Used Segment Grinding Machine for sale (64,238)

Condition: new, Year of construction: 2026, Surface Grinding Machine 400 × 1000 The 400 × 1000 surface grinding machine is an advanced solution designed for high-precision flat surface grinding in the machine-building industry. Equipped with automatic feeds on all three axes and a digital readout system, it ensures excellent machining accuracy while maintaining a rigid and robust construction. A key advantage of this magnetic surface grinder is its ability to handle heavy loads up to 600 kg, making it a reliable choice for demanding production applications. Construction and Performance The machine is built on a heavy-duty bed construction that provides high rigidity and effectively minimizes vibrations during operation. The spindle runs at 1450 rpm and is mounted on precision bearings, ensuring stable operation of the grinding wheel with dimensions 350 × 40 × 127 mm. The hydraulic system controls the longitudinal table movement within a speed range of 7–23 m/min, while automatic cross and vertical feeds enable precise motion control. The 406 × 1020 mm working table, equipped with an electromagnetic chuck, facilitates secure workpiece clamping and enhances operational safety. An integrated coolant system with a 0.14 kW pump efficiently dissipates heat, preventing thermal distortion and ensuring dimensional stability. Precision and Productivity Precision is achieved through advanced feed mechanisms and accurate control systems. The automatic intermittent cross feed (0.1–8 mm) and vertical feed increments down to 0.005 mm allow machining tolerances below 0.01 mm, which is essential for components with high dimensional requirements. Productivity is further enhanced by a maximum table travel of 450 × 1130 mm and a cross feed speed of up to 990 mm/min, enabling efficient machining of large surfaces without compromising accuracy. The grinding wheel operates at an optimized speed, ensuring uniform material removal, reduced wheel wear, and a surface finish of Ra below 0.2 μm. The three-axis digital readout system eliminates manual positioning errors, shortens setup time, and increases throughput in production cycles. Technical Data Working table size: 406 × 1020 mm Maximum table travel: 450 × 1130 mm Table T-slots: 14 × 3 mm Longitudinal table speed: 7–23 m/min Maximum distance from table surface to spindle center: 570 (460) mm Maximum load capacity (including chuck): 600 kg Automatic intermittent cross feed: 0.1–8 mm Rapid cross feed: 990 mm/min Handwheel feed (cross): 0.02 mm (0.001") per graduation 5 mm (0.2") per revolution Grinding wheel dimensions: 350 × 40 × 127 mm Grinding wheel speed: 1450 rpm Automatic vertical feed: 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm Rapid vertical feed: 480 mm/min Handwheel feed (vertical): 0.005 mm (0.0002") per graduation 1 mm (0.04") per revolution Spindle motor power: 5.5 kW Hydraulic oil pump motor: 2.2 kW Coolant pump motor: 0.14 kW Vertical drive motor: 1 kW Cross feed drive motor: 0.04 kW Machine weight: 4000 kg Njdpoycqwwofx Adwecl Machine dimensions (L × W × H): 3300 × 2400 × 2000 mm Standard Equipment 3-axis digital readout Electromagnetic table 406 × 1020 mm Grinding wheel Grinding wheel balancing arbor Grinding wheel flange Tool kit 24V machine lighting Coolant system

