Used Screw Tap for sale (6,440)

Condition: used, Year of construction: 1979, bar material dia. max. 50 mm keins ja Kjdeucgu Aepfx Abcolp

Condition: good (used), Year of construction: 2003, Offer 25508 High-table tapping and drilling machine with leadscrew Technical data: - Thread tapping capacity: M2 up to M10 - Threads per hour: up to 2400 - Drilling capacity in steel: 18 mm - Drill spindle mount: Morse taper 2 (MK2) - Drilling depth: 100 mm - Threading depth: 60 mm Klodpfx Aoygk Idobcop - Spindle to column distance: 215 mm - 4 drill spindle speeds: 320 – 1600 rpm - Table size: 350 x 290 mm - Spindle to table distance: approx. 150 – 520 mm - Cycle-controlled coolant spray system with pneumatic connection - Drive: 400 V / 0.55 kW - Space requirement: approx. W 580 x H 1430 x D 750 mm - Weight: approx. 150 kg

Condition: new, power: 2 kW (2.72 HP), *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!! Kedpfxeyut T So Abcslp

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete Kjdpfxjyb Sdij Abcslp YOM 1991 Made in Germany Good working condition

Condition: new, Hydraulic threading machine Easy Tap ETH 24 Thread diameter up to M 24 Speed 0 - 600 rpm thread M 5 - M 24 Working range 2050 Rmax. working height 920 mm table surface 900 x 700 mm oil capacity 100 l Motor power 3,0 kW Kledpfokhmgiox Abcop Weight:220 kg Equipment: Hydraulic threading machine Incl. machine base with clamping disk Mobile Hydr. manometer Infinitely variable speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Special accessories included / quick change inserts : M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Condition: new, Hydraulic tapping machine Easy Tap ETH 24 Thread diameter up to M 24 Kledstbawkspfx Abcsp Speed 0 - 600 rpm Thread M 5 - M 24 Working range 2050 Rmax. Working height 920 mm Table surface 900 x 700 mm Oil capacity 100 l Motor power 3.0 kW Weight: 220 kg Equipment: Hydraulic tapping machine Incl. machine base with clamping disk Mobile Hydr. pressure gauge Infinitely variable speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Special accessories included / quick-change inserts : M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Condition: used, Year of construction: 2009, Manufacturer: H&G Model: HG/SV 11 Weight: 1800 kg Klsdpfjx Hyfyjx Abcjp Engine power: 11 kW

Condition: new, Year of construction: 2023, operating hours: 300 h, functionality: fully functional, turning length: 2,880 mm, spindle motor power: 90,000 W, type of input current: three-phase, For sale: new compounding line with a real capacity of 300kg/h. The line includes hot and cold mixers, a twin-screw extruder (2 twin screw extruder) with two feeding points—at the start of the screw and from the side—suitable for high loading of dry substances. Features include a vacuum pump, hydraulic screen changer, vibro table, and storage silos for materials. The line can process powdered materials, hard materials, various grindings, mixtures, and granules of PP, PE, and PVC. It can produce high-quality masterbatch, fillers, and other products. Up to 85% dry matter content. Kedpfxex Uqyqj Abcelp The machine is practically brand new, only tested for a few hours. Control with frequency inverters. A set of spare parts, spare heaters, and spare screw segments is included. Possibility to test with your own materials.

Condition: good (used), Screw Conveyor Kedpfshfdvisx Abcslp Custom made conveyor Overall dimensions: 3500 x 900 x 2600 mm Screw dimensions: diam. 150 x 2700 mm

Year of construction: 1998, operating hours: 297 h, condition: ready for operation (used), functionality: fully functional, saw blade diameter: 200 mm, rotational speed (max.): 3,000 rpm, screw diameter: 35 mm, machine/vehicle number: E0195/10, No reserve price – guaranteed sale to the highest bidder! Single-screw extruder with only 297 operating hours, including cutoff saw and haul-off unit! Hussmann ES35 x 30D TECHNICAL DETAILS Screw diameter: 35 mm Length: 30D MACHINE DETAILS Motor power: 16 kW Operating hours: 297 h Cutoff Saw Kljdpfx Asyrmzqobcep TECHNICAL DETAILS Three-phase motor speed: 3,000 rpm Three-phase motor output: 0.55 kW Saw blade diameter: 200 mm Haul-off Unit TECHNICAL DETAILS Haul-off speed: 20/30/40/50/60 m/min Haul-off force: 11,700 / 7,800 / 5,800 / 4,700 / 3,900 N Contact length: 800 mm Max. belt width: 160 mm Max. profile height: 160 mm MACHINE DETAILS Drive power: 2 - 5.6 kW Weight: 800 kg EQUIPMENT Complete electrical and electronic control system with remote control box Digital speed display Ammeter 10-step helical potentiometer

