Used Screen System for sale (42,166)

Condition: used, Nikon Type: VMZ-R3020 XYZ measuring ranges: 300 x 200 x 200 mm *TZ type with objective with low magnification: 250 x 200 x 200 mm Display resolution: 0.01 μm Maximum permissible deviation (MPE) EUX, MPE EUY, MPE 1.2 + 4L / 1000 µm EUXY, MPE 2.0 + 4L / 1000 µm EUZ, MPE 1.2 + 5L / 1000 µm Maximum sample weight 20 kg (Guaranteed accuracy: 5 kg) Camera Black and white / color 1/3 CMOS camera Working distance Tedpfx Aoyiy Hbeired Type 1, 2, and 3: 50 mm Type 4: 30 mm Type TZ: (High magnification) 11 mm / (Low magnification) 32 mm Type A: 73.5 mm (63 mm with laser AF) Laser AF repeatability range 1), 3) 2σ ≦ 0.5 µm Illumination Type 1, 2, 3, and 4: Incident light, transmitted light, and 8-segment ring light with 3 angles of incidence *white LED / Type 4 has only 1 angle Type TZ: Left objective: Episcopic, dark field; Right objective lens: Incident light, transmitted light, dark field Type A: Incident light, transmitted light, and 8-segment ring light with 1 angle of incidence *white LED Power supply, power consumption AC100 V-240 V, 50/60 Hz / 4 A – 2 A Dimensions & weight Main body with table (W x D x H): 700 x 730 x 1793 mm / approx. 265 kg Controller: 190 x 450 x 450 mm / approx. 12 kg Footprint (W x D): 2700 x 2400 mm Condition: used Scope of delivery: (See picture) (Changes and errors in technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, KUKA Type: KR 10 R900 sixx / KRC4 KUKA industrial robot complete system Robot: KR 10 R900 sixx Controller: KRC4 including KUKA smartPAD, cable set and accessories For sale is a KUKA industrial robot as a complete system from a commercial inventory. The system is ideally suited for automation tasks in industry, laboratories, assembly, handling, pick-and-place applications, testing tasks, and general robot applications. The 6-axis robot is designed for precise and rapid movements and can be used for gripping, positioning, feeding, moving, and processing components. The system offered consists of a robot arm, KRC4 controller, smartPAD, cables, and other accessories as shown in the pictures. Technical data: Manufacturer: KUKA Roboter GmbH Robot type: KR 10 R900 sixx Article No.: 10016515 Serial number: 500874 Payload: 10 kg Reach: 901 mm Axes: 6 Robot weight: 52 kg Controller: KRC4 Article No.: 11019802 Serial number: 224377 Controller weight: 33 kg Controller connection voltage: 1 x 230 V Mains frequency: 50/60 Hz Full load current: 12 A Mains fuse: 16 A Total system weight (approx.): 90–110 kg Robot dimensions (approx.): Reach 901 mm Controller dimensions (approx.): compact KRC4 design Software / Display according to system: KRC SR version: V8.2.3 HMI version: 8.2.0.4 B22 Base system: KSS 8.2.21_SR Installed options according to display: ExpertTech 3.1.1 Gripper-&-SpotTech 3.0.5 OrangeApps.MqttClient 2.2.12 Profinet KRC-Nexxt 2.2.7 RemoteService 1.0.2 UserTech 3.1.4 Description / Functions: The robot can be used for handling and automation processes, e.g. for gripping, transferring, feeding, positioning or processing workpieces. The 6 axes enable flexible movement in space. The compact design and the reach of 901 mm make the system particularly interesting for confined working areas and automated production cells. Total system weight (including controller and accessories, approx.): 90 – 110 kg Condition: used visually with typical signs of wear the screen and system information can be seen in the photos the visual condition can be seen in the pictures Scope of delivery: (See picture) KUKA KR 10 R900 sixx robot arm KUKA KRC4 controller KUKA smartPAD Connection and linking cables other accessories as shown in the pictures Important: The images are the only basis for the scope of delivery. Tjdpfx Aoy Dt D Djirjd "The table shown in the photos is not part of the sale." Commercial sale (Changes and errors in the technical data, information are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: new, 1 brand-new universal milling head system "HURON" with hydraulic tool clamping Manufacturer: EMENA - MTE, Origin: Spain Model: VAR 3 - BF, BM, COMPACT Technical data: Spindle mounting: DIN 69871 ISO 50 Overhang: 358 mm Max. speed range: 3000 rpm Max. drive power: 22 kW Mounting flange: Outer diameter: Ø 306 mm Dimensions L x W x H: 460 x 306 x 360 mm Weight: approx. 150 kg Accessories / Special features: • 2 swivel plane system "HURON" • Hydraulic tool clamping Tsdpfszdbxbjx Aired • For retrofitting to conventional, NC or CNC milling machines or panel milling machines or drilling machines (e.g.: MTE, LAGUN, CORREA, ZAYER, CME, ANAYAK, AYCE, SACEM, JUARISTI, UNION, ARSENAL, AUERBACH, ...) Delivery time: approx. 12-14 weeks after order receipt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: used, 3D Systems Type: ProJet 3000 HD Uninspected ProJet 3D printers The ProJetTM HD 3000 prints precise plastic parts for use in functional tests, as communication models, for rapid manufacturing, rapid tooling, and other applications. With features such as a wide selection of materials, various resolution modes, and ease of use, these office-friendly 3D printers accelerate and maximize your return on investment (ROI). Printing Modes: HD - High Definition UHD - Ultra High Definition Net build volume (xyz) HD mode: 298 x 185 x 203 mm UHD mode: 127 x 178 x 152 mm XHD mode: n/a Resolution: HD mode: 375 x 375 x 790 DPI (xyz); 32μ layer thickness UHD mode: 750 x 750 x 890 DPI (xyz); 29μ layer thickness XHD mode: n/a Accuracy (typical): 0.1 - 0.2% of part dimensions Accuracy depends on build parameters, part geometry, part placement, and post-processor settings Email notification: No Build materials: VisiJet® EX200 build material: Durable solid material with a long service life VisiJet® SR200 build material: Cost-effective, multi-purpose material. Available in natural, blue, or gray. VisiJet® HR200 build material: Available in blue, specifically developed for investment casting applications. Support material: VisiJet® S100 support material: Non-toxic wax material for melting the supports without manual intervention Power supply: 100-127 VAC, 50/60 Hz, single-phase, 15A Dimensions (L x W x H) printer without packaging: 737 x 1215 x 1504 mm Weight: printer without packaging: 254 kg ProJet Accelerator Software: Easy setup of the print job, template and queue management Automatic part placement and processing optimization tools Extensive part file editing tools Automatic support generation Job statistics Network compatibility: 10/100 Ethernet interface Hardware requirements: 1.8 GHz with 1 GB RAM (Open GL support 64 MB video RAM) or more Operating system: Windows XP Professional, Windows Vista, Windows 7 Supported file formats: STL and SLC Ambient temperature: 18-28 °C Tsdpjzdnnuofx Airsd Noise level

