Used Sectional Door for sale (14,062)

Condition: new, Year of construction: 2018, functionality: fully functional, Hello we offer here a brand new climate outdoor unit from Toshiba. The device was built in 2018 but was never installed. Tedpfxelc Euke Ac Nof The device has 45kW.

Year of construction: 2009, condition: ready for operation (used), LAMINATING MACHINE FOR DOORS IPS MOD. PC-2500-SCBP Machine for the application of adhesive protective film on flat surfaces. Equipped with motorized feed with rollers and automatic cutting system. Machine for fixed height table line +/- 900 mm. Year 2009. Top and bottom gluing at the same time. TECHNICAL CHARACTERISTICS OF THE MACHINE - MINIMUM / MAXIMUM WORKING THICKNESS 15 / 50 MM - MAXIMUM WORKING WIDTH 2.400 MM - HEIGHT OF THE ROLLERS ADJUSTABLE TO THE FLOOR 840 / 950 MM - TOTAL POWER CONSUMPTION 3 KW - MINIMUM AIR PRESSURE REQUIRED 6 BAR Todpfehkr Ansx Ac Njf - VOLTAGE ELECTRICAL INSTALLATION 220 V - 380 V

Condition: excellent (used), functionality: fully functional, DEMAG hoist motor ZBR132 B12/2 B140 for DR10 hoist Tsdev Uhwzepfx Ac Njf very good condition Please also check out my other offers

Year of construction: 1998, condition: used, machine/vehicle number: MBMAKZDoppel, 1 piece - Demag chain hoist Crane hoist 250Kg DKUND 2-250 K V1 with double chain 125Kg payload each 10 pieces are available 250KG / 0.25t payload / lifting capacity - 1 fall Tjdpfxotn Rite Ac Nsf Distance between the two lifting chains variable 20-120cm, lifting height approx. 3m Without frame, only the chain hoist with both deflection rollers including the blue mounting plates is sold Weight complete approx. 50 kg, connection to 400V 50Hz TOP condition, fully functional. Not a worn or used device! Connect and put into operation. Comes from current operation Item location is 75053 Gondelsheim See pictures

Year of construction: 1985, condition: good (used), machine/vehicle number: 04.2187, Hydraulic indoor broaching machine in technically good condition Manufacturer: Arthur Klink Year of manufacture: 1985 reconditioned Weight: 2t Model: RIW 10 x 1200 x 400 Machine No: 04.2187 Tractive force: 10.000kg at 3m/min clearing speed: hydraulically stepless adjustable from 1m/min to 7m/min return speed: hydraulically stepless adjustable from 7m/min to 30m/min maximum stroke: 1200mm Broaching tool clamping: universal drawing head for flat shanks up to 26mm width maximum workpiece diameter: Ø max. 480mm (due to oil and chip tray) table opening: Ø 70mm Todpoixntwjfx Ac Njf power supply: 380 Volt / 50 Hz / 5kW

Year of construction: 2004, condition: used, CNC machining center for window and entrance door components KOCH Windoor410 Year of manufacture: 2004 Machining operations: Tjdpfswuyfpex Ac Nef Hinge drilling (sash) Strike plate marking and assembly hole drilling (frame) Strike plate milling Strike plate milling (4 mm rebate clearance) Workpiece dimensions: Workpiece length: 300 – 4,500 mm Workpiece width: 20 - 240 mm Workpiece thickness: 20 - 150 mm Machine equipped with 2 working zones. Maximum machining length with 2 working zones: 1,100 mm Maximum machining length with 1 working zone: 2,500 mm Machining units: a) Horizontal drilling unit with 1 drill spindle at fixed angle of 7° b) Horizontal drilling head with 3 individually selectable drill spindles c) Horizontal milling unit for lock cases and strike plate milling d) Vertical milling unit for profile change milling and strike plate milling e) Vertical drilling unit with 5 individually selectable drill spindles Connection data: Electrical connection: 400 V, 50 Hz, 3 phases Voltage fluctuations max. +6 % to -10 % Air connection: 7 bar Extraction air speed approx. 30 m/sec. Ambient temperature at installation site: min. 1°C, max. 40°C