Condition: good (used), Year of construction: 2008, operating hours: 1,408 h, machine/vehicle number: 89-4010241, USED AIRMAN 830CFM,150PSI AIR COMPRESSOR MODEL : PDSF830S SERIAL :89-4010241 YEAR : 2008 Kodpfxsyrb Hno Abcslp HOUR : 1408 AS SHOWN

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH spiral sand washers are reliable systems that offer high efficiency in separating and cleaning fine materials that need to be washed. These machines are designed to effectively clean gravel, sand, or crushed stone containing large amounts of clay, dust, and dirt. Thanks to their heavy-duty steel construction, they provide long-lasting performance even under harsh working conditions. Their durable body, wear-resistant structure, and easily replaceable spare parts minimize maintenance costs. Constmach spiral washers are manufactured with high-quality materials and superior engineering design, ensuring trouble-free operation in both stationary and mobile facilities. They adapt to different production needs with single or double shaft configuration options. Furthermore, the specially designed gearbox and replaceable rubber boots enable long-term, quiet, and efficient operation. Its simple assembly structure makes installation easy and allows for quick commissioning. Screw Washer Technical Specifications Model: CSW-50 Dimensions: Φ 500 x 5,000 Motor Power: 4 kW Capacity: 25 – 45 m³/hour Rotation Speed: 24 rpm Water Requirement: 25 – 45 m³/hour Weight: 2,800 kg Model: CSW-60 Dimensions: Φ 600 x 6,000 Motor Power: 2 x 5.5 kW Capacity: 40 – 75 m³/hour Rotation Speed: 20 rpm Water Requirement: 35 – 55 m³/hour Weight: 5,200 kg Model: CSW-75 Dimensions: Φ 750 x 7,500 Motor Power: 2 x 7.5 kW Capacity: 45 – 80 m³/hour Rotation Speed: 20 rpm Water Requirement: 40 – 60 m³/hour Weight: 5,800 kg Model: CSW-80 Dimensions: Φ 800 x 8,000 Motor Power: 2 x 11 kW Capacity: 50 – 90 m³/hour Rotation Speed: 20 rpm Water Requirement: 45 – 65 m³/hour Weight: 6,250 kg Why Choose a CONSTMACH Spiral Sand Washer? Constmach manufactures high-performance, low-maintenance, and durable machines with years of experience in the concrete and aggregate industry. Our helical sand washers combine quality with long-term usage assurance. Each of our European standard-manufactured equipment ensures energy savings with optimal efficiency. We also maximize user satisfaction with after-sales technical support and fast spare parts supply. For professionals seeking superior engineering, reliable performance, and long-lasting use, CONSTMACH spiral sand washers are the right choice. Kjdpfx Aoxpxv Tsbcelp What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: ready for operation (used), Powder dispenser, screw conveyor, screw mixer, Z-arm mixer, used machine Overall dimensions : 1350 x 750 x 1190 mm Electrical data: 230/400 V ; 0.43 kW ; 50/60 Hz Klsdpfx Absyvfr Nscjp The screw conveyor has a double-bearing design and is equipped with a cover that opens under the effect of the material flow.