Condition: used, Item: inos iSENS laser sensors Item: inos iSENS laser sensors with control unit, cable, PC interface Todpfx Aezdn T Roired Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Laserline Type: LPC03 Lascon laser system with Lascon controller LPC03 Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Tedpfxozdqkrj Airjd Wavelength of 935 nanometers +/- 10% Laser power: 550 W Supply voltage 100-264V +/- 10% Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Laser class 1 Type: LDM 500-60 Lascon controller LPC03 The LPC03 has the processing power of a complete PC in a very small space. Instead of a hard drive, a removable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is therefore ideally suited for tasks in the field of measurement, control and regulation in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also provides space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180 mm Drives: none Storage medium: removable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212 mm x 80 mm x 250 mm (height x width x depth) Protection class: Front: IP40 Environment: 15°C - 40°C Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: new, HAHN-Automation Type: BDE11154003 Resistance welding system The system is designed for the automated resistance welding of the following components: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any other use of the system than that described above is not intended and is therefore not permitted! Tsdpozd Rmgofx Airsd System layout Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (l x w) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Controller: ST-T13V2.0 Power supply: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction system TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Condition: unused, machine has never been used in production Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Desktop Metal Tsdpjzd Tllsfx Airjd Desktop Metal 3D Printer Complete System 3D Metal Printer Studio System from Desktop Metal Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Includes: Bound Metal Deposition (BMD) technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: In contrast to laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods – similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing, and enables new features such as the use of closed-cell fillings for lightweight strength. Desktop Metal Studio Debinder (Delamination machine) Fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling mean that no refilling is required between cycles. Desktop Metal Studio Sinter Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305x205x205 mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles, tailored to each design and material, ensure uniform heating and cooling without the residual stresses that occur in laser-based systems. Condition: used Scope of delivery: (See image) (Changes and errors in technical data, information is subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Iridex Type: IRIDEX OcuLight TX Iridex Laser Systems OcuLight TX IRIDEX OcuLight TX Green 2.5 W 532 nm laser system, main console including foot pedal, key, and cables. The OcuLight TX solid-state laser systems emit true green continuous-wave laser light (532 nm) for ophthalmological applications. The OcuLight TX and GLx models are also indicated for otolaryngological applications. Improper use of the laser system can result in undesirable side effects. OcuLight TX Ophthalmology: Retinal photocoagulation Laser trabeculoplasty Iridotomy Iridoplasty Otolaryngology: Stapedectomy Stapedotomy IRIDEX OcuLight TX Green 532 nm Laser Excellent efficiency with a powerful 2500 mW of laser energy provides pulse durations and pulse intervals from 10 to 3000 ms. Offers TrueCW laser pulses for maximum control and precision. Flexible range of delivery devices and a wide selection of handpieces for different surgical procedures. Optional remote control and wireless foot switch to reduce clutter and improve ergonomics and control. Quiet operation eliminates distractions. The lightweight, portable design is easily transported between treatment rooms and offices. IRIDEX OcuLight TX Green 532 nm Laser Green treatment laser: 532 nm Target laser: nominally 632 nm Cooling: On-demand whisper fan 10–3000 ms exposure duration and repetition interval Todszd Ut Rjpfx Aired Compatible with EndoProbe, LIO, OtoProbe, and SLA Power output: EndoProbe 0–2000 mW, LIO 0–2000 mW, OtoProbe 0–2500 mW, SLA 0–1800 mW Weight: 6.4 kg Length: 15 mm Width: 30 mm Height: 30 mm Condition: used Scope of supply: (See picture) (Subject to changes and errors in technical data, information provided is without guarantee!) We will be happy to answer any further questions you may have by telephone.

