillating abrasive-belt blowing and cleaning system 2nd working position - brush unit • BF 300 brush unit • SI 300-E helicoidal brush roller • 3 kW motor with frequency inverter • Abrasive inserts, grit 180 and 240 • Automatic electronic brush position setting • Side oscillation and reversible brush-roller rotation 3rd working position - brush unit • BF 300 brush unit • SI 300-E helicoidal brush roller • 3 kW motor with frequency inverter • Abrasive inserts, grit 180 and 240 • Automatic electronic brush position setting • Side oscillation and reversible brush-roller rotation 4th working position - superfinishing sanding pad • S-2620 unit with superfinishing sanding pad • PE 32/L EPICS electronic sectional sanding pad • Segment pitch: 32 mm • 11 kW motor with frequency inverter • Electronic working-pressure control • Oscillating abrasive-belt blowing and cleaning system   Outfeed finishing unit • SB/U oscillating finishing unit • SB 200 UFC Ultra Fine brush roller Hodpfx Aozyghljirsw • Silicon-carbide fibres • Rotating blowers for final workpiece cleaning Additional equipment • Fixed working height of 900 mm • BL 32 electronic infeed panel-reading bar • EPICS electronic sectional-pad system • Vacuum conveyor system with motor up to 7.5 kW • Perforated vacuum conveyor belt • Rubber-coated conveyor belt, 50 Shore hardness • 2.2 kW conveyor-belt drive motor • Front and rear roller support tables • Eye-M industrial PC • 21.5-inch Full HD touchscreen • Maestro Pro-Sand control software • Remote service capability • Operator interface in English and Croatian • CE-compliant version Inspection and terms of sale; The machine is available immediately and can be inspected by appointment at our production facility in Antunovac, Croatia. The machine is offered ex location. Dismantling, loading, transport and installation at the buyer's site will be agreed separately. All technical information is based on the original SCM quotation and the machine identification plate. The buyer may verify the specifications and condition during inspection. Additional photographs, videos, the original technical specification and the relevant SCM documentation are available to serious prospective buyers. Price; EUR 125,000 net, plus VAT - negotiable

Condition: used, SCM COMPACT XL edge trimming machine – used machine, arriving at our warehouse. - Working width: 230 mm - 2 controlled axes (height and width) - Complete with tools Hjdpfx Aij Aguyherew - V380/50 - CE Tecnomac code: SCO-016

Condition: used, Year of construction: 2003, Working width: 520 mm Planing height: 250 mm Planing cutterhead: Tersa Number of knives: 4 Height adjustment: electric Thickness display: Scale Feed rate: 2 speeds Infeed roller: Steel Hedpfx Aioz A D Ulerew Outfeed roller: Steel Table rollers: no Motor power: 5.5 kW Dust extraction connection: 140 mm Machine length: 1200 mm Machine width: 1400 mm Weight: approx. 900 kg

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, SCM GABBIANI P80 – Automatic CNC Beam Saw Brand / Model: SCM Gabbiani P80 Year of manufacture: 2022 Location: Croatia Hedpfx Aswtgdisirow Condition: Excellent working condition, currently in production Technical specifications: * Panel dimensions: 3300 × 3200 mm * Main saw motor: 11 kW (15 HP), blade Ø 340 mm * Scoring unit: 1.3 kW, blade Ø 200 mm * Maximum cutting height: 80 mm * Saw carriage speed: 6–60 m/min * Pusher speed: up to 60 m/min * Installed power: 12–15 kW * Compressed air consumption: 300 NL/min * Dust extraction: 4 × Ø120 mm connections, total 2,190 m³/h Equipment: * Maestro Active Cut control system (PC/PLC) * eye-M operator console * Maestro Ottimo Cut optimization software * Label printer * Teleservice module The machine is in excellent condition and can be inspected under power. Available due to production reorganization and installation of a new automated SCM Flexstore system. Additional photos, videos and technical information available upon request.