Used Screw Compactor for sale (5,757)

Condition: used, DOUBLE AUGER, SCREW CONVEYOR, 7.20 M Length: 7.20 m Gsdpfxjrn T H So Aatebt Ø auger: 350 mm Weight: approx. 650 kg Material: Housing / cover > galvanized steel / screw > mild steel

Condition: used, Manufacturer: REWA Type: Solid body auger, with bearings on both sides, Other: without cover, WITHOUT motor and gearbox, with solids pusher Gbedpfx Aajrk Etustet Length: 8.00 m Ø screw: 300 mm

Condition: used, Machine Screw conveyor, Screw conveyor, Solid screw conveyor Manufacturer ASKANIA Type: TSF 315 Length: 3,80 m Ø screw: 300 mm Year of construction: 1996 Speed: motor 1400 1/min / gearbox 53 1/min Motor power consumption: 2.2 kW Gear oil: 1.8 l Material: Housing > galvanized steel / worm > mild steel / Gjdpfx Aaern Slgetobt Cover: Stainless steel, half cover

Condition: used, Machine: Screw conveyor, hollow screw Gbsdpsrn T R Iefx Aatet Length: 6.30 m Ø auger: inner auger 170 mm, outer auger 460 mm

Condition: used, Hollow body worm: Steel with bearings on both sides, Diameter: 380 mm Housing / cover: galvanized steel Motor: 7.5 kW 1430 r/min Gbsdpfx Aasrt S T Njtjt Length: 5.85 m

Condition: used, Machine: Screw conveyor, Screw conveyor Type: Askania Maschinenbau GmbH, screw conveyor Model: TSF 315, No. 197 Year of construction: 1999 Mass: 350 kg Gbjdorn U H Hopfx Aatet Rated voltage: 230/400 V/ Connected load: 4 KW Length: 9.40 m Ø auger: 250 mm Material: Steel auger/stainless steel trough

Condition: used, Assorted lot of progressing cavity pumps from various manufacturers (Netzsch, Bornemann, Seepex, etc.), mostly in working condition – but some are not. These pumps were removed from service during ongoing operations. To be sold only as a lot. Gsdpfx Aajilu Uqstobt

Condition: used, Machine: Discharge Screw, Screw Conveyor, TSF 315 Solid Body Screw, second-hand Gbjdpfx Asrl Sv Ssatet Manufacturer: Askania Mass: 495 kg Year of construction: 1996 Length: 5,20 m Ø auger: 350 mm Weight: 435 kg Speed: motor 1400 rpm / gearbox 53 rpm Engine power consumption: 2.2 kW Gear oil: 1.8 l Material: Housing > galvanized steel, auger > mild steel / cover > stainless steel

Condition: used, Machine: screw conveyor, screw conveyor, hollow screw conveyor Length: 8.10 m Ø screw: 500 mm Manufacturer: IEM Fördertechnik Gbjdpfjrn T Ursx Aatjt Type: Solid body screw conveyor, supported on both sides, without motor

Condition: used, Solid body auger: Steel with bearings on both sides Diameter: 330 mm Gbsdpfx Aaert T Alotst Housing: galvanized steel and painted sheet metal (hopper) Manufacturer: ROEDER Type: TS 315 Year of construction: 1992 Gearbox: SK 22-100 L/4 , 59 1/min max. 302 Nm Length: 3,40 m

Condition: good (used), Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, Gsdpocxuqcsfx Aatsbt -Adjustment via trapezoidal thread -Adjustment range: 295 - 530 mm -Quantity: 1 piece -Weight: 9 kg