Condition: used, EOL Type: EOL EMP 242 Tsdpjzd Uuzofx Aired Active cooling system Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Bosch Type: XR31-3 Description: Delta pick and place robot Manufacturer: Bosch Product type: Sigpack Systems XR31-3 Todpfx Aiozdrzrsrod Designation: Delta pick and place Year of manufacture: 2008 Pads/cycle (min): 185 Max. acceleration (g): 0.455 Cycle time (s): 0.32 Working area (mm): 48 x 9.2 Maintenance rate: None Assembly time (h): 2.5 Scope of supply: 1 x Delta robot XR 31-3 Manz operating panel pendant P51 1 x Rotary gripper Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, TOX Type: TZ-VSN TOX – Full-Punch Riveting System The full-punch rivet initially separates all joining partners and then pushes the punched-out section out of the joining point. With its innovative technology for full-punch rivets, TOX PRESSOTECHNIK, the specialist for sheet metal joining, is expanding its range of products and services to include a future-oriented process. Full-punch riveting offers an additional mechanical sheet metal connection that is of great importance for lightweight construction and the joining of hybrid parts and assemblies. The rivet feeders, tongs, and tool holders are also designed to be so universal that full-punch rivets with diameters of 4.0 mm and lengths between 3.3 and 8.1 mm, as well as full-punch rivets with diameters of 5.0 mm and lengths between 3.9 and 9.0 mm, can be processed flexibly with both TOX hand tongs and TOX robot tongs. Press force: 55 kN Total stroke: 140 mm Rivet type: Diameter 5 x 4.6 Connection values Power: 3.4 kW Mains connection: 400/15/50-60 V/A/Hz Speed: 200 mm/s Mains type: 3P+N+PE Control voltage: 24 V DC Pre-fuse: 25 A Condition: used Tsdezdtffjpfx Airod Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Eos EOSINT P 380 Eos EOSINT plastic laser sintering system P380 The following items are included with the EOS P380 system: Build volume container Powder container Overflow container Cooler: Termo TEK thermochiller, type: 802-18644-3 Unpacking stamp Removal trolley 3DM 8-zone process chamber heater, 250°C Each zone can be set individually, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Fuse rating 32 A MAX. laser power 100 W Laser class (open) 4 Laser class (closed) 1 Weight 850 kg Condition: used Scope of delivery: (See image) Todpfxjzdywzo Aired (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: new, DBK-1250 Rotary Screen – for processing large volumes of waste (35 m³/h) Robust structure designed for continuous, heavy-duty operation; features a continuously adjustable feeding unit. Technical Specifications Type: Rotary Screen – DBK-1250 Power requirement: 14 kW/A Supply voltage: 380 V / 50 Hz Rotation motor: 2.2 kW Internal conveyor motor: 1.1 kW Discharge conveyor motor: 1 kW Screen cleaning motor: 1 kW Loading conveyor motor: 1.1 kW Hydraulic unit motor: 1.1 kW Features and Performance: Weight (ready for operation): 3,450 kg Length: 6,575 mm Width (transport): 2,510 mm Width (ready for operation): 5,855 mm Height: 2,470 mm Weight: 3,400 kg Fuel tank capacity: 50 L Rotary drum dimensions: 1.2 × 4 m Rotary drum speed: 0–0.5 rpm Mesh size: standard 20 × 20 mm Customizable upon request Hopper capacity (total): 1.8 m³ Loading conveyor width: 620 mm Loading conveyor speed: 5–10 m/min. Discharge speed (below grate): 1 m/s Discharge speed (above grate): 0.63 m/s Tedpfjzka Duox Airsd Discharge belt width: 500 mm Max. speed: 3 km/h Max. feed material size: 200 × 200 mm Processed material (output): 0–20 mm Capacity: 0–35 m³/h