Condition: good (used), Year of construction: 2012, DEMAG crane chain hoist DCM-Pro 2 80 1/1 H2.8 V16/4 80 kg with crane canopy (2x3m) The DCM-Pro manulift was developed for safe and fast load handling with one-hand operation. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Due to the control unit being rigidly connected to the load handling attachment, the operator only needs one hand to operate the chain hoist as well as to guide the load. Manufacturer: DEMAG Type: Crane chain hoist Model: DCM-Pro 2 80 1/1 H2.8 V16/4 Load capacity: 80 kg Control: GSA Type 4 Movement radius: sideways 3 metres and forwards/backwards 2 metres Todpfohwd E Njx Ac Nef Steel beam: included in the offer Condition: used  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: new, - Dimensions: 1800x800x860 mm - For 400x600 mm trays - Serial No.: 63730 - Year: 24-04-2023 - 10 levels per door Tsdpfxsw Elyas Ac Nef - 2 solid doors - Temperature: -10°C - Voltage: 230V - Power: 0.6 kW - Weight: 160 kg - Model without top cover

Condition: new, A complete range of DEMAG control switches for sale as a bundle, mostly new Tsdpfsv T U Scox Ac Nof

Year of construction: 1998, condition: excellent (used), machine/vehicle number: TH20010018, Demag bridge crane, crane canopy, crane track, indoor crane, crane Payload / lifting capacity max. 3.2t - 3200KG, track 13300mm Outer dimensions with head carriage approx. 13500mm Crane with FU control and servo motors!!! 2x Demag DH rope hoist with floor and radio control RC-J for individual or tandem control of both hoists Height from top edge of crane to hook approx. 900mm Tsdpfx Acov A Rr Do Njf Head carriage length with buffer approx. 2500mm Lifting height of rope hoist 6000mm Weight approx. 3200KG incl. 2x 25m guide rails HEB400 (400x300mm), incl. power rails!!! Beam lengths per side: 1x approx. 15m 1x approx. 10m Support spacing 10/10+5m Crane is dismantled, immediately available from location 75053 Gondelsheim Very good used condition ----- Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire about postcode Collection preferred

Year of construction: 1982, condition: used, machine/vehicle number: TH20000168, Demag bridge crane, crane canopy, crane track, indoor crane Payload / lifting capacity max. 0.5t - 500KG, track approx. 9000mm Outer dimensions with head carriage approx. 9200mm Demag PK chain hoist with floor control Height from top edge of crane to hook approx. 750mm Head carriage length with buffer approx. 1700mm Lifting height approx. 4500mm Weight approx. 1200KG Optionally, 2x 25m guide rails HEB340 (340x300mm), including conductor rails, are also available. Beam lengths per side: 1x approx. 10m 1x approx. 15m Crane is dismantled, immediately available from location 75053 Gondelsheim Used condition Todpfxev A Snmo Ac Nsf ----- Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire about postcode Collection preferred

Year of construction: 1980, condition: used, machine/vehicle number: TH20009955, Demag bridge crane, crane canopy, crane track, indoor crane Payload / lifting capacity max. 0.5t - 500KG, track approx. 9000mm Outer dimensions with head carriage approx. 9200mm Demag PK chain hoist with floor control Height from top edge of crane to hook approx. 750mm Head carriage length with buffer approx. 1700mm Lifting height approx. 4500mm Weight approx. 1200KG Optionally, 2x 25m guide rails HEB340 (340x300mm), including conductor rails, are also available. Beam lengths per side: 1x approx. 10m Tjdpfx Aev A Snaoc Nof 1x approx. 15m Crane is dismantled, immediately available from location 75053 Gondelsheim Used condition ----- Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire about postcode Collection preferred

Year of construction: 1979, condition: used, machine/vehicle number: TH20009957, Demag bridge crane, crane canopy, crane track, indoor crane, crane Payload / lifting capacity max. 2.5t - 2500KG, track approx. 9000mm Outer dimensions with head carriage approx. 9200mm Demag DH rope hoist with floor control Height from top edge of crane to hook approx. 750mm Head carriage length with buffer approx. 1700mm Lifting height of rope hoist 6000mm Weight approx. 1500KG Optionally, 2x 25m guide rails HEB340 (340x300mm), including conductor rails, are also available. Beam lengths per side: 1x approx. 10m Tsdpfxjv A Sg Ne Ac Njf 1x approx. 15m Crane is dismantled, immediately available from location 75053 Gondelsheim Used condition ----- Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire about postcode Collection preferred

Year of construction: 1976, condition: used, machine/vehicle number: TH20010161, Demag bridge crane, crane canopy, crane track, indoor crane, crane Payload / lifting capacity max. 10t - 10000KG, track 11750mm Outer dimensions with head carriage approx. 12000mm Tedpfxsv A Sa No Ac Njf with steel hoist and floor control Height from top edge of crane to hook approx. 900mm Head carriage length with buffer approx. 3500mm Lifting height of rope hoist 10000mm Crane weight approx. 4000KG incl. 2x 25m guide rails HEB280, incl. conductor rails!!! Beam lengths per side: 1x approx. 10m 1x approx. 15m Support spacing 10m/10+5m Crane is dismantled, immediately available from location 75053 Gondelsheim Used condition ----- Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire about postcode Collection preferred