Condition: new, Year of construction: 2026, The CORMAK SM75DC belt grinding machine is a high-efficiency industrial metal belt grinder designed for professional metal surface processing where precision and effective dust removal are equally important. Thanks to the integrated extraction system, solid steel construction, and large working surface, the SM75DC model performs excellently in production plants and metal workshops, ensuring a clean and safe working environment. Main advantages of the machine Extraction system with 860 m³/h capacity – effectively removes dust and metal particles during grinding. Two belt speeds (14.5 / 29 m/s) – enable optimal adjustment of grinding speed to the material being processed. Stable steel base – provides rigidity and vibration damping, improving both working comfort and surface quality. Adjustable grinding angle with lock – allows precise positioning of the belt to the workpiece. Quick abrasive belt change system – minimises downtime during retooling. Spring-loaded belt tensioning system – ensures automatic and stable belt tension throughout the operation. Design and technology The CORMAK SM75DC belt grinding machine is designed for continuous operation under demanding industrial conditions. The rigid frame made of thick-walled steel, solid base, and precision belt-tensioning mechanism ensure both stability and long service life. The built-in dust extraction unit with two Ø100 mm nozzles significantly reduces workplace contamination and protects the operator. Precision and performance Equipped with a 75 mm wide and 2000 mm long abrasive belt, the machine provides a large contact area for fast material removal and high-quality surface finishing. Two operating speeds (14.5 and 29 m/s) allow the operator to match the speed to the work material – from rough grinding of structural steel to fine finishing of aluminium or stainless steel components. Applications The stationary CORMAK SM75DC belt grinding machine is ideal for: Njdpfoycqitex Adwscl production and industrial facilities, locksmith and welding workshops, surface preparation and finishing operations, deburring, weld grinding, and surface preparation before painting or galvanising. Standard equipment Stable steel base with adjustable tilt Abrasive belt 75 × 2000 mm Built-in dust extraction system with 0.55 kW motor Anti-spark and dust shields Tilting protective guard Technical data Abrasive belt dimensions (L × W) 2000 × 75 mm Belt speed 14.5 / 29 m/s Motor speed 1420 / 2840 rpm Main motor power 2.2 kW Extraction motor power 0.55 kW Extraction capacity 860 m³/h Extraction nozzle diameter 2 × Ø100 mm Power supply 400 V / 50 Hz

Condition: like new (used), Machine come with lot of additional equipement. Ncedpfx Ajhvr Hbedwsl

Condition: excellent (used), workpiece diameter 10 - 250 mm threading length 900 mm thread pitch 0,3 - 100 mm spindle turning speed range 72 / 1700 - 2540 U/min relief of the tap 0,03 - 8 mm clamping length max. 1190 mm max. module 10 workpiece turning speeds 0,4 - 160 U/min total power requirement 13 kW weight of the machine ca. 7,4 t Nedpfsyb S Riex Adwscl dimensions of the machine ca. 4,5 x 2,0 x 2,1 m Many accessories.

Condition: excellent (used), Year of construction: 1997, grinding diameter 80 - 250 mm grinding length 600 mm centre height 175 mm Ncjdjyb S Rcepfx Adwsl longitudinal feed 750 mm workpiece turning speeds 6 - 600 U/min grinding spindle speed 1500 - 3600 U/min cross movement - autom. and by hand 320 mm Control Kelco 80 weight of the machine ca. 4,4 t dimensions of the machine ca. 3,1 x 2,1 x 2,0 m

Condition: excellent (used), thread dia. 10 - 150 mm grinding length 900 mm thread pitch max. 3 mm workpiece diameter max. 260 / 340 mm threading length max. 50 mm centre distance 1200 mm centre height 1100 mm grinding wheel diameter 275 - 400 mm grinding wheel width 14/20/30/40/50 grinding head-swivable, cross 4 re / 1 li ° max. stroke of grinding wheel 140 mm peripheral speed max. 35 m/sec total power requirement 14 kW Nsdpfxjyb S N Se Adwocl weight of the machine ca. 5,8 t dimensions of the machine ca. 5,0 x 2,0 x 2,1 m