Condition: like new (used), Parts shown by hand not come. Godpfjgvl Dnjx Aatobt

Year of construction: 2014, operating hours: 30,000 h, condition: used, functionality: fully functional, machine/vehicle number: 20526471, Laboratory Twin Screw Extruder – Coperion ZSK 26 Mc18 (40 L/D) with a 26 mm screw diameter Featuring all the characteristics of the ZSK Mc18 series, this extruder is ideal for formulation development and compound sampling, as well as for manufacturing small compound batches of up to approximately 180 kg/h. Compared to the previous model ZSK 26 Mc, the new laboratory extruder enables throughput increases of up to 100%, owing to the torque having been increased to 15 Nm/cm³. The extruder is mobile and space-saving as the control cabinet is integrated into the machine’s base frame. Heating and cooling systems are installed and operational (plug & play). Machine No.: 20526471 Year of manufacture: 2012 Operating hours: approx. 30,000 h Condition: Used, in operation Technical specifications: Extruder type: Twin screw extruder Model: ZSK 26 Mc18 Process length: 40 L/D Drive power: 36.9 kW Power supply: 3 × 400 V (−10 % / +6 %), 50 Hz ±2 % Barrel configuration: E-0-0-S-0-0-1-0-V-0 Output: approx. 150–200 kg/h, depending on formulation, raw material, and required product quality Applications: Highly filled compounds, masterbatch applications Suitable for processing: LLDPE, LDPE, HDPE, PP, PPR, PS, ABS, PET, and biopolymers Scope of delivery Gravimetric feeding system: - K-Tron gravimetric feeders - 1 × pellet feeder - 1 × powder feeder (twin screw design) Side feeding / degassing: - 1 × side feeder ZS-B25 - 1 × vacuum side degassing unit ZS-EG25 Vacuum system: Busch vacuum pump Plastex MI 0120 B 222 CNX6, specifically designed for PET applications. Please note: Vacuum pump is not included. Process monitoring: - Melt pressure sensor system - Melt temperature sensor system Gbodpoyhd Dbofx Aatjt - PLC integration Pelletizing system (strand pelletizing): - Air dryer unit not included - Strand pelletizer SP50 - Water bath Peripheral equipment: - Bag emptying station for pellets - Conveying system to the feeders Spare parts: - Spare parts included, second screw set.

Condition: like new (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, total length: 2,000 mm, total width: 800 mm, total height: 1,850 mm, power: 15 kW (20.39 HP), volume flow: 147.6 m³/h, operating pressure: 8 bar, noise level: 73 dB, Equipment: refrigerant dryer, We are offering this Champion FM15 screw compressor in like-new condition, manufactured in 2020. Manufacturer: Champion Model: FM15 Year of manufacture: 2020 Less than 500 operating hours. Engine power: 15 kW Air flow at 8 bar: 2460 liters/minute Noise level: 73 dB(A) Gedpfxjzwxnle Aatjbt Pressure tank: 500 l Dimensions: 2000x800x1850 mm DRYTEC MDD-100 air dryer with approximately 1000 operating hours. If you have any further questions or require more information, please feel free to send us a message or call us.

Condition: used, feed pressure / bar liter capacity / l Air consumption / m³/h For sale is a powerful ALUP Solo 18 screw compressor Gedpowz Ry Djfx Aatsbt with 18.5 kW motor power, ideal for industrial use. The compressor is offered including a high-quality DRYPOINT RA refrigeration dryer from Kaeser - for reliable and efficient compressed air drying without moisture problems. The ALUP Solo 18 is a compact, oil-injected screw compressor, which is suitable for medium to large operations. It is characterised by its energy efficiency, low noise levels and high reliability Technical specifications Motor power: 18.5 kW Max. Operating pressure: 13 bar Delivery rate: up to 200 m³/h Low-noise and energy-efficient Including DRYPOINT RA refrigerant dryer for dry, clean compressed air Including compressed air tank for pressure stabilisation and condensate management Perfectly suited for demanding industrial applications Technical data taken from publicly available sources

Condition: used, Year of construction: 2017, feed pressure / bar Gbodpfxoxy S H Ts Aatjt liter capacity / l Air consumption / m³/h

Condition: excellent (used), Year of construction: 2002, PROD. KAESER TYPE CSD102T / 100304.0 S/N 1049 YEAR 2002 POWER (kW) 55 OUTPUT (m3/min) 10.1 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no Godpszwnykefx Aatsbt BUILT-IN DRYER yes HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 2 NEW/USED USED

Condition: used, Year of construction: 2000, Technical details: feed pressure: 10 bar airflow volume: 1,06 m³/min Motor RPM: 3920 1/min total power requirement: 7,5 kW electrics - voltage/frequency: 400/50 V/Hz machine weight approx.: 250 kg dimensions L x W x H: 1,5 x 2 x 2 m Professional, soundproofed compressor with the lowest noise level in its class, designed to eliminate noise problems in working environments. The powerful 5.5 hp pump unit guarantees maximum efficiency and reliability. It is also equipped with an additional intake silencer, a belt tensioning device that regulates belt tension and facilitates replacement, and a forced ventilation fan for better cooling. The control panel with star-delta start control is positioned for easy reading and operation. The opening front door allows for easy maintenance. Gbjdpfx Aaozuvwxotst *

Condition: used, Manufacturer : Clextral Model : Evolum 32 Type: Twin-screw extruder Previous application: Food processing – Cooking and extrusion Frame sandblasted and repainted by the manufacturer Assembly comprising screws, barrel, shaft, coupling and bearing housing: brand new, original Clextral parts. To be assembled Refurbished second-hand Leroy Sommer 23.8 kW DC motor. To be assembled DC motor: 23.78 kW Length of screw/barrel: 640 mm Screw elements: nominal diameter 32 mm. Gbedpfsy Abclex Aatet L/D : 20 Peripheral equipment not included but available on request: Granulator, dosing unit, water pump and new electrical cabinet. (Their integration may be subject to a feasibility study and a supplementary quotation.)