Year of construction: 1970, condition: used, machine/vehicle number: TH20010142, Demag bridge crane, crane canopy, crane track, indoor crane, crane Payload / lifting capacity max. 10t - 10000KG, track 11750mm Outer dimensions with head carriage approx. 12000mm with steel hoist with floor control Height from top edge of crane to hook approx. 900mm Head carriage length with buffer approx. 3500mm Tsdpfjv A Rxkex Ac Nof Lifting height of rope hoist 10000mm Crane weight approx. 4000KG incl. 2x 25m guide rails HEB280, incl. conductor rails!!! Beam lengths per side: 1x approx. 10m 1x approx. 15m Support spacing 10m/10+5m Crane is dismantled, immediately available from location 75053 Gondelsheim Used condition ----- Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire about postcode Collection preferred

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, controller model: Amada Operator, bending force (max.): 320 t, stroke length: 350 mm, working length: 4,100 mm, TECHNICAL DETAILS Press force: 320 t Bending length: 4,100 mm Stroke: 350 mm MACHINE DETAILS Control: Amada Operator Total power requirement: 32 kW Dimensions & Weight Tedjxwnxtspfx Ac Nof Space requirements: approx. 4,300 x 2,600 x 3,400 mm Machine weight: approx. 23,500 kg EQUIPMENT Amada quick-change tool holder Amada lower tool holder Controlled axes: y1, y2, x, r, z1, z2 Rear safety doors Two-hand foot operation

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning diameter: 380 mm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, bar passage: 77 mm, CNC Lathe with Loading and Unloading Robot and Chip Conveyor! TECHNICAL DETAILS Travel X-axis: 230 mm Travel Y-axis: 100 mm Travel Z-axis: 575 mm Maximum machining diameter: 380 mm Maximum cross slide swing diameter: 675 mm Maximum distance between spindles: 541 mm Maximum bar capacity: 77 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 21 m/min Rapid traverse Z-axis: 33 m/min Main Spindle Speed: 4,000 rpm Motor (100% / 30 min): 22 / 26 kW Spindle bore: 88 mm Sub Spindle Speed: 6,000 rpm Motor (25% duty cycle): 7.5 kW Travel: 585 mm Tool Turret with Live Tools Number of stations: 12 Maximum speed: 4,500 rpm Motor: 5.5 kW Tool shank height: 25 mm Tool shank diameter: 40 mm MACHINE DETAILS Operating hours: approx. 66,000 h Tedpfx Acexxl S Tj Nof DIMENSIONS & WEIGHT Installation area (L x W x H): 285 x 187 x 187 cm Machine weight: 5,400 kg EQUIPMENT Mitsubishi RV-12SL-S12 loading and unloading robot Interface for bar feeder Automatic parts catcher Automatic door High-pressure cooling, 5 bar Chip conveyor

Condition: ready for operation (used), Year of construction: 2008, operating hours: 16,722 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 4,200 rpm, controller model: Heidenhain iTNC 530, Submission of a bid obligates the buyer to collect the machine by the end of this year! Todpfxexx Uayo Ac Njf TECHNICAL DETAILS Travel X: 4,000 mm Travel Y: 1,200 mm Travel Z: 1,000 mm Maximum spindle speed: 4,200 rpm Tool holder: SK50 DIN 69871 Table load capacity: 10,000 kg MACHINE DETAILS Control system: Heidenhain iTNC 530 Operating hours Control unit on-time: 47,181 h Machine on-time: 45,697 h Program running time: 16,722 h EQUIPMENT 45° diagonal milling head with 2.5° indexing Drum-type tool changer with 24 tool positions (vertical tool change) Machine enclosure: front guard with 2 doors Rear guard with additional door Side slats for machining of extra-long workpieces Longitudinal chip conveyor (discharge on right-hand side) Control cabinet air conditioning Swivel arm for machine control (operation from front and rear)