Condition: new, Year of construction: 2025, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. Ncjdpsq Nf Uwofx Adwjl 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Condition: new, Year of construction: 2025, power: 7.5 kW (10.20 HP), Batch ball mills find applications in various industries where the processing of materials in discrete batches is required. The versatility of batch ball mills makes them suitable for a range of applications. Here are some common batch ball mill applications: 1. Ceramics Industry: - *Glaze Preparation:* Batch ball mills are extensively used in the ceramics industry for preparing glazes. Raw materials such as feldspar, quartz, and clay are ground with ceramic balls to achieve the desired particle size for glaze formulation. Nedpfxeq I N H No Adwscl 2. Chemical Industry: - *Material Grinding:* Batch ball mills are used for grinding and blending various chemical materials. This includes the production of pigments, dyes, and other specialty chemicals where precise particle size control is crucial. 3. Pharmaceuticals: - *Drug Formulation:* In pharmaceutical manufacturing, batch ball mills are used for grinding and blending powders to create drug formulations. The controlled environment provided by these mills is essential for maintaining the integrity of pharmaceutical compounds. 4. Food Industry: - *Ingredient Mixing:* Batch ball mills may find application in the food industry for mixing and grinding ingredients. This can include the production of food additives, flavorings, and other powdered or granular products. 5. Mining and Minerals Processing: - *Ore Grinding:* Batch ball mills are used in mining and minerals processing for grinding minerals and ores. The controlled grinding helps in obtaining the desired particle size for subsequent processes, such as mineral separation or extraction. 6. Paints and Coatings: - *Pigment Dispersion:* In the paints and coatings industry, batch ball mills are employed for dispersing pigments into paint formulations. Achieving a uniform particle size is crucial for the quality and appearance of the final coating. 7. Building Materials: - *Raw Material Grinding:* Batch ball mills are used in the preparation of raw materials for the production of building materials, such as cement and concrete. Grinding of materials like limestone and clay helps in obtaining the desired fineness for subsequent processes. 8. Electronic Materials: - *Ceramic Powder Processing:* In the electronics industry, batch ball mills can be employed for processing ceramic powders used in the production of electronic components and insulating materials. 9. Research and Development: - *Material Testing:* Batch ball mills are often used in research and development laboratories for testing and optimizing material formulations. They provide a controlled environment for small-scale processing and experimentation. 10. Customized Applications: - *Specialized Processes:* Batch ball mills can be adapted for various specialized processes in different industries where precise grinding and mixing are required. Custom modifications can be made based on specific application requirements. When using a batch ball mill, it's important to consider factors such as the type of material being processed, desired particle size, and the specific requirements of the end product. Additionally, following the manufacturer's guidelines and maintaining proper operating conditions are essential for efficient and effective milling processes.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 004-040.0004, CNC Cylindrical Grinding Machine Manufacturer: STUDER Model: S22 CNC Year of manufacture: 2009 Machine / Workpiece Data Distance between centers: approx. 650 mm Center height: 175 mm Maximum workpiece weight: 150 kg Maximum grinding length: approx. 800 mm Linear Axes / Guides X-axis (cross slide): Maximum travel approx. 310 mm X-axis feed rate up to approx. 15,000 mm/min (depending on configuration) Nedpfx Adsxtpnzswjcl Z-axis (longitudinal slide): Maximum travel approx. 850 mm Z-axis feed rate up to approx. 30,000 mm/min Grinding Spindle / Grinding Wheel Main spindle power, e.g. 12.5 kW in the standard version Standard grinding wheel diameter e.g. Ø 500 × 80 × 203 mm, circumferential speed up to approx. 50 m/s Optional high-speed grinding (HSG): e.g. grinding wheel Ø 400 x 40 x 127 mm, circumferential speed up to approx. 140 m/s Control / Software / Equipment Control, standard: e.g. FANUC 31i-A (PC integrated) with StuderWIN operator interface Guideways: Machine bed made from Granitan® S103 (mineral cast) for thermal stability and damping Dimensions / Electrical Data Machine weight approx. 8,500 kg Power supply, typically 400 V / 50 Hz (country-specific)

Condition: used, Year of construction: 2012, grinding length 1000 mm grinding width 600 mm workpiece height 400 mm table-size 1.100 x 500 mm max. table load 1.000 kg dist. center of grinding spindle - table 600 mm table travel longitudinal 1400 mm table travel cross 550 mm Njdpfx Adsya Ihhewjcl table feed 1 - 30 m/min turning speed range - grinding wheel 1.000 - 3.000 U/min power capacity - grinding motor 11,0 kW grinding wheel size 400 x 80 x 127 mm magnetic clamping plate 1000 x 500 mm dressing device Tischabrichter voltage 400 V total power requirement 21 kW weight of the machine ca. 6,0 t dimensions of the machine ca. 4,30 x 2,95 x 2,55 m band filter unit 1,80 x 1,30 x 0,80 m hydraulic power unit 0,90 x 0,75 x 0,95 m suction device 1,10 x 0,60 x 0,70 m - Serial-No.: Available at end of january 2026 - autom. vertical feed - table dresser with compensation - electr. hand wheel - paper band filter unit with magn. separator - coolant mist extraction unit