Condition: used, first registration: 01/2010, color: other, We are a family business that specializes in used trucks. We mainly do MAN trucks. Tedpfx Aey R Nu Soirod We are always looking for - good used trucks (preferably MAN) - Loading cranes (all brands) - Container systems / container hook systems (all brands) Contact us for a fair price proposal. Cevoman bvba. Lenskensdijk 5 2200 Herentals Belgium

Condition: excellent (used), Year of construction: 2005, 380 USED Miwe Athlet loading and unloading system. TECHNICAL DATA: - year of production: 2005 EQUIPMENT: - 4 trolleys with belts for proofing and loading bread Todpfx Aoy S Da Eoirod The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport of the set. The price is a net price per set. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, batch oven, shelf oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: new, 1 brand new universal milling head in standard or extended version for retrofitting to conventional, NC, or CNC milling machines or drilling machines of any type, system "HURON", swiveling over 2 levels, every angle adjustable Mounting: ISO 40 Overhang: approx. 360 mm Tjdpfx Aiedbny Esred Designed drive power: 10 HP Max. speed: 1,800 rpm Weight in standard version: approx. 82 kg Accessories / Special Features: • Manual tool clamping • The main spindle and all shafts and engagements are made of case-hardened and tempered chrome-nickel steel • 2 axes that can rotate relative to each other, allowing every setting angle! System „HURON“ • Tapered engagements are ground according to the „KLINGELNBERG“ system • The roller bearings of the main spindle consist of tapered high-precision rollers • 1 tool clamping screw Delivery time: approx. 12-14 weeks after order receipt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, Please choose the desired size: new, galvanized: Depth: 305,381,457,610,762,914 width: 610,762,915,991,1219 Special load: 100-250 kg/Shelf Metric scaling: new, galvanized Depth: 300,400,500,600,700,800 Width: 800,1000,1200 Special load: 120-250 kg/shelv Stand size: new, galvanized 2 m, 2.5 m, 3 m, 4 m Tsdpfxoduz Sqj Airsd Used, RAL 7042: 610 * 915 mm For larger purchases, we offer a discount. Ask our price for Transport cost. We are dealing with rebuying, selling, assembling the shelves. Here you can find pallet racks, cantilever racks etc.