Year of construction: 2012, operating hours: 6,047 h, condition: ready for operation (used), functionality: fully functional, rotational speed (max.): 24,000 rpm, travel speed (max.): 60,000 mm/min, working length: 7,500 mm, machine/vehicle number: 0809-M_001327515, number of slots in tool magazine: 16, number of axes: 14, TECHNICAL DETAILS Number of controlled NC axes: 14 Processing length: 7,500 mm Max. cross-section W x H / length for single bar processing: 400 x 300 mm / 7,500 mm Min. cross-section W x H / length for single bar processing: 30 x 30 mm / 300 mm Maximum steel wall thickness: 5 mm Max. traverse speed X-axis: 60 m/min Max. traverse speed Y-axis: 60 m/min Max. traverse speed Z-axis: 30 m/min Spindle speed range: 1 - 24,000 rpm Milling motor power: 16 kW A-axis rotation: ±110° continuous C-axis rotation: ±220° continuous Tool holder: HSK-F63 Max. tool dimensions mill/drill (d/l): Ø 50 mm / 200 mm Max. tool dimension disc milling cutter (d): Ø 500 mm Number of stations in tool magazine: 16 Number of special tool positions: 2 Automatic positioning of clamping fixtures: Yes Number of clamping fixtures: 10 Profile systems with quick-change system: Yes Max. number of profiles per machine setup: Up to 10 profiles Number of profile punching units: 2 Tjdpjxxiuxefx Ac Nof Automatic repositioning of clamps during 2 machining steps: Yes MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 15 x 4 x 5.64 m Weight: 12 t Operating Hours Power-on time: 24,613 h Spindle running time: 6,047 h EQUIPMENT Quick-change system for profile installations Automatic clamping fixture positioning 19" TFT color touch display Schüco CAM software Machine operation based on Windows 8 with menu navigation Self-programming without NC/CNC knowledge required

Year of construction: 2006, condition: repair required (used), functionality: not functional, machine/vehicle number: 059061003, No reserve price – guaranteed sale to the highest bidder! Bidding obligates timely collection by 31/12/2025! The offer includes: MBO T800.1/642/R (year of manufacture: 2006; serial number: 059061003) Tedpfxjxyfage Ac Nef MBO Z-2 knife folding unit (year of manufacture: 2008; serial number: 82 06 10 09) MACHINE DETAILS Electrical specifications Mains voltage: 400/50 V3~ / Hz Control voltage: 24/25 V – / A Current consumption: 2.5 A Fuse rating: 16 A Note: Only units 2 & 3 as well as the knife folding unit are available. There is a defective electronic component at the delivery section. The feeder is missing.

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 970 mm, table load: 1,200 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Tsdpfxoxyiire Ac Nsf Travel X-axis: 900 mm Travel Y-axis: 800 mm Travel Z-axis: 970 mm Spindle speed: 12,000 rpm Distance between spindle center and table top: 100 – 900 mm Distance between spindle head and pallet center: 70 – 1,040 mm Spindle taper: HSK 100 Table size: 630 x 630 mm Table load capacity: 1,200 kg Max. workpiece diameter: 1,000 mm Max. workpiece height: 1,300 mm Tool changer: 90 positions Minimum increment: 0.001 mm Creep feed: 1 – 4,000 mm/min (23 steps) Cutting feed: 1 – 50,000 mm/min Rapid traverse: 50,000 mm/min Pallet change time: 17 s MACHINE DETAILS Electrical data Operating voltage: 400 V, 3-phase, 50 Hz Total current: 98 A Incoming cable cross-section: 35 mm² Main fuse: 100 A Note: 2 trucks are required for transport.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, bending force (max.): 85 t, stroke length: 215 mm, throat depth: 410 mm, distance between stands: 1,750 mm, working length: 2,050 mm, TECHNICAL DETAILS Press force: 85 t Bending length: 2,050 mm Distance between uprights: 1,750 mm Stroke: 215 mm Throat depth: 410 mm MACHINE DETAILS Control: DELEM Dimensions & Weight Machine dimensions (L x W x H): 2,700 x 2,100 x 2,400 mm Weight: 7,900 kg Tedoxxq T Njpfx Ac Njf EQUIPMENT Two-hand operation 2 support arms Side safety doors Lasersafe Fissler Wila tool clamping system Die shifting Crowning Tool cabinet