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK SG460S 400V Metal Drum Grinder – Advanced Through-Feed Grinding Machine The CORMAK SG460S 400V metal drum grinder is an advanced through-feed machine designed for precise grinding of metal components. With a grinding drum and a working width of 460 mm, this model is ideal for serial production and facilities that require high-quality surface finishing. It is especially effective for processing small parts after welding or laser cutting. Key Advantages of the Machine 120 mm grinding drum ensures even grinding without risk of burning or scratching Conveyor belt provides smooth transport of the workpiece and stable guidance under the grinding unit Adjustable feed speed from 0 to 4.0 m/min allows adapting the working pace to the material type Dust extraction system with a Ø100 mm outlet ensures efficient dust removal, improving working conditions and component longevity Robust industrial construction (148 kg) guarantees machine stability even during intensive use Design and Technology The SG460S model is designed for stability, precision, and durability. The main frame is made of steel, providing resistance to vibration and deformation. The main 3.0 kW motor drives the grinding drum at 2800 rpm, enabling effective removal of excess material and burrs even in hard steel grades. The 60 W feed motor works with a speed controller, allowing the operator to precisely control the grinding process. The large conveyor belt width of 465 mm enables processing wide elements in a single pass, minimizing operating time. Precision and Work Efficiency The machine provides precise control over the thickness of the processed workpiece in the range of 5 to 80 mm. The grinding belt speed of 14 m/s ensures high surface quality without burning effects. The drum diameter and working length (465 mm) translate into even contact pressure and a uniform final result. Standard Equipment 120 mm grinding drum Conveyor belt width 465 mm Main motor 3.0 kW Feed motor 60 W Dust outlet Ø100 mm Worktable height adjustment Optional Equipment Metal dust and chip extraction system Grinding belts of various grit sizes Automatic material feeding system Technical Specifications Main motor power: 3.0 kW Voltage: 400 V Grinding drum speed: 2800 rpm Grinding drum belt size: 2760 × 75 mm Conveyor belt size: 1120 × 450 mm Worktable size: 460 × 465 mm Dust outlet diameter: 100 mm Conveyor feed speed (variable): 0–4 m/min Max. workpiece height: 80 mm Min. workpiece height: 5 mm Max. workpiece width: 460 mm Grinding drum dimensions (Ø × length): 120 × 465 mm Njdpfx Adoycfzkowecl Feed motor power: 60 W Machine dimensions: 880 × 720 × 1230 mm Net weight: 148 kg

Condition: used, Year of construction: 2003, Technical details: grinding diameter: 350 mm grinding length: 600 mm centre height: 175 mm grinding wheel hole diameter: 127 mm dimensions of grinding wheel: 400 x 50 mm Ncjdpfjya Ekmex Adwsl grinding spindle speed: 1.500, 1.700, 2.200 1/min work piece spindle speed: 6 - 600 1/min max. workpiece weight between centres: 150 kg grinding head swivelling: -30 bis +120 Grad grinding head swivellable ° table swivelabel ° table adjustment - longitudinal: 905 mm automatic feed per table reverse control:: 0,001 - 0,030 mm feed - continual: 0 - 0,99 mm table speeds: 0 - 6 m/min taper in tailstock: MK 4 tailstock travel: 30 mm diameter of internal spindle: 80 mm spindle drive motor: 3,6 kW spindle cone: MK 5 total connected load: ca. 7,5 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 3,2 x 2,1 m universal cylindrical grinding machine, internal grinding attachment incl. spindle, HEIDENHAIN DRO in 2 axis, balancing device ELASO EB 2000, ASYST APNC 400 NC-dressing and programming unit, cooland device incl. paperfilter, manuals (German language), a lot of accessories (grinding wheels (external+internal), steady, pusher dog, collets, chucks, balancing device, dresser...) MACHINE FROM TOOLSHOP, BARELY USED ! *

Condition: excellent (used), grinding length 600 mm grinding width 250 mm workpiece height 450 mm Control Siemens Primo SG magnetic clamping plate, electical 500 x 200 mm grinding wheel diameter 300 x 50 x 76,2 mm Nsdpfx Adjya Iifswocl spindle turning speed - stepless 800 - 4200 U/min total power requirement 4 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 4,8 x 3,6 x 2,1 m

Condition: used, Type: SMH 060 Njdpfx Adst Iv Tyjwjcl Band saw blade grinding machine. Strip width up to: 60 [mm]. Power: 400 [V] / 50 [Hz]. For removing the weld bur from butt welded joints. In used condition, cleaned, repainted and tested.  2 pcs on stock.

