Used Screw Type Compressor for sale (39,699)

Condition: ready for operation (used), Year of construction: 1998, operating hours: 28,973 h, functionality: fully functional, overall weight: 2,750 kg, total length: 2,800 mm, total width: 1,150 mm, total height: 1,770 mm, power: 132 kW (179.47 HP), volume flow: 1,630 m³/h, type of cooling: water, input voltage: 400 V, input frequency: 50 Hz, operating temperature: 201 °C, pressure: 2.75 bar, rotational speed (max.): 12,874 rpm, type of input current: three-phase, Equipment: compressor, documentation/manual, type plate available, 4 Aerzen VM 30 Screw Compressors Previously used for pneumatic unloading of railway wagons. Manufacturer: Aerzen Model: VM 30 Volume flow rate: 27.17 m³/h (1630.2 m³/min) Pressure increase: 2.75 bar Compressor speed: 12,874 rpm Shaft power: 105 kW Motor power: 132 kW Final temperature: 201 °C The compressed air is cooled with water via a shell-and-tube heat exchanger. Year of manufacture: 1998 Dimensions: Length: 2,800 mm Width: 1,150 mm Height: 1,770 mm Weight: approx. 2,750 kg Operating hours: Compressor 1: 28,109 hours Compressor 2: 28,222 hours Bsdpjrkpp Hjfx Amnjli Compressor 4: 28,973 hours Regular servicing was carried out by an authorized service company!! Units have not been in operation since 2019. Since then, they have been stored in a dry, heated location.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 42,000 h, functionality: fully functional, overall weight: 3,315 kg, total length: 3,200 mm, total width: 1,630 mm, total height: 1,960 mm, motor manufacturer: Siemens, power: 236 kW (320.87 HP), volume flow: 3,013 m³/h, operating pressure: 4 bar, noise level: 77 dB, type of cooling: water, Equipment: documentation/manual, type plate available, 1 unit Low-Pressure Screw Compressor Manufacturer: Atlas Copco Model: ZE 4 VSD Year of manufacture: 2013 Volume flow: 3,013 m³/h (50.2 m³/min) Operating pressure: 4 bar Operating hours: approx. 42,000 hours Shaft power: 225 kW Drive power: 236 kW Discharge temperature with aftercooler: 40°C Discharge temperature without aftercooler: 244°C Compressor speed: 3,630 rpm Speed control: with integrated frequency converter Cooling: Water-cooled with stainless steel shell-and-tube heat exchanger FUNKE 1.4571 Electric motor: Siemens 1LG6 316-4ZZ91-Z Dimensions Length: 3,200 mm Width: 1,630 mm Height: 1,960 mm Weight: 3,315 kg Also available: Bsdoywr Tkjpfx Amnoli Cyclone Afterseparator Manufacturer: BZ Zyklone Model: 175 (stainless steel) Condensate drain Bekomat Shell-and-Tube Heat Exchanger Manufacturer: Funke Model: A100 805-6-1Pass Material: Stainless steel 2x Rubber Expansion Joints 1x Intermediate Flap Valve DN 150 with Auma Actuator SG 05.1 F07 1x Cooling Water Control Valve Samson 3274 DN 50 PN 16 1x Steel Pipe DN 150 with 2x 90° bends

Condition: used, Year of construction: 1998, operating hours: 80,000 h, functionality: fully functional, overall weight: 6,550 kg, total length: 3,700 mm, total width: 2,120 mm, total height: 2,400 mm, motor manufacturer: Siemens, power: 315 kW (428.28 HP), volume flow: 46 m³/h, operating pressure: 10 bar, noise level: 72 dB, type of cooling: water, Equipment: documentation/manual, type plate available, 2 screw compressors with special voltage of 6000 Volts Manufacturer: Atlas Copco Model: ZR 315-10-50/E Operating pressure: 10 bar Volume flow: 46 m³/min Year of manufacture: 1998 Operating hours: approx. 80,000 hours Cooling: water-cooled Motor manufacturer: Siemens Power: 315 kW Speed: 1482 rpm !!! Voltage: 6000 Volts !!! Dimensions: Length: 3700 mm Width: 2120 mm Bsdpfx Ameywcr Rsnsli Height: 2400 mm Weight: 6550 kg