Condition: used, Year of construction: 1993, Capper for applying screw caps to glass bottles. Additional title: Screw-capping machine with 4 capping heads Capacity approx.: 9000 bottles/h Gbodsztzbgspfx Aatst Length: 1,9 m Width: 0,9 m Height: 3,05 m Weight: 500 kg Formats: 0,5 l euro Features: 4 capper station

Condition: like new (used), Year of construction: 2006, operating hours: 4,545 h, functionality: fully functional, screw diameter: 114 mm, overall weight: 7,500 kg, A KMD114-32 P in like-new condition is for sale. This extruder comes from a technical institute and is therefore from a single owner. The operating hours are original and can be verified. The screw and cylinder are in like-new condition. The gearbox runs very smoothly. Includes adapter, hopper, and loading onto a truck. Technical specifications: - Year of manufacture: 2006 - Screw for profile: 684 2929 / 8880 - Internal screw temperature control, welded tips Gbedjzxhfijpfx Aatot - Maximum screw speed = 17 min-1 - Maximum dosing speed = 260 min-1 - 5 cylinder zones, 15 tool zones + 4 lip heaters, melt temperature, melt pressure - C5 control system with puller control, language E/D An inspection in 84405 Dorfen is possible at any time. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, DIESEL ATLAS COPCO XAS 67 Compressor – Serviced! The compressor is registered in Poland. Technical specifications: Gjdpfxjzwmlrs Aatjbt Capacity: 3.60 m3/min; Operating pressure: 7 Bar; Year of manufacture: 2015; Engine: KUBOTA Operating hours: 1847h! The compressor is fully functional, ready for work, and comes with a warranty. Net price: 32,500 PLN Gross price: 39,975 PLN Below is a link to a video demonstrating the machine in operation.

Year of construction: 2026, condition: new, functionality: fully functional, Styrofoam press / auger compactor for EPS and XPS For sale is a compact system for shredding and compacting EPS (Styrofoam®) and XPS. It is ideally suited for EPS packaging, molded parts, as well as production and cutting waste. The Styrofoam shredder is located in the upper section of the system. This shredder breaks down the fed material and then transfers it to the lower section of the system. There, the shredded material is compacted using a compression auger and discharged as a compacted material strand. The significant volume reduction allows for a considerable reduction in storage, transportation, and disposal costs. The compacted material can be collected in a space-saving manner and fed for further processing or recycling. The system is robustly constructed and has separate drives for the shredder and compression auger. At the customer's request, we can carry out various modifications and adjustments, for example: Adjustment or replacement of the mold Gbjdpfxszuy Syj Aatst Changes to the material inlet or outlet Adjustments to customer-specific production conditions Further mechanical or electrical modifications by agreement If you have any questions about the system, possible adjustments, or your specific application, we are always happy to assist you.

Condition: excellent (used), Mitutoyo Frame Micrometer (28662) 103-155 OM-475, measuring range 450 - 475 mm Gbsdpsw Suwgjfx Aatst

Condition: ready for operation (used), Year of construction: 1983, BOLTMAKER SACMA SP.17 – 4 dies Fully functional with thread rolling machine up to M6. Incoterm: EXW The machine operates without any issues. Technical specifications below: Number of dies: 4 Heading tonnage: 480 kN Max. cutoff diameter at 500N/mm²: 8 mm Max. cutoff length: 65 mm Kickout stroke die max.: 45 mm Kickout stroke punch max.: 14 mm Max. thread 8.8/12.9: M6 Speed (pcs. per minute): 350 Main motor power: 26 kW Die diameter: 45 mm Die length: 70 mm Fixed punch diameter: 38 mm Fixed punch length: 85 mm Net weight: 10,000 kg Gbodpfx Aowvt Hvoatst Gross weight: 11,900 kg The machine is available for any inspection.