Condition: used, Used machine Ncodpoxwz N Ssfx Adwel Condition: age-appropriate Table size: 2,600 x 900 mm Maximum usable grinding length: 2,500 mm Belt size: 7,100 mm x 150 mm 1,100 mm throat on the right Motor: 5.2 kW Shipping dimensions: 4,300 x 1,650 x 1,800 mm Weight: 620 kg Availability: approx. mid/end of January 2026 Stock location: Frankfurt

Condition: used, Year of construction: 2002, functionality: fully functional, Grinding machine Brand: Studer Model: S20 Favorit Year: 2002 Nodpeyc Tc Nefx Adwscl

Condition: good (used), Year of construction: 2021, functionality: fully functional, Used grinding line for circular saw blades Model: 2 × PRESTIGE (HSS/CERMET grinding machines) + 1 × LOAD-5 (5-station automatic loader) Condition: Used, in good technical and visual condition Ncodpfx Asxx Ix Aodwol Saw blades: Ø250–630 mm

Condition: used, Technical data: Speed: 3000 1/min Connection: 400 V Motor power: 0,37 kW Dimensions, approx.: 680 x 380 x 380 mm Ncsdpfxspz Ibws Adwel

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 1,600 mm, grinding width: 600 mm, New High-Precision Surface Grinding Machine, Kraft brand, Type FS 16060 SD Grinding area: 1600 x 600 mm Main Technical Data - Grinding length: 1,600 mm - Grinding width: 600 mm - Distance from table surface to spindle center: 820 mm - Table drive: Hydraulic - Table load (incl. magnetic chuck): 1,230 kg - Table speed, infinitely adjustable: 5–25 m/min - Max. table travel: 1,700 mm - Max. cross feed speed: 2,000 mm/min - Maximum cross travel: 610 mm Ncedjyak H Hopfx Adwjl - Max. vertical feed speed: 2,000 mm/min - Grinding spindle motor: 22 kW - Grinding wheel dimensions: 500 x 75 x 304.2 mm - Grinding spindle speed: infinitely variable - Machine weight (net): 8,500 kg - Machine width: 7,500 mm - Machine depth: 3,400 mm - Machine height: 2,700 mm - Electrical connection: 400 V / 50 Hz Features: see attachment. Standard Accessories: - 1 Standard grinding wheel 500x75x302.4 mm - 1 Standard wheel flange - 1 Wheel dresser incl. diamond dresser - 1 Balancing arbor - 1 Balancing stand - 1 Machine lamp - 1 Set of machine tools - 1 Documentation package incl. spare parts list - Machine in CE version (Metric version) Equipment features: - Surface grinding machine with automatic vertical feed - Grinding cycle: roughing – finishing – spark-out - Siemens S700 touchscreen panel and electronic handwheel for Y-axis - Digital readout for vertical axis Y and cross axis Z - Grinding spindle drive 22 kW (including stepless speed regulation) - Electro-magnetic chuck combination (L 1600 x W 600 mm) - Magnetic plate supply unit - Coolant filtration system (incl. coolant tank, paper band filter, and pressure pump) Installed special accessories: - 1 Additional wheel flange for 500 x 75 x 302.4 mm grinding wheel - 1 Full enclosure. Completely closed machine cover with manually operated sliding doors incl. safety interlock - 1 Wheel dressing unit mounted on the spindle head (for straight dressing of the grinding wheel) - 1 Coolant mist extraction unit incl. base frame Precision and surface quality at an optimal price. Fully equipped and ready for grinding, suitable for universal use in a wide range of industrial and application sectors.