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Bedpfsyb Sdiex Amneli Made in Germany Good working condition

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Blodpfxsyy U Shj Amnji Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: new, AGRE ALUP SCK 10-10 270+ Belt-driven. Space-saving. Cost-effective. Easy to operate. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Refrigerant dryer installed. Sound-insulated screw compressor with belt drive on a 270 l compressed air tank, with integrated refrigerant dryer, integrated cyclone separator, electronic condensate drain, and C55 graphic control. Features in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled Drive: Efficient IE3 motor, belt drive Control: Fixed speed Blsdpfxoixt H Nj Amnoi Controller: Aircontrol 5.0 Refrigerant dryer: Mounted, refrigerant R513A Filtration: Incl. cyclone separator Tank: Horizontal, painted, manufactured according to AD2000 Performance data: Volume flow at operating pressure 9.5 bar = 1.06 m³/min Operating pressure min. / max. 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load 10.2 kW Rated motor power; IP55 7.5 kW Oil quantity 4 liters Dimensions and weight: L x W x H = 1530 x 662 x 1531 mm Weight: 310 kg Compressed air outlet: G 1/2'' Compressed air tank capacity: 270 liters

Condition: new, Screw compressor AGRE Model Sonetteo 7.5+ 10 Compact screw compressor unit including refrigerant dryer and compressed air tank, 270 liters. Belt-driven. Space-saving. Economical. Easy operation thanks to the Infologic² Basic control system. Efficient compression stage. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Refrigerant dryer installed. Detailed features: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Control system: Infologic² Basic control unit Refrigerant dryer: Installed, refrigerant R513A Tank: 270 liters, horizontal, painted, 11 bar Motor power: 5.5 kW Pressure: 10 bar Delivery rate: 780 liters/min Including time-controlled condensate drain Bsdpfxehun Tzs Amnoli Dimensions L x W x H = 1500 x 1350 x 600 mm

Condition: as good as new (ex-display), Compressor, rotary screw compressor, high pressure gas compressor, industrial refrigeration compressor, Howden MK1S,Used machine Manufacturer: Howden Compressors Limited Type: MK1S WRViHS/365193/58/028 Serial No: N12533 -max. inlet pressure: 2.9 bar g -max. working pressure (outlet): 35.5 bar g -casing design pressure: 42.0 bar g -hydraulic test pressure: 63.0 bar g -max. continuous speed: 2970 RPM -setting: variable volume ratio (Vi setting) Bsdpjy Snk Uofx Amnsli -place of manufacture: Glasgow, G52 1BE

Condition: used, Bega Screw Compressor 15kW 10 bar, Refrigerant Dryer, Compressed Air System, Compressor Station, Air Supply System, Used Machine Compressor Manufacturer: Bega Type: MSK SD15/10 /U3 Year of manufacture: 2017 Weight: 500 kg Overall dimensions: 1300 x 950 x 1150 mm Bljdpjzbqn Tefx Amnoi Flow rate: 2.1 m³/min (2100 l/min) Maximum pressure: 10 bar Motor power: 15 kW Maximum speed: 2940 rpm Country of origin: Germany Dryer Manufacturer: BEGA Kompresszor Kft. (Friulair S.r.l.) Type: ACT23/AC Year of manufacture: May 2017 Overall dimensions: 500 x 420 x 950 mm Nominal capacity (Flow rate): 2300 l/min Maximum operating pressure: 14 bar Voltage / Frequency: 230 V / 50 Hz Power output / Rated current: 0.46 kW / 2.8 A Refrigerant type / mass: R134a / 0.35 kg Country of origin: Italy Air Receiver Tank Manufacturer: Huch GmbH Behälterbau (Neuruppin, Germany) Type / Serial No. (Herstell-Nr.): 103455 Year of manufacture: 2002 Overall dimensions: 2000 x 615 mm Nominal capacity: 500 Liters Max. allowable operating pressure: 11 bar Max. allowable operating temperature: -10 to +50 °C Standard / Certification: EN 286 Teil 1, CE 02-0035 Country of origin: Germany