Condition: new, Screw compressor with refrigeration dryer Belt-driven. Space-saving. Affordable. Easy operation thanks to Infologic² Basic control. Efficient compressor stage. Perfect solution for industrial and trade businesses. Impressive compressed air quality Features in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Control: Infologic² Basic control unit Kledpjwm Ih Aofx Abcsp Refrigeration dryer: Attached, refrigerant R513A Receiver: Horizontal, painted, manufactured according to AD2000 Performance data: Flow rate at operating pressure 9.5 bar: 0.98 m³/min Operating pressure min. / max. 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 9.6 kW Rated motor power; IP55 7.5 kW Oil volume 3.2 lt Pressure dew point of refrigeration dryer (20°C 100% RH) approx. +3 °C Installation data: Ambient conditions min. / max. 1 / 46 °C ΔT above cooling medium temperature 2 °C Cooling air requirement 756 m³/h Free fan pressure 30 Pa Noise level 68 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight: Length x width x height 1540 x 665 x 1350 mm Weight 240 kg Compressed air outlet G 1/2" female Compressed air tank capacity 270 lt INCLUDES OPTION: Aftercooler C43 MINI (so that the Condensate accumulation is reduced to a minimum)

Condition: new, AGRE ALUP ALLEGRO 14+ 13 270 Speed controlled. Space-saving. Inexpensive. Efficient 1:1 direct drive. Easy operation. Low energy consumption. High performance. Suitable for a wide range of applications. Convincing compressed air quality. Cyclone separator and refrigeration dryer built in. Equipment in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled design Drive: High frequency motor, with 1:1 direct drive Control: Speed controlled with frequency converter Control: Graphic control C55DD Refrigerant dryer: Integrated, refrigerant R513A Filtration: incl. cyclone separator Container: horizontal, painted Performance data: Volume flow at operating pressure 7.0 bar = 0.26-2.26 m³/min Kledpfxjixt I Ho Abcjp Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 16.2 kW Rated power motor 15 kW Oil quantity 5.2 lt Dimensions and weight: L x W x H = 1655 x 655 x 1550 mm weight 400 kg Compressed air outlet G 3/4'' Capacity compressed air tank 270 lt

Condition: new, AGRE ALUP SCK 10-10 270+ Belt driven. Space saving. Inexpensive. Easy operation. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Built-in refrigerant dryer. Sound-insulated screw compressor with V-belt drive on compressed air receiver 270 l with built-in refrigeration dryer, integrated cyclone separator, with electronic condensate drain and C55 graphic control. Equipment in detail: Compression concept: oil-lubricated screw compressor Cooling: air cooled Drive: Efficient IE3 motor, belt drive Control: fixed speed Control: Aircontrol 5.0 Refrigerant dryer: attached, refrigerant R513A Filtration: incl. cyclone separator Tank: horizontal, painted, manufactured according to AD2000 Performance data: Volume flow at operating pressure 9.5 bar = 1.06 m³/min Kedpfsixt H Njx Abcjlp operating pressure min. / max. 5,5 / 10,0 bar Total power consumption at 9.5 bar / full load 10.2 kW Rated power motor; IP55 7.5 kW Oil quantity 4 lt Dimensions and weight: L x W x H = 1530 x 662 x 1531mm weight: 310 kg Compressed air outlet: G 1/2'' Compressed air tank capacity: 270 lt

Condition: new, Screw compressor AGRE Model Sonetteo 7,5+ 10 Screw compressor compact unit incl. refrigerant dryer and DL tank 270 lt. Belt driven. Space saving. Inexpensive. Easy operation thanks to Infologic² Basic control. Efficient compressor stage. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Mounted refrigeration dryer. Equipment in detail: Compression concept: oil-lubricated screw compressor Cooling: air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: fixed speed Klsdpohun Tzefx Abcep Control: Infologic² Basic control unit Refrigerant dryer: Mounted, refrigerant R513A Tank: 270 lt. horizontal painted 11 bar Motor power: 5,5 kW Pressure: 10 bar Delivery rate: 780 lt./min incl. time controlled condensate drain Dimensions L x W x H = 1500 x 1350 x 600 mm

Condition: excellent (used), From 2019, 15 kW, with container PM 32-E (32 m3) Kodsyti Ipspfx Abcjlp

Condition: like new (used), Year of construction: 2024, operating hours: 1,500 h, functionality: fully functional, Atlas Copco compressor model G 5 FF with integrated dryer and 500-litre tank. Main specifications: max pressure 10 bar, power 5 kW (7.5 HP), air delivery 888 litres/min. New list price: EUR 9,300. Kjdpfx Asyu Rl Eebcolp