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 500 mm, grinding width: 250 mm, New High-Precision Surface Grinding Machine of the “Optimal” Series Grinding area: 500 x 250 mm Features: Nsdpfoyak Dljx Adwecl ● Surface grinding machine with automatic vertical feed ● Grinding process: roughing – finishing – spark-out ● Siemens S700 touchscreen panel and electronic handwheel for Y-axis ● Digital readout on vertical axis Y and cross axis Z ● Table cover and splash guards made of stainless steel ● Electrical control cabinet mainly equipped with Siemens components ● Including handwheel dressing device, electro-magnetic chuck, and coolant filtration system Main technical data: Grinding length mm 500 Grinding width mm 250 Distance table surface to spindle center mm 450 Table drive Hydraulic Table load capacity kg 180 Longitudinal movement X Table speed, infinitely variable m/min 7 – 23 Max. longitudinal travel mm 560 Cross movement Z Max. traversing speed mm/min 990 Max. cross travel mm 275 Vertical movement Y Max. traversing speed mm/min 460 Grinding spindle/grinding wheel Grinding spindle drive power kW 2.2 Grinding wheel dimensions mm 200x20x31.75 Grinding spindle speed (speed control optional) rpm 2850 Dimensions Net machine weight kg 1800 Machine dimensions (incl. table movement) Width mm 2300 Depth mm 1650 Height mm 1680 Power connection kW 3.7 All models include standard accessories: ● 1 standard grinding wheel ● 1 wheel arbor ● 1 dressing block incl. diamond ● 1 balancing arbor ● 1 balancing stand ● 1 machine lamp ● 1 set of machine tools ● 1 set of documentation including spare parts list ● CE-compliant machine (metric version) Precision and surface quality at an optimal price. Fully equipped for universal use in a wide range of industrial and application sectors.

Condition: like new (used), Year of construction: 2022, functionality: limited functionality, grinding length: 450 mm, grinding width: 150 mm, table length: 450 mm, table load: 120 kg, table width: 150 mm, grinding spindle speed: 3,000 rpm, Surface Grinding Machine from Showroom (new) Manufacturer: Okamoto Model: ACC-450 AV (open design) Year of manufacture: 2022 Control: Okamoto FX Operating hours: 0 S/N: XXXX Technical specifications: ----- • Table size: 450x150 mm • Table travel longitudinal/cross: 530x165 mm • Max. table load: 120 kg • Max. grinding height table / new wheel: 397.5 mm • Standard magnetic chuck: 450x150 mm (P=13mm) • Automatic infeed: 0.0001–0.030 mm • Manual micro feed: 0.0001 / 0.001 / 0.01 mm • Spark-out strokes: 0–5 • Rapid traverse: 600 mm/min • Grinding wheel: 205 x 6–19 x 31.75 mm • Speed: 3,000 rpm • Grinding spindle motor: 1.5 kW • Connected load: 7 kVA • Dimensions: 2,000 x 1,430 x 2,265 mm • Machine weight: 1,250 kg Accessories: ----- • Grinding wheel on flange (new) • Paper band filter with 160 l tank Ncedox U Dawepfx Adwel • Table dresser + diamond • Work light • Tool kit • Operating manuals

Condition: used, Year of construction: 2012, functionality: fully functional, NEPTUN ROCK 11 – Year 2012 Straight line edge grinder with 11 wheels for flat edges, Thickness 3-40 mm Speed 0.5-5 m/min. Power 25 kW Ncjdjx Tif Nepfx Adwjl Overall dimensions 8089 x 2340 x 1450 mm Weight 3500 kg

Condition: used, grinding length / mm grinding width / mm workpiece height / mm Nedsxxb Nbopfx Adwecl total power requirement / kW weight of the machine ca. / t required space / m

Condition: new, Year of construction: 2025, weight 540 kg diameter 1200 mm height 1100 mm 0 382 l total power requirement 1,9 kW voltage 350/50 V length in total 1820 mm Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. This type of machine has a large sieve surface and allows easy separation of the workpieces from the grinding stones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) Ncjdjuddbvjpfx Adwjl The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: new, Year of construction: 2025, weight 1350 kg diameter 1760 mm height 1240 mm 0 1210 l Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. These type of machines have large screen area and allow easy separation of work pieces from the grindstones. Optional Accesories Nedpfxsuddcto Adwocl - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.