Condition: ready for operation (used), Mahle Screw Compressor, Screw Compressor, Compressor; Mahle MSK D37, 37 kW Screw Compressor, Used Machine Bjdowqbzdjpfx Amnsli Manufacturer: Mahle Type: MSK D37 Year: 1995 Dimensions: 1480 x 845 x 1010 mm Operating Hours: 48,600 Maximum Operating Pressure: 10 Bar Power: 37 kW Delivery Quantity: 4900 l/min; 4.9 m3/h

Condition: good (used), Year of construction: 1988, Manufacturer: Atlas Copco Bodohyglaepfx Amneli Type: GA 230 Max. final pressure: 13 bar Free air delivery: 50 l/sec Motor power: 30 kW Max. speed: 1500 r/min

Condition: excellent (used), Year of construction: 2013, operating hours: 29,558 h, functionality: fully functional, Screw compressor, Atlas Copco GA55FF Dryer integrated 55 kW Bljdpfx Amozil Iisnji 9.75 bar 8.94 m3/min Year of manufacture: 2013 Operating hours: 29,558

Year of construction: 2026, condition: used, Tank capacity: 270 l Maximum flow rate: 0.92 m³/h Motor power: 5.5 kW Refrigerant dryer: Yes Bsdpfx Aoyq R Apomneli

Year of construction: 2010, condition: used, Used machine Used screw compressor from Schneider, type AIRMASTER AM 7-10, with refrigerated air dryer Schneider DK 985 ECO and compressed air tank. Year of manufacture: 2010 Technical data compressor: Volume flow: 930 l/min Final compression pressure: 10 bar Motor power: 7.5 kW Technical data refrigerated air dryer: Air volume flow: 985 l/min Bsdpfx Amozh Rt Ioneli Max. operating pressure: 16 bar Refrigerant: R134a Air connection: 3/4 inch Power consumption: 0.3 kW Technical data compressed air tank: Tank volume: 270 l Max. operating pressure: 16.5 bar Availability: short notice Location: Flörsheim

Condition: repair required (used), Year of construction: 2007, functionality: not functional, Screw compressor Atlas Copco GA250FF Dryer integrated Bljdpfxszhu Nao Amnsi 250 kW 9.75 bar 37.80 m3/min Year of manufacture: 2007 Main motor defective Price: 9,000 EUR

Condition: used, Screw Compressor SCHNEIDER AM B7.5 10 – used – Bedpoy Dp Swjfx Amneli ----- Technical Specifications ----- Max. pressure: 10 bar Motor: 7.5 kW Air delivery at 10 bar: 1,000 l/min Weight: 250 kg Operating hours: 6,922 h Load hours: 2,083 h Year of manufacture: 2017

Condition: new, - Exhibition machine - For continuous air demand and intermittent operation Electronic control for reliability and efficiency. Increased flexibility thanks to two compressed air tanks High-quality and expandable equipment. Smooth and quiet running. Can also be used in intermittent intermittent operation. DUO KK equipment with refrigeration dryer and fine filter as pre-filter before the refrigeration dryer Condensate conditioner for oil-water separation Automatic condensate drain. ----- Technical data ----- Tank size: 2 x 100 liters, Effective delivery volume approx. 380 liters, Maximum pressure: 10 bar, Motor: 4.0 kW, Bledpsu R S A Dofx Amnei Speed: 2,880 rpm, Sound pressure level: 65 dB, Dimensions (LxWxH): 1,200 x 900 x 1,250 mm, Weight: 201 kg - new exhibition machine -

Condition: refurbished (used), Year of construction: 2006, power: 90 kW (122.37 HP), fuel type: electric, volume flow: 1,000 m³/h, pressure (max.): 7.5 bar, type of cooling: air, We offer this refurbished Atlas Copco GA90 rotary screw compressor, year 2006. Bsdpfxeyxy Dae Amneli The compressor was imported from Europe and has not been operated in Ukraine. Comprehensive repairs have been carried out, including replacement of the screw block bearings and gearbox (multiplier) bearings, shaft seal replacement and bushing, replacement of the flexible coupling for torque transmission, replacement of the electric motor bearings, as well as replacement of all filters and oil. A new inlet valve with a new solenoid valve has been fitted. The thermostatic valve has been overhauled with a new repair kit, as well as the minimum pressure valve, oil-stop valve, check valve with repair kits replaced, and the condensation drain valve has also been serviced. A new Elektronikon compressor control unit has been installed. The hydraulic hoses have been replaced and the oil system has been cleaned. Delivery across Europe can be arranged.