Year of construction: 2007, condition: good (used), Laboratory fume hood, fume hood, extraction cabinet, extraction fume hoods, fume hood system for pharmacies, chemical and medical applications, extraction system, filter system -Extraction: aggressive, chemical gases -Internal dimensions: 540/850/H900 mm Tsdjb Uhnqjpfx Airsd -Stainless steel version -Glass door front -With Camfit filter cartridge -Connection: 0.085 kW -Suction type: EB 225 -with extractor hood -Dimensions: 675/900/H1200 mm -Weight: 100 kg

Condition: used, The Robatech Roba 40 nozzle glue system is a specialized adhesive application system designed for precise and efficient gluing operations. Manufactured by Robatech, this model is located in Germany, with pricing available upon request. The system is equipped with a 40 nozzle configuration, ensuring accurate and consistent adhesive application for various industrial and manufacturing needs. Todpfovphzijx Airjd Format: Equipment: 40 nozzles for consistent adhesive application

Condition: used, Year of construction: 2008, Year of manufacture: 2008 12 motors of 15kW Disassembled into 6 parts: Part 1: 2x Upper part with motors 4000kg Part 2: 2x Intermediate part with filter bags 4000kg Part 3: 2x Lower part with legs 2000kg Remainder: Return lines and 1x switch cabinet. Dismantling takes place on Extraction is loaded onto the truck. - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 8011510B - Suitable for material: Wood dust - Type of extraction: Underpressure installation - Capacity [m³/h]: 80000 - Nominal airflow [m/s]: 22 - Negative pressure [Pa]: 3200 - Main fan [pcs]: 12 - Main fan power [kW]: 15.0 - Number of filter bags [pcs]: 384 - Filter length [mm]: 2500 - Filter diameter [mm]: 230 - Filter surface area [m²]: 694 - Options: Fire suppression system, Control cabinet Financial information Tsdpfswiwpzjx Airjd VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: reconditioned (used), functionality: fully functional, Completely renovated Bruks BS 3 wood chip screen including stand Tjdowiw Tmjpfx Airsd

Condition: used, Complete system Dematic 84180 mm order picking system with empty crates accumulating roller conveyor with flow racks. RA1968 Complete line consisting of: Order picking with racks and flow-through infeed Passage Outgoing goods packing Shipping Order picking: Length: 84180 mm Tedpfx Aijk Abnvored Frame width: 500mm Roll width: 440mm Undriven roller conveyor on both sides Two accumulation roller conveyors for empty and full boxes Roller conveyors are equipped with plates for pushing over the crates Pallet racks with flow inserts and pallet flow Flow racks with adjustable widths Passage: Consisting of vertical conveyors, incline and decline belts Shipping: Loops for packing and empty boxes 33 m loop for full crates 20 m loop for empty crates Overfeed and passage to connect loops with each other further transport with ascending belt to the stretcher several stretchers at outgoing goods For a customization, simply get in touch with us. Just contact us by phone or mail or visit our website We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Fiber laser, fiber laser cutting system with flat bed and tube laser Laser cutting machine, laser cutting system, laser machine Manufacturer: DURMA Type: HD-F III 3015 III BH-IPG 2kW Serial No.: 822817712 Year of manufacture: 2017 with IPG laser source SIEMENS SL 840D + CAD software + nesting software Working area: 3000 x 1500 mm Tube cutting device: up to Ø 400 mm Laser power: 2000 watts (fiber laser) Output power: 0.2..2 kW Wavelength: 1070..1080 nm IPG power consumption: 6.4 kW/hour - Polarization random - Collimating focal length FC 100 mm - Focusing focal length FF 150 mm - Fiber diameter in single mode 50, 100, 200, 300 µm - Max. power consumption 42 kW - Power consumption machine 20 kW - Power consumption filter 4 kW - Power consumption cooler 10+1 kW - Power consumption resonator 7 kW Mild steel sheet thickness max. 12 mm - Stainless steel sheet thickness max. 6 mm - Aluminum sheet thickness max. 6 mm - Copper sheet thickness max. 3 mm - Brass sheet thickness max. 6 mm Working area X-axis 3060 mm Working area Y-axis 1530 mm Working area Z-axis 160 mm Sheet size max. 3048 x 1524 mm Sheet weight max. 200 kg/m² - IPG fiber laser resonator (see separate document) - Water cooling unit for laser source and cutting head (see separate document) - Under-table extraction and extraction filter system (see separate document) - with 2-position shuttle table Tsdpokdnv Tofx Airod - Tube laser with 4-jaw chuck and large spindle bore next to the flat bed - Guides for tube laser on linear guides - with CAD software - with nesting software - with tube laser software very good condition

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: AN98A21604, temperature: 232 °C, I am offering for sale a Nordson hot melt adhesive system in good condition. The device has been checked for function and is fully functional. Tjdpfx Aierq D Averjd The technical data can be seen in the pictures.