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, arm reach: 3,900 mm, conveyor belt length: 8,000 mm, conveyor belt width: 600 mm, product height (max.): 2,600 mm, No reserve price – guaranteed sale to the highest bidder! The machine's original price in 2021 was EUR 1,480,000 (net)! TECHNICAL DETAILS Tjdpfxexu Upme Ac Njf Performance and Capacity Processing capacity: 60 pallets per day Boxes per pallet: up to 54 units Maximum box weight with 54 boxes: 15 kg Overall height from top of pallet: 2,500 mm Maximum total height (including pallet): 2,600 mm Maximum total load: up to 500 kg Process Times Stacking time per box: 12–15 s Wrapping time: approx. 30 s AGV cycle time (incl. pallet change, wrapping, labeling, transport): about 4 min Transport and Material Flow AGV travel distance: approx. 70 m Number of pallet change positions: 6 Available positions during pallet change: 5 Robot Industrial robot: 6-axis articulated arm robot Payload: 120 kg Reach: 3,900 mm Availability: 99.9 % Protection class (robot): IP64 Robot control: KUKA, protection class IP54 Robot pedestal: height 1,500 mm Safety and Control Technology PLC: Siemens S7-1500 with MP 277 Touch Panel, 19" industrial PC panel Central safety control: with decentralized I/O modulation Profinet slave card: for PLC communication Safety light curtains: 1× A 1,500 mm with muting (3 for robot cell, 1 for door, 1 for wooden pallet stacking) Conveyor Technology and Pallet Handling Powered pallet conveyor: length 4 m, width 1,200 mm Pallet transfer station: GoPal E24/W for docking station Pallet station power unit: GoPal 400 / E24/W Pallet detection kit: included AGV System Transport unit: autonomous AGV GoBot GoPal E24/W Server: GoControl Operating unit: GoPal operating unit (1× call button) Interfaces: GoPal AUX Interface Box (I/O) Integration: fully integrated into AGV system Conveying Technology and Singulation Box conveying line: 17 m long, 600 mm wide Horizontal robot transfer section: 1 m Belt conveyor for boxes (new line): 8 m long, 600 mm wide Singulation system: pneumatic pusher Singulation stopper: included Pallet Stacking Systems Automatic pallet stacking system for Euro pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar Automatic pallet stacking system for wooden pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar MACHINE DETAILS System footprint: 5.6 m² (base area) Connected load: 38 kW Weight: 3,500 kg Note: Further information on the equipment configuration can be found in the attached specification sheet.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 860 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: Fanuc 0i-MF Plus, spindle speed (max.): 15,000 rpm, Machining center with RoboJob Mill Assist automation, year of manufacture 2025! TECHNICAL DETAILS Travel Range X-axis travel: 860 mm Todpfxexz A Udo Ac Nef Y-axis travel: 550 mm Z-axis travel: 550 mm Table Table size: 950 x 550 mm Maximum load: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 150 mm Spindle nose to table surface: 150 - 700 mm Linear Guides & Speeds Linear guides: Ball guideways X/Y, roller guideway Z Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate during milling: 0 - 10,000 mm/min Minimum increment: 0.001 mm Tool Magazine Magazine positions: 30 System: random-access Maximum tool diameter: 75 mm Maximum tool diameter with adjacent slots free: 150 mm (for 40 tools: 130 mm) Maximum tool length: 300 mm Maximum tool weight: 7 kg Spindle Spindle taper: SK-40 Drive power (30min/continuous): 18.5/11 kW Speed: 15,000 rpm MACHINE DETAILS Controller: Fanuc 0i-MF Plus Dimensions & Weight Machine dimensions (W x D x H): 2,260 x 2,900 x 2,775 mm Required floor space (W x D x H): 3,160 x 3,000 x 3,000 mm Machine weight: approx. 5,400 kg Coolant, Chip, and Compressed Air Management Coolant system: 300-liter tank and pumps Chip evacuation: chip spirals right and left in the machine bed Compressed air connection: at the spindle (M32/M33) Compressed air through the spindle: (M38/M39) Compressed air and coolant gun Electrical and Pneumatic Requirements Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar EQUIPMENT Prepared for fourth axis (FANUC control), incl. wiring and Harting connector (without axis driver) Bed flushing system Integrated coolant pump with 20 bar pressure Belt-type chip conveyor incl. chip trolley RENISHAW OMP-60 probe with infrared transmission RENISHAW NC4+ tool laser measurement system and tool breakage monitoring Auto-door (side door) Pneumatic interface for workpiece clamping RoboJob Mill Assist 25kg, year of manufacture 2025 Full enclosure with double gripper

Condition: new, Year of construction: 2025, A compact design sheet fiber laser metal cutting machine with complete protection Small occupied space balances complete protection and higher safety. Each frame of the cutting machine bed is welded after mortise-and-tenon joint to achieve perfect mechanical property and better stability and firmness. The pull-out cutting machine table, with the electric table optional, saves space occupation and freshen up the user operation experience. Convenient and fast open&close with one click; The laser cutter door is safe and reliable, by using rack-pinion transmission mode combined with self-locking cutting machine system Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W, 12000W Cutting Area: 1000*1500mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Tjdehwv N Hopfx Ac Njf CNC or Not: Yes Cooling Mode: WATER COOLING