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, Hello, Blsdpfxezhux Ue Amnsi For sale: SCS 30-08A screw compressor. In good working order. Ready for use. The price stated in the advertisement is the net price, to which VAT must be added. The machine can be viewed in Starachowice, at 13 Kwiatkowskiego Street. Please contact us by phone between 7:00 AM and 3:00 PM.

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, Hello, For sale: a SCS 30-08A screw compressor. Blodozhux Ijpfx Amnji In working order. Ready for use. We have 3 units available. The price stated applies to 1 unit. The price listed in the advertisement is the net price, to which VAT must be added. The machine can be viewed in Starachowice, at 13 Kwiatkowskiego Street. Contact us by phone between 7:00 AM and 3:00 PM.

Year of construction: 2022, condition: used, Used machine Bodpfsxdplbox Amnoli Year of manufacture: 2022 Condition: like new, only a few operating hours, not used in production Equipment and technical data: - Compact screw compressor with variable speed control and innovative LOGIN control system - With tank and refrigerant dryer - Maximum pressure: 10 bar - Effective delivery rate: 1,050 l/min - Motor power: 7.5 kW - Noise level: 62 dB(A) - Connection: 1/2" - Tank volume: 270 liters (AD2000) - Frequency-controlled - Electronic control - Oil heat exchanger - Compressed air tank, internally and externally hot-dip galvanized - Drive transmission: direct coupling - Circuit: star-delta - AD 2000 compliant: yes Dimensions: 1,200 × 650 × 1,540 mm Weight: 295 kg Availability: short-term Location: Röllbach

Condition: excellent (used), Year of construction: 2014, PROD. ATLASCOPCO TYPE GA75 FF PLUS S/N API619181 YEAR 2014 POWER (kW) 75 CAPACITY (m3/min) 14.95 DISCHARGE PRESSURE (bar) 7.25 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no Bljdpfxjzicypo Amnei BUILT-IN DRYER yes, R410a 1.1 kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 2 1/2 NEW/USED USED

Condition: excellent (used), Year of construction: 2022, operating hours: 8,244 h, functionality: fully functional, overall weight: 445 kg, total length: 980 mm, total width: 1,975 mm, total height: 1,710 mm, power: 5.5 kW (7.48 HP), fuel type: electric, operating pressure: 10 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 45 °C, noise level: 68 dB, protection type (IP code): IP55, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Available for sale from our warehouse location: Bjdpfx Aezf Ihqsmnsli Albert-Proeller-Straße 9a, 86675 Buchdorf Service will be performed professionally on June 16, 2026. Manufacturer: BOGE Model: C 7 DR Year of manufacture: 2022 Type: Screw compressor, sound-insulated Configuration: • C7 = 5.5 kW screw compressor • R = mounted on a compressed air tank • D = integrated refrigerant dryer Compressor type: Oil-injected screw compressor Rated power: 5.5 kW Maximum pressure: 10 bar Effective delivery rate: 0.736 m³/min at 10 bar Voltage: 400 V / 50 Hz Drive: Direct drive with elastic coupling Control: Electronic BASIC control Dimensions (L × W × H): approx. 1975 × 980 × 1710 mm Weight: 445 kg (with tank & dryer) Tank volume: 500 l (C7R standard) Type: freestanding, under-mounted

Condition: excellent (used), 4 kW engine, year 1987, 8 bar, 0.526 m³/min. Dimensions: 70 x 60 cm, height 80 cm. Bodpfxezil Szs Amneli

Condition: excellent (used), Year of construction: 1991, overall weight: 1,000 kg, volume flow: 7.2 m³/h, operating pressure: 75 bar, input voltage: 400 V, ATLAS COPCO GA 45 screw compressor With desiccant dryer Bledpeukvvaefx Amnji 45 kW motor Capacity: 7.20 m3/min Pressure: 7.5 bar The compressor is in perfect working order.