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SCC, warranty duration: 12 months, volume flow: 45 m³/h, screw conveyor length: 6,000 mm, type of input current: three-phase, screw diameter: 323 mm, input voltage: 400 V, rotational speed (max.): 240 rpm, rotational speed (min.): 140 rpm, NEW Cement Screw Conveyor – SCC Type | Made to Order | ISO 9001 Certified | Exported to 40+ Countries Custom-manufactured to order. Send us your diameter, length, and installation angle — receive a full technical quote within 24 hours. INOTEK SCREW manufactures heavy-duty SCC-type cement screw conveyors for bulk material handling in cement plants, dry mortar facilities, fly ash transfer, lime and gypsum processing lines. Based in Ankara, Turkey, we have supplied equipment to over 40 countries with full export documentation and ISO 9001:2015 certified production. KEY SPECIFICATIONS: - Diameter: Ø114 / Ø168 / Ø219 / Ø273 / Ø323mm – any size made to order - Drive speed: 140 / 200 / 240 RPM - Motor power: 1.5 kW to 22 kW (IE2 efficiency class) - Material: Carbon steel S235/S355 standard | AISI 304/316 stainless steel on request - Screw flights: cold-rolled, 3–10mm thickness - Orientation: horizontal, inclined (up to 45°), or vertical - Custom inlet/outlet: conical, square, or rectangular - Surface treatment: primer + epoxy topcoat standard | hot-dip galvanizing on request APPLICATIONS: Cement | Fly ash | Limestone powder | Dry mortar | Gypsum | Clay | Silo filling & emptying | Batching plants | Asphalt facilities WHY INOTEK: ✔ ISO 9001:2015 certified factory ✔ Exported to 40+ countries – full documentation (packing list, EUR.1, certificate of origin, test reports) Kljdpfx Aboyq H Iujcep ✔ References: Coca-Cola, Unilever, Anadolu Efes, major construction groups ✔ 20–35% more competitive than equivalent European pricing ✔ Production lead time: 3–5 weeks from drawing approval REQUEST A FREE QUOTE WITHIN 24 HOURS: Send us your required diameter, length, material type, and installation angle – we return a full technical offer and delivery schedule.

Condition: used, In our opinion, the machine is in good used condition and can be inspected under power by appointment. Klsdpfjvyutgex Abcjp Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: like new (used), Year of construction: 2017, operating hours: 30,195 h, functionality: fully functional, Screw compressor Atlas Copco ZT160VSDFF Inverter and dryer integrated. 160 kW 10.40 bar 24.20 m³/min Kodpeyvywzefx Abcjlp

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 04/2027, type of input current: AC, TOP Sanomat Amigo Features: Manual dispensing via extra-large, robust button at the outlet On/Off switch for device/cooling Simple technology Disinfection cleaning using the rinse-through method Free accessories (tools, brushes, seals, and cleaning nozzle) Kedsxmq Uvopfx Abcelp Capacity 1.5 liters Connection: 230V Dimensions: 228 x 315 x 422 mm (W x H x D) Used device, cleaned Visit us!

Condition: good (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 1012022, overall weight: 500 kg, total length: 1,500 mm, total width: 700 mm, total height: 1,200 mm, Equipment: refrigerant dryer, RENNER RSKF-PRO 2-11 Screw Compressor - Operating voltage: 400 V - Frequency: 50 Hz - Connection power: 11 kW - Permissible operating overpressure: 10 bar - Delivery rate: 2040 l/min at 6.0 bar - Includes refrigerant dryer Kjdeyvtc Ropfx Abcslp Note: The item must be collected definitively between 12.05. and 22.05.2026 on a date to be agreed. FCA D-74821 Mosbach – loaded onto truck

Condition: good (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 1012023, overall weight: 500 kg, total length: 1,500 mm, total width: 700 mm, total height: 1,200 mm, Equipment: refrigerant dryer, RENNER RSKF-PRO 2-11 Screw Compressor - Operating voltage: 400 V Kledjyvr H Uepfx Abcjp - Frequency: 50 Hz - Connection power: 11 kW - Permissible operating overpressure: 10 bar - Delivery rate: 2040 l/min at 6.0 bar - Includes refrigerant dryer Note: The item must be collected definitively between 12.05. and 22.05.2026 on a date to be agreed. FCA D-74821 Mosbach – loaded onto truck